Log message:
Update 1.68 to 1.70
-------------------
1.70 Sat Jan 25 06:44:12 PST 2014
  - Minor patch to 1.69, as encoding function is only reliably supported
  by Perl newer than v5.8.1.

  - Patch internal method openFileWithEncoding(), so that older Perl
  version will not give an error.

  - Fixed a warning in fromFileGuessOS, introduced in 1.69.

1.69 Tue Jan 14 10:22:19 PST 2014

  Fix a minor bug in pivot() related to colToSplitIsStringOrNumeric.

  Integer column names are allowed. However, fromFile by default does
  not take numeric column names, unless allowNumericHeader is set to
  1.
  Patch fromFile(), checkHeader(), colIndex(), fromFileIsHeader(), \ 
fromFileGetTopLines()
  to support numeric column header.
  An integer is first interpreted as a column name. Therefore,
  accessing a column by its ordinal number may not be possible, if the
  number is used as a column name. In such case, first fetch the
  corresponding column name and access by name.

  Support file encoding methods in fromFile, fromCSV, fromTSV.  E.g.,
  fromCSV("filename, 1, undef, {encoding=> 'UTF-8'}) UTF-8 is the
  default encoding, can be controlled by
  $Data::Table::DEFAULTS{ENCODING}.  Thanks to questions asked by
  Sergio Basto and Thomas Hofmann.

  If an integer is passed to colIndex(), it is interpreted as string
  first for column lookup.  fromFile by default will allow numeric
  headers (but not all column headers can be numeric).

  support skip_empty in melt();

Log message:
Remove pkgviews: don't set PKG_INSTALLATION_TYPES in Makefiles.

Log message:
Bump for perl-5.20.0.
Do it for all packages that
* mention perl, or
* have a directory name starting with p5-*, or
* depend on a package starting with p5-
like last time, for 5.18, where this didn't lead to complaints.
Let me know if you have any this time.

Log message:
Update to 1.68

Upstream changes:
1.68 Mon Aug  6 22:22:22 PDT 2012

  Patch fromFileGetTopLines() and fromFileIsHeader(), which are used by \ 
fromFile(). Impact: minor.
  Improve performance of fromFileGuessOS()
  Improve fromFile(), fromCSV(), csv() to support using \r, \n within a CSV field.

  join() now supports {matchNULL => 1, NULLasEmpty => 1}, if one would \ 
like to treat NULL as empty string, or
  treat NULL as equal (however, not equal to empty string). Both are set to 0 by \ 
default.
  Suggested by Kyle Horton & Wilson Dave.

  Remove inheritance from AutoLoader and Exporter.
  Thanks to Brian Wightman

  Thanks to Nicholas Andonakis for sharing his code, quite a few ideas in his \ 
package inspired the improvements below!

  Add new shortcut methods: lastRow(), lastCol(), colName($colNumericIndex)
    One can now write
      foreach my $i (0..$t->lastRow)
    instead of
      foreach my $i (0..$t->nofRow-1)

  Add iterator(), so that one can now write
    my $next = $t_product->iterator();
    while (my $row = $next->()) {
      # have access to a row as a hash reference, access row number by &$next(1);
      $t_product->setElm($next->(1), 'ProductName', 'New! \ 
'.$row->{ProductName});
    }

  addCol() can take the default value for the new column (first argument)
  addRow() supports {addNewCol => 1}
  moveCol() can take a $newColName.

  setElm() can set a value for multiple cells, specified by ref to row array and \ 
col array
  match_string(), match_pattern(), match_pattern_hash() also produce \ 
$parentTable->{MATCH}

    # match returns all matched row ids in $t_product->{MATCH} (ref to row ID \ 
array)
    $t_product->match_pattern_hash('$_{UnitPrice} > 20');
    # create a new column, with 'No' as the default value
    $t_product->addCol('No', 'IsExpensive');
    # use $t_product->{MATCH} to set values for multiple Elements
    $t_product->setElm($t_product->{MATCH}, 'IsExpensive', 'Yes');

1.67 Wed Jul 25 11:47:23 PDT 2012
  Update Change.txt file to point out $keepRestCol defaults to 1 is only for group()
  For pivot(), $keepRestCol is still default to 0 as before.

1.66 Wed Jul 25 11:03:29 PDT 2012
  Change the default value of keepRestCol in group() to 1, instead of 0 to be \ 
compatible with older versions
  Thanks to Kyle Horton

Log message:
Bump all packages for perl-5.18, that
a) refer 'perl' in their Makefile, or
b) have a directory name of p5-*, or
c) have any dependency on any p5-* package

Like last time, where this caused no complaints.

Log message:
Bump all packages that use perl, or depend on a p5-* package, or
are called p5-*.

I hope that's all of them.

Log message:
Drop superfluous PKG_DESTDIR_SUPPORT, "user-destdir" is default these days.

Log message:
Update to 1.65

Upstream ChangLog:
1.65 Mon Jul 23 20:16:08 PDT 2012
  Finish the "Perl Data::Table Cookbook", should be a good learning \ 
material.
  To download, visit https://sites.google.com/site/easydatabase/

  Polish Data::Table::Excel for CPAN upload.

  Minor patches to the code.

1.64 Sun Jul  8 22:01:17 PDT 2012
  Add $keepRestCols to Data::Table::group();
  We introduce new constants for fromCSV/fromTSV/fromFile/csv/tsv.
    Data::Table::OS_UNIX = 0;
    Data::Table::OS_PC = 1;
    Data::Table::OS_MAC = 2;
  Add method reorder(), redefine column orders
  Add method melt() and cast(), concept borrowed from Reshape package in R
  Add method each_group(), so one can apply a custom method to rows sharing the \ 
same key

  Made a seemingly backward incompatible change to pivot()
    pivot($colToSplit, $colToSplitIsNumeric, ...) is changed to
    pivot($colToSplit, $colToSplitIsStringOrNumber, ...)
  What is now pivot($colToSplit, $Data::Table::STRING, ...), where \ 
Data::Table::STRING has a value of 1,
  was equivalent to pivot($colToSplit, 0, ...) in <= 1.63.
  However, the $colToSplitIsStringOrNumber is now auto-guessed within the code, \ 
so the change is not very relevant.
  Most existing code should run fine, without change.

  Patch group(), piviot() to distinguish keys between empty string and undef.

  Patch subTable() to take row mask array when {useRowMask=>1} is provided.

1.63 Tue Jun 12 17:05:43 PDT 2012
  In this release, we patch addCol, delCol, addRow, rowMerge, colMerge to for an \ 
empty table
  We introduce new methods isEmpty(), hasCol(), moveCol($colID, $newColIdx)
  We introduce new constants for Data::Table::new()
    Data::Table::ROW_BASED
    Data::Table::COL_BASED

1.62 Fri May 25 11:40:09 PDT 2012
  In this release, we address a few pain points

  Data::Table::colMerge, update to support new options
    { renameCol => 1}
    If specified, duplicate column names in the second table is automatically \ 
renamed (by appending _2) to avoid conflict

  We introduce some constants, so we have fewer numbers to remember.
    Data::Table::NUMBER
    Data::Table::STRING
    Data::Table::ASC
    Data::Table::DESC

  for sort(), you can use $t->sort('col2', Data::Table::NUMBER, \ 
Data::Table::DESC); it is equivalent to $t->sort('col2', 0, 1);

    Data::Table::INNER_JOIN
    Data::Table::LEFT_JOIN
    Data::Table::RIGHT_JOIN
    Data::Table::FULL_JOIN

  for join(), you may use $t->sort($t2, Data::Table::FULL_JOIN, ['col1'], \ 
['col1']);
  it is equivalent to $t->sort($t2, 3, ['col1'], ['col1']).

  match_string, match_pattern have been generating @Data::Table::OK, which is a \ 
class-level array.
  $t->match_pattern() will now also store the results (array ref) in \ 
$t->{OK}, that should be used in the future.
  However, @Data::Table::OK is still supported for compatibility reasons.
  This is not a pain point, but conceptually nicer to be localized.

  match_pattern_hash() is added. The difference is each row is fed to the \ 
pattern as a hash %_.  In the case of
  match_pattern, each row is fed as an array ref $_.  The pattern for \ 
match_pattern_hash() becomes much cleaner.
  If a table has two columns: Col_A as the 1st column and Col_B as the 2nd \ 
column, a filter "Col_A>2 AND Col_B<2"
  is written before as
    $t->match_pattern('$_->[0] > 2 && $_->[1] <2');
  where we need to figure out $t->colIndex('Col_A') is 0 and \ 
$t->colIndex('Col_B') is 1, in order to build the pattern.
  Now you can use column name directly in the pattern:
    $t->match_pattern_hash('$_{Col_A} >2 && $_{Col_B} <2');
  This method creates $t->{OK}, as well as @Data::Table::OK, same as \ 
match_pattern().

  Data::Table::rowMerge, update to support new options
    { byName =>1, addNewCol => 1}
    If byName is 1, rows in the second table are appended by matching their \ 
column names, so that the second table
      can have columns in a different order.
    If addNewCol is 1, columns not exist in the first table will be \ 
automatically added.
      addNewCol is best used with byName. If used alone, addNewCol will just \ 
patch the two tables so that they have
      the same number of columns.
  Data::Table::subTable, update internal to remove side effect on column header array
  Data::join add support for an option {renameCol => 1}.
    If specified, duplicate column names in the second table is automatically \ 
renamed (by appending _2) to avoid conflict

1.61 Mon Feb 27 21:07:55 PST 2012
  Data::Table::fromSQL now can take DBI::st instead of a SQL string. This is \ 
introduced, so that
  variable binding (such as CLOB/BLOB) can be done outside the method.

1.60 Sat Feb 25 19:26:46 PST 2012
  Data::Table::addRow now also can take a hash reference. Hash keys are column names,
  undef will be the value, if a column name is not found in the hash.
  Suggested by Federico

1.59 Sun Feb  5 00:20:00 PST 2012
  I have never checked those CPAN ticket, happened to discover them and address \ 
them in this version.
  Update document, explain Data::Table::fromCSV(\*STDIN, 1) can be used to read \ 
table from STDIN.
  Add tbody and thead to Data::Table::html, if it's portrait.
  Suggested by Ken Rosenberry.
  Modify Data::Table::html and Data::Table::html2, so that it can accept \ 
coloring via CSS
  The color now can be either specified as an array as before, or as three CSS \ 
class names
  Suggested by Xavier Robin

1.58 Thu Feb  2 20:33:03 PST 2012
  Patch join(), prior version of join considers two NULL keys to be equal
  update document, clarify that rowMerge assumes table columns in the same order
  Thanks to Ulrik Stervbo.

1.57 Thu Apr 23 15:22:36 PDT 2009
  Patch pivot(), it throws warning before, when colToFill is undef.

1.56 Fri Aug 22 15:53:29 PDT 2008
  When the first line in a TSV is not a header, but contains strings such as \t.
  The program will not transform \t to a tab.
  Modify fromTSV, so that \t, \N (etc) transformation is optional.
  Add transform_element flag to fromTSV method to turn on/off the transformation.
  Thanks to Bin Zhou.

1.55 Mon May  5 10:29:44 PDT 2008
  Patch parseCSV. fromFile guesses the wrong delimiter if some ending columns \ 
are empty.

Log message:
Revision bump after updating perl to 5.14.1

Log message:
Reset maintainer.