Log message:
(sysutils/cfengine3) Regen PLIST

Log message:
Update to 3.15.2

Upstream changes:
3.15.2:
        - 'if' constraint now works in combination with class contexts
          (CFE-2615)
        - Fixed rare crashing bug when parsing zombie entries in ps
          output. The problem was only ever observed on AIX, but could
          theoretically happen on any platform depending on exact libc behavior.
          (ENT-5329)
        - Fixed ifelse() to return fallback in case of unresolved variables
          (ENT-4653)
        - Fixed service status cfengine3 on systemd managed hosts (ENT-5528)
        - Improved management of secondary groups to avoid intermediary state \ 
failures
          (ENT-3710)

Log message:
Revbump for icu

Log message:
revbump after updating security/nettle

Log message:
revbump after boost update

Log message:
cfengine3: Update to 3.15.1. Un-BROKEN.

3.15.1:
	- `cf-check diagnose --test-write` can now be used to test writing into LMDB files
	  (ENT-4484)
	- Added cf-postgres requirement to cf-apache and cf-hub systemd units
	  (ENT-5125)
	- Added new binary version macros:
	  - `@if maximum_version(x)`
	  - `@else`
	  - `@if between_versions(x, y)`
	  - `@if before_version(x)`
	  - `@if at_version(x)`
	  - `@if after_version(x)`
	  (CFE-3198)
	- Added warning if CSV parser parses nothing from a non-empty file
	  (CFE-3256)
	- Fixed an issue causing duplicate entries in sys.interfaces, and
	  sys.hardware (CFE-3046)
	- Fixed crashes and memory leaks in JSON and mustache code
	- Fixed memory leak in handling of inline JSON in policy evaluation
	- Made classfiltercsv() fail properly on invalid class expression index
	- Measurements promises with no match no longer produce errors
	  (ENT-5171)
	- Moved error reading file in countlinesmatching() from verbose to error
	  (CFE-3234)
	- Removed (USE AT YOUR OWN RISK) from cf-key help menu for -x
	  (ENT-5090)
	- Variable references with nested parentheses no longer
	  cause errors (CFE-3242)
	- Version macros now accept single digits (CFE-3198)
	- cf-agent: report purged dirs and files as repaired in 'files' promises (CFE-3260)
	- cf-check: Added a more user friendly message when trying to print unknown \ 
binary data
	  (ENT-5234)
	- cf-check: Added data validation for cf_lastseen.lmdb (CFE-2988)
	- cf-check: Added nice printing for nova_agent_executions.lmdb
	  (ENT-5234)
	- cf-check: Added validation for timestamps in cf_lock.lmdb (CFE-2988)
	- cf-check: Added validation for timestamps in lastseen.lmdb (CFE-2988)
	- cf-check: Fixed issue causing repair to target the wrong database file
	  (ENT-5309)
	- cf-check: Symlinked LMDB databases are now preserved in repair
	  Performs diagnosis and repair on symlink target instead of symlink.
	  Repaired files / copies are placed alongside symlink target.
	  In some cases, the symlink target is deleted to repair a corrupt
	  database, and the symlink is left as a broken symlink. This is
	  handled gracefully by the agent, it will be recreated. Broken
	  symlinks are now detected as an acceptable condition in diagnose,
	  it won't try to repair them or delete them.
	  (ENT-5162)
	- Fixed selection of standard_services by default when used from non-default \ 
namespace (ENT-5406)

3.15.0:
	- New policy function basename() added (CFE-3196)
	- Added read_module_protocol() policy function
	  This function reads module protocol from a file, and can be used
	  for caching the results of commands modules. (CFE-2973)
	- The @ character is now allowed in the key of classic arrays defined
	  by the module protocol (CFE-3099)
	- nth() policy function now supports negative indices (CFE-3194)
	- Fixed .xy floating point numbers parsing in eval() (CFE-2762)
	- Added inform constraint to commands promises, to allow suppression of
	  INFO log messages (CFE-2973)
	- Changed unless constraint to be more consistent with if
	  For any situation where if would NOT skip a promise, unless
	  will cause the promise to be skipped. When there are
	  unresolved variables / function calls, if will skip, unless
	  will NOT skip. (CFE-3160)
	- Default minimum allowed TLS version is now 1.1 (ENT-4616)
	- Network protocol version 2 is now called "tls"
	  "tls" or "2" can be used in places where you specify network
	  protocol. Log messages were altered, to show "tls" instead of
	  "latest". (ENT-4406)
	- Introduced protocol version 3 - "cookie"
	  This protocol is identical to version 2 ("tls"),
	  except it allows the enterprise reporting hub to send
	  the COOKIE command to enterprise hosts. This command is used for
	  detecting hosts using duplicate identities. Protocol version "latest"
	  now points to version 3. For community installations, it should not
	  make a difference, policy servers will not send this command. The only
	  visible difference is the new version number (in logs and policy).
	  (ENT-4406)
	- Package modules now hit network when package cache is first initialized
	  (CFE-3094)
	- Fixed promise skipping bug in unless (CFE-2689)
	- Fixed error message for unexpanded variables in function calls in unless
	  (CFE-2689)
	- Prevented buffer overflow when policy variable names are longer than
	  1024 bytes
	- Zero bytes in class guards no longer cause crashes (CFE-3028)
	- Fixed bug in ps parsing on OpenBSD / NetBSD causing bootstrap to fail
	- Fixed crash in policy/JSON parsing of numbers with too many decimal
	  points (CFE-3138)
	- copy_from without preserve now respects destination mode (ENT-4016)
	- Removed stime_range and ttime_range constraints from promise hash
	  (ENT-4921)
	- Fixed promise result when using process_stop in processes type promises
	  (ENT-4988)
	- cf-execd now sends SIGKILL to the agent process in case of
	  agent_expireafter, after attempting SIGINT and SIGTERM (CFE-2664)
	- cf-serverd now tries to accept connection multiple times (CFE-3066)
	- Fixed multiple measurements tracking growth of same file (ENT-4814)
	- Set create permissions of monitord files in state directory to 0600
	  0600 matches the permissions enforced by policy.
	  Affected files:
	   * state/cf_incoming.*
	   * state/cf_outgoing.*
	   * state/cf_users
	   * state/env_data
	  (ENT-4863)
	- Clarified descriptions of io_writtendata and io_readdata (ENT-5127)
	- Clarified log message about process_count and restart_class being used
	  concurrently (CFE-208)
	- Agent runs that hit abortclasses now record results (ENT-2471)
	- An ID of rhel in os-release file will now define both rhel and redhat
	  classes (CFE-3140)
	- Version specific distro classes are now collected by default in
	  Enterprise (ENT-4752)
	- redhat_8 and redhat_8_0 are now defined on RHEL 8 (CFE-3140)
	- Added derived-from-file tag to hard classes based on /etc/redhat-release
	  (CFE-3140)
	- Added sys.bootstrap_id policy variable containing the ID from
	  /var/cfengine/bootstrap_id.dat, if present (CFE-2977)
	- sys.interfaces now contains interfaces even when they only have
	  IPv6 addresses (ENT-4858)
	- IPv6-only interfaces added to sys.hardware_(addresses,mac) (CFE-3164)
	- IPv6 addresses are now added to policy variable sys.ip_addresses
	  (CFE-682)
	- IPv6 addresses now respect ignored_interfaces.rx (CFE-3156)
	- hostname now allowed in bindtoaddress (CFE-3190)
	- Fixed issue when removing comments from files in various policy functions
	  This also fixes many erroneous occurences of the error message
	  mentioning:

	     [...] because it legally matches nothing

	  (A warning can still appear if a comment regex actually matches nothing).
	  Also made this comment removing logic faster.
	  Affected functions include:
	  * readstringlist()
	  * readintlist()
	  * readreallist()
	  * peers()
	  * peerleader()
	  * peerleaders()
	  * data_readstringarray()
	  * data_readstringarrayidx()
	  * data_expand()
	  * readstringarray()
	  * readstringarrayidx()
	  * readintarray()
	  * readrealarray()
	  * parsestringarray()
	  * parsestringarrayidx()
	  * parseintarray()
	  * parserealarray()
	  (CFE-3188, ENT-5019)
	- Fixed memory leak in JSON / env file parsing (CFE-3210)
	- Fixed memory leak in handling of nfs / fstab (CFE-3210)
	- Fixed memory leak in string_replace() and regex_replace() (CFE-3210)
	- Fixed memory leak when using with constraint (CFE-3210)
	- Fixed minor memory leak in policy evaluation (CFE-3210)
	- Fixed small memory leak in SQL database promises (CFE-3210)
	- Received SIGBUS now triggers a repair of local DBs (CFE-3127)
	- Corrupted LMDB files are now automatically repaired (CFE-3127)
	- Keys in the lock database, cf_lock.lmdb, are now human-readable
	  (CFE-2596)
	- Local databases now use synchronous access on AIX and Solaris (ENT-4002)
	- Report corrupted local database with a critical log message (CFE-2469)
	- Local DB errors are now logged with the particular DB file path (CFE-2469)
	- cf-check: repair now preserves readable data in corrupted LMDB files
	  (CFE-3127)
	- cf-check: --dump option was added to the backup command
	- cf-check: Added --no-fork to diagnose command (CFE-3145)
	- cf-check: Added -M manpage option and other common options (CFE-3082)
	- cf-check: No DB files in state dir now causes errors
	- cf-check: dump command now dumps DB contents to JSON5 (CFE-3126)
	- cf-check: help command can now take a topic as argument

3.14.0:
	- A bootstrap_id.dat file is now generated on every bootstrap
	  (CFE-2977)
	- Added options to cf-net to set minimum TLS version and ciphers
	  (ENT-4617)
	- Added --no-truncate option to cf-key
	  This option, when used with --show-hosts changes the formatting
	  of the output. Instead of padding and truncating each of the
	  fields, they are printed, in full, with no padding, and separated
	  by a single tab character. The output is not as pretty, but should
	  be more useful for parsing by other scripts / tooling. (CFE-3036)
	- Added a new option --skip-db-check to agent and execd
	  This option allows you to enable/disable database (LMDB) consistency
	  checks. Initially it is disabled by default, but this will likely
	  change. (CFE-2893)
	- Added a new utility to contrib: cf-remote
	  cf-remote is a python + fabric tool to log in to remote hosts
	  you have ssh access to. It can be used to download, transfer,
	  and install cfengine packages as well as bootstrapping etc.
	  At this point, cf-remote is not packaged with CFEngine, but can be
	  installed separately from:
	  https://github.com/cfengine/core/tree/master/contrib/cf-remote
	  (CFE-2889)
	- Added derived-from-file tags to hard classes based on /etc/debian_version and \ 
/etc/issue
	- Added a function to filter CSV-files by classes (CFE-2768)
	- Forward slash is now an allowed character in module protocol commands
	  (CFE-2478)
	- Augments files can now handle class expressions by appending '::'
	  A condition in an augments file is treated as a class expression
	  if it ends in ::. Otherwise it is treated as a regular
	  expression. (CFE-2954)
	- Internal ps command can now handle longer usernames (CFE-2951)
	- Made copylink_pattern honor '/../' in copy source (CFE-2960)
	- CSV parser now supports CRLF inside double quotes (ENT-4504)
	- Added an error when a function defining a variables still fails at
	  pass 3 (CFE-2983)
	- Documented cf-execd and cf-serverd response to SIGHUP in manpage
	  (CFE-2853)
	- Stopped trimming leading zeroes in ubuntu minor version class
	  The old version detection logic (using /etc/debian_version) was
	  converting the minor version part to an integer, defining
	  ubuntu_18_4 instead of ubuntu_18_04. The new platform detection
	  (based on /etc/os-release) defines ubuntu_18_04. Since both old
	  and new methods are running to maximize compatibility, both
	  ubuntu_18_04 and ubuntu_18_4 were defined.
	  This commit ensures that the old detection logic treats the
	  minor version (the 04 part) as a string, not an integer. The
	  change is specific to Ubuntu, and should affect Ubuntu 18.04,
	  16.04, 14.04, etc. (CFE-2882)
	- SUID log permissions are now properly enforced (CFE-2919)
	- Agent log file names are now always lowercase
	- Extended module with file protocol for data (CFE-3050)
	- Fixed a segfault in 'cf-promises -p json-full' (CFE-3019)
	- Added cf-key help output to indicate ability to delete by key digest
	  (CFE-2997)
	- Fixed disabling TLS 1.0 (CFE-3068)
	- Fixed growing memory footprint of daemons (CFE-3032)
	- Fixed the log message about setting collect_window (ENT-4238)
	- Fixed the log message when parsing TIME in 'ps' output fails
	- Fixed parsing of YAML values starting with numbers (CFE-2033)
	- Fixed sys.flavor on AIX (ENT-3970)
	- Fixed 6 cases where promises could get the wrong outcome
	  All cases were related to error handling and detected using
	  static code analysis (LGTM). They were limited to cf-monitord
	  and cf-agent (guest_environments and files promise types). Due
	  to a programming mistake, promise results would sometimes be
	  overwritten with 'skipped' outcome. Keeping the previous
	  value or making the promises 'not kept' is expected behavior.
	  Added a query to our CI (LGTM) to make sure we catch this error
	  on new contributions.
	- Fixed an issue while parsing ps output on AIX (ENT-4295)
	- Fixed a memory leak in filesexist function (ENT-4313)
	- Fixed a memory leak in mustache rendering (ENT-4313)
	- Fixed a memory leak in: differences(), intersection(), unique()
	  (ENT-4586)
	- Fixed a segfault in policy parser (ENT-4022)
	- Connection cache is now global (CFE-2678)
	- Increased verbosity of AcquireLock permission error (ENT-4395)
	- Message about invalid class characters from module protocol moved to VERBOSE
	  (CFE-2887, CFE-3008)
	- Prevented buffer overflows in cf-monitord data parsing
	- Private keys generated by cf-key are no longer encrypted
	  Private key files encrypted with a broken cipher and default
	  hard coded passphrase provide no real security, and is only an
	  inconvenience. Maybe it was intended to add a password prompt
	  later, but it's been 10 years now, and the cipher and passphrase
	  remain untouched. The function which reads keys still supports
	  both encrypted and unencrypted keys, it will decrypt if necessary.
	- Reduce SSL/TLS shutdowns on bad networks (CFE-3023)
	- Removed programming error in handling of process_count body
	  Previously, having a failing function call inside in_range_define
	  or out_of_range_define would cause a programming error when
	  trying to define that as a class. Fixed it by detecting the
	  case, printing a normal error, and skipping defining the class. (CFE-2067)
	- Set policy->release_id to "failsafe"/"bootstrap" when \ 
running failsafe.cf
	  (CFE-3031)
	- Switched permissions of various temporary files in state to 0600
	  These files were created with 0644 permissions, and then
	  repaired in policy. However, since they are deleted / recreated
	  periodically, it causes INFO noise. Safer and better user
	  experience to create them with restricted permissions to
	  begin with.
	  Affected files:
	  * $(sys.statedir)/cf_procs
	  * $(sys.statedir)/cf_rootprocs
	  * $(sys.statedir)/cf_otherprocs
	  (ENT-4601)
	- string_split segments are now truncated to 1024 bytes instead of
	  crashing (CFE-3047)
	- Unresolved function calls in process_select body are now skipped
	  Function calls which always fail, like getuid("nosuchuser"), are
	  never resolved. Previously this would cause a programming error,
	  since the body is expected to have a list of strings, not
	  unresolved function calls.
	  The function calls are silently skipped (with a verbose message)
	  as this matches the behavior of calling the functions in a vars
	  promise, and using that as a body parameter.
	  (CFE-1968)
	- cf-check directories can now be controlled from ENV vars (CFE-2994)
	- cf-check: Added backup command
	  This command copies lmdb files to a timestamped backup directory.
	  (ENT-4064)
	- cf-check: diagnose and backup now use state directory by default
	  (ENT-4064)

3.13.0:
	- Add support for TLS 1.3 and its ciphersuites
	- Add 'feature' hard classes for supported TLS versions
	  Different versions of TLS are supported depending on what version
	  of OpenSSL CFEngine was compiled and linked with. Newly added
	  feature hard classes bring that information to the
	  policy. Classes like these are now defined (for supported
	  versions of TLS):
	  feature_tls                     source=agent,hardclass
	  feature_tls_1                   source=agent,hardclass
	  feature_tls_1_0                 source=agent,hardclass
	  feature_tls_1_1                 source=agent,hardclass
	  feature_tls_1_2                 source=agent,hardclass
	  feature_tls_1_3                 source=agent,hardclass
	- Add a new variable $(sys.default_policy_path)
	  A new sys variable that provides the path of the default policy
	  file evaluated when no file is specified with the '-f' option.
	- Add an option to skip the initial policy run on bootstrap
	  In some cases it may not be desired to run the policy as the last
	  step of the bootstrap. This can be done with the new
	  '--skip-bootstrap-policy-run' option for cf-agent. (CFE-2826)
	- Trigger promises.cf as the last step of bootstrap (CFE-2826)
	- Add support for overriding the package module's path (CFE-2103)
	- Add support for setting package module interpreter (CFE-2880)
	- Added --log-level option to all components
	  This allows you to specify any log level (info, verbose, debug etc.).
	  It is also less strict, allowing different spelling. As an example,
	  --log-level i, --log-level INFO, --log-level inform are all the same.
	- Added a new binary: cf-check
	  Corrupt local databases (LMDB) continues to be a problem.
	  cf-check will be used to diagnose and remediate problems
	  with corrupt databases. It is a standalone binary, which
	  doesn't evaluate policy or use the local databases, thus
	  it can be used in situations where the other binaries
	  like cf-agent would hang.
	  cf-check replaces our lmdb database dumper, lmdump.
	  cf-check lmdump or symlinking / renaming it to lmdump
	  will make cf-check have the exact same behavior as lmdump.
	  cf-check will include much more functionality in the future
	  and some of the code will be added to other binaries,
	  for example to do health checks of databases on startup.
	  Ticket: (ENT-4064)
	- Added function string_replace. (CFE-2850)
	- Allow dots in variable identifiers with no such bundle
	  As described and discussed in CFE-1915, defining remote variables
	  (injecting variables into remote bundles) is dangerous and must
	  be blocked. However, using a dot-separated common prefix for
	  variables raises no security concerns and can be considered
	  valid. (CFE-1915)
	- Allow requiring TLS 1.3 as the minimum version
	- Apply augments after vars, classes and inputs in def.json
	  (CFE-2741, CFE-2844)
	- Bundle name is now part of the log message when aborting a bundle
	  (CFE-2793)
	- Class names set by module protocol are automatically canonified
	  (CFE-2877, CFE-2887)
	- Classes failsafe_fallback and bootstrap_mode are now reported by default
	- Correct log level for data_readstringarray* (CFE-2922)
	- Do not iterate over JSON objects' properties in mustache (CFE-2125)
	- Do not render templates when passed invalid data (CFE-2194)
	- Eliminated error messages caused by attempting to kill expired processes
	  (CFE-2824)
	- Fix cf-runalerts systemd unit conditions so the service will run
	  (ENT-3929)
	- Fix the off-by-one error in cf-runagent background process spawning
	  (CFE-2873)
	- Fixed OOB read / heap buffer overflow in evaluator (ENT-4136)
	- Fixed a memory leak which occured when reloading RSA keys from disk
	  (CFE-2857)
	- Fixed a memory leak which occured while loading augments files
	  (CFE-2913)
	- Fixed an issue with splay time in cf-execd (CFE-2931)
	- Fixed error handling and memory leak in cf-key (CFE-2918)
	- Fixed memory leak in JSON to policy conversion (ENT-4136)
	- Fixed memory leak in lmdb cleanup (CFE-2918)
	- Fixed memory leaks in cf-agent during bootstrap (CFE-2918)
	- Fixed memory leaks in variablesmatching() and findfiles() (CFE-2918)
	- Fixed missing class with mustache templates in warn_only mode
	  (CFE-2600)
	- Fixed small memory leak in cf-serverd (CFE-2918)
	- Fixed small memory leak in cf-upgrade (ENT-4136)
	- Fixed small memory leaks of environment variable strings (CFE-2918)
	- LMDB database dumper, lmdump, no longer creates empty databases
	  (ENT-4064)
	- Made variablesmatching functions treat args regexes more correctly
	  variablesmatching() and variablesmatching_as_data() no longer
	  use string comparison to find matches. The documentation is clear;
	  arguments should be regexes (so you have to escape special
	  characters).
	  bundle agent main
	  {
	      vars:
		  "myvar"
		      string => "example",
		      meta => {"os[linux]"};
		  "matches"
		      slist => variablesmatching(".*", "os\[linux\]");
	      reports:
		  "Match: $(matches)";
	  }
	  The above example is correct. If you don't escape the brackets
	  like above, it will no longer work. (You probably shouldn't use
	  brackets in tags anyway).
	- Prevent the init script from managing processes inside containers
	  (ENT-3800)
	- Read mustache-rendered files in text mode when comparing digest
	  (ENT-2526)
	- Reload persistent classes on config reload in cf-execd and cf-serverd
	  (CFE-2857)
	- Fixed issue with @if macro failing when it is on the first line.
	  (CFE-2817)
	- Fixed issue with cf-agent intermittently hanging on windows
	  sometimes (ENT-3756)
	- change GIT_BRANCH to GIT_REFSPEC and remove Design Center vars
	  (ENT-4023)
	- os-release file is now used for hard classes and sys.flavor on all linuxes
	  This will improve platform detection on newer operating systems where
	  /etc/os-release (or /usr/lib/os-release) is present.
	  A hard class will be set for the value of the ID key (canonified with
	  underscores), if it exists. If both ID and VERSION_ID exist, multiple
	  hard classes will be set for all parts of the version number. The
	  special variable sys.flavor will also be set by determining major
	  version from VERSION_ID.
	  Example os-release file:
		ID=coreos
		VERSION_ID=1185.3.0
	  For the example above, sys.flavor will be coreos_1185 and 4 hard
	  classes will be set; coreos_1185_3_0, coreos_1185_3, coreos_1185,
	  and coreos.
	  For backwards compatibility, older distribution specific logic is still
	  executed and may overwrite sys.flavor and define hard classes as before.
	- refactor use of atexit to use custom cleanup function instead. On Windows
	  atexit() unloads DLLs before and/or during atexit functions being called
	  which causes bad behavior. (ENT-3756)

3.12.0b1:
	New Features:
	- Add a --key-type option to specify RSA key size to cf-key
	- New hash_to_int policy function (CFE-2733)
	- Issue a warning on ignored locking attributes (CFE-2748)
	- Add IPv6 hard classes with the "ipv6_" prefix (CFE-2310)
	- Introduce "missing_ok" attribute in body copy_from
	  This allows to ignore missing sources in file copy operations (CFE-2365)
	- Enable Xen hypervisor detection on all x86 platforms (CFE-2203)
	- Add sys.policy_entry variables (CFE-2572)
	- Added inline_mustache template method (CFE-1846)
	- New component cf-net (cf-net is a CLI for the CFEngine network protocol,
	  useful for debugging, testing etc) and accompanying policy variable
	  sys.cf_net containing path to cf-net binary

	Changes:
	- Load augments at the end of context discovery
	  This means that classes defined as part of the context discovery
	  (e.g. 'am_policy_hub' and 'policy_server') can be used in the
	  augments (CFE-2482)
	- Open measurements promise type from enterprise cf-monitord
	- Transform filesexist() into a collecting function (CFE-2744)
	- Load process table when actually needed for a processes promise (ENT-2536)
	- Ignore commented out entries in fstab when edit_fstab is true (CFE-2198)
	- Do not move obstructions in warn policy mode (CFE-2740)
	- Made the max bytes parameter to file reading functions optional (CFE-2656)
	- Do not tag large volatile variables for inventory
	  sys.interfaces_data, sys.inet and sys.inet6 are commonly larger than the
	  maximum data size allowed to be collected by cf-hub. Data larger than 1k
	  is truncated. Instead of reporting truncated data this change stops
	  tagging the variable so that it will not be collected to the Enterprise
	  hub and will not be available in Mission Portal. (ENT-3483)
	- cf-execd now re-parses augments on policy reload (CFE-2406)
	- Improve misleading verbose message
	  For constraints if/ifvarclass/unless, we now print the whole rval of the \ 
constraint.
	  Previously the message was just "skipping variable because ifvarclass is \ 
not defined" while the variable itself was defined.
	  Old message example:
	    verbose: Skipping promise 'mailto' because 'if'/'ifvarclass' is not defined
	  Changed to:
	     verbose: Skipping promise 'mailto' because 'ifvarclass => \ 
not(isvariable("mailto"))' is not defined
	  (CFE-2697)
	- Promise comments for file changes moved to verbose (ENT-3414)
	- Suppress output from systemctl based restart of services in
	  bootstrap/failsafe (CFE-1459)
	- Parser can now handle larger inbut buffers (CFE-1886)
	- Improve logging of ACL errors (ENT-3455)
	- cf-execd systemd service now only kills cf-execd itself (ENT-3395)
	- Load multiple augments from "augments" string array in def.json
	  (CFE-2084)
	- Improve support for Alpine Linux
	- Set the exit value when running cf-key
	  When running cf-key to generate new keys, set the exit value of the
	  program to be 0 on success and 1 on failure. This makes it easier to
	  catch errors during setup of a new machine.
	  Change the default behavior of the program to not write anything to stdout,
	  opting to use the Log() function which can write to stdout and will also
	  allow output to be sent to syslog.
	  Add a --inform option to set the global log level to LOG_LEVEL_INFO.
	  Change the permissions of the randseed file to 600 and catch the exception
	  if the chmod call fails.
	- Properly reverse-resolve DNS names longer than 63 chars (ENT-3379)
	- Properly redirect init script to systemd on debian systems (ENT-3326)

	Bug fixes:
	- Disallow modifications of variables from a remote bundle (CFE-1915)
	- Speedup evalution by not copying variables table when expanding a promise
	  (CFE-2524)
	- Resolve subkey conflicts when converting to JSON
	  Whenever there is a conflict of array variable definitions prefer
	  the container subkeys over simple values when converting to JSON
	  (CFE-2536)
	- Do not ignore meta promises in server bundles (CFE-2066)
	- Add a debug log for computed class in splayclass
	- Don't error when calling isexecutable on broken link (CFE-741)
	- Fix segfault when no show-evaluated-vars/classes is specified
	- Fix memory leak in cf-execd, triggered when sending email failed (CFE-2712)
	- Fix IPv6 parsing to be un-reversed (CFE-2580)
	- Fix bug preventing permission changes on Unix sockets (CFE-1782)
	- Fix storage mount promise when existing mountpoint has a similar path
	  (CFE-1960)
	- Fix segfault when cf-promises -p is called against a file with syntax
	  errors (CFE-2696)
	- Fix rare cf-execd hang (CFE-2719)
	- Fix mergedata segfault when called on a non-container (CFE-2704)
	- Do not segfault if policy_server.dat only contains whitespaces and/or line breaks
	- Fix segfault on JSON policy files with no bundles and bodies (CFE-2754)

3.11.0:
	New Features:
	- Allow function calls in promiser using universal "with" attribute
	  (CFE-1092)
	- Add example of with attribute (CFE-1092)
	- Detect Amazon Linux and set "AmazonLinux" hard class and
	  sys.flavour variable
	- New sysctlvalue() and data_sysctlvalues() functions from /proc/sys
	  (CFE-2513)
	- readdata() also auto-detects .yml files as YAML
	- Added support for ENV and CSV file parsing (CFE-1881)
	- Added vars and classes for CoreOS (ENT-3043)
	- cf-agent: implement --show-evaluated-vars and --show-evaluated-classes
	- Support for custom ports and host names as policy hub (CFE-953)
	- cf-promises: allows --show-vars and --show-classes to take an optional filter
	- Added a new tool: cf-net. cf-net is a CLI for the CFEngine
	  network protocol, useful for debugging, testing etc (CFE-2493)
	- New policy variable: sys.cf_net contains path to cf-net binary
	- Read /etc/os-release into sys.os_release (CFE-1881)

	Changes:
	- readintlist() now prints an error if the
	  file contains real numbers, not integers, and aborts; previously it was
	  printing an info-level error message, was half-reading an integer out of
	  the real, and was continuing successfully.
	- "make tar-package" should create a tarball with the contents of
	  "make install" (ENT-3041)
	- Allow opening symlinks owned by root or by the current user
	  (CFE-2516)
	- Change warning message about depth_search on a non directory to
	  DEBUG level
	- Ensure synchronous start and stop with systmectl (ENT-2841)
	- Put logs in /var/log and PID files in /var/run when using FHS layout
	  (CFE-2449)
	- readstringlist(), readintlist(), readreallist(): Print
	  verbose instead of error message if file can not be read
	- cf-serverd: Do not close connection when file does not exist
	  (CFE-2532)
	- policy_server.dat now appends a newline and supports host & port
	- Allow string_head and string_tail to take negative arguments
	- getvalues(inexistent_var) returns an empty list.
	  Restores 3.7.x and earlier behaviour. (CFE-2479)
	- Partially restore old getvalues(array) behaviour
	  Bugfix: getvalues() now behaves correctly for old CFEngine
	  arrays of depth 1
	  Behaviour change: it always returns a list now. Even when v is a simple
	  string (i.e. not an iterable) it will return an slist with one element:
	  the value of the string variable.
	  Known issues: getvalues() still misbehaves with double-indexed arrays
	  (see CFE-2504, CFE-2536)
	- The source version of CFEngine now installs binaries into
	  bin folder instead of sbin folder (CFE-2448)
	- Don't error during dry run for proposed execution (CFE-2561)
	- Print verbose instead of error message when readfile() fails (CFE-2512)
	- cf-serverd: Auto configure max open files ulimit according to
	  maxconnections (CFE-2575)
	- Made the max bytes parameter to file reading functions optional.
	  Affects readfile(), readenvfile(), readcsv()

	Bug fixes:
	- Fix insert_lines related memory corruption (CFE-2520)
	- Prevent LMDB assertion on AIX by ensuring nested DB calls are
	  not occuring during signal handler cleanup (CFE-1996)
	- Fix a bug which could cause cf-execd to believe there was
	  an error when sending the email report, when there really wasn't
	- zendesk#3204: Fix "lastseenexpireafter" 32-bit signed int overflow
	- Fix cf-execd not exiting immediately with SIGTERM on AIX (ENT-3147)
	- Fix automatic service stops based on runlevel (redhat/centos)
	  (CFE-2611)
	- Fix cf-serverd crash when reporting corrupted data (ENT-3023)
	- Fix rare output truncation on Solaris 10/11 (CFE-2527)
	- Fix crash on Solaris when ps ucb variant is not available (CFE-2506)
	- Fix logic to detect when running under a Xen Hypervisor (CFE-1563)
	- Fix "lastseenexpireafter" 32-bit signed int overflow (zendesk#3204)
	- Fix IPv6 parsing to be un-reversed (CFE-2580)

3.10.0:
	New features/additions:
	- All new features/additions for 3.8 and 3.9 are also included in 3.10.
	- Add: Classes body tailored for use with diff
	- New feature: Classes promise: allow classes without an expression to default \ 
to defined.
	- Support for custom ports and host names as policy hub (CFE-953)
	- Add: Definition of from_cfexecd for cf-execd initiated runs
	  (CFE-2386)
	- Add < <= > >= operators to eval().
	- Add testing jUnit and TAP bundles and include them in stdlib.cf
	- New function isipinsubnet() (ENT-7949)
	- LogDebug(): implement module-based debug logging.
	  Now most DEBUG messages are *not* printed even when "-d" is in use, but
	  the specific debug module has to be enabled on the command line. For
	  example to enable all log modules, run:
	  cf-agent -d --log-modules=all
	- Add: edit_line contains_literal_string to stdlib
	- add variablesmatching_as_data() function paralleling variablesmatching()
	  (Redmine #7885)
	- Allow specifying agent maxconnections via def.json (CFE-2461)
	- Add getuserinfo() function
	- Add body agent control select_end_match_eof option. (CFE-2390)
	- Add class to enable post transfer verification during policy updates
	- Add ability to append to bundlesequnece with def.json (CFE-2460)
	- policy_server.dat now appends a newline and supports host & port

	Changes:
	- Rewrite iteration engine to avoid combinatorial explosion with nested \ 
variable expansions.
	  This speeds up enormously the execution of policies that included long
	  slists or JSON containers, that in the past didn't even terminate.
	  Change: "cf_null" string literal was changed to not be something
		  special, and it's now a string that can be used anywhere, like
		  in slists or part of bundlesequence etc.
	  NOTE: Old policy should be grep'ed for "cf_null" and in case such
		occurences were handled specially, they should be reworked.
	  Change: "--empty-list--" is now never printed by format(),
		  an empty list is now printed as "{  }".
	  Change: Order of pre-evaluation was slightly changed, A new "vars" pass
		  at the beginning of pre-evaluation was added. It used to be
		  classes-vars, but it was changed to vars-classes-vars. As a
		  result some classes or variables might be evaluated at a
		  different time than before. As always try to write policy code that works no \ 
matter what the
		  order of execution is.
		  One way is to always *guard* the execution of functions to avoid
		  bogus function results.  For example the following will avoid
		  running execresult() bevore the file has been created:
		    execresult("cmd /path/to/filename") if => \ 
fileexists("/path/to/filename");
	  C internals: NULL Rlist is now perfectly valid, in fact it is the only
		       way to denote an empty Rlist.
	  C internals: Since a slist variable can be NULL, API of
		       EvalContextVariableGet() changed: The way to detect if a
		       variable is found, is not to check return value for NULL,
		       but to check returned *type* for CF_DATA_TYPE_NONE.
		       Fixed what I could find as wrong API uses. (CFE-2162)
	- Allow arbitrary service policies (CFE-2402)
	- Behaviour change: cf-execd: Do not append -Dfrom_cfexecd to exec_command .
	  (CFE-2386)
	- Failsafe/Bootstrap no longer copy files starting with .git (like .gitignore) \ 
or .mailmap
	  (CFE-2439)
	- Change: Enable strict transport security
	- Change: Disable http TRACE method
	- Change: Verify transfered files during policy update
	- Allow getvariablemetatags() and getclassmetatags() to get a specific tag key
	- Change: Use more restrictive unix socket perms (ENT-2705)
	- Add sys.user_data container for user starting agent.
	- Pass package promise options to underlying apt-get call (#802)
	  (CFE-2468)
	- Change: Enable agent component management policy on systemd hosts
	  (CFE-2429)
	- Change: Switch processes restart_class logging to verbose
	- Change: Log level for keeping verbatim JSON to DEBUG (CFE-2141)
	- Change: Require network before cfengine services (CFE-2435)
	- Behaviour change: getvalues(inexistent_var) returns an empty list.
	  Restores 3.7.x and earlier behaviour. (CFE-2479)
	- Behaviour change: when used with CFEngine 3.10.0 or greater,
	  bundles set_config_values() and set_line_based() are appending a
	  trailing space when inserting a configuration option with empty value.
	  (CFE-2466)
	- Behaviour change: getvalues() always returns a list now. Even when v is a simple
	  string (i.e. not an iterable) it will return an slist with one element:
	  the value of the string variable.
	- Behaviour change: readintlist() now prints an error if the
	  file contains real numbers, not integers, and aborts; previously it was
	  printing an info-level error message, was half-reading an integer out of
	  the real, and was continuing successfully.
	- Ensure synchronous start and stop with systemctl (ENT-2841)
	- Change select_region INI_section to match end of section or end of file
	  (CFE-2519)

	Bug fixes:
	- fix files promise not setting ACL properly on directories. (CFE-616)
	- Upgrade CFEngine dependencies to the following versions:
	  - lixml2 2.9.4
	  - OpenSSL 1.0.2j
	  - LibYAML 0.1.7
	  - Curl 7.50.3
	- Fix cumulative() to accept up to 1000 years, like it's documented.
	- Fixed parsing of host name/IP and port number in cf-runagent
	  (CFE-546)
	- Fix intermittent error message of type:
	  "error: Process table lacks space for last columns: <cmd>" \ 
(CFE-2371)
	- storage: Properly initialize the list of current mounts (CFE-1803)
	- Fix 'contain' attribute 'no_output' having no effect when
	  the 'commands' promise is using 'module => "true"'. (CFE-2412)
	- Fix bug which caused empty emails to be sent from cf-execd
	  if there was no previous output log and the new log was fully filtered
	  by email filters. (ENT-2739)
	- allow ifelse(FALSE, $(x), "something else") to work. (CFE-2260)
	- Fix connection cache, reuse connections when possible. (CFE-2447)
	- Fix rare bug that would sometimes prevent redis-server from launching.
	- Fix bug in files promise when multiple owners are promised
	  but first one doesn't exist, and improve logging . (CFE-2432)
	- define kept outcome with action warn if edit_line is as expected
	  (CFE-2424)
	- Example using getvariablemetatags() and getclassmetatags() to get a specific \ 
tag key
	- Remove 2k limit on strings length when writing JSON policies
	  (CFE-2383)
	- Fix ttime_range constraint to go higher than 2G as number of seconds.
	- Change: cronjob bundle tolerates different spacing
	- Allow editing fields in lines longer than 4k (CFE-2438)
	- Don't send empty emails for logs where everything is filtered.
	  (ENT-2739)
	- allow maplist(), maparray(), and mapdata() to evaluate function calls during \ 
iteration
	  (ARCHIVE-1619)
	- insert_lines is no longer implicitly matching EOF as
	  end of the region if 'select_end' pattern is not matched . (CFE-2263)
	- Change: Remove executable bit from systemd units (CFE-2436)
	- cf-serverd should reload def.json when reloading policy (CFE-2406)
	- Fix cf-monitord detection of usernames of the process table on AIX.
	- Speed up local and remote file copying and fix spurious errors.
	  (ENT-2769)
	- Fix occasional segfault when running getindices() on a
	  variable that has indices of multiple depths (e.g. both "a[x]" and
	  "a[x][y]"). (CFE-2397)
	- When no file is provided when calling cf-promises
	  with cf or json output, use promises.cf by default. This restores the
	  previous behavior. (CFE-2375)
	- Fix: Services starting or stopping unnecessarily (CFE-2421)
	- Change: Split systemd units (CFE-2278)
	- EOF is  matched as an end of the region in edit_line
	  promises only if 'select_end_match_eof' parameter is true. (CFE-2263)
	- Fix double logging of output_prefix, and log process name for cf-agent syslog \ 
messages.
	  (CFE-2225)
	- Be less verbose if a network interface doesn't have a MAC address.
	  (CFE-1995)
	- Fix: CFEngine choking on standard services (CFE-2806)
	- fix insert_lines related memory corruption (CFE-2520)
	- fix cf-serverd crash when reporting corrupted data. (ENT-3023)
	- Fix ability to manage INI sections with metachars for
	  manage_variable_values_ini and set_variable_values_ini (CFE-2519)
	- Fix apt_get package module incorrectly using interactive mode.
	- Fix crash on Solaris when ps ucb variant is not available. (CFE-2506)
	- cf-serverd: Do not close connection when file does not exist.
	  (CFE-2532)
	- getvalues() now behaves correctly for old CFEngine arrays of depth 1.
	  Known issues: getvalues() still misbehaves with double-indexed arrays
	  (see (CFE-2504, CFE-2536)

3.9.0:
	New features/additions:
	- Add optional interface parameter to iprange() to match only one interface.
	- Allow '=' in symbolic modes (Redmine #7826)
	- Add: FreeBSD ports package module
	- New package module for FreeBSD pkg package manager.
	- Add support for adding/removing fifos in policy
	- Add Linux parsing of /proc/net/ data.
	  - sys.inet
	  - sys.inet6
	  - sys.interface_data
	  - Data is returned as a data container.
	  - See documentation for more details. (Jira CFE-1991)
	- sys.ip2iface: new reverse mapping variable from IP to interface name
	- Namespaced classes can now be specified on the command line.
	- namespaces can now be passed to cf-runagent -D and --remote-bundles
	  (Redmine #7856)
	- Add 'cf-full' and 'json-full' to cf-promises '-p' option.
	  They generate output based on the entire policy. The existing 'cf'
	  already behaved this way, and it has now been changed to generate
	  output only for a single file, which the existing 'json' option
	  already does.
	- New language functions: processexists() and findprocesses()
	  (Redmine #7633)
	- Implement new regex_replace() function. (Redmine #7346)
	- Add log rotation policy for state/classes.jsonl log. (Redmine #7951)
	- Added collect_vars utility bundle to stdlib
	- Intoduce report_class_log attribute to body agent control.
	  (Redmine #7951)
	- Add standard_services service_method allowing for explicit usage
	- cf-promises --show-vars can now show JSON variables.
	- Add json_pipe mode to mapdata(), which allows piping a
	  JSON container to an external program for manipulation and receiving
	  JSON back. The jq tool is a good example where this mode can be
	  useful. A corresponding $(def.jq) variable has also been added with
	  a default path to this tool. See documentation for mapdata() for
	  more information and examples. (Jira CFE-2071)
	- behaviour change: "true" is always defined and "false" is \ 
never defined in a context expression.
	- Add: nimclient package module for AIX
	  This module provides basic functionality for using nimclient as a means
	  to ensure packages are either present or absent. It does not support
	  listing package updates available or provide any special caching.
	- Add callstack_callers() and callstack_promisers() functions.
	- Log variable definitions in debug output. (Redmine #7137)
	- Add: Memory information to host info report (Jira CFE-1177)
	- In Mustache templates, one can now use {{#-top-}} and
	  {{/-top-}} tags to iterate over the top level element in a
	  container. (Redmine #6545)
	- Add network_connections() function that parses /proc/net
	- Provide new -w argument to override the workdir for testing
	- New feature: Emails sent by cf-execd can be filtered to get
	  rid of emails for unwanted log messages. The attributes
	  mailfilter_include and mailfilter_exclude in body executor
	  control control what to include. See documentation for cf-execd for
	  more information. (Jira CFE-2283)
	- Add: file_make_mustache bundle to render mustache templates
	- Add '-n' flag to cf-key to avoid host name lookups.
	- cf-agent, cf-execd, cf-promises, cf-runagent and cf-serverd honor multiple \ 
-D, -N and -s arguments
	  (Redmine #7191)
	- Add "canonify" mode to mapdata().
	- Add: printfile bodies to stdlib
	- Add: New results classes body [] (Redmine #7418, #7481)
	- Implement cf-runagent --remote-bundles and cf-serverd "bundle" \ 
access promise.
	  (Redmine #7581)
	- Add commands promise arglist attribute, augmenting args attribute.
	- It's now possible to reference variables in inline JSON,
	  for example: mergedata('[ thing, { "mykey": otherthing[123] } ]').
	  thing and otherthing[123] will be resolved as variables, since
	  they are unquoted. See the documentation for more details.
	  (Redmine #7871)
	- Allow inline JSON to be used in the following function
	  calls:
	  - data_expand()
	  - difference()
	  - every()
	  - filter()
	  - format()
	  - getindices()
	  - getvalues()
	  - grep()
	  - intersection()
	  - join()
	  - length()
	  - makerule()
	  - mapdata()
	  - maplist()
	  - mean()
	  - mergedata()
	  - none()
	  - nth()
	  - parsejson()
	  - product()
	  - regarray()
	  - reglist()
	  - reverse()
	  - shuffle()
	  - some()
	  - sort()
	  - storejson()
	  - string_mustache()
	  - sublist()
	  - sum()
	  - unique()
	  - url_get()
	  - variance()
	  For example: mergedata('[ "thing", { "mykey": \ 
"myvalue" } ]')
	  See the documentation for more details. (Jira CFE-2253)
	- Add: edit_line contains_literal_string to stdlib
	- Add body agent control select_end_match_eof option. (Jira CFE-2390)

	Changes:
	- Change: classesmatching(): order of classes changed
	- Change: getindices(), getvalues(), variablesmatching(), maparray():
	  order of variables returned has changed
	- Change: set_quoted_values uses bundle scoped classes
	- Change: set_config_values uses bundle scoped classes
	- Change: set_variable_values uses bundle scoped classes
	- Change: set_config_values_matching uses bundle scoped classes
	- Change: manage_variable_values_ini uses bundle scoped classes
	- Change: set_line_based should use bundle scoped classes
	  (Jira CFE-1959)
	- getvalues() will now return a list also for data containers,
	  and will descend recursively into the containers. (Redmine #7116)
	- Change: Improve git drop user support
	- Use new package promise as default package promise
	  implementation. (Jira CFE-2332)
	- Don't follow symbolic links when copying extended attributes.
	- When a bodydefault:<promise_type>_<body_type> body is
	  defined, it will be used by all promises of type <promise_type>
	  unless another body is explicitly used.
	- cf-serverd no longer appends "-I -Dcfruncommand" to
		     cfruncommand, this has to be done manually in masterfiles
		     body server control. (Redmine #7732)
	- eval() function arguments mode and options are now
	  optional.
	- sort() function argument mode is now optional.
	- Change: returnszero() no longer outputs the output of a command.
	  The output can be seen by enabling info mode (-I).
	- cfruncommand is not executed under shell. (Redmine #7409)
	- Remove: Apache CGI module
	- Change: Make maxbytes arg of readjson() and readyaml() optional
	- Classes matching agent control's abortclasses are
	  now printed before exit, even if they are defined in common bundles.
	  Previously the regex (in abortclasses) that matched the class was
	  printed if the class was defined in a common bundle, but the class
	  itself was printed if it was defined in an agent bundle. With this
	  change, the defined class that caused the abort is always printed.
	- Remove: Support for email settings from augments_file (Redmine #7682)
	- Change: set_variable_values_ini uses bundle scoped classes
	- findfiles() now skips relative paths. (Redmine #7981)
	- Clients connections using non TLS protocol are rejected
	  by default. . (Jira CFE-2339)
	- Change: Policy files specified in the "inputs" section of
	  def.json will no longer be auto-loaded. One has to refer to the
	  which are using the "inputs" field inside def.json. (Redmine #7961)
	- Change: Separate binary details from policy update (Redmine #7662)
	- Add guard for binary upgrade during bootstrap (Redmine #7861)
	- Change: Modernize pkg module and package_method
	- Remove: Userdir apache module
	- filestat(path, "linktarget") now follows non-absolute links and \ 
returns full path of target.
	  This introduces a change in behaviour. Here is an example:
	  $ ls -l /bin/sh
	  lrwxrwxrwx 1 root root 4 Jun  4  2015 /bin/sh -> dash
	  Previously the filestat function would return "dash", and would also log
	  an error that the file can not be read. Now it will return "/bin/dash"
	  (or the final destination if it happens that /bin/dash is also a
	  symlink).
	  You can still get the previous behaviour by using
	  filestat(path, "linktarget_shallow"). (Redmine #7404)
	- Define (bootstrap|failsafe)_mode during update.cf when triggerd from failsafe.cf
	  (Redmine #7861)
	- Behavior change: The promise string of a processes
	  promise now matches just the command line of each process instead of
	  the line that is output by ps. This was done to reduce fragmentation
	  between platforms, since ps is a very nonstandardized tool.
	  (Jira CFE-2161)
	- Allowed namespace names made more strict, to disallow
	  namespaces that cannot be reached. (Redmine #7903)
	- Behavior change: When using readintlist(), readreallist()
	  or readstringlist(), parsing an empty file will no longer result in a
	  failed function call, but instead an empty list. Failure to open the
	  file will still result in a failed function call.
	- insert_lines is no longer implicitly matching EOF as
	  end of the region if 'select_end' pattern is not matched .
	  (Jira CFE-2263)
	- EOF is  matched as an end of the region in edit_line
	  promises only if 'select_end_match_eof' parameter is true.
	  (Jira CFE-2263)

	Bug fixes:
	- Upgrade CFEngine dependencies to the following versions:
	  - Curl     7.48.0
	  - libxml2  2.9.4
	  - LMDB     0.9.18
	  - OpenLDAP 2.4.44
	  - OpenSSL  1.0.2h
	  - PCRE     8.38
	  (Jira ENT-2720)
	- Upgrade dependencies to latest minor versions.
	  For Community / Enterprise:
	  For Enterprise:
	- Fix bug which sometimes misparses user names in ps output.
	- Fix: Problem with git not dropping privileges soon enough
	- Allow def.json up to 5MB instead of 4K.
	- It is possible to edit the same value in multiple regions
	  of one file. (Redmine #7460)
	- CFEngine on Windows no longer truncates log messages if the
	  program in question is killed halfway through.
	- Fixed a bug which caused def.json not being able to define
	  classes based on other hard classes. (Jira CFE-2333)
	- Change: Tighten Enterprise hub permissions (Jira ENT-2708)
	- Fix a regression which would sometimes cause "Permission
	  denied" errors on files inside directories with very restricted
	  permissions. (Redmine #7808)
	- Fix use-after-free in ArrayMap and HashMap (Redmine #7952)
	- Package repositories are no more hit every time package promise
	  is evaluated on SUSE.
	- Fix a bug which sometimes caused package promises to be
	  skipped with "XX Another cf-agent seems to have done this since I
	  started" messages in the log, most notably in long running cf-agent
	  runs (longer than one minute). (Redmine #7933)
	- TTY detection should be more reliable. (Redmine #7606)
	- cf-promises -p cf now produces valid cfengine code (Redmine #7956)
	- Fix ps options for FreeBSD to check processes only in current host and not in \ 
jails
	- cf-runagent now properly supports multiple -D or -s arguments
	  (Redmine #7191)
	- Fix: Work around impaired class definition from augments
	  (Jira CFE-2333)
	- Fix "No such file or directory" LMDB error on heavily loaded hosts.
	  (Jira CFE-2300)
	- Check for empty server response in RemoteDirList after decryption
	  (Redmine #7908)
	- Small performance optimization when cf-execd scans emails before sending.
	- Fix handling of closed connections during transactions
	  (Redmine #7926)
	- The core ps parsing engine used for processes promises
	  has been rewritten from scratch, and should be more robust than
	  before. (Jira CFE-2161)
	- Fix the lexer which could not handle empty newline(s)
	  before a @endif.
	- groupexists() no longer fails to detect a group name
	  starting with a digit. (Jira CFE-2351)
	- Fix HP-UX specific bug that caused a lot of log output to disappear.
	- Fix unresolved variable (Redmine #7931)
	- Change: Suppress standard services noise on SUSE (Redmine #6968)
	- Reduce verbosity of yum package module (Redmine #7485)
	- cf-runagent: Allow connections to localhost instead of failing silently.
	- Show errors regarding failure to copy extended attributes
	  when doing a local file copy. Errors could happen when copying
	  across two different mount points where the support for extended
	  attributes is different between the mount points.
	- Fix classes being set because of hash collision in the implementation.
	  (Redmine #7912)
	- fix build failure on FreeBSD 7.1 (Redmine #7415)
	- Improve logging when managing setuid/setgid
	- Reduce verbosity of apt_get package module (Redmine #7485)
	- packagesmatching() and packageupdatesmatching() should work
	  when new package promise is used. (Jira CFE-2246)
	- Fix bug which could render host unable to recover from a
	  syntax error, even if failsafe.cf was utilized. This could happen if
	  the file containing the syntax error was specified in the def.json
	  special file. (Redmine #7961)
	- Prevent crash in cf-execd email code when policy server is not set.
	- In case of networking error, assume checksum is wrong
	- Fix two cases where action_policy warn still produces errors
	  (Redmine #7274)
	- Fix bad option nlwp to vzps on Proxmox / OpenVZ. (Redmine #6961)
	- @if minimum_version now correctly ignores lines starting with '@'
	  (Redmine #7862)
	- No longer hang when changing permissions/ownership on fifos
	  (Redmine #7030)
	- readfile() and read*list() should print an error if they fail to read file.
	  (Redmine #7702)
	- The isvariable() function call now correctly accepts all
	  array variables when specified inline. Previously it would not accept
	  certain special characters, even though they could be specified
	  indirectly by using a variable to hold it. (Redmine #7088)
	- Fix file descriptor leak when there are network errors.
	- Improve robustness of process table parsing on Solaris.
	  (Jira CFE-2161)
	- Installing packages containing version numbers using yum
	  now works correctly. (Redmine #7825)
	- Parse def.json vars, classes and inputs from the C
	  code. This fixes a bug where certain entries in this file would be
	  parsed too late to have any effect on the evaluation.
	  (Redmine #7453, #7615)
	- Change package modules permissions on hub package so that
	  hub can execute package promises. (Redmine #7602)
	- Fix: CFEngine choking on standard services (Jira CFE-2086)
	- Fix: cf-upgrade on SUSE
	- Fix: Stop cfengine choking on systemctl output (Jira CFE-2806)
	- storage: Properly initialize the list of current mounts
	  (Jira CFE-1803)
	- Fix bug which caused empty emails to be sent from cf-execd
	  if there was no previous output log and the new log was fully filtered
	  by email filters. (Jira ENT-2739)
	- Don't send empty emails for logs where everything is filtered.
	  (Jira ENT-2739)
	- Fix intermittent error message of type:
	  "error: Process table lacks space for last columns: <cmd>"
	  (Jira CFE-2371)
	- Be less verbose if a network interface doesn't have a MAC address.
	  (Jira CFE-1995)

3.8.2:
	Fixes:
	- Update library dependencies to latest version.
	  Libraries upgraded:
	  - curl 7.47.0
	  - LMDB 0.9.18
	  - MySQL 5.1.72
	  - OpenLDAP 2.4.44
	  - OpenSSL 1.0.2g
	  - PostgreSQL 9.3.11
	  - Redis 3.0.7
	  - rsync 3.1.2
	  PHP was kept at 5.6.17 because of problems with the 5.6.19 version.
	- Reduce verbosity of apt_get package module (Redmine #7485)
	- Reduce verbosity of yum package module (Redmine #7485)
	- The isvariable() function call now correctly accepts all
	  array variables when specified inline. Previously it would not accept
	  certain special characters, even though they could be specified
	  indirectly by using a variable to hold it. (Redmine #7088)
	- Don't follow symbolic links when copying extended attributes.
	- Fix a bug which sometimes caused package promises to be
	  skipped with "XX Another cf-agent seems to have done this since I
	  started" messages in the log, most notably in long running cf-agent
	  runs (longer than one minute). (Redmine #7933)
	- Fix bug which could render host unable to recover from a
	  syntax error, even if failsafe.cf was utilized. This could happen if
	  the file containing the syntax error was specified in the def.json
	  special file. (Redmine #7961)
	- Change: Policy files specified in the "inputs" section of
	  def.json will no longer be auto-loaded. One has to refer to the
	  $(def.augments_inputs) variable in the policy (the standard
	  masterfiles policies include this by default). This only affects
	  installations which are not based on the standard masterfiles, and
	  which are using the "inputs" field inside def.json. (Redmine #7961)
	- Fix file descriptor leak when there are network errors.
	- Fix cf-serverd error messages with classic protocol clients
	  (Redmine #7818)
	- Installing packages containing version numbers using yum
	  now works correctly. (Redmine #7825)
	- Fix ps options for FreeBSD to check processes only in current host and not in \ 
jails
	- fix build failure on FreeBSD 7.1 (Redmine #7415)
	- Show errors regarding failure to copy extended attributes
	  when doing a local file copy. Errors could happen when copying
	  across two different mount points where the support for extended
	  attributes is different between the mount points.
	- Fix classes being set because of hash collision in the implementation.
	  (Redmine #7912)
	- Allow def.json up to 5MB instead of 4K.
	- Fix a regression which would sometimes cause "Permission
	  denied" errors on files inside directories with very restricted
	  permissions. (Redmine #7808)
	- Change: Suppress standard services noise on SUSE (Redmine #6968)

	Changes:
	- Change: classesmatching(): order of classes changed

3.8.1:
	Changes:
	- Upgrade CFEngine dependencies to the following versions:
	  - OpenSSL   1.0.2e
	  - PCRE      8.38
	  - libxml2   2.9.3
	  - OpenLDAP  2.4.43
	  - libcurl   7.46.0
	- Upgrade LMDB to version 0.9.17. (Redmine #7879)

	Bug fixes:
	- @if minimum_version now correctly ignores lines starting with '@'
	  (Redmine #7862)
	- Add guard for binary upgrade during bootstrap (Redmine #7861)
	- Namespaced classes can now be specified on the command line.
	- Fix bad option nlwp to vzps on Proxmox / OpenVZ. (Redmine #6961)
	- Fix two cases where action_policy warn still produces errors
	  (Redmine #7274)
	- Parse def.json vars, classes and inputs from the C
	  code. This fixes a bug where certain entries in this file would be
	  parsed too late to have any effect on the evaluation.
	  (Redmine #7453, #7615)
	- Fix HP-UX specific bug that caused a lot of log output to disappear.
	- Check for empty server response in RemoteDirList after decryption
	  (Redmine #7908)
	- getvalues() will now return a list also for data containers,
	  and will descend recursively into the containers. (Redmine #7116)
	- Define (bootstrap|failsafe)_mode during update.cf when triggerd from failsafe.cf
	  (Redmine #7861)

3.8.0:
	New features/additions:
	- New feature: Bodies can now inherit attribute values from
	  other bodies by specifying "inherit_from" with the name of the body to
	  inherit from, plus any arguments it accepts. For example:
	    body classes myclasses
	    {
		inherit_from => classes_generic("myname");
	    }
	    (Redmine #4309)
	- Add url_get() function. (Redmine #6480)
	- Add @if feature() syntax
	  @if feature work like @if minimum_version but allows distinguishing
	  between features chosen at compile time.
	- Extend module protocol to create persistent classes.
	  To use it, have the module print a line with \ 
"^persistence=<minutes>"
	  before printing any class names. "persistence=0" goes back to non-
	  persistent classes. (Redmine #7302)
	- Add: New results classes body (Redmine #7418)
	- Add: Debug reports in cfe_internal_cleanup_agent_reports
	- Add: Path to svcprop in stdlib
	- Add: masterfiles-stage script to contrib
	- Whitespace is now allowed in class expressions for
	  readability, between class names and operators. (Redmine #7152)

	Changes:
	- Change: Clarify bootstrap/failsafe reports
	- Change: Improve in-line docs for internal log maintenance
	- Change: Improve efficiency and debug reports (Redmine #7527)
	- Remove: 3.5 support from masterfiles policy framework
	- Long promiser strings with multiple lines are now
	  abbreviated in logs. (Redmine #3964)
	- Change: Reunify Version based policy split
	- Change: Separate binary details from policy update (Redmine #7662)
	- Remove /var/cfengine/cf3.<host>.runlog. (Redmine #6957)
	- Change: sys.libdir and sys.local_libdir to non version specific path
	    - sys.libdir now resolves to $(sys.inputdir)/lib
	    - sys.local_libdir now resolves to lib (Redmine #7559)
	- Moved the following files to /var/cfengine/log/:
	    - /var/cfengine/promise_summary.log
	    - /var/cfengine/cfagent.<host>.log
	- Change: Separate binary details from policy update (Redmine #7662)
	- Remove: Support for email settings from augments_file (Redmine #7682)

	Bug fixes:
	- It is possible to edit the same value in multiple regions
	  of one file. (Redmine #7460)
	- Change package modules permissions on hub package so that
	  hub can execute package promises. (Rednime #7602) (Redmine #7602)
	- Fix exporting CSV reports through HTTPS. (Redmine #7267)
	- cf-agent, cf-execd, cf-promises, cf-runagent and cf-serverd honor
	  multiple -D, -N and -s arguments (Redmine #7191)
	- readfile() and read*list() should print an error if they fail to read file.
	  (Redmine #7702)
	- No longer hang when changing permissions/ownership on fifos
	  (Redmine #7030)
	- Fix broken HA policy for 3rd disaster-recovery node.
	- Fix: Policy errors for 3.5 and 3.6
	- Mustache templates: Fix {{@}} key when value is not a
	  primitive. The old behavior, when iterating across a map or array of
	  maps, was to abort if the key was requested with {{@}}. The new
	  behavior is to always replace {{@}} with either the key name or the
	  iteration position in the array. An error is printed if {{@}} is used
	  outside of a Mustache iteration section.
	- Fix build with musl libc. (Redmine #7455)
	- Fixed a bug which could cause daemons to not to be killed
	  correctly when upgrading or manually running "service cfengine3 stop".
	  (Redmine #7193)
	- Fix daemons not restarting correctly on upgrade on AIX.
	- Package promise: Fix inability to install certain packages
	  with numbers. (Redmine #7421)
	- Redmine #6027 Directories should no more be changed randomly
	  into files. (Redmine #6027)
	- Improve cf-serverd's lock contention because of getpwnam()
		     call. (Redmine #7643) (Redmine #7643)
	- action_policy "warn" now correctly produces warnings instead
	  of various other verbosity levels. (Redmine #7274)
	- If there is an error saving a mustache template file
	  it is now logged with log-level error (was inform).
	- The JSON parser now supports unquoted strings as keys.
	- Reduce malloc() thread contention on heavily loaded
	  cf-serverd, by not exiting early in the logging function, if no message
	  is to be printed. (Redmine #7624) (Redmine #7624)
	- Fix a bug which caused daemons not to be restarted on
	  upgrade. (Redmine #7528)
	- Include latest security updates for dependencies.
	- Fixed bug which would cause bff and depot packages not to
	  run package scripts on removal. (Redmine #7193)
	- Fix upgrade causing error message under systemd because of open ports.
	- Fixed several bugs which prevented CFEngine from loading
	  libraries from the correct location. This affected several platforms.
	  (Redmine #6708)
	- Legacy package promise: Result classes are now defined if
	  the package being promised is already up to date. (Redmine #7399)
	- failsafe.cf will be created when needed. (Redmine #7634)
	  (Redmine #7634)
	- If file_select.file_types is set to symlink and there
	  are regular files in the scanned directory, CFEngine no longer
	  produces an unnecessary error message. (Redmine #6996)
	- Fix 'AIX_PREINSTALL_ALREADY_DONE.txt: cannot create' error
	  message on AIX.
	- Fix package promise not removing dependent packages. (Redmine #7424)
	- Fix: Solaris packages no longer contain duplicate library
	  files, but instead symlinks to them. (Redmine #7591)
	- Fix select_class not setting class when used in common bundle with slist.
	  (Redmine #7482)
	- Fix "@endif" keyword sometimes being improperly processed
	  by policy parser. (Redmine #7413)
	- Fix noise from internal policy to upgrade windows agents
	  (Redmine #7456)
	- cfruncommand now works if it contains spaces, with the TLS protocol.
	  (Redmine #7405)
	- Fix warning "Failed to parse csv file entry" with certain very long
	  commands promises. (Redmine #7400)
	- CFEngine no longer erronously passes -M to useradd on HP-UX. (Redmine #6734)
	- cf-monitord no longer complains about missing thermal zone files.
	  (Redmine #7238)
	- systemd is now detected correctly if it is a symlink (Redmine #7297)
	- TTY detection should be more reliable. (Redmine #7606)
	  (Redmine #7606)

Log message:
sysutils: Mark packages that fail with OpenSSL 1.1 BROKEN

Log message:
*: Recursive revision bump for openssl 1.1.1.

Log message:
sysutils: align variable assignments

pkglint -Wall -F --only aligned --only indent -r

Manually excluded consolekit and dc-tools since pkglint didn't get the
formatting correct.

Log message:
Follow HTTP redirect in HOMEPAGE.