Log message:
binutils: fix typo in comment.

Log message:
binutils: import NetBSD/aarch64 support patches for ld from src.

This fixes the build on NetBSD/aarch64.

Log message:
binutils: add upstream fixes for CVE-2021-45078.

From upstream commit log:

PR28694, Out-of-bounds write in stab_xcoff_builtin_type

PR 28694
* stabs.c (stab_xcoff_builtin_type): Make typenum unsigned.
Negate typenum earlier, simplifying bounds checking.  Correct
off-by-one indexing.  Adjust switch cases.

Log message:
archivers: Replace RMD160 checksums with BLAKE2s checksums

All checksums have been double-checked against existing RMD160 and
SHA512 hashes

Could not be committed due to merge conflict:
devel/py-traitlets/distinfo

The following distfiles were unfetchable (note: some may be only fetched
conditionally):

./devel/pvs/distinfo pvs-3.2-solaris.tgz
./devel/eclipse/distinfo eclipse-sourceBuild-srcIncluded-3.0.1.zip

Log message:
devel: Remove SHA1 hashes for distfiles

Log message:
binutils: update to 2.37.

This release contains numerous bug fixes, and also the following
new features:

  * The GNU Binutils sources now requires a C99 compiler and library to
    build.

  * Support for the arm-symbianelf format has been removed.

  * Support for Realm Management Extension (RME) for AArch64 has been
    added.

  * A new linker option '-z report-relative-reloc' for x86 ELF targets
    has been added to report dynamic relative relocations.

  * A new linker option '-z start-stop-gc' has been added to disable
    special treatment of __start_*/__stop_* references when
    --gc-sections.

  * A new linker options '-Bno-symbolic' has been added which will
    cancel the '-Bsymbolic' and '-Bsymbolic-functions' options.

  * The readelf tool has a new command line option which can be used to
    specify how the numeric values of symbols are reported.
    --sym-base=0|8|10|16 tells readelf to display the values in base 8,
    base 10 or base 16.  A sym base of 0 represents the default action
    of displaying values under 10000 in base 10 and values above that in
    base 16.

  * A new format has been added to the nm program.  Specifying
    '--format=just-symbols' (or just using -j) will tell the program to
    only display symbol names and nothing else.

  * A new command line option '--keep-section-symbols' has been added to
    objcopy and strip.  This stops the removal of unused section symbols
    when the file is copied.  Removing these symbols saves space, but
    sometimes they are needed by other tools.

  * The '--weaken', '--weaken-symbol' and '--weaken-symbols' options
    supported by objcopy now make undefined symbols weak on targets that
    support weak symbols.

  * Readelf and objdump can now display and use the contents of .debug_sup
    sections.

  * Readelf and objdump will now follow links to separate debug info
    files by default.  This behaviour can be stopped via the use of the
    new '-wN' or '--debug-dump=no-follow-links' options for readelf and
    the '-WN' or '--dwarf=no-follow-links' options for objdump.  Also
    the old behaviour can be restored by the use of the
    '--enable-follow-debug-links=no' configure time option.

    The semantics of the =follow-links option have also been slightly
    changed.  When enabled, the option allows for the loading of symbol
    tables and string tables from the separate files which can be used
    to enhance the information displayed when dumping other sections,
    but it does not automatically imply that information from the
    separate files should be displayed.

    If other debug section display options are also enabled (eg
    '--debug-dump=info') then the contents of matching sections in both
    the main file and the separate debuginfo file *will* be displayed.
    This is because in most cases the debug section will only be present
    in one of the files.

    If however non-debug section display options are enabled (eg
    '--sections') then the contents of matching parts of the separate
    debuginfo file will *not* be displayed.  This is because in most
    cases the user probably only wanted to load the symbol information
    from the separate debuginfo file.  In order to change this behaviour
    a new command line option --process-links can be used.  This will
    allow di0pslay options to applied to both the main file and any
    separate debuginfo files.

  * Nm has a new command line option: '--quiet'.  This suppresses "no
    symbols" diagnostic.

Log message:
*: recursive bump for perl 5.34

Log message:
binutils: update to 2.36.1.

Changes in 2.36.1:

2021-01-26  Frederic Cambus  <fred@statdns.com>

	* objcopy.c (copy_main): Fix a double free happening when both
	--localize-symbols and --globalize-symbols options are invoked
	together.

gas changes in 2.36.1:

2021-02-05  Nelson Chu  <nelson.chu@sifive.com>

	* config/tc-riscv.c (riscv_multi_subset_supports): Removed
	INSN_CLASS_ZB*.
	* testsuite/gas/riscv/bitmanip-insns-32.d: Removed.
	* testsuite/gas/riscv/bitmanip-insns-64.d: Removed.
	* testsuite/gas/riscv/bitmanip-insns.s: Removed.

2021-01-26  Alan Modra  <amodra@gmail.com>

	PR 27282
	* testsuite/gas/all/none.d: Replace skip with xfail, don't xfail ft32.
	* testsuite/gas/elf/pr27228.d: xfail hppa and allow OBJECT match.

2021-01-26  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/27243
	* config/tc-nios2.c (md_begin): Don't disable relaxation with
	--gdwarf-N.
	* testsuite/gas/nios2/relax.d: New file.
	* testsuite/gas/nios2/relax.s: Likewise.

2021-01-24  H.J. Lu  <hongjiu.lu@intel.com>

	PR gas/27228
	* testsuite/gas/elf/elf.exp: Run pr27228.
	* testsuite/gas/elf/pr27228.d: New file.
	* testsuite/gas/elf/pr27228.s: Likewise.

ld changes in 2.36.1:

2021-02-04  H.J. Lu  <hongjiu.lu@intel.com>

	PR ld/15146
	* testsuite/ld-plugin/lto.exp: Run PR ld/15146 tests.
	* testsuite/ld-plugin/pr15146.d: Restored.
	* testsuite/ld-plugin/pr15146a.c: Likewise.
	* testsuite/ld-plugin/pr15146b.c: Likewise.
	* testsuite/ld-plugin/pr15146c.c: Likewise.
	* testsuite/ld-plugin/pr15146d.c: Likewise.

2021-02-04  Alan Modra  <amodra@gmail.com>

	* testsuite/ld-plugin/pr27311d.c: New test.
	* testsuite/ld-plugin/lto.exp: Rename pr27311 to pr27311-1, compile
	and link new test as pr27311-2.

2021-02-03  Alan Modra  <amodra@gmail.com>

	Apply from mainline
	2021-02-03  Alan Modra  <amodra@gmail.com>
	* testsuite/ld-ifunc/ifunc.exp (libpr16467b.so, libpr16467bn.so):
	Link with --as-needed.

	2021-02-02  Alan Modra  <amodra@gmail.com>
	* testsuite/ld-plugin/pr27311.d,
	* testsuite/ld-plugin/pr27311.ver,
	* testsuite/ld-plugin/pr27311a.c,
	* testsuite/ld-plugin/pr27311b.c,
	* testsuite/ld-plugin/pr27311c.c: New testcase.
	* testsuite/ld-plugin/lto.exp: Run it.  Correct PR14918 and
	PR12982 entries.

2021-01-28  Alan Modra  <amodra@gmail.com>

	PR 27259
	* ldelf.c (ldelf_before_place_orphans): Use linker_mark to
	prevent endless looping of linked-to sections.

2021-01-29  Alan Modra  <amodra@gmail.com>

	* testsuite/ld-tic6x/tic6x.exp: Add pr27271 test.

2021-01-27  Nick Clifton  <nickc@redhat.com>

	Import from mainline:
	2021-01-25  Fangrui Song  <maskray@google.com>

	PR ld/27230
	* scripttempl/DWARF.sc: Add DWARF-5 .debug_* sections.

Log message:
binutils: Improve gas/gld handling and cleanup.

Add a new "disable-ld" option that disables ld.  This is required on Darwin
where it is not currently built, but is also required for some SunOS setups
where an external GCC is used and we do not want a libgcc dependency on it.

There are now two ld-related PLIST variables, "gld" for the general \ 
handling
of whether GNU ld is built or not, and "ld" for the symlinks we create.

In addition Darwin also needs --disable-libctf to avoid a build issue, and an
additional PLIST variable to handle GNU as which is also not built on Darwin.

While here clean up a bunch of variable handling and NetBSD 5/6 workarounds,
and simplify the setup of SYMLINK_FILES.

Fixes build on Darwin, and SunOS when using an external GCC.  Ok fcambus@

Log message:
binutils: Fix PLIST.ld

The way this is managed is gld is still installed, it's just that we do not
create the ld -> gld symlinks on SunOS so that it is not accidentally used
depending on the $PATH.

This may need tweaking for Darwin, but it's less critical there.