Log message:
*: revebump for new brotli option for freetype2

Addresses PR 57693

Log message:
*: Recursive revbup from graphics/freetype2

Log message:
cad: Replace RMD160 checksums with BLAKE2s checksums

All checksums have been double-checked against existing RMD160 and
SHA512 hashes

Log message:
cad: Remove SHA1 hashes for distfiles

Log message:
*: revbump after fontconfig bl3 changes (libuuid removal)

Log message:
all: migrate some SourceForge homepage URLs back from https to http

https://mail-index.netbsd.org/pkgsrc-changes/2020/01/18/msg205146.html

In the above commit, the homepage URLs were migrated from http to https,
assuming that SourceForge would use the same host names for both http and
https connections. This assumption was wrong. Their documentation at
https://sourceforge.net/p/forge/documentation/Custom%20VHOSTs/ states
that the https URLs use the domain sourceforge.io instead.

To make the homepages from the above commit reachable again, pkglint has
been extended to check for reachable homepages. This check is only
enabled when the --network command line option is given.

Each of the homepages that referred to https://$project.sourceforge.net
before was migrated to https://$project.sourceforge.io (27), and if that
was not reachable, to the fallback URL http://$project.sourceforge.net
(163).

Log message:
all: migrate several HOMEPAGEs to https

pkglint --only "https instead of http" -r -F

With manual adjustments afterwards since pkglint 19.4.4 fixed a few
indentations in unrelated lines.

This mainly affects projects hosted at SourceForce, as well as
freedesktop.org, CTAN and GNU.

Log message:
Recursive bumps for fontconfig and libzip dependency changes.

Log message:
Switch from cad/verilog to cad/iverilog

No PKGREVISION bump as it was update as while ago.

Log message:
Update cad/covered from 0.4.7 to 0.7.10

Local changes:
 - set LICENSE (gnu-gpl-v2)
 - replace DEPENDS of verilog to blk3
 - stop replacing shebang for WISH - no longer needed
 - stop helping to find tclConfig.sh and tkConfig.sh - no longer needed
 - comment rationale for -DUSE_INTERP_RESULT (TCL/TK compatibility)
 - drop patch-src_lxt2__read.c - fixed upstream (differently)
 - comment and regenerate patch-src_lxt2__read.h

Upstream changelog (partial changes prior 0.7 not known)
==================
0.7.10
Stable release covered-0.7.10 made. This release updates the FST library to the \ 
latest version which contains some fixes and enhancements.

Stable release covered-0.7.9
11/21/2010 01:03 AM Filed in: Releases
Stable release covered-0.7.9 made. This release is a bug fix and minor feature \ 
enhancement release. Here are the details:

    Cleaned up error messages emitted from the clang utility.
    Updated GUI to use the ttk styled widgets for a more uniform look and allows \ 
the user to change the overall look of the GUI using a preference item.
    Handling issue where a CDD file was created in a different directory and we \ 
attempt to load it in a different environment. Previously, a stack trace was \ 
emitted rather than just the user error message.
    Updated copyright dates to include 2010
    Added FST dumpfile scoring (new -fst option added to the score command to \ 
accommodate this option).
    Adding support for "wire real" and associated code to Verilog parser.
    Fixing issue with memory coverage.
    Fixing bug 3054545. When a merged CDD file was used in an exclude command, a \ 
segmentation fault would occur.
    Added support for constant assignment to reals.
    Added support for "parameter integer" and "parameter real".
    Added parsing support for the $fopenw system task.
    Added support for performing +: and -: part selection on the left-hand-side \ 
of assignment expressions.
    Fixed various memory overrun and memory leak issues that caused instability \ 
issues within the GUI.
    Fixed GUI combinational logic issue where incorrect highlighting/underlining \ 
was occurring for uncovered expressions.
    Fixed GUI issue with next/previous button traversal for combinational logic.
    Enhanced the regression suite to verify all of the new features mentioned above.
    Updated user guide HTML output to include the Covered banner to the top of \ 
each page.
    User guide and man pages have been updated per these changes.

On a side note, active work on Covered's development branch(es) has stopped \ 
indefinitely. I plan to support the current feature set in the 0.7.x branch with \ 
possible minor enhancements as requested. Please feel free to continue to send \ 
me e-mail and/or submit bug reports against the 0.7.x stable releases.

Stable release covered-0.7.8
03/24/2010 10:20 PM Filed in: Releases
Stable release covered-0.7.8 made. This release is primarily a bug fix release, \ 
but it does contain a few new
minor features and Verilog language enhancements. Here are the details:

    Fixed bug 2912587. Using the -f option with the merge command was causing errors.
    Fixed bug 2912679. If the GUI was invoked (i.e., covered report -view) and \ 
an error in command-line parsing occurred, Covered segfaulted.
    Added ability to specify the CDD on the report command-line when starting \ 
the GUI (i.e., covered report -view foobar.cdd) which will automatically load \ 
the specified CDD files into the GUI on startup. Feature request 2912698.
    Fixed bug 2925756. An expression surrounded by the parenthesis could cause a \ 
segmentation fault when parsing.
    Support has been added for NC-Verilog VPI usage.
    Fixed bug 2926579. Changing from a known value to an X value should cause no \ 
change in toggle coverage; however, when we transition back to a known value and \ 
it differs from the previously known value, we record a toggle coverage change. \ 
Example: 0 -> X -> 0 (no change in coverage), 0 -> X -> 1 (change in \ 
coverage).
    Fixed bug 2927285. Segmentation faults could occur when excluding FSM and \ 
combinational logic cases.
    Added support for the $clog system function call.
    Fixed bug 2929948. Assignments to a concatentation of signals could lead to \ 
segmentation fault.
    Fixed issue in the LXT2 reader that resulted in a memory leak.
    Fixed bug 2933112. Added full support for out-of-bounds assignment.
    Added new -T global option that provides a "terse" output which \ 
outputs the Covered header and warnings/errors only (less output than using none \ 
of the global output verbosity options). Feature request 2952492.
    Fixed bug 2960887. Adds support for creating a definition which contains no \ 
user value (i.e., `define FOO). Covered was incorrectly assigning a value of 1 \ 
to these types of defines.
    Fixed bug 2958529. Zero width replications are now supported by Covered \ 
(i.e., {0{a & b}})
    Fixed bug 2974860. Fixed issue with FSM state input/output variables being \ 
output to an ASCII report file correctly.
    Added ability to allow the "trans" parameter to Covered FSM \ 
attributes to contain additional characters after it. Some simulators don't like \ 
Verilog attributes having the same name for multiple parameters. Feature request \ 
2976039.
    User guide has been updated per these changes.

Development release covered-20091126
11/26/2009 10:10 PM Filed in: Releases
Development release covered-20091126 made. This is a bug fix release only.

Stable release covered-0.7.7
10/24/2009 10:09 PM Filed in: Releases
Stable release covered-0.7.7 made. This is a bug fix release only.

    Fixed compilation warnings when compiling on 64-bit Mac OS X and \ 
Debian-based platforms.
    Updates to build scripts to help downstream Debian releases builds.
    Fixed bug 2880705. $Id: keywords containing newlines are now handled \ 
properly. Additionally, fixing issues with multiply instantiated modules within \ 
a generate block.
    Fixed bug 2881869. Fixed a stack overflow issue in the gen_item_resolve \ 
function that would cause segmentation faults when too many items were being \ 
generated within a single generate block.
    Fixed bug 2882433. Fixed the "ERROR! Parameter used in expression but \ 
not defined in current module" error when a generated module instance has a \ 
parameter override of a parameter with the same name as the parameter within the \ 
module that contains the generate block.

Stable release covered-0.7.6
08/24/2009 10:12 PM Filed in: Releases
Stable release covered-0.7.6 made. This is a bug fix release only.

    Fixed misspelling in report generator code (misspelling showed up in text \ 
reports)
    Fixed issues with performing module merging with modules containing generate \ 
blocks configured differently for different instantiations of the same module.

Stable release covered-0.7.5
08/02/2009 10:20 PM Filed in: Releases
Stable release covered-0.7.5 made. This is a bug fix release only.

    Fixed bug 2808818. If a generate variable name collided with a reg/wire \ 
name, Covered was not emitting an error.
    Fixed bug 2808820. If no signal was used from the dumpfile and at least one \ 
signal needs information from the dumpfile, Covered needed to signal a user \ 
error.
    Fixed bug 2812321. Parameterized/generated modules could get incorrect \ 
coverage calculated for them.
    Fixed bug 2812495. Fixed a crash issue. There is another part to this bug \ 
report that is not fixed, however.
    Fixed bug 2813405. A design run with the -g score option caused the GUI to \ 
freeze when viewed.
    Fixed bug 2813948. Fixed assertion issue with merging scored and unscored \ 
CDD files.

Development release covered-20090802
08/02/2009 10:19 PM Filed in: Releases
Development release covered-20090802 made. This development release adds several \ 
performance enhancements and bug fixes to the new inlined code coverage flow, \ 
including the following:

    Adding support for $random and $urandom system calls to inlined coverage.
    Includes all fixes made to the stable 0.7.5 release.
    Adding support for $value$plusargs system calls to inlined coverage.
    Fixing issue with generated IF statements.
    Added user documentation for inlined coverage flow and score options.
    Fixing issue with generated code interrupting comma-separated assign statements.
    Performed code simplification and performance improvement with the way \ 
statements were handled internally.
    Removed unnecessary calls to simulation functions when using inlined code \ 
coverage (this added a performance penalty).
    Improved performance of inlined code generator for sizing generated signals.
    Fixed memory indexing issues related to memory coverage.
    Added support for static function and static ternary operators for inlined \ 
code coverage.
    Added code to differentiate functions used statically and not to do the \ 
right thing for inlined code coverage accumulation.
    Added vcd_diff script which checks the dumpfile output from non-inlined and \ 
inlined design files to verify that the inlined code generator does not change \ 
the result. This check is now a part of all inlined regression runs.
    Made several performance improvements to the VCD file reader. The reader is \ 
now 10-20% faster.
    Added support for Verilator regressions runs and ported a couple of \ 
diagnostics to Verilator format.
    Adding check to make sure that a CDD file without inlined mode set that \ 
reads a VCD file containing inlined coverage data emits an error to the user and \ 
exits gracefully.
    Added -inline-comb-depth score option to allow the user to specify a \ 
shallower combinational coverage depth to be generated -- improving inlined \ 
simulation and coverage performance.
    For Verilator runs, inserted pragmas around intermediate combinational logic \ 
expression signals to exclude them from being output to VCD files. This improves \ 
simulation and coverage performance for Verilator runs (other simulators that \ 
have a VPI that automatically remove these signals from generating change \ 
callbacks).
    Performing code replace of some actual code with pre-calculated intermediate \ 
expression values for further simulation performance improvements.
    Added "e" option to -inline-metrics which allows event coverage to \ 
be turned on/off independently of other combinational logic coverage. This \ 
allows further simulation and coverage performance improvements (especially for \ 
Verilator runs).
    Added optimization that causes code generation to be skipped for assertion \ 
files when assertion coverage is not required.
    Full regressions now runs cleanly with all code changes.

Stable release covered-0.7.4
06/17/2009 10:21 PM Filed in: Releases
Stable release covered-0.7.4 made. This is a bug fix release only.

    Updated regression files for the new 2.4 version of the OVL.
    Fixed bug 2804585. Memory reads in LHS part selects were not being marked \ 
for memory coverage.
    Fixed issue with VPI usage in a VCS simulation with generate statements.
    Fixed bug 2805191. Automatic tasks/functions that manipulate variables \ 
outside of the task/function can cause incorrect toggle coverage for those \ 
signals.
    Fixed bug 2806855. Generate blocks generating module instantiations could \ 
lead to score command errors (segfaults, internal assertion errors, etc.)

Stable release covered-0.7.3
06/04/2009 10:22 PM Filed in: Releases
Stable release covered-0.7.3 made. This primarily fixes a few bugs in the \ 
compile of Covered "out of the box". It seems that even with the \ 
regression testbench, things can still slip through the cracks :( Anyhow, please \ 
use this release instead of the 0.7.2 release.

Stable release covered-0.7.2
05/09/2009 10:23 PM Filed in: Releases
Stable release covered-0.7.2 made. This is primarily a bug fix release with a \ 
few new features added to the CLI. Here are the details of the changes.

    Fixed bug 2791651. Memory deallocation errors occurred when syntax errors \ 
were being reported by the parser.
    Fixed bug 2791599. Whitespace prior to a `line or #line directive were not \ 
being handled properly.
    Fixed bug 2794588. If a module was specified in a -v option after its \ 
directory was specified by the -y option to the score command, the module was \ 
not found for parsing.
    Fixed bug 2794684. If a normal (not generate) case statement within a \ 
generate block will output the case expression to be output to the CDD more than \ 
once, leading to internal assertion errors when the CDD file is read.
    Fixed bug 2795088. When a CDD file is opened from the wizard GUI window, the \ 
open file window can be placed behind the wizard window. Instead the wizard \ 
window should disappear once a selection button has been clicked.
    Fixed bug 2795086. If the user clicked on the global exclusion reason \ 
listbox when it is empty, a Tcl/Tk error message box was raised.
    Fixed bug 2795089. If the GUI detailed combinational logic window is used to \ 
view several expressions one after the other, Covered can segfault.
    Fixed bug 2795583. Score command segfaults when a module is instantiated \ 
within a generate block and overrides a parameter value within the module.
    Fixed bug 2795640. Variables instantiated within a generate block caused \ 
issues with Covered when simulated with VCS.
    Fixed bug where memory elements being assigned via non-blocking assignments \ 
were not being evaluated, leading to incorrect coverage output.
    CLI updates/fixes:

        When the 'debug on' command is specified, a line specifying that the \ 
debug mode is now on is output (previously nothing was output (because the debug \ 
mode was off).
        Changed the 'debug on' command to 'debug less' and 'debug more' where \ 
the prior only outputs the executed statements and timestep information during \ 
simulation while the latter outputs what 'debug on' used to output (extremely \ 
verbose).
        Fixed bug 2795209. When an unknown CLI command was specified, a memory \ 
error occurred.
        Fixed bug 2795215. Status bar was attempting to be output during \ 
simulation when debug mode was turned on. This created some unreadable/messy \ 
output.
        Changed the 'goto ' command to 'goto time '.
        Added 'goto line [:]' command which simulates until the specified line \ 
number is about to be simulated.
        Added 'goto expr ' command which simulates until the given expression \ 
evaluates to a value of true.
        Added support for handling the Ctrl-C interrupt when the score command \ 
is simulating with the -cli option specified. In this case, simulation will \ 
immediately stop and return a CLI prompt which will allow the user to continue \ 
interacting with the simulation.

    Updated user guide documentation to include the changes made to the CLI.

Stable release covered-0.7.1
05/07/2009 10:24 PM Filed in: Releases
Stable release covered-0.7.1 made. This is a bug fix release only. Here are the \ 
details:

    Fixed bug 2782473. CDD files being merged from different testbenches but \ 
with similar leading hierarchy (but different top-level modules) which would \ 
lead to internal assertion errors.
    Fixed bug 2785453. Wires declared in generated named scopes were not handled \ 
correctly by Covered in VPI mode of operation, leading to inaccurate coverage \ 
information.
    Fixed bug 2786986. An always block with a part select in the sensitivity \ 
list was triggering on the entire signal change rather than the specific part \ 
select, leading to a potential degradation in performance and inaccuracy in \ 
coverage information.
    Allow time variable types to be included for coverage.
    Fixing permission issue with the install-sh script that some people would \ 
get after first downloading and installing.
    Updated README and INSTALL files to be more accurate.
    Fixed coverage accuracy issue for code that uses variable part selects in \ 
LHS of expressions.

Stable release covered-0.7
04/26/2009 10:24 PM Filed in: Releases
Stable release covered-0.7 made. This is a significant improvement over the 0.6 \ 
release, providing Verilog language enhancements, significant score \ 
optimizations, new rank and exclude commands, an enhanced merging capability, a \ 
multitude of GUI enhancements, a complete overhaul of the user documentation, \ 
many bug fixes, and much more.