Log message:
nettle: updated to 3.7.1

NEWS for the Nettle 3.7.1 release

This is primarily a bug fix release, fixing a couple of
problems found in Nettle-3.7.

The new version is intended to be fully source and binary
compatible with Nettle-3.6. The shared library names are
libnettle.so.8.2 and libhogweed.so.6.2, with sonames
libnettle.so.8 and libhogweed.so.6.

Bug fixes:

* Fix bug in chacha counter update logic. The problem affected
  ppc64 and ppc64el, with the new altivec assembly code
  enabled. Reported by Andreas Metzler, after breakage in
  GnuTLS tests on ppc64.

* Support for big-endian ARM platforms has been restored.
  Fixes contributed by Michael Weiser.

* Fix build problem on OpenBSD/powerpc64, reported by Jasper
  Lievisse Adriaanse.

* Fix corner case bug in ECDSA verify, it would produce
  incorrect result in the unlikely case of an all-zero
  message hash. Reported by Guido Vranken.

New features:

* Support for pbkdf2_hmac_sha384 and pbkdf2_hmac_sha512,
  contributed by Nicolas Mora.

Miscellaneous:

* Poorly performing ARM Neon code for doing single-block
  Salsa20 and Chacha has been deleted. The code to do two or
  three blocks in parallel, introduced in Nettle-3.7, is
  unchanged.

NEWS for the Nettle 3.7 release

This release adds one new feature, the bcrypt password hashing
function, and lots of optimizations. There's also one
important change to how Nettle is configured: Fat builds are
now on by default.

The release adds PowerPC64 assembly for a few algorithms,
resulting in great speedups. Benchmarked on a Power9 machine,
speedup was 13 times for AES256-CTR and AES256-GCM, and 3.5
times for Chacha. For fat builds (now the default), the new
code is used automatically, on processors supporting the needed
instruction set extensions.

The new version is intended to be fully source and binary
compatible with Nettle-3.6. The shared library names are
libnettle.so.8.1 and libhogweed.so.6.1, with sonames
libnettle.so.8 and libhogweed.so.6.

New features:

* Support for bcrypt, contributed by Stephen R. van den Berg.

Optimizations:

* Much faster AES and GCM on PowerPC64 processors supporting
  the corresponding crypto extensions. Contributed by Mamone
  Tarsha.

* Speed of Chacha improved on PowerPC64, x86_64 and ARM Neon.

* Speed of Salsa20 improved on x86_64 and ARM Neon.

* Overhaul of some elliptic curve primitives, improving ECDSA
  signature speed.

Configure:

* Fat builds are enabled by default on the architectures where
  it is supported (x86_64, arm and powerpc64). To disable
  runtime selection, and instead specify the processor flavor
  at configure time, you need to pass --disable-fat to the
  configure script.

Known issues:

* The ARM assembly code in this release doesn't work correctly
  on big-endian ARM systems. This will hopefully be fixed in a
  later release.

Miscellaneous:

* Use a few more gmp-6.1 functions: mpn_cnd_add_n,
  mpn_cnd_sub_n, mpn_cnd_swap. Delete corresponding internal
  Nettle functions.

* Convert all assembly files to use the default m4 quote
  characters.

Log message:
nettle: updated to 3.6

Nettle 3.6:

This release adds a couple of new features, most notable being
support for ED448 signatures.

It is not binary compatible with earlier releases. The shared
library names are libnettle.so.8.0 and libhogweed.so.6.0, with
sonames nibnettle.so.8 and libhogweed.so.6. The changed
sonames are mainly to avoid upgrade problems with recent
GnuTLS versions, that depend on Nettle internals outside of
the advertised ABI. But also because of the removal of
internal poly1305 functions which were undocumented but
declared in an installed header file, see Interface changes
below.

New features:

* Support for Curve448 and ED448 signatures. Contributed by
  Daiki Ueno.

* Support for SHAKE256 (SHA3 variant with arbitrary output
  size). Contributed by Daiki Ueno.

* Support for SIV-CMAC (Synthetic Initialization Vector) mode,
  contributed by Nikos Mavrogiannopoulos.

* Support for CMAC64, contributed by Dmitry Baryshkov.

* Support for the "CryptoPro" variant of the GOST hash
  function, as gosthash94cp. Contributed by Dmitry Baryshkov.

* Support for GOST DSA signatures, including GOST curves
  gc256b and gc512a. Contributed by Dmitry Baryshkov.

* Support for Intel CET in x86 and x86_64 assembly files, if
  enabled via CFLAGS (gcc --fcf-protection=full). Contributed
  by H.J. Lu and Simo Sorce.

* A few new functions to improve support for the Chacha
  variant with 96-bit nonce and 32-bit block counter (the
  existing functions use nonce and counter of 64-bit each),
  and functions to set the counter. Contributed by Daiki Ueno.

* New interface, struct nettle_mac, for MAC (message
  authentication code) algorithms. This abstraction is only
  for MACs that don't require a per-message nonce. For HMAC,
  the key size is fixed, and equal the digest size of the
  underlying hash function.

Bug fixes:

* Fix bug in cfb8_decrypt. Previously, the IV was not updated
  correctly in the case of input data shorter than the block
  size. Reported by Stephan Mueller, fixed by Daiki Ueno.

* Fix configure check for __builtin_bswap64, the incorrect
  check would result in link errors on platforms missing this
  function. Patch contributed by George Koehler.

* All use of old-fashioned suffix rules in the Makefiles have
  been replaced with %-pattern rules. Nettle's use of suffix
  rules in earlier versions depended on undocumented GNU make
  behavior, which is being deprecated in GNU make 4.3.

  Building with other make programs than GNU make is untested
  and unsupported. (Building with BSD make or Solaris make
  used to work years ago, but has not been tested recently).

Interface changes:

* Declarations of internal poly1305.h functions have been
  removed from the header file poly1305.h, to make it clear
  that they are not part of the advertised API or ABI.

Miscellaneous:

* Building the public key support of nettle now requires GMP
  version 6.1.0 or later (unless --enable-mini-gmp is used).

* A fair amount of changes to ECC internals, with a few
  deleted and a few new fields in the internal struct
  ecc_curve. Files and functions have been renamed to more
  consistently match the curve name, e.g., ecc-256.c has been
  renamed to ecc-secp256r1.c.

* Documentation for chacha-poly1305 updated. It is no longer
  experimental. The implementation was updated to follow RFC
  8439 in Nettle-3.1, but that was not documented or announced
  at the time.

Log message:
all: migrate homepages from http to https

pkglint -r --network --only "migrate"

As a side-effect of migrating the homepages, pkglint also fixed a few
indentations in unrelated lines. These and the new homepages have been
checked manually.

Log message:
nettle: bump ABI depends because of shlib major bump

Log message:
nettle: update to 3.5.1.

NEWS for the Nettle 3.5.1 release

	The Nettle-3.5.1 corrects a packaging mistake in Nettle-3.5.
	The new directory x86_64/sha_ni were missing in the tar file,
	breaking x86_64 builds with --enable-fat, and producing worse
	performance than promised for builds with --enable-x86-sha-ni.
	Also a few unused in-progress assembly files were accidentally
	included in the tar file.

	These problems are corrected in Nettle-3.5.1. There are no
	other changes, and also the library version numbers are
	unchanged.

NEWS for the Nettle 3.5 release

	This release adds a couple of new features and optimizations,
	and deletes or deprecates a few obsolete features. It is *not*
	binary (ABI) compatible with earlier versions. Except for
	deprecations listed below, it is intended to be fully
	source-level (API) compatible with Nettle-3.4.1.

	The shared library names are libnettle.so.7.0 and
	libhogweed.so.5.0, with sonames libnettle.so.7 and
	libhogweed.so.5.

	Changes in behavior:

	* Nettle's gcm_crypt will now call the underlying block cipher
	  to process more than one block at a time. This is not a
	  change to the documented behavior, but unfortunately breaks
	  assumptions accidentally made in GnuTLS, up to and including
	  version 3.6.1.

	New features:

	* Support for CFB8 (Cipher Feedback Mode, processing a single
	  octet per block cipher operation), contributed by Dmitry
	  Eremin-Solenikov.

	* Support for CMAC (RFC 4493), contributed by Nikos
	  Mavrogiannopoulos.

	* Support for XTS mode, contributed by Simo Sorce.

	Optimizations:

	* Improved performance of the x86_64 AES implementation using
	  the aesni instructions. Gives a large speedup for operations
	  processing multiple blocks at a time (including CTR mode,
	  GCM mode, and CBC decrypt, but *not* CBC encrypt).

	* Improved performance for CTR mode, for the common case of
	  16-byte block size. Pass more data at a time to underlying
	  block cipher, and fill the counter blocks more efficiently.
	  Extension to also handle GCM mode efficiently contributed
	  by Nikos Mavrogiannopoulos.

	* New x86_64 implementation of sha1 and sha256, for processors
	  supporting the sha_ni instructions. Speedup of 3-5 times on
	  affected processors.

	* Improved parameters for the precomputation of tables used
	  for ecc signatures. Roughly 10%-15% speedup of the ecdsa
	  sign operation using the secp_256r1, secp_384r1 and
	  secp_521r1 curves, and 25% speedup of ed25519 sign
	  operation, benchmarked on x86_64. Table sizes unchanged,
	  around 16 KB per curve.

	* In ARM fat builds, automatically select Neon implementation
	  of Chacha, where possible. Contributed by Yuriy M.
	  Kaminskiy.

	Deleted features:

	* The header file des-compat.h and everything declared therein
	  has been deleted, as announced earlier. This file provided a
	  subset of the old libdes/ssleay/openssl interface for DES
	  and triple-DES. DES is still supported, via the functions
	  declared in des.h.

	* Functions using the old struct aes_ctx have been marked as
	  deprecated. Use the fixed key size interface instead, e.g.,
	  struct aes256_ctx, introduced in Nettle-3.0.

	* The header file nettle-stdint.h, and corresponding autoconf
	  tests, have been deleted. Nettle now requires that the
	  compiler/libc provides <stdint.h>.

	Miscellaneous:

	* Support for big-endian ARM systems, contributed by Michael
	  Weiser.

	* The programs aesdata, desdata, twofishdata, shadata and
	  gcmdata are no longer built by default. Makefile
	  improvements contributed by Jay Foad.

	* The "example" program examples/eratosthenes.c has been
	  deleted.

	* The contents of hash context structs, and the deprecated
	  aes_ctx struct, have been reorganized, to enable later
	  optimizations.

	The shared library names are libnettle.so.7.0 and
	libhogweed.so.5.0.

Log message:
nettle: use c99

Add c99 to USE_LANGUAGES as nettle 3.4.1 uses c99 for loop syntax, and
won't build on NetBSD 7.1 without it.

Log message:
nettle: Update security/nettle to 3.4.1

Changes:
3.4.1
-----
This release fixes a few bugs, and makes the RSA private key
operations side channel silent. The RSA improvements are
contributed by Simo Sorce and Red Hat, and include one new
public function, rsa_sec_decrypt, see below.

All functions using RSA private keys are now side-channel
silent, meaning that they try hard to avoid any branches or
memory accesses depending on secret data. This applies both to
the bignum calculations, which now use GMP's mpn_sec_* family
of functions, and the processing of PKCS#1 padding needed for
RSA decryption.

Nettle's ECC functions were already side-channel silent, while
the DSA functions still aren't. There's also one caveat
regarding the improved RSA functions: due to small table
lookups in relevant mpn_sec_* functions in GMP-6.1.2, the
lowest and highest few bits of the secret factors p and q may
still leak. I'm not aware of any attacks on RSA where knowing
a few bits of the factors makes a significant difference. This
leak will likely be plugged in later GMP versions.

Changes in behavior:

* The functions rsa_decrypt and rsa_decrypt_tr may now clobber
  all of the provided message buffer, independent of the
  actual message length. They are side-channel silent, in that
  branches and memory accesses don't depend on the validity or
  length of the message. Side-channel leakage from the
  caller's use of length and return value may still provide an
  oracle useable for a Bleichenbacher-style chosen ciphertext
  attack. Which is why the new function rsa_sec_decrypt is
  recommended.

New features:

* A new function rsa_sec_decrypt. It differs from
  rsa_decrypt_tr in that the length of the decrypted message
  is given a priori, and PKCS#1 padding indicating a different
  length is treated as an error. For applications that may be
  subject to chosen ciphertext attacks, it is recommended to
  initialize the message area with random data, call this
  function, and ignore the return value. This applies in
  particular to RSA-based key exchange in the TLS protocol.

Bug fixes:

* Fix bug in pkcs1-conv, missing break statements in the
  parsing of PEM input files.

* Fix link error on the pss-mgf1-test test, affecting builds
  without public key support.

Performance regression:

* All RSA private key operations employing RSA blinding, i.e.,
  rsa_decrypt_tr, rsa_*_sign_tr, the new rsa_sec_decrypt, and
  rsa_compute_root_tr, are significantly slower. This is
  because (i) RSA blinding now use side-channel silent
  operations, (ii) blinding includes a modular inversion, and
  (iii) side-channel silent modular inversion, implemented as
  mpn_sec_invert, is very expensive. A 60% slowdown for
  2048-bit RSA keys have been measured.

Miscellaneous:

* Building the public key support of nettle now requires GMP
  version 6.0 or later (unless --enable-mini-gmp is used).

The shared library names are libnettle.so.6.5 and
libhogweed.so.4.5, with sonames still libnettle.so.6 and
libhogweed.so.4. It is intended to be fully binary compatible
with nettle-3.1.

Log message:
Fix indentation in buildlink3.mk files.

The actual fix as been done by "pkglint -F */*/buildlink3.mk", and was
reviewed manually.

There are some .include lines that still are indented with zero spaces
although the surrounding .if is indented. This is existing practice.

Log message:
nettle: update to 3.4.

NEWS for the Nettle 3.4 release

	This release fixes bugs and adds a few new features. It also
	addresses an ABI compatibility issue affecting Nettle-3.1 and
	later, see below.

	Bug fixes:

	* Fixed an improper use of GMP mpn_mul, breaking curve2559 and
	  eddsa on certain platforms. Reported by Sergei Trofimovich.

	* Fixed memory leak when handling invalid signatures in
	  ecdsa_verify. Fix contributed by Nikos Mavrogiannopoulos.

	* Fix compilation error with --enable-fat om ARM. Fix
	  contributed by Andreas Schneider.

	* Reorganized the way certain data items are made available.

	  Short version: Nettle header files now define the symbols
	  nettle_hashes, nettle_ciphers, and nettle_aeads, as
	  preprocessor macros invoking a corresponding accessor
	  function. For backwards ABI compatibility, the symbols are
	  still present in the compiled libraries, and with the same
	  sizes as in nettle-3.3.

	New features:

	* Support for RSA-PSS signatures, contributed by Daiki Ueno.

	* Support for the HKDF key derivation function, defined by RFC
	  5869. Contributed by Nikos Mavrogiannopoulos.

	* Support for the Cipher Feedback Mode (CFB), contributed by
	  Dmitry Eremin-Solenikov.

	* New accessor functions: nettle_get_hashes,
	  nettle_get_ciphers, nettle_get_aeads, nettle_get_secp_192r1,
	  nettle_get_secp_224r1, nettle_get_secp_256r1,
	  nettle_get_secp_384r1, nettle_get_secp_521r1.

	  For source-level compatibility with future versions,
	  applications are encouraged to migrate to using these
	  functions instead of referring to the corresponding data
	  items directly.

	Miscellaneous:

	* The base16 and base64 functions now use the type char * for
	  ascii data, rather than uint8_t *. This eliminates the last
	  pointer-signedness warnings when building Nettle. This is a
	  minor API change, and applications may need to be adjusted,
	  but the ABI is unaffected on all platforms I'm aware of.

	* The contents of the header file nettle/version.h is now
	  architecture independent, except in --enable-mini-gmp
	  configurations.

	ABI issue:

	  Since the breakage was a bit subtle, let me document it
	  here. The nettle and hogweed libraries export a couple of
	  data symbols, and for some of these, the size was never
	  intended to be part of the ABI. E.g.,

	    extern const struct nettle_hash * const nettle_hashes[];

	  which is an NULL-terminated array.

	  It turns out the sizes nevertheless may leak into the ABI, and
	  that increasing the sizes can break old executables linked
	  with a newer version of the library.

	  When linking a classic non-PIE executable with a shared
	  library, we get ELF relocations of type R_X86_64_COPY for
	  references to data items. These mean that the linker allocates
	  space for the data item in the data segment of executable, at
	  a fixed address determined at link-time, and with size
	  extracted from the version of the .so-file seen when linking.

	  At load time, the run time linker then copies the contents of
	  the symbol from the .so file to that location, and uses the
	  copy instead of the version loaded with the .so-file. And if
	  the data item in the .so file used at load time is larger than
	  the data item seen at link time, it is silently truncated in
	  the process.

	  So when SHA3 hashes were was added to the nettle_hashes array
	  in the nettle-3.3 release, this way of linking produces a
	  truncated array at load time, no longer NULL-terminated.

	  We will get similar problems for planned extensions of the
	  internal struct ecc_curve, and exported data items like

	    extern const struct ecc_curve nettle_secp_256r1;

	  where the ecc_curve struct is only forward declared in the
	  public headers. To prepare, applications should migrate to
	  using the new function nettle_get_secp_256r1, and similarly
	  for the other curves.

	  In some future version, the plan is to add a leading
	  underscore to the name of the actual data items. E.g.,
	  nettle_hashes --> _nettle_hashes, breaking the ABI, while
	  keeping the nettle_get_hashes function and the nettle_hashes
	  macro as the supported ways to access it. We will also
	  rename nettle_secp_256r1 --> _nettle_secp_256r1, breaking
	  both ABI and API.

	  Note that data items like nettle_sha256 are *not* affected,
	  since the size and layout of this struct is considered part
	  of the ABI, and R_X86_64_COPY-relocations then work fine.

Log message:
Convert all occurrences (353 by my count) of

	MASTER_SITES= 	site1 \
			site2

style continuation lines to be simple repeated

	MASTER_SITES+= site1
	MASTER_SITES+= site2

lines. As previewed on tech-pkg. With thanks to rillig for fixing pkglint
accordingly.