Log message:
Reset maintainer, sketch resigned.

Log message:
Changes 2.50:
* fixed rt.cpan.org 63487 documentation error.
* fixed rt.cpan.org 61302, now croak if the config file parameter is
  a directory and directory include is not turned on.
* fixed rt.cpan.org 60429 META.yml typo
* added new option -AllowSingleQuoteInterpolation, which turns on interpolation
  for variables inside single quotes.
* added test case for the new option

Log message:
Updating devel/p5-Config-General from 2.48 to 2.49

Upstream changes:
 2.49
	- fixed rt.cpan.org#56532, '#' missed during fix for
	  56370 in 2.45.

	- added test case for this too

Log message:
Bump the PKGREVISION for all packages which depend directly on perl,
to trigger/signal a rebuild for the transition 5.10.1 -> 5.12.1.

The list of packages is computed by finding all packages which end
up having either of PERL5_USE_PACKLIST, BUILDLINK_API_DEPENDS.perl,
or PERL5_PACKLIST defined in their make setup (tested via
"make show-vars VARNAMES=..."), minus the packages updated after
the perl package update.

sno@ was right after all, obache@ kindly asked and he@ led the
way. Thanks!

Log message:
Update p5-Config-General from version 2.44 to version 2.48.

Approved by MAINTAINER.

Upstream changes:
 2.48
	- arg, uploaded the wrong file to pause, so another version
	  bump up.
	- fixed typos in pod section for -ForceArray.

 2.47
	- fixed rt.cpan.org#53759 by adding new option -ForceArray.
	  when enabled a single config value enclosed in [] will become
	  an array forcefully.
	- fixed typo in license: it is "artistic", not "artificial".

 2.46
	- fixed rt.cpan.org#56370: there was a sort() call in _store()
	  left, which lead to sorted arrays even if -SaveSorted were
	  turned off.

 2.45
	- fixed rt.cpan.org#50647 escaping bug. Now escaped $ or
	  backslash characters are handled correctly (across save too)
	- fixed rt.cpan.org#52047, tied hash will remain tied
	  when savong to a file.
	- fixed rt.cpan.org#54580, preserve single quotes during
	  variable interpolation corrected. No more using rand()
	  to mark single quotes but an incrementor instead.
	- fixed rt.cpan.org#42721+54583, empty config values will no
	  more handed over to interpreting methods (as interpolate
	  or autotrue and the like) but returned as undef untouched.

Log message:
Updating devel/p5-Config-General from 2.43 to 2.44

Upstream changes:
2.44
	- fixed rt.cpan.org#49023 by rolling back change in 2.43
	   in line 158, regarding GLOB support.

Log message:
pkgsrc changes:
  - Updating package for p5 module Config::General from 2.42 to 2.43
  - Adding perl license as license (from module POD)

Upstream changes:
2.43
	- fixed rt.cpan.org#40925, $indichar replaced by internal
	  configuration variable EOFseparator, which contains
	  a 256 bit SHA checksum of the date I fixed the bug.
	  This will prevent future conflicts hopefully. In addition
	  it makes it possible to make it customizable, if neccessary,
	  in a future release.

	- fixed rt.cpan.org#42721, return undef for empty values

	- fixed rt.cpan.org#42331, return undef for empty objects

	- fixed rt.cpan.org#44600, comments after blockname
	  causes parser failure.

	- fixed rt.cpan.org#42287, whitespace at beginning or end
	  of a quoted value gets lost after save().

	- fixed rt.cpan.org#46184, variables that were not previously
	  defined are deleted when -InterPolateEnv is enabled.

	- fixed bug in config loader for FileHandle objects, it
	  supports now any compatible object. Hint by Ingo Schmiegel.

	- applied spelling- and speedup patches by Ville Skytt"a.

	- applied documentation patch by Jordan Macdonald.

Log message:
Update to 2.42:

 2.42
	- dist tarball for 2.41 missed t/Tie/LxHash.pm. Dammit.
          the File to the MANIFEST.

 2.41
	- fixed rt.cpan.org#38635. apache-like include now supports
	  quoted strings.

        - fixed rt.cpan.org#41748. saving config with -tie enabled
	  now keeps the tie as documented.

	- added unit test for -tie. For this to work, a copy of
	  Tie::LxHash module is delivered with Config::General
	  source, but will not installed, in fact, it is only
	  used for 'make test' (number 50)

	- fixed rt.cpan.org#39159. documentation of functional interface
          now reflects that qw$method) is now required.

	- applied patch by AlexK fixing rt.cpan.org#41030:
	  if files are included by means of a glob pattern having the -IncludeGlob
	  option activated, paths specified by the -ConfigPath option are being
	  neglected when trying to spot the files. This patch fixes this

	- applied patch by fbicknel, fixes rt.cpan.org#41570:
	  An array of scalars (eg: option = [1,2,3]) cannot
	  be used for interpolation (which element shall we use?!), so
	  we ignore those types of lists and don't build a __stack for them.

Log message:
Bump the PKGREVISION for all packages which depend directly on perl,
to trigger/signal a rebuild for the transition 5.8.8 -> 5.10.0.

The list of packages is computed by finding all packages which end
up having either of PERL5_USE_PACKLIST, BUILDLINK_API_DEPENDS.perl,
or PERL5_PACKLIST defined in their make setup (tested via
"make show-vars VARNAMES=...").

Log message:
Updated devel/p5-Config-General to 2.40

2.40
	- fixed SplitDelimiter parser regex, it does no more consider
	  non-whitespaces (\S+?) as the option name but anything
	  before the delimiter (.+?), this fixes bug rt.cpan.org#36607,
	  the fix of 2.39 were not sufficient. Thanks to
	  Jeffrey Ratcliffe for pointing it out.

	- added new parameter -SaveSorted. The default value is 0,
	  that means configs will be saved unsorted (as always),
	  however if you want to save it sorted, turn this parameter
	  to 1. Thanks to Herbert Breunung for the hint.

	- added complexity test, which checks a combination
	  of various complex features of the parser.

 2.39
	- fixed rt.cpan.org#35122. This one was one of the most
	  intriguing bugs I've ever observed in my own code. The
	  internal temporary __stack hashref were copied from one
	  subhash to another to enable inheritance of variables.
	  However, the hashes were copied by reference, so once a
	  value changed later, that value were overwritten because
	  the __stack in question were just a reference. I introduced
	  a simple function _copy() which copies the contents of
	  the __stack by value, which solved the bug.
	  Conclusion: beware of perl hash refs!

	- fixed rt.cpan.org#36607, accept whitespaces in heredoc
	  names if split delimiter is gues (equalsign or whitespace)

	- fixed rt.cpan.org#34080 (typo)

	- fixed rt.cpan.org#35766. Variables inside single quoted
	  strings will no more interpolated (as the docu states).
	  Also added test case for this.

	- fixed bug rt.cpan.org#33766. Checking for defined not true
	  in ::Extended::AUTOLOAD().

	- added -UTF8 flag, which opens files in utf8 mode
	  (suggested by KAORU, rt.cpan.org#35583)
	  I decided not to add a test case for this, since perls
	  utf8 support is not stable with all versions.

 2.38
	- fixed rt.cpan.org#31529 variable inheritance failed
	  with multiple named blocks.

	- fixed rt.cpan.org#33447, regex to catch variable
	  names were too strict, now - . + or : are allowed too.

	- fixed rt.cpan.org#33385 and #32978 - using arrayrefs
	  as param to -String didn't work anymore (sic)

	- fixed rt.cpan.org#33216 - variable stack were not properly
	  re-constructed for pre-existing variables if
	  -MergeDuplicateOptions is turned on.

 2.37
	- "fixed" rt.cpan.org#30199 - check for invalid and
	  unsupported structures, especially mixing blocks
	  and scalars with identical names.

	- added checks to 'make test' to test for the above
	  checks.

	- revoked patch of rt.cpan.org#27225, it broke running
	  code.

	- fixed rt.cpan.org#30063 (and #27225!) by reimplementing
	  the whole interpolation code. The internal stack is
	  no more a class variable of the module but stored
	  directly within the generated config hash and cleaned
	  before returning to the user.

	- added (modified) patch rt.cpan.org#30063 to check
	  if interpolation works with supplied default config
	  works.

 2.36
	- oh my goodness! For some unknown reason I deleted the
	  Makefile.PL before packaging. Dammit. So, here it is
	  again.

 2.35
	- 'make test' failed under perl 5.5 because some prequisite
	  modules were not found. So now I added all requirements
	  to Makefile.PL, even if those modules are part of
	  recent perls (beginning with 5.6). I could have also
	  added a 'use 5.6' to the code but this would users
	  of perl5 exclude. This way they have the possibility
	  to fix their installation. Hopefully.

	  No code changes otherwise.

 2.34
        - fixed rt.cpan.org#27271 - removed output file from
          manifest.

	- fixed rt.cpan.org#27225 - clear vars off the stack
          if entering a new block, so old vars get not re-used.

	- fixed rt.cpan.org#27110 - re-implemented support
          for arrayref as -String parameter.

	- fixed rt.cpan.org#24155 - relative include bug fixed.

	- applied patch by GWYN, (see fixed rt.cpan.org#27622)
 	  which allows the same file included multiple times.
	  there is no loop detection if turned on. new option
	  introduced: -IncludeAgain => 1 (default turned off).

	- added support for -IncludeAgain to directory include
	  code too.

	- the directory globbing code used slashes to join
	  directory and file names. changed this to use catfile()
	  instead.

 2.33
	- fixed rt.cpan.org#26333 - just return $con if env var
	  is undefined.

	- applied part of a patch supplied by Vincent Rivellino <vince@cuz.cx>
	  which turns off explicit empty block support if in
	  apache compatibility mode, see next.

	- added new option -ApacheCompatible, which makes the
	  module behave really apache compatible by setting the
	  required options.

	- a little bit re-organized the code, most of the stuff
	  in new() is now outsourced into several extra subs to
	  make maintenance of the code easier. The old new() sub
	  in fact was a nightmare.

	- fixed a bug reported by Otto Hirr <otto.hirr@olabinc.com>:
	  the _store() sub used sort() to sort the keys, which conflicts
	  with sorted hashes (eg. tied using Tie::IxHash).

	- fixed tie bug reported by King, Jason <kingj@newsltd.com.au>,
	  loading of the tie module didn't work.