Log message:
Bump all packages for perl-5.18, that
a) refer 'perl' in their Makefile, or
b) have a directory name of p5-*, or
c) have any dependency on any p5-* package

Like last time, where this caused no complaints.

Log message:
Drop PKG_DESTDIR_SUPPORT setting, "user-destdir" is default these days.

Log message:
Bump all packages that use perl, or depend on a p5-* package, or
are called p5-*.

I hope that's all of them.

Log message:
Update p5-Locale-Codes to 3.20.

Changes from previous:
----------------------
VERSION 3.20  (2011−12−01)
   NEW CODE(s)

   Added limited support for deprecated codes
       The code2XXX, XXX2code, all_XXX_codes, and all_XXX_names functions
       now support retired codes.  RT 71124

   Fixed capitalization
       The ’South Sudan’ country was all caps.  RT 71024

   Pod tests off by default
       The pod tests will not run at install time.  RT 71122

   Codesets may be specified by name
       All codesets may be specified by a constant or by their name now.
           Previously, they were specified only by a constant.

   alias_code deprecated
       The alias_code function exists for backward compatibility.  It has

       been replaced by rename_country_code .  The alias_code function
       will be removed sometime after September, 2013 .

   Code cleanup
       All work is now done in the central module (Locale::Codes).
       Previously, some was still done in the wrapper modules
       (Locale::Codes::*) but that is gone now.

   Added LangFam module
       Added Language Family codes (langfam) as defined in ISO 639−5.

VERSION 3.18  (2011−08−31)
   NEW CODE(s)

   No longer use CIA data
       The CIA world added non‐standard values, so I no longer use it as a
       source of data.  Based on a report by Michiel Beijen.

VERSION 3.17  (2011−06−28)
   NEW CODE(s)

   Added new types of codes
       Added Language Extension codes (langext) and Language Variation
       codes (langvar) as defined in the IANA language registry.

   Added new codeset(s)
       Added language codes from ISO 639−5
       Added language/script codes from the IANA language subtag registry

   Bug fixes
       Fixed an uninitialized value warning.  RT 67438
       Fixed the return value for the all_XXX_codes and all_XXX_names
       functions.  RT 69100

   Reorganized code
       Reorganized modules to move Locale::MODULE to Locale::Codes::MODULE
       to allow for cleaner future additions.  The original four modules
       (Locale::Language, Locale::Currency, Locale::Country,
       Locale::Script) will continue to work, but all new sets of codes
       will be added in the Locale::Codes namespace.

VERSION 3.16  (2011−03−01; sbeck)
   NEW CODE(s)

VERSION 3.15  (2010−12−02; sbeck)
   NEW CODE(s)

   Minor fixes
       Added version number to Makefile.PL/Build.PL requirement for POD
       testing modules.  RT 62247

       Changed ’use vars’ to ’our’

VERSION 3.14  (2010−09−28; sbeck)
   NEW CODE(s)

   Bug fixes
       Stripped out some HTML that got included with some codes.

Log message:
Revision bump after updating perl5 to 5.14.1.

Log message:
Update to 3.13:

3.13  2010-06-04 sbeck
        * NEW CODE(s)

3.12  2010-04-06 sbeck
        * NEW CODE(s)
        * Renamed test.pl to testfunc.pl to avoid causing an error
          when built as part of perl.

Log message:
Bump the PKGREVISION for all packages which depend directly on perl,
to trigger/signal a rebuild for the transition 5.10.1 -> 5.12.1.

The list of packages is computed by finding all packages which end
up having either of PERL5_USE_PACKLIST, BUILDLINK_API_DEPENDS.perl,
or PERL5_PACKLIST defined in their make setup (tested via
"make show-vars VARNAMES=..."), minus the packages updated after
the perl package update.

sno@ was right after all, obache@ kindly asked and he@ led the
way. Thanks!

Log message:
Updating misc/p5-Locale-Codes from 2.07nb1 to 3.11

pkgsrc changes:
- Add license definition

Upstream changes:
3.11  2010-03-01 sbeck
	* NEW CODE(s)
	* Added the IANA domain names to Country
	* Fixed a problem that produced warnings with perl 5.11.5.
		Jerry D. Hedden
	*

3.10  2010-02-18 sbeck
	* Moved support files into the Locale::Codes namespace.
	* The work done in each of the Locale::XXX modules was
		virtually identical to each other. It has all
		been moved to a central module and the
		Locale::XXX moduels are now just wrappers.
	* The XXX_code2code functions would return undef if the
		same codeset were passed in for both the 2nd and
		3rd arguments. This doesn't make sense and has
		been changed.
	* Added all semi-private routines (except for the
		couple that were already present):
			rename_XXX
			add_XXX
			delete_XXX
			add_XXX_alias
			delete_XXX_alias
			rename_XXX_code
			add_XXX_code_alias
			delete_XXX_code_alias
	* Added "UK" alias. Steve Hay

3.01  2010-02-15 sbeck
	* Fixed Makefile.PL and Build.PL to install as core
		modules.

3.00  2010-02-10 sbeck
	* Took over maintenance of the code
	* All codes and country names come from the official
		standards
	* code2country now returns the name of the country specified
	        in the standard (if the different standards refer
	        to the country by different variations in the name,
	        the results will differe based on the CODESET)
	* Added code sets
		FIPS 10 country codes
		Alpha-3 and Term language codes
		Numeric currency codes
	* The rename_country funcion from 2.07 would guess the
		CODESET (unlike all other functions which used
		a default of LOCALE_CODE_ALPHA_2). The guess can
		cause problems since (with the addition of FIPS)
		codes may appear in different codesets for different
		countries. The behavior has been changed to be
		the same as other functions (default to
		LOCALE_CODE_ALPHA_2).
	* Dropped support for _alias_code
	* Added language_code2code, currency_code2code

Log message:
Bump the PKGREVISION for all packages which depend directly on perl,
to trigger/signal a rebuild for the transition 5.8.8 -> 5.10.0.

The list of packages is computed by finding all packages which end
up having either of PERL5_USE_PACKLIST, BUILDLINK_API_DEPENDS.perl,
or PERL5_PACKLIST defined in their make setup (tested via
"make show-vars VARNAMES=...").

Log message:
Update misc/p5-Locale-Codes from 1.06 to 2.07

2.07  2004-06-10 neilb
	* made $_ local in the initialisation code for each module
		change back-propagated from Perl distribution
	* removed two non ISO-8859-1 characters from language names
		change back-propagated from Perl distribution
	* added the following aliases, with a test case for each
		- Burma added to Myanmar
		- French Southern and Antarctic Lands to
		  French Southern Territories
	  patch from TJ Mather
	* "Canadian Dollar" was mis-spelled as "Candian Dollar"
		- noted by Nick Cabatoff, patch from Michael Hennecke
	* Changes to Locale::Country reflecting changes in ISO 3166
		- added Aland Islands (ax, ala, 248)
		- YUGOSLAVIA is now SERBIA AND MONTENEGRO
			YU => CS
			YUG => SCG
			891 => 891 (unchanged)
			(YUGOSLAVIA retained as an alias)
		- EAST TIMOR changed to TIMOR-LESTE
			(old name retained as an alias)
		- three letter code for Romania changed from ROM to ROU
	* ZAIRE is now CONGO, THE DEMOCRATIC REPUBLIC OF THE
			ZR  => CD
			ZAR => COD
			180 => 180 (unchanged)
			(ZAIRE retained as alias)

2.06  2002-07-15 neilb

	* The four modules which have data after __DATA__ weren't
	  closing the DATA filehandle after reading from it,
	  which they should. Bug and patch from Steve Hay.

2.05  2002-07-08 neilb

	* Added three letter codes for the countries that were missing
	  them. Patch from TJ Mather.
	* Documentation bug: one of the examples used => where the
	  lvalue was a constant, which isn't allowed, unless you
	  put the () with the constant to force the right interpretation.
	  Pointed out by TJ Mather and MYT.
	* Updated the URL for the appendix in the CIA world factbook.
	  Patch from TJ Mather.

2.04  2002-05-23 neilb

	* updated according to changes in ISO 3166-1 described
	  in ISO 3166-1 newsletters V-4 and V-5, dated 2002-05-20:
		- Kazakstan is now "Kazakhstan"
		- Macau is now "Macao"
	  The old names are retained as aliases.

	  The alpha-2 and alpha-3 codes for East Timor have changed:
		tp -> tl
		tmp -> tls
	  the numeric code stays 626. If you want to support the old
	  codes, you can use the semi-private function alias_code().

2.03  2002-03-24 neilb

	* Fixed a typo in the alias for the Vatican, reported (with patch)
	  by Philip Newton.
	* Added "Moldova" as an alias for "Moldova, Republic of"
	* Updated Makefile.PL to include AUTHOR and ABSTRACT

2.02  2002-03-09 neilb

	* added semi-private routine rename_country() to Locale::Country,
	  based on a patch from Iain Chalmers.
	* added test rename.t for the above function.
	* renamed _alias_code to be alias_code. Have retained the old
	  name for backwards compatibility. Will remove it when the
	  major version number next changes.

2.01  2002-02-18 neilb

	* Split the documentation for all modules into separate pod files.
	* Made sure all =over were =over 4; some were other values.
	* The code2code() methods had one more shift than was needed.

2.00  2002-02-17 neilb

	* Created Locale::Script which provides an interface to the
	  ISO codes for identification of scripts (writing scripts,
	  rather than perl style scripts). The codes are defined
	  by ISO 15924, which is currently in final draft.
	  Thanks to Jarkko for pointing out this new standard.
	  All three code sets are supported, and a test-suite added.

	* Added support for country name variants to Locale::Country,
	  so that
		country2code('USA')
		country2code('United States')
		country2code('United States of America')
	  will all return 'us'.
	  This had been in the LIMITATIONS section since the first version.
	  Patch from TJ Mather <tjmather@tjmather.com> with additional
	  variants from me. Added test-cases for these.

	* Added VERSION to Locale::Constants. Thanks to Jarkko for
	  pointing that it was missing.

	* Should really have bumped major version with previous release,
	  since there was a change to the API.