Log message:
*: recursive bump for icu 74.1

Log message:
*: bump for openssl 3

Log message:
revbump after textproc/icu update

Log message:
*: bump PKGREVISION for libunistring shlib major bump

Log message:
dar: move option stuff to options.mk, remove PKGREVISION comment

Log message:
dar: fix dar-int32 option build by using DARBITS in PLIST

Log message:
Update archives/dar to version 2.7.7

Removed patch-a* to use the new
naming convention.
This version requires c++14 so
the patch concerning vector.assign()
missing in sunpro has been removed.
src/libdar/mask_list.hpp could not
be patched and the my_char method
does not exist anywhere in the
sources so the patch has been removed.
This version includes autotools
changes that have AM_LDFLAGS and
looks for getopt in unistd.h.
Added extra buildlink files so that
all deps are found.

Changes from Changelog:

from 2.7.6 to 2.7.7
- added support for sequential reading more of sliced backup, to
  accommodate tape support used with slices (at the opposite of dar_split)
- fixing few typos in doc
- making libdar more tolerant when calls to fadvise fail

from 2.7.5 to 2.7.6
- adding -f option to dar_cp
- adding static version of dar_cp (dar_cp_static) as compilation outcome
- added FAQ for tape usage with dar
- fixing error in libdar header file installation
- fixed bug met when interrupting the creation of a block compressed
  backup (always used by lzo compression and by other algorithm only
  when performing multi-threaded compression)
- typo fixes in documentation
- fixed message in lax mode used to obtain from the user the archive format
  when this information is corrupted in the archive.
- fixing lax mode condition that popped up without being requested
- fixing bug met when reading slice an special block device by mean of
  a symlink
- adapting sanity checks to the case of a backup read from a special
  device in sequential-read mode.
- fixed bug that lead dar to report CRC error while reading a backup
  from a pipe with the help of an isolated catalogue
- adding -V option to dar_split (was using -v) for homogeneity with
  other commands

from 2.7.4 to 2.7.5
- fixed double free error met when deciphering an archive with a
  wrong password/passphrase and when multi-threading is used.

from 2.7.3 to 2.7.4
- fixed excessive context control that led libdar to report a bug
  when an file-system I/O error was returned by the operating system
- fixed mini-digits auto-detection, which only worked when slice number 1
  was present, even if subsequent slices could be used to detect its
  value
- fixed typos and minor incoherence in documentation
- update version information to display libthreadar barrier implementation
  used, info available since its release 1.4.0

from 2.7.2 to 2.7.3
- fixed bug met when restoring files in sequential-read mode and feeding
  the backup to dar on its stdin: When dar had to remove a file that had
  been deleted at the time of the backup since the backup of reference
  was made, dar aborted the restoration reporting it could not skip
  backward on a pipe.
- adding call to kill() then join() in destructor of class slave_thread
  and fichier_libcurl to avoid the risk of SEGFAULT in rare conditions
  under Cygwin (Windows)
- fixed several typos in bug, messages and comments
- fixed script used to build windows binary to match recent cygwin dll
- fix spelling and improved clarity in dar_split messages

from 2.7.1 to 2.7.2
- fixed bug met when a user command returns an error while dar is
  saving fsa attributes of inodes (this conjunction make it an infrequent
  situation)
- fixed typo in documentation
- fixed remaining bug from 2.7.1 met when compiling dar/libdar with a
  compiler (clang-5.0 here) that requires a flag to activate C++14 support
  while complaining (for a good reason) when this flag is passed too while
  compiling C code.
- fixed self reported bug escape.cpp line 858 met when using lzo compression
  or multi-threaded compression while creating a backup to stdout.
- fixed bug met when creating a backup to stdout that lead libdar to corrupt
  data when trying to re-save a file uncompressed due to poor compression
  result
- fixed minor bug met when setting --mincompr to zero and using
  block_compressor (lzo algo or any algo in block compression): empty files
  were reported as truncated due to the lack of block header (compressed
  empty file being stored as an empty file)

from 2.7.0 to 2.7.1
- fixed compilation script to require support for C++14 due to new features
  introduces in 2.7.0 that rely on modern C++ constructions. Updated
  documentation accordingly about this updated requirement.
- fixed missing included header for compilation to suceed under MacOS X
- fixed typo in man page
- adding minor feature: storing the backup root (-R option) in the archive
  to be able to restore 'in place' thanks to the new -ap option that
  sets the -R path to the one stored in the archive.
- merging fixes an enhancements brought by release 2.6.15

from 2.6.x to 2.7.0
- using the truncate system call whenever possible in place of skipping
  back in the archive, when file need to re-save uncompressed,
  or when file has changed while it was read for backup
- improved slice name versus base name error, now substituting (rather than
  just asking the user) the first by the later when else it would lead
  to an execution error.
- auto-detecting min-digits at reading time in complement of the feature
  listed just above
- added the possibility to specify a gnupg key by mean of its key-id in
  addition to the email address it may be associated to, both for
  asymmetrical encryption and archive signing.
- added -b option to dar_split to set the I/O block size
- added -r option to dar_split to limit the transfer rate
- added -c option to dar_split to limit the number of tape to read
- new feature: zstd compression algorithm added
- replaced old and experimental multi-threaded implementation by
  production grade one. -G option may now receive an argument on
  command line for fine tuning. libdar API has been updated
  accordingly.
- added multi-threaded compression when using the new per block
  compression mode, the legacy streaming compression mode is still
  available (see both -G and -z option extended syntax).
- added lz4 compression algorithm.
- removed some deprecated/duplicated old options (--gzip,...)
- enhanced the delta signature calculation providing mean for the user
  to adapt the signature block size in regard to the file's size to
  delta-sig. "--delta sig" option received an extended syntax.
- increased timestamp precision from microsecond to nanosecond when the
  operating system supports it. It is still possible to use configure
  --enable-limit-time-accuracy=us at compilation time to use microsecond
  or even second accuracy even if the OS can support finer precision.
- added argon2 hashing algorithm for key derivation function (kdf) which
  becomes the default if libargon2 is available, else it defaults to sha1
  as for 2.6.x. When argon2 is used, kdf default iteration count is
  reduced to 10,000 (and stays 200,000 with sha1). This can be tuned
  as usual with --kdf-param option.
- adding support for statx() under Linux which let libdar save file's
  birthtime. Unfortunately unlike under BSD systems (FreeBSD, MACoS X,
  and so on), the utime/utimes/timensat call do not set birthtime, so
  you cannot restore birthtime on Linux's unlike under BSD systems
- AES becomes the default when gnupg is used without additional
  algorithm.
- new implementation of the libcurl API use for more efficient reuse of
  established sessions.
- You can now exclude/include per filesystem rather than just sticking
  to the current filesystem or ignoring filesystem boundary. -M option
  can now receive arguments.
- new feature: dar_manager can now change the compression algorithm of
  an existing database.
- Added a benchmark of dar versus tar and rsync for different use cases.
- documentation review, update, cleanup, restructured and beautification.

from 2.6.15 to 2.6.16
- fixed bug met when restoring files in sequential-read mode and feeding
  the backup to dar on its stdin: When dar had to remove a file that had
  been deleted at the time of the backup since the backup of reference
  was made, dar aborted the restoration reporting it could not skip
  backward on a pipe.
- adding call to kill() then join() in destructor of class slave_thread
  and fichier_libcurl to avoid the risk of SEGFAULT in rare conditions
  under Cygwin (Windows)
- fixed bug met when removing tape marks (-at option) and due to poor
  compression, dar skips back to re-save file uncompressed leading to
  self reported bug (due to an error in the sanity check).
- fixing error message display by dar when -y option is used with another
  command (-c/-t/-l/-d/-x/-+/-C)

from 2.6.14 to 2.6.15
- fixed error message formatting error leading message to contain garbage
  in place of system error information.
- fixing bug (internal error) met while trying restoring files and dirs
  without sufficient write permission on the destination directory tree
  to perform the operation.
- adding minor feature to avoid restoring Unix sockets (-au option)
- fixing dar-catalogue.dtd

from 2.6.13 to 2.6.14
- script used to build dar windows binary has been fixed to have the
  official default etc/darrc config file usable and used out of the
  box.
- fixed bug met when removing slices of an old backup located on
  a remote sftp server
- fixed bug in cache layer met when writing sliced backup to a remote
  ftp or sftp repository
- enhancement to the -[ and -] options to work as expected when "DOS"
  formatted text file is provided as a file listing.

from 2.6.12 to 2.6.13
- fixed compilation warning in testing routine (outside libdar and dar)
- due to change in autoconf, the --sysconfdir path (which defaults to
  ${prefix}/etc) was read as an empty string, leading dar to look for
  darrc system file at the root of the filesystem (/darrc)
- fixed bug that should occur in extremely rare conditions (it has been
  discover during 2.7.0 validation process): compression must be used,
  no ciphering, no hashing, file changed at backup time or had a poor
  compression ratio, was not saved at slice boundary, the previous
  entry had an EA saved but no FSA or an unchanged FSA. In such
  conditions are all met, dar tries to resave the file in place, but
  partially or totally overwites the EAs of the previous entry leading
  to archive testing to fail for these EA (though the archive could be
  finished without error).
- fixed bug met when case insensitive mask is requested (-an option)
  and locale of file to restore or backup is not the one the dar binary
  is run with.

from 2.6.11 to 2.6.12
- fixed regression met in 2.6.11 when generating encrypted archives

from 2.6.10 to 2.6.11
- fixing bug in dar_manager libdar part, met when the two oldest entries
  for a file are recorded as unchanged (differential backup).
- fixed typo in dar_manager man page
- updated lax mode to ignore encryption flag found in header and trailer
- fixed two opposite bugs in strong encryption code that annihilated
  each other, by chance
- fixing bug met when merging an archive an re-compressing the data
  with another algorithm that gives a less good result, this condition
  lead the merging operation to fail reporting a CRC mismatch
- improving archive header code to cope with unknown flags

from 2.6.9 to 2.6.10
- update the configure script to handle some undocumented --enable-*
  options that existed but were not expected to be used.
- fixed spelling in darrc comments
- fixed bug in dar_split that could occur in very rare conditions
- fixed EA support build failure due to what seems to be a change
  in Linux kernel header
- fixed symbol conflict with s_host of in.h on omniOS platform

from 2.6.8 to 2.6.9
- fixed some obvious bug when running doxygen (inlined documentation)
- fixing configure.ac to detect xattr.h system header when it is
  located in /usr/include/sys like under Alpine Linux distro (musl libc)
- fixed typo in symbol name "libdar.archive_summary" in python binding
- fixed bug met when testing an archive in sequential-read mode leading
  dar to skip back to test deleted inode which is useless and may lead
  to failure if the archive is read from a pipe
- adding *.zst files as excluded from compression when using the
  predefined target "compress-exclusion"
- fixed text diagram alignment in documentation and spelling errors
- moving date_past_N_days script to doc/sample with other scripts

from 2.6.7 to 2.6.8
- fixing bug leading binary delta failed to be read from an archive in
  some quite rare condition.
- fixed bug that was not listing file with delta path when filtering out
  unsaved inodes
- updated source package for the python binding tutorial document be
  installed with the rest of the documentation
- adding date_past_N_days helper script to backup only files later than
  "today minus N days"
- incorporated the "args" support built script in dar source package

from 2.6.6 to 2.6.7
- fixing shell_interaction_emulator class declaration to avoid compilation
  errors and warning under MacOS
- fixed bug: dar failed creating an archive on its standard output
  reporting the error message "Skipping backward is not possible on a pipe"
- new feature: added python binding to libdar!

from 2.6.5 to 2.6.6
- fixing script that builds windows binary packages to include missing
  cygwin libraries
- fixing bug: dar_manager batch command (-@ option) contains a inverted
  test in a sanity check, leading the execution to systematically abort
  reporting an internal error message.
- fixed message error type when asymmetrical encryption is requested and
  gpgme has not been activated at compilation time
- fixed dar/libdar behavior when gpg binary is not available and gpgme
  has been activated at compilation time. Instead of aborting, dar now
  signal the gpgme error and proposes to retry initialization without
  gpgme support. This makes sense for dar_static binary which stays
  usable in that context when all options have been activated

from 2.6.4 to 2.6.5
- fixed bug: dar crashed when the HOME environment variable was not
  defined (for example running dar from crontab)
- removed useless skip() in cache layer
- cache layer improvement, flushing write pending data before asking
  lower layer about skippability
- fixed bug met when several consecutive compressed files were asked to
  be compressed and failed getting reduced in size by libdar. In that
  situation as expected, libdar tries to skip backward and stores the
  file uncompressed. However the cache layer was introducing an offset
  of a few bytes leading the next file to be written over the end of the
  previous one, which dar reported as data corruption when testing the
  archive.
- updating licensing information with the new address of the FSF
- clarifying message about possibly truncated filename returned by the
  operating system

from 2.6.3 to 2.6.4
- fixed display bug indicating delta signatures were about to be
  calculated even when this was not the case.
- updating dar man page about the fact aes256 replaced blowfish as
  the default strong encryption algorithm
- bug fix: -D option used at creation time was not adding escape mark
  of skipped directories. This lead the empty directories that would
  replace each skipped one to be inaccessible and unable to be restored
  only in sequential read mode (it worked as expected in direct mode)

from 2.6.2 to 2.6.3
- feature enhancement: added option to specify the block size used to
  create delta signatures.
- feature enhancement: added the ability to provide login for sftp/ftp
  remote access, that contain @ and other special characters.
- fixed bug in dar_xform, leading dar not finding source archive if
  destination was not placed in the same directory as source

from 2.6.1 to 2.6.2
- fixed incoherence in documentation
- updating in-lined help information (-h option)
- fixed unexpected behavior of the dar command-line filtering mechanism
  met when the provided path to -P or -g options was ending with a slash
- renaming 'path operator + (std::string)' as method append() to avoid
  compiler using it when a std::string need first to be converted to path
  before adding it to an existing path.
- adding check test to detect when path::append() is used to add a path
  instead of a filename to an existing path object.
- adding a warning when restoring a Unix socket if the path to that
  socket is larger than what the sockaddr_un system structure can handle
- fixing bug due to Linux system removing file capabilities (stored as
  EA) when file ownership is changed. Though restoring EA after ownership
  may lead to the impossibility to restore them due to lack of permission
  when dar/libdar is not run as root. Thus we try restoring EA a second
  time after ownership restoration. This is not efficient but restores
  the file as close as possible to their original state whatever
  permission dar has been granted for a restoration operation.

from 2.6.0 to 2.6.1
- fixed error in man page
- fixing bug in the routine removing files for local filesystem, used at
  archive creation time to remove an existing archive (after user
  confirmation), or at restoration time used to remove file that had been
  removed since the archive of reference was done. The file to remove was
  always removed from the current directory (missing the path part), most
  of the time this was leading to the error message "Error removing file
  ...: Not such file or directory". It could also lead to incorrectly
  removing files (not directory) located in the directory from which
  dar was run.
- fixing bug met while repairing an archive containing delta signature
  for unsaved files
- merging patch from ballsystemlord updating list of file extension
  not to compress (see compress-exclusion defined in /etc/darrc)
- review cat_delta_signature implementation in order to be able to fix
  memory consumption problem when delta signature are used
- fixed missing mark for data CRC when the data is a delta patch, leading
  sequential reading to fail when a delta patch was encountered
- fixed bug in XML output about deleted entries
- fixed XML output to be identical to the one of dar 2.5.x for deleted
  entries.
- Adding the deleted date in 'mtime' field for deleted entries in XML
  output
- fixing bug in xz/lzma routine wrongly reporting internal error when
  corrupted data was met
- fixed code for compilation with clang to succeed (it concerns MAC OS X
  in particular)
- fixed inconsistencies in libdar API that avoided gdar to compile with
  libdar released in 2.6.0

from 2.5.x to 2.6.0
- new feature: support for binary delta in incremental/differential backups
  (relying on librsync)
- new feature: support ftp/sftp to read an archive from a cloud storage.
  (relying on libcurl)
  reading is optimized to not transfer a whole slice but only the needed
  part to proceed to the operation (restoration, listing, and so on)
- new feature: support ftp/sftp to write an archive eventually with hash
  files to a remote cloud storage (relying on libcurl)
- modified behavior: While creating a single sliced archive, DUC file is
  now executed unless user interrupted dar/libdar. This to stay coherent
  with multi sliced archive behavior
- new feature: display filters nature (-vmasks option)
- new feature: follow some symlinks as defined by the --ignored-as-symlink
  option
- new feature: one can define the compression algorithm a dar_manager
  database will use. This choice is only available at database creation
  using the new dar_manager's -z option. In particular "-z none" can be
  used to avoid using compression at all
- repair mode added to re-create a completed archive (suitable for direct
  access mode and merging) from an interrupted one due to lack of disk
  space, power outage or other reasons leading to similar problem.
- Dar can now only save metadata inode change without re-saving the whole
  file if its data has not changed. Dar_manager also handle this by
  restoring the full backup and then the inode metadata only when
  necessary.
- In regard to previous point, if you want to keep having dar saving the
  data when only metadata has changed use --modified-data-detection option
- moved dar_slave code into libdar as class libdar::libdar_slave
- moved dar_xform code into libdar as class libdar::libdar_xform
- added libdar_slave and libdar_xform in libdar API
- modified dar_xform and dar_slave to rely on new libdar API
- API: simplified user_interface class
- API: using std::shared_ptr and std::unique_ptr to explicitly show the
  ownership of the given pointed objects (C++11 standard)
- API: simplified class archive to only require user_interaction at
  object construction time
- API: simplified class database to only require user_interaction at
  object construction time
- API: making enum crypto_algo an C++11 "enum class" type
- security refresh: default crypto algo is now AES256. As you do not
  need anymore since 2.5.0 to specify the -K option when reading an
  archive this should not bring any backward compatibility issue
- security refresh: adding salt per archive (one is still present per
  block inside an archive)
- security refresh/new feature: adding option --kdf-param to define
  the iteration count for key derivation, which now defaults to 200,000
  and hash algorithm used to derived key, still using sha1 by default
- slide effect of previous feature due to starvation of free letters
  to add a new command, the -T option with argument is no more
  available, one need to provide explicitly the desired argument
- security refresh: improving seed randomization for the pseudo-random
  generator used in elastic buffers
- feature enhancement: activate needed Linux capabilities in the
  "effective" set if it is permitted but not effective. This concerns
  cap_chown at restoration time, cap_fchown for furtive read mode,
  cap_linux_immutable to restore the immutable flag, and cap_sys_
  resource to set some linux FSA. This let one set the capabilities
  for dar binary only in the "permitted" set, capabilities will then be
  allowed only for users having them in the "inheritable" set of their
  calling process (usually a shell), without root privilege need.
- the ./configure --enable-mode option now defaults to 64, which
  will setup a libdar64 in place of infinint based libdar by default.
  You can still build a infinint based libdar by passing
  --enable-mode=infinint to the ./configure script.

from 2.5.21 to 2.5.22
- removed useless skip() in cache layer
- cache layer improvement, flushing write pending data before asking
  lower layer about skippability
- fixed bug met when several consecutive compressed files were asked to
  be compressed and failed getting reduced in size by libdar. In that
  situation as expected, libdar tries to skip backward and stores the
  file uncompressed. However the cache layer was introducing an offset
  of a few bytes leading the next file to be written over the end of the
  previous one, which dar reported as data corruption when testing the
  archive.
- updating licensing information with the new address of the FSF
- fixing bug met when restoring file having FSA but EA and overwriting
  an existing file in filesystem
- clarifying message about possibly truncated filename returned by the
  operating system

from 2.5.20 to 2.5.21
- bug fix: -D option used at creation time was not adding escape mark
  of skipped directories. This lead the empty directories that would
  replace each skipped one to be inaccessible and unable to be restored
  only in sequential read mode (it worked as expected in direct mode)

from 2.5.19 to 2.5.20
- adding a warning when restoring a unix socket if the path to that
  socket is larger than what the sockaddr_un system structure can handle
- fixing bug due to Linux system removing file capabilities (stored as
  EA) when file ownership is changed. Though restoring EA after ownership
  may lead to the impossibility to restore them due to lack of permission
  when dar/libdar is not run as root. Thus we try restoring EA a second
  time after ownership restoration. This is not efficient but restores
  the file as close as possible to their original state whatever
  permission dar has been granted for a restoration operation.
- fixing compilation problem with recent clang++ compiler

from 2.5.18 to 2.5.19
- fixed compilation issue on system that to not have ENOATTR defined
- fixed compilation warning about deprecated dynamic exception
  specifications in C++11
- fixing bug in xz/lzma routine wrongly reporting internal error when
  corrupted data was met
- fixed compilation warning with gcc about deprecated readdir_r system
  call

from 2.5.17 to 2.5.18
- fixed compilation issue in context where EA are not supported
- fixed typo in dar man page (--sequential-mode in place of
  --sequential-read)
- moved the "no EA support warning" trigger when restoring an archive
  later in the EA restoration process, in order to have the possibility
  thanks to the -u "*" option to restore an archive containing EA using a
  dar/libdar without EA support activated at compilation time,
- at restoration time, avoiding issuing an "EA are about to be
  overwritten" warning when the in place file has in fact not only
  one EA set.

from 2.5.16 to 2.5.17
- bug fix: dar failed to restore EA when file permission to restore
  did not included user write access. Fix consists in temporarily
  adding user write access in order to restore EA and removing this
  extra permission afterward if necessary
- updated FAQ
- fixed typos in dar man page
- fixed bug met when writing slices to a read-only filesystem
- fixed compilation problem under Solaris
- fixed typos in dar man page
- bug fix: self reporting bug in filtre.cpp line 2932 or 2925 depending
  or dar's version (report occurs in a normal but rare condition that
  was not imagined by developer, leading dar to abort the backup)
- bug fix: wrong evaluation of possibility to seek backward in the
  escape layer (layer managing tape marks) which lead to useless but
  harlmess skip trials in some rare conditions.

from 2.5.15 to 2.5.16
- bug fix: while rechecking sparse file (-ah option) during a merging
  operation, dar wrongly reported CRC mismatch for saved plain files
- fixed man page about sparse-file handling while merging: To remove
  sparse file datastructure during a merging operation you need to
  set --sparse-file-min-size to a valuer larger than all file sizes
  contained in the archive (for example 1E for one exabyte)
- bug fix: met when using compression and creating the archive to
  dar's standard output (ssh) and leading files to be corrupted in the
  archive and reported as such.
- optimisation of escape_sequence skippability (avoids trying skipping
  and failing for some corner cases, when we can detect it does even
  not worth trying)

from 2.5.14-bis to 2.5.15
- fixing self report bug message met when trying to create an isolated
  catalogue into a directory that does not exist
- adding slice overwriting verification before creating a isolated
  catalogue, to be coherent with other operations creating an archive
  (backup and merging)
- storage size of compressed files was often wrongly stored in archive
  (shorter than reality), the only impact took place at archive listing
  time where the compression ratio displayed was better than reality
- fixed auto-detected bug condition triggered when -Tslicing is used
  with --sequential-read. Both options are not compatible and have been
  excluded by a nicer message than this auto-detection bug message.

from 2.5.14 to 2.5.14-bis
- avoiding using the syncfs() system call in dar_split when the
  platform does not support it (replacing it by sync() in that case
  for compilation to be successful)

from 2.5.13 to 2.5.14
- made libgcrypt built-in memory guard be initialized before obtaining
  ligcrypt version, to respect libgcrypt usage (but no problem was seen
  nor reported about this inconsistency)
- fixed syntax error in XML listing output (EA_entry and Attributes
  tags)
- fixed typos in dar man page
- Updating Tutorial for restoration
- fixed bugs in dar_split: cygwin support, filedescriptors were not
  explicitly closed at end of execution, allocating buffer on heap
  rather than in the stack for better size flexibility, avoiding buffer
  size to be greater than SSIZE_MAX.
- added -s option to dar_split in order to disable the by default SYNC
  write that was used and which caused poor performance. To keep the
  same behavior as the older dar_split (and its poor performances) you
  need now using -s option.
- dar_split enhancement: added call to syncfs before closing the file
  descriptor in split_output mode
- fixed bug in dar_split that was did not lead dar_split to completely
  fulfill an device before asking for user to change the media when
  used in split_output mode, this was sometimes leading dar reporting
  file as corrupted at dar_split at media boundary.
- added feature in dar_split to show the amount of data written since
  the last media change

from 2.5.12 to 2.5.13
- added -az option to automatically nullify negative dates returned from
  the system in the archive under creation (filesystem is not modified)
- included the birthtime (HFS FSA) into the negative dates handling
- modified behavior: dar now fails upon unknown option instead of warning
  the option is unknown and thus ignored
- bug fix: dar 2.5.12 and below in 2.5.x branch could not read archive
  generated by dar 2.4.x and below (unless in infinint compilation mode)
  when the old archive included a file which date(s) was returned by the
  system as a negative integer at the time of the backup. Note that if
  dar can now read old archive in that particular case, such date stay
  recorded in the dar archive as very far in the future and not in the
  past, because 2.4.x and below blindly assumed the system would always
  return a positive integer as number of second since 1970. Since 2.5.12
  release, when the system provides a negative date the date is assumed
  as zero (Jan 1970) with user agreement.
- fixed missing throw in tools.cpp (exception condition was not reported)

from 2.5.11 to 2.5.12
- documenting in man page the limitation of -[ and -] options concerning
  the maximum line length that could be used in a listing file. This
  limitation was only described in doc/Limitations.html
- dar now aborts if a line exceeding 20479 bytes is met in a listing file
- improved error message issued when a file listing (-[ or -] option) is
  missing for it provides the missing filename in the error message
- improved error message issued when a line of a file listing exceeds
  20479 characters for it display the start of that line
- fixed bug in file listing (-[ option) leading some directories and their
  content to be excluded in a somehow rare condition
- improved behavior when dar reads a negative date. Instead of aborting
  it now asks the user if it can substitute such value by zero
- improved behavior when dar is asked to read an archive located in a
  directory that does not exist. DUC file passed to -E option is now
  properly run in that case too and has the possibility for example to
  create that directory and download requested file

from 2.5.10 to 2.5.11
- minor feature: displays the archive header which is never ciphered and
  aborts. This feature is activated while listing archive content and
  adding the -aheader option. This brings the side effect to invert two
  lines in the archive summary (dar -l archive -q) "catalogue size" and
  "user comment".
- adding date format info for -w option in "dar_manager -h" usage help
- fixed several mistakes in tools.cpp leading compilation to fail under
  certain environments
- fixed a typo in filesystem.cpp and portability issue that lead
  compilation to fail under openbsd 6.0
- fixed bug in the filtering mechanism relying on file listing (-[ and
  -] options) that could not find an entry in the listing upon certain
  condition leading a file not being excluded as requested or not
  included as requested

from 2.5.9 to 2.5.10
- fixed bug: -r option (only more recent overwriting policy) was
  considering a file to be more recent when it had the exact same date as
  the file in place.
- updating documentation about requirements for compiling dar from sources
- fixed bug: bug met when restoring of a file that has the immutable
  flag set. Dar/libdar failed restoring such file in the context of
  differential/incremental backup. The fix consists of the removal of the
  immutable flag from filesystem before restoring the new version of the
  file's data, then setting back the immutable flag afterward.
- updating FAQ with description of the way dar uses lzo compression
  compared to the lzop program
- fixed bug: aborting an archive was leading to an unreadable archive in
  direct mode, most of the time when strong encryption was used
- minor new feature: added two flavors of lzo algorithm: lzop-1 and lzop-3
  in order to match compression levels 1 and 3 of the lzop command

from 2.5.8 to 2.5.9
- fixed typos in documentation about dar internal use of symmetric
  encryption
- fixed bug: merging operation could wrongly melt different unrelated hard
  linked inodes when merging using an archive which results from a previous
  merging operation.
- fixed bug: aborting an archive was sometimes leading to an unreadable
  archive in direct mode (was readable only in --sequential-read mode)
- fixed bug: libgpgme was only present at linking time of final binaries
  (dar, dar_slave, dar_xform, dar_manager, dar_cp, dar_split), not at
  linking time of libdar, which caused problem under Linux Rosa distro
  where the "no-undefined" flag is passed to the linker.
- minor new feature: -ay option has been added to display sizes in bytes
  instead of the default which uses the largest possible unit (Kio, Mio,
  and so on.)

from 2.5.7 to 2.5.8
- fixed double memory release occurring in a particular case of read error
- improving robustness of FSA code against data corruption
- fixed bug: DAR_DUC_PATH was not used with -F and -~ options
- new feature: added -aduc option to combine several -E options using the
  shell '&&' operator rather than the shell ';' operator. The consequence
  is that with -aduc option a non zero exist status of any script (and not
  only of the script given to the last -E option) will lead dar to report
  the error.
- man page updated about combination of several -E options
- fixed bug: merging partial FSA led to self reported bug in cat_inode.cpp
  at line 615

from 2.5.6 to 2.5.7
- fixed bug leading dar to not include directories given to -g option nor
  to exclude directories given to -P option when at the same time the
  directory given to -R option starts by a dot ("-R ./here" in place of
  "-R here")
- bug fix and speed improvement: under certain circumstances dar was
  reading several times the data at slice boundary, leading dar to ask for
  slice N then N-1 then again N, this caused sub-optimal performance and
  was triggering user script unnecessarily

from 2.5.5 to 2.5.6
- added speed optimization when comparing dates with hourshift flexibility
  (-H option)
- fixed bug met when using as reference an archive generated by dar 2.5.4
  or older, bug that lead dar saving almost all file even those that did
  not change.

from 2.5.4 to 2.5.5
- fixed message displayed when reading old archives
- fixed bug that avoided dar-2.5.x code to read old archive format when
  special allocation was set (by defaut) at compilation time
- disabling special-alloc by default reducing memory footprint
- fixed error in FAQ about the way ctime/atime/mtime are modified during
  normal operating system life.
- new implementation of class datetime with better memory footprint
- avoding storing sub-microsecond part of date to preserve limitint
  ability to store large dates
- moving field cat_inode::last_cha from pointer-to-field to plain field
  of the class, this slightly reduce catalogue memory footprint.
- fixing bug in the returned exit status when dar failed executing DUC
  command due to system error (now returning the expected code 6 in that
  case too)

from 2.5.3 to 2.5.4
- fixing missing included files for libdar API
- removed extra try/catch block introduced by commit
  72da5cad5e52f959414b3163a2e2a320c2bc721e
- removed sanity check that caused problem when writing an archive to a
  FUSE based filesystem.
- fixing non call of the -E script/command after last slice creation,
  when encryption or slice hashing was used
- fixed bug in dar_manager: archive permutation in database lead libdar
  to check an archive number of range under certain circumstances
- fixed inversion of the condition triggering a warning about archive
  date order in a dar_manager database while moving an archive within a
  database
- fixed typos in documentation
- catalogue memory optimization, with the drawback to limit the number of
  entry in an archive to the max integer supported by the libdar flavor
  (32 bits/64 bits/infinint).
- fix configure script to temporarily rely on LIBS rather LDFLAGS to
  check for gpgme availability
- removed order dependency between -A and -9 options of dar_manager: -9
  can now be specified before or after -A option.
- resetting to "false" the "inode_wrote" flag of hard link \ 
data-structure
  before testing and merging. Merging a previously tested archive or
  testing a second time would not include hard linked inode in the
  operation. This situation does not occurs with dar but could succeed
  with some external tools that keep the catalogue in memory to perform
  different operations on it.
- fixed bug in the routine that detects existing slices to warn the user
  and/or avoid overwriting, bug that lead dar to "bark" when an archive
  base name started by a + character.
- avoiding to use AM_PATH_GPGME in configure script when gpgme.m4 is not
  available
- adding new methods in libdar API to obtain the archive offset and
  storage size of saved files (class list_entry)
- adding new method in libdar API to translate archive offset to file
  offset (class archive)
- reporting a specific error message when filename returned by the system
  has the maximum length supported by the system itself, assuming
  filename has been truncated

from 2.5.2 to 2.5.3
- Fixing a 2.5.x build issue met when a 2.4.x libdar library is already
  installed in an FreeBSD system.
- Improving message and behavior of libdar in lax mod when a truncated
  archive is read
- Fixing self reported bug at "tronconneuse.cpp line 561" met while
  reading truncated/corrupted archive
- Fixed not closed filedescriptors, met when saving a filesystem that has
  not ExtX FSA available
- Fixing configure script to be more robust in front of system where
  gpgme.h is installed in a non standard path and user did not provide
  coherent CPPFLAGS, LDFLAGS before calling ./configure
- Displaying CRC values when listing isolated catalog as XML output
- Fixing compilation issue when system does not provide strerror_r() call
- Avoiding warning about FSA absence when fsa-scope is set to "none"
- Adding --disable-fadvise option to configure script for those that want
  back full pressure from dar on the system cache (same behavior as 2.4.x)
- Fixing bug, fadvise() called a wrong time making it having no effect
- updating FAQ about comparative performance from 2.4.x to 2.5.x
- optimization: reduced the number of call to dup() at libdar startup
- improvement: printing file type on verbose output
- new feature: added %t macro reflecting the inode type in dar's
  --backup-hook-execute option

from 2.5.1 to 2.5.2
- fixed bug met when permission is denied while reading or writing slices
- fixing bug that avoided creating an archive at the root of the filesystem
- fixing bug met in rare situation while reading in sequential-read mode
  an archive encrypted using gnupg encryption. In that situation libdar
  may fail reading the archive (but succeeds in normal read mode) issuing
  an obscure message (message has also been fixed).
- code simplification, removing field reading_verion from class crypto_sym
  as its parent class tronconneuse already have such information
- removed extra newline displayed by dar at end of execution
- fixed bug avoiding dar to properly read an entry (reporting CRC error)
  when specific sequence of character (start of escape sequence) fall at
  end of the read buffer of the escape layer.
- speed optimization for datetime class
- fixed bug that avoided dar reading archives in sequential read mode
  while reading from a pipe
- fixed bug in non regression test routine provided beside dar/libdar
- fixing display message showing not always in the correct context
- fixing case inversion leading the cache layer not to be used when
  necessary and used when useless while reading an archive
- improved heuristic in dar_manager to determine the date a file has been
  deleted.

from 2.5.0 to 2.5.1
- fixed display bug in dar_manager met when using -o option and adding
  options for dar that does not exist for dar_manager (like -R option)
- reactivating disabled (by mistake) optimization for some read-only dar
  manager database operations
- fixing compilation issue with dar against gcc 4.9.2
- fixing syntax error in dar_manager message
- fixed bug that forbade dar_manager to write down modified database
  when only database header was modified (-o, -b, -p switches).
- adding dar_manager database format version information with -l option
- fixed libdar inability to read dar_manager's database format version 4
- adapting code to build under cygwin environment, where thread_local seems
  broken
- fixed output to stderr in place of stdout for Licensing information
- fixed bug met when permission is denied while reading or writing slices
- fixing bug that avoided creating an archive at the root of the filesystem

from 2.4.x to 2.5.0
- added support for posix_fadvise()
- added entrepot class hierarchy to support in the future other storage
  types than local filesystem for slices
- API: added access to the entrepot through the API
- modified class hash_fichier for it becomes entrepot independent
- API: extended libdar API with an additional and more simple way to read
  an archive: archive::get_children_in_table() method, see
  doc/API_tutorial.html for details
- added support for extX (see lsattr(1)) and HFS+ (birthtime date)
  Filesystem Specific Attributes (FSA).
- dar is now able to skip backward when a file is found to be "dirty" at
  backup time. This avoids wasting space in archive but is only possible if
  the backward position is located in the current slice and no slice
  hashing nor strong encryption is used. Of course if the archive is
  written to a pipe or to stdout, skipping back to retry saving data at the
  same place is neither possible, --retry-on-change option stays possible
  in that cases at the cost of data duplication (wasted bytes amount, see
  --retry-on-change man page).
- by default dar now performs up to 3 retries but do not allow for wasting
  bytes if file has changed at the time it was read for backup,
  this can be modied using --retry-on-change option.
- With the same constraints as for a changing file, if a file is saved
  compressed but its compressed data uses more space than uncompressed,
  the file's data is resaved as uncompressed. However, if skipping backward
  is not possible, data is kept compressed.
- if system provides it, dar uses "Linux capabilities" to check for the
  ability to set file ownership when dar is not run as root. This allows dar
  to restore ownership when allowed even when it is not run as superuser.
- removing dar-help tool used to build dar -h messages. That tool became
  useless for a long time now.
- added several more specific verbosity options: -vm, -vf and -vt
- added support for microsecond timestamps (atime, mtime, ctime, birthtime)
- Using lutime() to restore atime/mtimes of symlink on systems that support
  it.
- API: removed backward compatible API for old libdar 4.4.x
- API: simplified implementation of archive isolation thanks to isolation
  evolution features brought by release 2.4.0. Memory requirement is now
  devided by two compared to releases of previous branch (2.4.x).
- dar has been updated to use this new API for archive isolation
- added exclude-by-ea feature to avoid saving inodes that have a particular
  user defined EA set.
- added comparison of an isolated catalogue with a filesystem, relying on
  embedded data CRC and inode metadata in absence of the saved data.
- The new archive format (version 9) holds the ciphering algorithm used
  at creation time, only the passphrase is now required at reading time and
  -K option may be ignored which will lead dar to prompt for passphrase.
- Adding support for public key encryption (GnuPG) supporting several
  encryption keys/recipients for a given archive
- Adding support for public key signature when public key encryption is used
- While listing archive contents, directories now show the size and average
  compression ratio of the data they contain
- Archive summary (-l with -q options) now reports the global compression
  ratio
- added the -vd switch to only display current directory under process for
  creation, diff, test, extraction and merging operations
- added xz/lzma compression support
- added -Tslicing listing option to show slice location of files inside
  an archive archive.
- isolated catalogues now keep a record of the slicing layout of their
  archive of reference in order to provide -Tslicing feature when used
  on the isolated catalogue alone.
- However if an archive has been resliced (using dar_xform) after its
  isolated catalogue has been generated, using -Tslicing option with the
  isolated catalogue would give wrong information. To overcome that, it
  is possible to specify what is the new slicing of the archive of
  reference by using the -s and -S options in conjunction with -Tslicing
- added dar_split command to provide on-fly multi-volume archive support
  for tape media
- experimental feature to have libdar using several threads (not activated
  by default due to poor performance gain)
- dar now aborts when a given  user target cannot be found in included file
- added sha512 hashing algorithm beside already available md5 and sha1, the
  generated hash file can be used with 'sha512sum -c <file>' command
- removed useless --jog option for memory management
- removed previously deprecated -y/--bzip2 command, bzip2 compression
  remains available using -z option (-zbzip2 or --compression=bzip2)
- replaced SHA1 by SHA224 to generate IV for encryption blocks, this
  slightly improves randomness of IV and stay available when libgcrypt is
  run in FIPS mode

from 2.4.23 to 2.4.24
- fixed bug: merging operation could wrongly melt different unrelated hard
  linked inodes when merging using an archive which results from a previous
  merging operation.

from 2.4.22 to 2.4.23
- fixed bug leading dar to not include directories given to -g option nor
  to exclude directories given to -P option when at the same time the
  directory given to -R option starts by a dot ("-R ./here" in place of
  "-R here")

from 2.4.21 to 2.4.22
- fixing bug in the returned exit status when dar failed executing DUC
  command due to system error (now returning the expected code 6 in that
  case too)

from 2.4.20 to 2.4.21
- removed sanity check that caused problem when writing an archive to a
  FUSE based filesystem.
- fixed bug in dar_manager: archive permutation in database lead libdar
  to check an archive number out of range under certain circumstances
- fixed inversion of the condition triggering a warning about archive
  date order in a dar_manager database while moving an archive within a
  database
- removed order dependency between -A and -9 options of dar_manager: -9
  can now be specified before or after -A option.
- resetting to "false" the "inode_wrote" flag of hard link \ 
datastructure
  before testing and merging. Merging a previously tested archive or
  testing a second time would not include hard linked inode in the
  operation. This situation does not occurs with dar but could succeed
  with some external tools that keep the catalogue in memory to perform
  different operations on it.
- fixed bug in the routine that detects existing slices to warn the user
  and/or avoid overwriting, bug that lead dar to "bark" when an archive
  base name started by a + character.

from 2.4.19 to 2.4.20
- fixed display bug in dar_manager met when using -o option and adding
  options for dar that does not exist for dar_manager (like -R option)
- reactivating disabled (by mistake) optimization for some read-only dar
  manager database operations
- fixing compilation issue with dar against gcc 4.9.2
- fixing syntax error in dar_manager message
- fixing bug that avoided creating an archive at the root of the filesystem

from 2.4.18 to 2.4.19
- fixed missing quote in dar_par.dcf which is called by the par2 directive
- fixed bug in dar_manager's -u option, not displaying most recent files of
  an archive when they have been marked as removed in a more recent archive
  of the same dar_manager database.
- fixed bug met while restoring in sequential read mode a file having
  several copies (was modified at the time it was saved and retry-on-change
  was set).

from 2.4.17 to 2.4.18
- Initial Vector used for strong encryption was set with pseudo-random data
  generated using SHA1 message digest and blowfish cipher, which are not
  available when ligcrypt is running in FIPS mode. Since 2.4.18 we now use
  SHA256 and AES256 for IV assignment in order to have libdar compatible
  with FIPS mode. For data encryption nothing changes: the cipher specified
  (-K, -J, -$ options on CLI) are used as before.
- fixing bug met when performing archive isolation in sequential-read mode,
  If an archive corruption or truncated archive leads an inode to not have
  its CRC readable, dar aborts and issues a BUG report.
- updating list of project relying on dar/libdar

from 2.4.16 to 2.4.17
- fixing issue when case insensitive comparison was requested and invalid
  wide char for the current local was met in a filename. In such situation
  the corresponding file was never saved before (considering a filesystem
  error for that file), while now the ASCII case insensitivity is used
  as fallback.

from 2.4.15 to 2.4.16
- fixing archive listing displayed information for catalogue size when
  archive is read in --sequential-read mode
- fixing bug that avoided dar releases 2.4.x up to 2.4.15 to read encrypted
  archive generated by dar release 2.3.x and below
- adding informational note at the end of ./configure script execution
  when --enable-mode has not been used.
- adding support for case sensitivity in filename comparison (-an option)
  for other character sets than POSIX/C locale like Cyrillic for example.
- fixing bashisms in doc/samples scripts

from 2.4.14 to 2.4.15
- fixing bug met when reading an encrypted archive in sequential mode
- fixing bug met when reading an encrypted archive in sequential mode from
  an anonymous pipe
- changed option '-;' to -9 as '-;' does not work on all systems with getopt
  (only long option equivalent --min-digits worked) for dar, dar_cp,
  dar_manager, dar_xform and dar_slave commands.
- fixing bug met when restoring deleted files in sequential read mode and
  some directory where they should be "restored" are not readable or
  could not be restored earlier
- adding extra buffer to handle sequential read of encrypted archive
  when the last crypto block contains some but not all clear data after
  encrypted one (the archive trailer).
- fixing compilation issue using clang
- fixing bug that prevents using -~ option with on-fly catalogue isolation
  in order to execute an user command once on-fly isolation has completed
- added some autoconf magic to determine the correct (BSD/GNU) flag to
  use with sed in order to activate regular expression parsing
- new implementation of mask_list class which is compatible with libc++
- fixed bug met on FreeBSD with dar_xform where the system provides a
  standard input file descriptor in read-write instead of read-only mode.

from 2.4.13 to 2.4.14
- limiting memory consumption of the cache layer to stay below 10 MiB, under
  certain circumstances (very large archive), it could grow up to an insane
  value like 50% or the available RAM. reducing to 10 MiB does not impact
  performance in a noticeable manner while it avoids system to swap out due
  to the libdar cache layer becoming huge.
- added --with-pkgconfigdir to define an alternative path for libdar
  pkgconfig file (to ease portability to FreeBSD)
- modified some Makefile.am for better FreeBSD support
- fixed display bug in XML listing output concerning hard linked inodes
- fixing typo in man page
- fixing bug met while isolating a catalogue in --sequential-read mode.
  Using such isolated catalogue lead dar report an error about inaccessible
  EA.
- displaying compression rate for sparse files even when they are
  uncompressed, sparse file detection also leads to compress files
- fixing bug that lead libdar to fail comparing an inode having EA when
  comparison is done in --sequential-read mode
- fixing display bug in in ligcrypt check of configure script for minimum
  required version
- fixing 'make clean' to remove some forgotten files generated by 'make'

Log message:
*: recursive bump for perl 5.36

Log message:
archivers: Replace RMD160 checksums with BLAKE2s checksums

All checksums have been double-checked against existing RMD160 and SHA512
hashes.

Log message:
archivers: Remove SHA1 distfiles hashes