Next | Query returned 33 messages, browsing 21 to 30 | Previous

History of commit frequency

CVS Commit History:


   2017-09-08 10:19:30 by Thomas Klausner | Files touched by this commit (2) | Package updated
Log message:
Updated xf86-video-amdgpu to 1.4.0.

I'm pleased to announce the 1.4.0 release of xf86-video-amdgpu, the Xorg
driver for AMD Radeon GPUs supported by the amdgpu kernel driver.
This release supports xserver versions 1.13-1.19.

Highlights:

* Clients can now use DRI page flipping even while TearFree is enabled
  for any CRTC. This should improve performance of such clients
  (including compositing managers) while TearFree is enabled, and avoid
  other issues such as tearing on other CRTCs where TearFree isn't
  enabled.
* The driver now takes measures to prevent other DRM master processes
  (potentially from other local users) from accessing buffers created by
  this driver while switched away to a different VT. Other DRM master
  processes should only be able to access a single buffer anymore, which
  contains only all-black pixels.
* The gamma ramp is now applied to the HW cursor as well, so the HW
  cursor doesn't look odd when e.g. using Redshift or similar tools.

Plus other improvements and fixes. Thanks to everybody who contributed
to this release in any way!

Adam Jackson (1):
      modesetting: Validate the atom for enum properties

Daniel Stone (1):
      Set correct DRM event context version

Eric Anholt (1):
      Use plain glamor_egl_create_textured_screen().

Martin Peres (1):
      modesetting: re-set the crtc's mode when link-status goes BAD

Michel Dänzer (45):
      Post-release version bump
      manpage: Don't put "'" at the beginning of a line
      Don't set modes before AMDGPUWindowExposures_oneshot is called
      Apply gamma correction to HW cursor
      Remove unused struct members from drmmode_display.h
      Don't enable DRI3 without glamor
      Simplify tracking of PRIME scanout pixmap
      Update URLs
      Use reference counting for tracking KMS framebuffer lifetimes
      Improve AMDGPUPreInitAccel_KMS log messages
      Increase reference count of FB assigned to drmmode_crtc->flip_pending
      Improve drmmode_fb_reference debugging code
      Only call drmmode_scanout_free for non-GPU screens in LeaveVT
      Use drmmode_crtc->scanout_id instead of 0 to check for scanout buffer
      If a TearFree flip fails, fall back to non-TearFree operation
      Add AC_CONFIG_MACRO_DIRS([m4]) to configure.ac
      Makefile.am: Set ACLOCAL_AMFLAGS = -I m4
      autogen.sh: Pass -f to autoreconf
      Only handle reflection in the driver with Xorg < 1.16
      Use root window (pixmap) instead of screen pixmap for scanout updates
      Add drmmode_crtc_can_flip helper
      Allow DRI page flipping when some CRTCs use separate scanout buffers
      Adapt to PixmapDirtyUpdateRec::src being a DrawablePtr
      Remove drmmode_crtc->scanout_destroy[] array
      Pass reference CRTC to amdgpu_do_pageflip directly
      Create drmmode_wait_vblank helper
      Create drmmode_crtc_wait_pending_event helper macro
      Wait for pending flips synchronously before turning off a CRTC
      Handle multiple "pending" Present flips
      Add source drawable parameter to amdgpu_scanout_do_update
      Pass extents to amdgpu_scanout_do_update
      Always allow Present page flipping with TearFree
      Always allow DRI2 page flipping with TearFree
      Consolidate amdgpu_scanout_flip_abort/handler helpers
      Use xorg_list_append for the DRM event list
      Make amdgpu_scanout_do_update take a PixmapPtr instead of a DrawablePtr
      Create amdgpu_pixmap_clear helper
      Create drmmode_set_mode helper
      Create amdgpu_pixmap_get_fb_ptr helper
      Create amdgpu_master_screen helper
      Make all active CRTCs scan out an all-black framebuffer in LeaveVT
      Remove drmmode_scanout_free
      Use a timer for unreferencing the all-black FB
      Require xserver >= 1.13
      Bump version for 1.4.0 release

Nicholas Molloy (1):
      Fix a misspelling of 'acceleration' in amdgpu_kms.c
   2017-03-16 13:07:03 by Thomas Klausner | Files touched by this commit (2) | Package updated
Log message:
Updated xf86-video-amdgpu to 1.3.0.

I'm pleased to announce the 1.3.0 release of xf86-video-amdgpu, the Xorg
driver for AMD Radeon GPUs supported by the amdgpu kernel driver.
This release supports xserver versions 1.10-1.19.

Highlights:

* Allow TearFree to be toggled at runtime via an RandR output property
  "TearFree". The xorg.conf option "TearFree" now controls \ 
the default
  value of the output properties.
* Use libdrm_amdgpu functionality to determine the GPU marketing name,
  remove corresponding tables from this driver.
* Use DRM render nodes for DRI3 clients when available.

Plus many other improvements and fixes. Thanks to everybody who
contributed to this release in any way!

Emil Velikov (1):
      autogen.sh: use quoted string variables

Hans De Goede (1):
      amdgpu_probe: Do not close server managed drm fds

Jammy Zhou (1):
      Use render node for DRI3 if available

Michel Dänzer (44):
      Post-release version bump
      Move struct amdgpu_gpu_info out of amdgpu_get_tile_config
      Use family information from libdrm_amdgpu / kernel
      Stop using generated amdgpu_device_match
      Remove amdpciids.h
      Stop using AMDGPUPciChipsets
      Stop using AMDGPU(Unique)Chipsets
      Remove generated header files
      Use DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE/RELATIVE flags when available
      Make libdrm >= 2.4.72 requirement explicit
      Don't install Flush/EventCallback for GPU screens
      Add amdgpu_is_gpu_screen helper
      Take current scanout_id into account everywhere involved with TearFree
      Fix amdgpu_scanout_extents_intersect for GPU screens
      Call ValidateGC after ChangeClip in amdgpu_sync_scanout_pixmaps
      Call amdgpu_drm_abort_entry on failure to flip to a scanout pixmap
      Simplify drmmode_handle_uevents
      Pass pitch from drmmode_crtc_scanout_allocate to drmmode_create_bo_pixmap
      Call drmmode_crtc_scanout_create in drmmode_crtc_shadow_allocate as well
      Fold drmmode_crtc_scanout_allocate into drmmode_crtc_scanout_create
      Handle rotation in the driver also with Xorg 1.12-1.18
      Fix flip event data leak if calloc or drmModeAddFB fails
      Don't destroy current FB if drmModeAddFB fails
      Factor out amdgpu_prime_dirty_to_crtc helper
      Factor out drmmode_crtc_scanout_update helper
      Allow toggling TearFree at runtime via output property
      Use drmmode_crtc_scanout_free in drmmode_fini
      present: Only call drmModeRmFB after setting modes for unflip
      present: Wait for GPU idle before setting modes for unflip
      present: Also flush before using a flip to unflip
      present: Use async flip for unflip if possible
      present: Flush before flipping
      Call drmmode_set_desired_modes from a WindowExposures hook
      Move DPMS check from amdgpu_scanout_do_update to amdgpu_scanout_flip
      Don't call amdgpu_glamor_flush in drmmode_copy_fb
      Don't use pScrn->is_gpu in AMDGPUCreateScreenResources_KMS
      Use local implementation of RegionDuplicate for older xserver
      Only define transform_region for XF86_CRTC_VERSION >= 4
      glamor: Don't flush in BlockHandler with Xorg >= 1.19
      Refactor amdgpu_kernel_close_fd helper
      glamor: Use glamor_finish when available
      Skip some initialization steps for GPU screens
      Pass TRUE to drmmode_set_desired_modes the first time for GPU screens
      Bump version for 1.3.0 release

Mihail Konev (1):
      autogen: add default patch prefix

Peter Hutterer (1):
      autogen.sh: use exec instead of waiting for configure to finish

jimqu (1):
      udev_monitor_receive_device() will block when hotplug monitor
   2016-11-17 22:00:05 by Thomas Klausner | Files touched by this commit (3) | Package updated
Log message:
Updated xf86-video-amdgpu to 1.2.0.

I'm pleased to announce the 1.2.0 release of xf86-video-amdgpu, the Xorg
driver for AMD Radeon GPUs supported by the amdgpu kernel driver.
This release supports xserver versions 1.10-1.19.

Highlights:

* Significant 2D compositing performance increase.
* Option "TearFree" can now prevent tearing in all possible display
  configurations (with current versions of Xorg). Specifically, it's
  now also effective with arbitrary RandR transforms and with RandR 1.4
  slave output.
* DRI3 is now enabled by default if the Xorg version is >= 1.18.3 and
  glamor is enabled.
* DRI3/Present asynchronous page flips are now supported (requires
  corresponding kernel driver support, available in current versions of
  the Linux kernel). This can increase performance of fullscreen
  applications with sync-to-vblank disabled.
* The HW cursor can now be used with RandR 1.4 slave output or with
  TearFree & rotation.
* Performance improvements with RandR 1.4 slave output.
* The list of supported GPUs in the Xorg log file has been tidied up.
* RandR 1.4 provider capabilities are now advertised more accurately.
* Support for SI family GPUs.

Plus many other improvements and fixes. Thanks to everybody who
contributed to this release in any way!

Adam Jackson (1):
      Adapt Block/WakeupHandler signature for ABI 23

Alex Deucher (1):
      add missing bonaire pci id

Flora Cui (3):
      add strato pci id
      Add more Polaris 10 PCI IDs
      Add more Polaris 11 PCI IDs

Hans de Goede (3):
      Remove unnecessary fb addition from drmmode_xf86crtc_resize
      Only add main fb if necessary
      PRIME: Fix swapping of provider sink / source capabilities

Keith Packard (1):
      Use NotifyFd for drm fd

Marek Olšák (1):
      Fix cursor size for SI

Michel Dänzer (65):
      Post 1.1.0 release version bump
      Add support for async flips to radeon_do_pageflip
      present: Support async flips
      Enable DRI3 by default when building for Xorg >= 1.18.3
      Handle Zaphod mode correctly in amdgpu_mode_hotplug
      glamor: Fix amdgpu_glamor_share_pixmap_backing for priv->bo == NULL
      Remove amdgpu_share_pixmap_backing
      Add amdgpu_pixmap_get_tiling_info
      Consolidate get_drawable_pixmap helper
      Move DRI2's local fixup_glamor helper to amdgpu_glamor_set_pixmap_bo v2
      glamor: Reallocate linear pixmap BO if necessary for DRI2 PRIME
      glamor: Make amdgpu_glamor_create_textured_pixmap take amdgpu_buffer*
      Propagate failure from amdgpu_set_pixmap_bo
      Use amdgpu_set_pixmap_bo in amdgpu_set_shared_pixmap_backing
      glamor: Fix leak of pixmap private when replacing BO
      Free priv in amdgpu_set_pixmap_bo also if priv->bo == NULL
      Adapt to XF86_CRTC_VERSION 7
      Call amdgpu_glamor_create_screen_resources after ModifyPixmapHeader
      Simplify drmmode_set_mode_major error handling
      Make sure drmmode_crtc->scanout[] are destroyed when not needed
      present: Don't allow flipping when using a dedicated scanout buffer
      dri2: Don't allow flipping when using a dedicated scanout buffer
      present: Separate checks for flips vs unflips v2
      Remove drmmode_load_palette
      Destroy all dedicated scanout buffers during CloseScreen
      Make the dedicated scanout mechanism work with arbitrary transforms v2
      Remove w/h parameters from amdgpu_scanout_extents_intersect
      Clear damage in amdgpu_scanout_update if it doesn't intersect the CRTC
      Add .editorconfig file
      Only use RandR APIs if RandR is enabled
      DRI2: Add interpolated_vblanks in amdgpu_dri2_get_crtc_msc
      Remove unused lut_r/g/b arrays from drmmode_crtc_private_rec
      Add Mullins PCI IDs
      Add missing Kaveri PCI ID (1318)
      Only list each unique chipset family once in the log file
      Add explicit AMDGPU_DRM_QUEUE_ERROR define
      Use EventCallback to avoid flushing every time in the FlushCallback
      Keep track of damage event related flushes per-client
      Wait for pending flips to complete before turning off an output or CRTC
      Use drmmode_crtc_scanout_* helpers for RandR 1.4 scanout pixmaps
      Handle RandR 1.4 slave dirty updates via amdgpu_drm_queue
      Track damage accurately for RandR 1.4 slave scanout
      Only copy from screen pixmap to shared pixmap on demand for slave scanout
      Factor out transform_region helper
      Move up amdgpu_scanout_extents_intersect
      Synchronize scanout pixmaps for TearFree
      Make TearFree effective with PRIME slave scanout
      Use --with-xorg-conf-dir=$prefix/share/X11/xorg.conf.d by default
      Fix handling of configure option --with-xorg-conf-dir
      Untangle HAS_XORG_CONF_DIR / --with-xorg-conf-dir lines in configure.ac
      Add support for ScreenPtr::SyncSharedPixmap
      Rotate and reflect cursor hotspot position for drmModeSetCursor2
      Enable HW cursor support with PRIME slave output & Xorg > 1.18.99.901
      Order unique chipsets according to first appearance in ati_pciids.csv
      Sayōnara, AM_MAINTAINER_MODE!
      Don't rely on randr_crtc->scanout_pixmap in drmmode_set_scanout_pixmap
      Always call PixmapStopDirtyTracking in drmmode_set_scanout_pixmap
      Consume all available udev events at once
      present: Check tiling info for flips
      Require xserver 1.10 or newer
      Check Xorg version at runtime instead of build time in two places
      Refactor amdgpu_mode_hotplug
      Use pAMDGPUEnt to find both screens of a GPU in amdgpu_mode_hotplug
      manpage updates for the 1.2.0 release
      Bump version for 1.2.0 release

Qiang Yu (3):
      Remove RR_Capability_SinkOutput for GPU without CRTC.
      Fix amdgpu_mode_hotplug crash on multi GPU platform.
      DRI2: Fix amdgpu_dri2_exchange_buffers width/height copy'n'paste error

Ronie Salgado (1):
      Add SI PCI IDs

Tom St Denis (1):
      dri3: Return NULL from amdgpu_dri3_pixmap_from_fd if calloc fails.
   2016-11-16 23:19:16 by Thomas Klausner | Files touched by this commit (2)
Log message:
Fix build with xorg-server-1.19.
   2016-10-08 12:34:18 by Ryo ONODERA | Files touched by this commit (1)
Log message:
This requires libdrm_amdgpu.so from x11/libdrm. Fix build
   2016-09-16 12:35:38 by Thomas Klausner | Files touched by this commit (3)
Log message:
Updated xf86-video-amdgpu to 1.1.2.

This is the 1.1.2 release of xf86-video-amdgpu, the Xorg
driver for AMD Radeon GPUs supported by the amdgpu kernel driver.

The only change in this release is a fix for issues with the configure
option --with-xorg-conf-dir which slipped into the 1.1.1 release.
Everybody is advised to use this release in favour of 1.1.1.

Michel Dänzer (2):
      Fix handling of configure option --with-xorg-conf-dir
      Bump version for 1.1.2 release
   2016-09-15 15:36:56 by Thomas Klausner | Files touched by this commit (3)
Log message:
Updated xf86-video-amdgpu to 1.1.1.

I'm pleased to announce the 1.1.1 release of xf86-video-amdgpu, the Xorg
driver for AMD Radeon GPUs supported by the amdgpu kernel driver.
This release supports xserver versions 1.9-1.18.

This is a stable point release containing only fixes and other minor changes.

Highlights:

* Support for all currently available GPUs supported by the amdgpu
  kernel driver.
* A few fixes for crash/hang bugs.

Thanks to everybody who contributed to this release in any way!

Alex Deucher (1):
      add missing bonaire pci id

Flora Cui (3):
      add strato pci id
      Add more Polaris 10 PCI IDs
      Add more Polaris 11 PCI IDs

Marek Olšák (1):
      Fix cursor size for SI

Michel Dänzer (14):
      Handle Zaphod mode correctly in amdgpu_mode_hotplug
      glamor: Fix amdgpu_glamor_share_pixmap_backing for priv->bo == NULL
      Remove amdgpu_share_pixmap_backing
      Add amdgpu_pixmap_get_tiling_info
      Consolidate get_drawable_pixmap helper
      Move DRI2's local fixup_glamor helper to amdgpu_glamor_set_pixmap_bo v2
      glamor: Reallocate linear pixmap BO if necessary for DRI2 PRIME
      Destroy all dedicated scanout buffers during CloseScreen
      Only use RandR APIs if RandR is enabled
      DRI2: Add interpolated_vblanks in amdgpu_dri2_get_crtc_msc
      Add Mullins PCI IDs
      Add missing Kaveri PCI ID (1318)
      Use --with-xorg-conf-dir=$prefix/share/X11/xorg.conf.d by default
      Bump version for the 1.1.1 release

Qiang Yu (3):
      Remove RR_Capability_SinkOutput for GPU without CRTC.
      Fix amdgpu_mode_hotplug crash on multi GPU platform.
      DRI2: Fix amdgpu_dri2_exchange_buffers width/height copy'n'paste error

Ronie Salgado (1):
      Add SI PCI IDs
   2016-04-13 20:47:46 by Thomas Klausner | Files touched by this commit (2)
Log message:
Update xf86-video-amdgpu to 1.1.0

I'm pleased to announce the 1.1.0 release of xf86-video-amdgpu, the Xorg
driver for AMD Radeon GPUs supported by the amdgpu kernel driver.
This release supports xserver versions 1.9-1.18.

Highlights:

* Support for the upcoming Polaris family of GPUs.
* Option "TearFree" can now prevent tearing with rotation/reflection as
  well (with Xorg >= 1.16).
* RandR CRTC transforms now work correctly (but for now still exhibit
  tearing even with TearFree).
* The RandR 1.4 provider name is now no longer hardcoded to "amdgpu"
  but constructed from the GPU chipset name and bus ID, allowing
  several GPUs supported by this driver to be distinguished by name.
* The RandR primary output is now always explicitly marked as such.
* The driver can prevent clients trying to use the DRI3 extension over a
  display connection forwarded via SSH from hanging.
* VDPAU/OpenGL interoperation can now work with DRI3 enabled.
* Many more fixes for issues using the DRI3/Present extensions.

Plus many other small improvements and fixes. Thanks to everybody who
contributed to this release in any way!
   2016-02-26 12:27:22 by Jonathan Perkin | Files touched by this commit (98)
Log message:
Use OPSYSVARS.
   2016-02-19 10:58:48 by Thomas Klausner | Files touched by this commit (2)
Log message:
Update xf86-video-amdgpu to 1.0.1.

I'm pleased to announce the release of version 1.0.1 of xf86-video-amdgpu,
the Xorg driver for AMD GPUs using the amdgpu kernel driver.

This is a pure bugfix release with the main purpose of fixing a bug
which would prevent the driver from initializing successfully with
glamor enabled on top of the upcoming Mesa 11.2 release.

Michel Dänzer (6):
      sync: Check if miSyncShmScreenInit symbol is resolved at runtime
      Only map front buffer if glamor acceleration is disabled (v2)
      Don't advertise any PRIME offloading capabilities without acceleration
      Load fb module before glamoregl/shadow modules
      HAS_DIRTYTRACKING_ROTATION also supports multiple CRTCs
      Bump version for 1.0.1 release

Mykola Lysenko (2):
      Check for NULL koutput in drmmode_output_dpms
      Initialize drmmode_crtc dpms_mode to DPMSModeOff

Next | Query returned 33 messages, browsing 21 to 30 | Previous