Log Message:
ham/uhd updated from 3.9.4 to 3.11.0.0 (sorry for 170 lines of CHANGELOG)

(pkgsrc changes)
 - All patches/* are dropped now.

(upstream)
Change Log for Releases
==============================
## 003.011.000.000
* N310: Added driver
* UBX: Add support for CAL antenna for Rev E
* Added the module peripheral manager (MPM) with all subcomponents (N310
  drivers, mpm_shell, RPC server, BIST, etc.)
* UHD: Added rpclib as a internally tracked dependency
* UHD: Reduced the usage of Boost
* UHD: Updated uhd_images_downloader: Now uses more elaborate manifest to
  optimize downloads
* UHD: Introduced uhdlib internal include paths
* UHD: Add support for configuration files. USRP settings can now be set using
  a uhd.conf file in addition to device args
* UHD: Add narrow and narrow_cast
* gr-usrptest: Various bugfixes
* Updated required Vivado version to 2017.4
* Updated all license headers to use SPDX identifiers and correctly identify
  Ettus Research as part of National Instruments
* This release includes all bugfixes and features from previous releases, in
  particular, the 3.10.* release cycle

## 003.010.003.000

* X300
** Fix max rate calculation for 1 GbE
** Fix for DAC synchronization errors (unexpected FIFO depth)
** Reduced CPU usage during TX
* N230
** Properly initialize request structure before discovery
* B200
** FX3 firmware performance opitimizations
** Fixed sequence error on second TX burst
* TwinRX
** Added ADF5356 synth and Rev C support
* UBX
** Add implementation of TDD xcvr_mode and for TX PA on in TDD mode (to reduce \ 
transient on older revs)
** Add support for UBX-TDD
* C API
** Fixed dboard EEPROM revision error handling
** Make uhd_rx_streamer_last_error use SAFE_C
** Better error handling in uhd_usrp_get_[t/r]x_stream
* RFNoC
** Fix ctrl_iface to pop sequence numbers only after success
** Fix sequence number error message in ctrl_iface
** FPGA fix for sr_read() failure to ack errors
** FPGA fix for repeated sequence number for RX packets with 1 sample
** FPGA fix for axi_serializer edge case
* Docs
** Fixed B200 power LED description
** Update README application links
* UHD
** Utilize poll() instead of select() for UDP transports where possible to avoid \ 
descirptor limits
** Fix build with Boost 1.66
** Add EEPROM info to dboard_base class so daughterboard code can access all \ 
EEPROM info

## 003.010.002.000

* multi_usrp: Fixed get_normalized_tx_gain.
* E300: Fix for streamer recreation issue. Reduced minimum timeout, fixed
        potential race condition.
* X300: Fix for network discovery, will now return early when correct serial is
        found. Fixed issue with DAC sync. All async messages now go through
        single DMA channel on PCIe. Improved TX performance. Fixed page size
        acquisition for PCIe. Fixed some FW communication errors. Improved flow
        control. Removed MTU throttling. Legacy compat falls back to min spp
        for mixed transport types.
* CBX: Fixed LO LPF behaviour in 1.5-2 GHz range.
* UBX: Fixed dtor SIGABRT issue. Better error handling for various dboard clock
       rates.
* TwinRX: Added LO reimport feature.
* GPSDO: Improved detection. Improved query_gpsdo sensor.
* RFNoC: Fixed issue with DDC and DUC command tick rate.
* UHD: Fixed potential memory leak in tasks. Fixed get_normalized_tx_gain().
       Fixed default socket buffer size to honor MTU.
* Examples: Added channel param to samps to/from file. sync_to_gps exits
            instead of uncaught throw. latency_test improved output. Use
            next_pps in test_clock_synch. Added TwinRX FHSS example.
* Utils: Modified behaviour of uhd_images_downloader so it won't delete dirs
         when using -i
* Tools: Updates to CHDR dissector. Added set_time_source_out(). Fixed LO API.
* C API: Fixed some missing fields in USRP info.
* Docs: Many minor fixes. Fixed Doxygen warnings related to /* in files.
* CMake: Fixed GCC 4.4 compilation issue. Added ability to specify package
         names.

## 003.010.001.001

- Docs: The protocol for Gen-3 devices is now consistently referred to as CHDR.
- X300: Fixed EEPROM corruption bug (happened when two processes would access
  find routines on the same device at the same time). Improved initialization
  time. CE clock is now 214 MHz. Fixed channel list generation. Find routines
  now more lenient in case one devices fails (others can still be found then).
  Improve PCIe behaviour. Fix timed commands for non-TwinRX dboards. Improve
  AXI Interconnect (faster, improved build timing).
- N230: Use second_addr (like X300).
- C API: Added UHD_VERSION macro. Fixed online rate change.
- Utils: Minor fixes to uhd_images_downloader.
- Build/CMake: Fixed some Py3k build issues. Fixed many compiler warnings. Allow
  to specify package names.
- RFNoC: Fixed sampling rate mismatch error. Noc-Shell uses a non-cascaded 2-clk
  FIFO. Increase default FIFO sizes on DUC and DDC blocks.
- UBX: Force on RX driver to eliminate transient.
- Transport code: Fixed memory leak.
- FPGA repository: Merged usrp3_rfnoc and usrp3 directories again. Cleaned up
  superfluous files. Clean separation between Gen-3 and other devices in usrp3.

## 003.010.001.000

- Fixed multiple compiler warnings
- Multiple documentation fixes
- X300: RX strobe lines are always in sync on device initialization. DB EEPROM
  now properly written. ignore-cal-file no longer ignored. Fixed case where too
  large recv_frame_size settings could break things. Reduced ZPU clock speed
  (helps FPGA timing). Added area constraints for AXI interconnect. Improved
  halfband scaling in rx_frontend. Improved PCIe streaming reliability
- B2xx: Clear sequence numbers in idle state.
- RFNoC: Nodes disconnect on destruction. Fixed setting of correct bits on
  sr_error_policy. DDC does no longer clear timed commands on EOB. DUC fixed
  timed CORDIC tuning. Enable Noc-Shell response FIFOs (fixes simultaneous
  commands on multiple channels).
- UBX: Changed default performance parameters
- TwinRX: LEDs properly light up depending on channels. Fixed issue of multiple
  (redundant) writes. Simplified API steps for phase synchronization
- XCVR: Query dboard clock instead of DAC clock. Helps in X3x0s.
- GPS: Fixed message for case when no GPS is present. Fixed multiple GPS-related
  issues.
- Converters: Fixed floating point rounding error in tests.
- Utils: uhd_usrp_probe can now query vectors
- Fixed issue that prevented soft_regs working on 32-bit systems
- Tools: Merged dissectors into common directory.
- CMake: -Og is the default now for gcc-based Debug builds.

## 003.010.000.000
- Changed version string to quadruplets (Major.API.ABI.Patch)
- Minimum dependencies bumped for gcc, Boost, CMake, clang and Python.
- TwinRX: Added support. Includes LO API for multi_usrp.
- N230: Added support
- Added expert framework
- X300: Completely restructured to use RFNoC
- X300: FPGA builds include git hash, dual 10GigE receive is now supported
  (allows 2x200 Msps receive over 2x10GigE connections), DMA FIFO (over DRAM)
  now part of builds, added Aurora support
- WBX: Fixed bug that prevented LO locking with 50 MHz ref clock
- pkg-config: Added boost_system
- Utils: uhd_usrp_probe can query sensors, query_gpsdo_sensors: minor fixes,
  and cleanup
- Examples: Bugfixes in tx_waveforms, benchmark_rate measures timeouts,
- USB subsystem: Cleanups and minor bugfixes
- Added devtest infrastructure
- Converters: Added s8 and s16 data types
- Added more aggressive optimization strategies for FPGA builds
- Xilinx IP tool upgrade scripts cleaned up

## 003.009.005
- B200: Update DSPs after changing tick rate
- X300: Added option to disable ADC self test, prevent DAC from
  underrunning
- UBX: Fixed noise issues, reduced power consumption/heat, added codes for
  upcoming board revisions, force RX LNAs on (reduces rx settling time)
- WBX: Fixed rev2 and rev3 boards on X300
- Utils/Examples: Cleaned up query_gpsdo_sensors, test_dboard_coercion,
- Manual: Minor fixes and updates
- CMake: Fix lib64 detection, better platform detection, Doxygen may use shorter
  filenames
- Octoclock: GPSDO-related fixes, sequence number consistency fixes, UART
  fixes (off-by-one errors). uhd_usrp_probe will pick up an OC now,
  added Wireshark dissector for OC packets