Log message:
Update p5-SNMP-Info to 2.06.

Changes from previous:
version 2.06 (2011-09-28)

    [NEW FEATURES]

    * Support for PacketFront devices in new class L3::PacketFront
    * Support for Mikrotik devices in new class L3::Mikrotik
    * Support for HP VirtualConnect switches in new class L2::HPVC
    * Support for ADSL-LINE-MIB in new class AdslLine

    [ENHANCEMENTS]

    * POD clarification on i_speed() munging by Info.pm
    * Added i_stack_status method that can be used for finding the parent
      interface for e.g. ADSL interface speed determination

    [BUG FIXES]

    * [3344843] Fix returning serial() and os_ver() for web-managable HP
      switches, introduced by HP/HP4000 class split, reported by J R Binks
    * [2809033] Put L2-only Cisco blade switches in L3::C6500
    * [3408506] Fix uninitialized value in IPv6 when neighbor state is
      incomplete (Michael Borgelt)

version 2.05 (2011-06-23)
    + Fix broken function call in L2::Aironet
    + Promote L2::Aruba to L3::Aruba, as Aruba devices can be L3 entities and
      provide L3 information.

Log message:
Revision bump after updating perl5 to 5.14.1.

Log message:
Update to 2.04. Changes since 2.01:
    + Support for older HP switch models moved to new L2::HP4000 class
    + Fix VLAN changing in L2::HP and L2::HP4000 classes
    * Updated model lists in HP classes
    + [2980782] Added L3::CiscoFWSM for Cisco Firewall Services Modules
      (Brian De Wolf)
    + Added L3::Pf for FreeBSD PFSense Firewalls (max)
    * Added specific functions for neighbor mgmt addresses to CDP class
    * Implemented os_bin() method in CiscoStats
    + [2980787] Fix for C1900 bp_index not containing interfaces.
      (Brian De Wolf)
    + [2599795] Added vendor_i_type() method to HP and HP4000 clases
    + [2688801] Minor modification for obscure Proxim/Orinoco device
      (jrbinks)
    + [3051443] Add PoE measured power per port to Cisco, Extrme and HP
      classes (jeroenvi)
    * Minor tweaks to support devices without sysServices
    * Added Cisco CBS3xxx blade switches to L3::C6500
    * Fix for FWSMs not being detected properly.  Special thanks goes to
      Jukka Pirhonen for pointing it out. (Brian De Wolf)
    + Added support for IPv6 to physical address mapping
    * Added ME340x to L3::C3550
    * Added new ProCurve models to HP class

Log message:
Bump the PKGREVISION for all packages which depend directly on perl,
to trigger/signal a rebuild for the transition 5.10.1 -> 5.12.1.

The list of packages is computed by finding all packages which end
up having either of PERL5_USE_PACKLIST, BUILDLINK_API_DEPENDS.perl,
or PERL5_PACKLIST defined in their make setup (tested via
"make show-vars VARNAMES=..."), minus the packages updated after
the perl package update.

sno@ was right after all, obache@ kindly asked and he@ led the
way. Thanks!

Log message:
Updating net/p5-SNMP-Info from 2.00nb1 to 2.01

pkgsrc changes:
  - Adding license definition

Upstream changes:
version 2.01 (06/12/09)
    + Added CiscoStpExtensions Class (Carlos Vicente)
    + Added Layer3::Arista (fenner)
    + [2020353] Added L3::Altiga for Cisco (Altiga) VPN3000 Concentrators
                (Jeroen van Ingen)

    * Fixed RFC1213-MIB vs IF-MIB collision in ifOperStatus
    * Updated test_class.pl for better debug info and relative path
    * Add cisco vendor detection by OID in Layer3.pm (Sam Stickland)
    * Fix CaSe of EtherLike-MIB in EtherLike.pm (Alexander Hartmaier)
    * Added Cisco FWSM to L3::Cisco
    * Added s222_rp to L3::C6500
    * Added CIGESM to L2::C2900
    * Added Airespace WLC to L2::Airespace
    * Updated POD and DeviceMatrix quite a bit
    * Added ENTITY-MIB to CiscoStats for better model handling above
    * Fix networkaddress handling in LLDP-MIB
    * Added CiscoConfig to L2::Aironet, L3::C3550  classes
    * Better SSID capabilities for L2::Aironet
    * Fix CDP vs LLDP in c_id() for HP Class
    * test_class.pl improvements

Log message:
Bump the PKGREVISION for all packages which depend directly on perl,
to trigger/signal a rebuild for the transition 5.8.8 -> 5.10.0.

The list of packages is computed by finding all packages which end
up having either of PERL5_USE_PACKLIST, BUILDLINK_API_DEPENDS.perl,
or PERL5_PACKLIST defined in their make setup (tested via
"make show-vars VARNAMES=...").

Log message:
Update from version 1.04 to 2.00, discussed with maintainer.

Pkgsrc changes:
 o Change HOMEPAGE to use search.cpan.org, retain old commented out

Upstream changes:

version 2.00 (08/01/08)
    + Support for Alcatel-Lucent OmniSwitch via L3::AlcatelLucent
    + Support for Alcatel-Lucent Service Router via L3::Timetra
    + Support for Alcatel-Lucent OmniAccess via L2::Aruba

    * Silence warnings in MAU due to uninitialized variables

version 1.09 (07/22/08) - Beta/developer release
    + Added support for HP ProCurve Foundry OEM switches, such as the 9300
      series, in new class L3::HP9300 (contributions from Douglas McKeown and
      Ivan Auger)
    + Added support for CISCO-PAE-MIB in CiscoPortSecurity (Kesy)
    + Support for D-Link devices through L3::Dell
    + Support for Linksys SRW2048 through L3::Dell
    + Support for IBM BladeCenter 4-Port GB Ethernet Switch Module through
      L3::Dell (Alex Kramarov)
    + Support for newer Nortel Alteon switches and Nortel BladeCenter Switch
      Modules in L3::AlteonAD
    + Support for Cisco 1250 series through L2::Aironet
    + Updates to fan, power supply, and serial number methods in
      L2::HP (Jeroen van Ingen)
    + Use Cisco Client Association MIBs for Aironet client reporting
      via fw_mac
    + Support VLANs on Aironet
    + Get the proper radio MAC address from aironet in MBSS mode
    + Additional wireless statistics from Aironet
    + Add support to specify MIB to resolve leaf names conflicts in
      %GLOBALS and %FUNCS.
    + Added munge_port_list() and modify_port_list() methods to assist in
      working with PortList objects.
    + Added set_multi() method to enable a SNMP set command on several new
      values in one request.  Required for complex set operations
      on some agents.
    + Infrastructure for SNMPv3 support:
        + Save the SecName passed into the constructor
        + Create an update() function, which replaces the underlying
          SNMP session using different parameters.
        + Return the SecName instead of community from snmp_comm() when using
          SNMPv3.

    * L2::HP now isa Layer3 instead of Layer2 to support arpnip
      (Dudley Freeman)
    * Silence warnings from Cisco devices which don't return values for
      extended VLAN range (1024-4096)
    * Documentation coverage, spelling, and syntax updates
    * set_i_pvid(), set_i_vlan(), set_add_i_vlan_tagged(),
      set_remove_i_vlan_tagged() removed from Bridge and HP classes due to
      incompatibility across devices.

version 1.07 (11/26/07) - Beta/developer release

version 1.05 (11/25/07) - CVS only. No official release
    + Added support for LLDP in new class LLDP (contributions from Bernhard
      Augenstein)
    + Added device specific support for LLDP in L2::HP, L2::Baystack,
      L3::Enterasys and L3::Foundry
    + Added support for Enterasys devices as new class L3::Enterasys
    + Added support for Dell PowerConnect switches as new class L3::Dell
    + Added basic support for generic routers running Microsoft Windows OS
      as new class L3::Microsoft (begemot)
    + Added basic support for Sun routers as new class L3::Sun (begemot)
    + Added basic support for Juniper NetScreen devices as new class
      L3::Netscreen (Kent Hamilton)
    + Added support for Cyclades terminal servers as new class L1::Cyclades
    + Added support for Cisco (Airespace) wireless controllers as new class
      L2::Airespace
    + Added support for Nortel Ethernet Routing Switch 2500 series and
      Business Ethernet Switches (David Siebörger)
    + Update of L3::Foundry to support all Foundry devices including newer
      switches.  Depreciate L2::Foundry.
    + Added generic device type detection using IANA assigned enterpise
      number extracted from sysObjectID
    + Added ifDiscards and other missing entries from IF-MIB::ifEntry (Greg King)
    + Added CGESM devices to L2::C2900 class (Alexander Hartmaier)
    + Added support for dual speed 10/100 hubs and i_speed() in L1::Bayhub
    + Added i_ssidlist(), i_ssidbcast(), and i_80211channel() methods to
      L2::Aruba, Airespace, and L2::NAP222x classes
    + New class IEEE802dot11 class for generic standards based wireless AP
      support to include i_ssidlist()and i_80211channel() methods.
    + L2::Orinoco inherits from new IEEE802dot11 for i_ssidlist()and
      i_80211channel() support.
    + Added new VLAN methods i_pvid(), i_vlan_membership(), set_i_pvid(),
      set_i_vlan(), set_add_i_vlan_tagged(), set_remove_i_vlan_tagged() to
      Bridge, CiscoVTP, Extreme, HP, and RapidCity classes.
    + Added set_i_speed_admin() method to RapidCity class,
    + Added set_i_duplex_admin() method to RapidCity class,
    + Added OSPF Neighbor Tables, SF Patch 1577918 to Layer 3 (Andrew Herrick)
    + Added CiscoConfig class, SF Patch 1555001 (Justin Hunter)
    + Enable load_ methods for %GLOBALS and MIB Leaf node names.
    + Enable dynamic methods in AUTOLOAD with MIB Leaf node names for loaded
      MIBs without definition in %FUNCS or %GLOBALS.  Single instance mib leafs
      will be treated as a GLOBAL and returna scalar while mib leafs which
      reside in a table will be treated as a FUNC and return a reference to a
      hash.
    + Enable load_ methods for %GLOBALS and MIB Leaf node names.
    + Add loop detect option and code for getnext table column walks.
    + Add Layer3::NetSNMP for Net-SNMP-based hosts, part of
      SF patch 1557529 (Bradley Baetz).
    + Add EIGRP Neighbor Tables to L3::Cisco SF Patch 1577927 (Andrew Herrick)
    + Additions to CiscoQOS and CiscoStats (Alexander Hartmaier)
    + Emulate ENTITY-MIB Physical Table methods for devices which don't
      have ENTITY-MIB support in Airespace, Bayhub, Baystack, BayRS,
      NortelStack, and Passport classes.
    + Enable use of MIB Leaf node names in SNMP sets.
    + Add POWER-ETHERNET-MIB and CISCO-POWER-ETHERNET-EXT-MIB support.

    * Fix for bug where an SNMP error in any operation would cause subsequent
      table get operations to fail while using the same session, originally
      identified by Nicolai Petri.
    * Enable single instance partial table fetches (Alexander Hartmaier)
    * Enable partial table fetches in overriden table methods (Justin Hunter)
    * Allow partial table fetches with load_ methods.
    * Fixed vlan trunk port handling bug in L2:HP (Michael Robbert)
    * Correct bp_port() definition in Bridge class (Reported by Nicolai Petri)
    * Remove port security definitions from CiscoStack and move into new class
      CiscoPortSecurity.  Needed to support devices such a L3::C4000 which
      support CISCO-PORT-SECURITY-MIB, but not CISCO-STACK-MIB.
      (Reported by Prakash RudraRaju)
    * Correct port numbering for Nortel 8110, 1100, 1150 in L3:Passport
      (Reported by David Pinkoski)
    * Documentation updates
    * Translate OIDs returned by Entity MIB e_type
    * Modify inheritance to use Cisco classes before generic classes
    * Create e_index method in ENTITY-MIB to facilitate emulation methods in
      other classes as entPhysicalIndex is not-accessible.
    * Only return MAC from munge_mac() if it actually is a MAC. Fix for
      netdisco where device would not be inserted in DB due to malformed MAC.
    * Enable SUPER class calls to find autoloaded methods (Bernhard Augenstein)
    * Clear attribute cache on sucessful SNMP set.
    * Improve accuracy of operational and administrative duplex reporting on
      devices using CiscoStack.
    * All i_type() methods now use standard IANAifType values.
    * Report bridge groups (VLANs) in L2::C1900.
    * Turn on bulkwalk for C6500.  Users with buggy OS versions can turn
      it off when creating the object.
    * c_ip() now attempts to return only IPV4 addresses, use c_addr() for all
      address types.

Log message:
Add DESTDIR support.

Log message:
Remove empty PLISTs from pkgsrc since revision 1.33 of plist/plist.mk
can handle packages having no PLIST files.

Log message:
Update to version 1.04.
Maintainer said: please go ahead.

Changes since last packaged version (0.9.0):
version 1.04 (07/08/06)
    +  Added C1130 and C1240 to L2::Aironet (Ralf Gross)
    +  Added detection for Cisco 2960, 2940, 3400 w/ MetroBase
    +  Added generic L2::Cisco Class
    *  Corrected detection for Cisco Supervisor Engine 2 and 32 (IOS).
    *  Fixed warnings in CiscoStack
    *  Updated ProCurve HP device detection for newer firmwares

version 1.03 (04/14/06) - Beta/developer release
    * Use ipNetToMedia table instead of atTable for ARP
    * Remove CiscoStack from Layer3::C4000
    * Fixed bug in MAU class when polling devices without MAU-MIB support

version 1.01 (04/08/06) - Beta/developer release
    + Change version numbers to X.XX format.  Odd releases are beta
      or developer only releases.  Even are official releases.

version 1.0 (04/07/06) - CVS only. No official release
    + Added Interface FlowControl status to CiscoStack (Nicolai Petri)
    + Added CiscoImage class (Matthew Tuttle)
    + Added C1200 and C350 IOS devices to L2::Aironet (Matthew Tuttle)
    + Added support for Foundry IronWare and gave L3::Foundry CPR
    + Added support for Foundry EdgeIrons as new class L2::Foundry
    + Added BulkWalk and BulkRepeaters options to new()
    + Added DebugSNMP option to new()
    + Added CISCO-ENTITY-VENDORTYPE-OID-MIB,CISCO-PRODUCTS-MIB,CISCO-STACK-MIB
      to CiscoStats.pm for model()
    + Check for bulkwalk_no() method
    + Added Entity.pm to L3 and L2 classes per N. Petri's suggestion.
    + Added support for Passport/Accelar 1100 and 1200 series in L3::Passport
    + Added support for Passport/Accelar 8100 series in L3::Passport
    + Added support for Passport 1600 series as new class, L3::N1600
    + Added support for Extreme Alpine and Summit switches as new class
      L3:Extreme (Mike Hunter and Eric Miller)
    + Added support for Aruba wireless switches (Eric Miller and Brian Chow)
    + Added support for Nortel 2700 series (Airespace) wireless switches
    + Added support for Synoptics hubs as new class L1:S3000
    + Added Cisco QOS and RTT classes (Alexander Hartmaier)
    + Added BGP Peer Table to L3 class (Carlos Vicente)
    + Added ipforwarding status to Info base class (Carlos Vicente)
    + Added STP port state to Bridge class (Alexander Barthel)
    + Added L3 support (arpnip) to Baystack class for routing capable switches
    + Added set_i_duplex_admin() and set_i_speed_admin() to C2900 class (Justin \ 
Hunter)
    + Added set_i_duplex_admin() and set_i_speed_admin() to CiscoStack class
    + CDP added to Aironet class
    + Added Juniper class
    + Added support for Catalyst 4000 and 4500, get admin. duplex
      and speed properly
    + Added i_speed_high(), which i_speed() uses if needed to support
      interfaces >4Gbps
    * More error checking in  _load_attr() around bulkwalk code
    * Minor warning fix in L3::Aironet::os_ver()
    * Abstracted remaining Cisco stuff from L3 to L3::Cisco
    * Removed all Cisco stuff from L2
    * Expanded Entity.pm to cover the whole ENTITY-MIB and improved docs.
    * changed all refs to $DEBUG to $self->debug() for reentrant code
    * [ 1111284 ] Parameters not being set with AutoSpecify - fixed.
    * Turned off BULKWALK for C1900 and C6500 classes.
    * Added exception handling for V2 ENDOFMIBVIEW
    * Fix in SONMP when topology not enabled
    * Fix in L3::Passport root_ip()
    * Fix in L3::Passport bp_index() some devices not returning complete index.
    * Enable set_i_up_admin() in Bayhub
    * Recognize new Nortel model names in Baystack and Passport classes
    * Orinoco class should now recognize more models
    * Cleanup model recognition in Baystack class, recognize more models
    * Modify Catalyst class to use CISCO-STACK-MIB for brige port index mapping
      some devices having problems returning complete index from BRIDGE-MIB
    * Check root ip for reachability before assignment
    * HP class should recognize more models
    * Fix in HP class for models not returning full bp_index
    * [ 1436103 ] L2::Aironet devices weren't getting their model
      translated properly