Log message:
Maintenance update of glusterfs to 3.7.6

Log message:
Add SHA512 digests for distfiles for filesystems category

Existing SHA1 digests verified, all found to be the same on the
machine holding the existing distfiles (morden).  Existing SHA1
digests retained for now as an audit trail.

Log message:
Update filesytems/glusterfs to 3.7.5

This is a bugfix release

Log message:
Recursive revbump from textproc/icu

Log message:
Maintenance upgrade to 3.7.4

Log message:
Upgrade glusterfs to 3.7.3

This is a maintenance upgrade, complete bugfix list is available
from distribution ChangeLog

Log message:
Upgrade to glusterfs 3.7.2

Complete list of changes since 3.7.1:
- doc: add 1233044, 1232179 in 3.7.2 release-notes
- features/bitrot: fix fd leak in truncate (stub)
- doc: add release notes for 3.7.2
- libgfchangelog: Fix crash in gf_changelog_process
- glusterd: Fix snapshot of a volume with geo-rep
- cluster/ec: Avoid parallel executions of the same state machine
- quota: fix double accounting with rename operation
- cluster/dht: Prevent use after free bug
- cluster/ec: Wind unlock fops at all cost
- glusterd: Buffer overflow causing crash for glusterd
- NFS-Ganesha: Automatically export vol that was exported before vol restart
- common-ha: cluster HA setup sometimes fails
- cluster/ec: Prevent double unwind
- quota/glusterd: porting to new logging framework.
- bitrot/glusterd: gluster volume set command for bitrot should not supported
- tests: fix spurious failure in bug-857330/xml.t
- features/bitrot: tuanble object signing waiting time value for bitrot
- quota: don't log error when disk quota exceeded
- protocol/client : porting log messages to new framework
- cluster/afr: Do not attempt entry self-heal if the last lookup on entry
  failed on src
- changetimerecorder : port log messages to a new framework
- tier/volume set: Validate volume set option for tier
- glusterd/tier: glusterd crashed with detach-tier commit force
- rebalance,store,glusterd/glusterd: porting to new logging framework.
- libglusterfs: Enabling the fini()  in cleanup_and_exit()
- sm/glusterd: Porting messages to new logging framework
- nfs: Authentication performance improvements
- common-ha: cluster HA setup sometimes fails
- glusterd: subvol_count value for replicate volume should be calculate
  correctly
- common-ha : Clean up cib state completely
- NFS-Ganesha : Return correct return value
- glusterd: Porting messages to new logging framework.
- glusterd: Stop tcp/ip listeners during  glusterd exit
- storage/posix: Handle MAKE_INODE_HANDLE failures
- cluster/ec: Prevent Null dereference in dht-rename
- doc: fix markdown formatting
- upcall: prevent busy loop in reaper thread
- protocol/server : port log messages to a new framework
- nfs.c nfs3.c: port log messages to a new framework
- logging: log "Stale filehandle" on the client as Debug
- snapshot/scheduler: Modified main() function to take arguments.
- tools/glusterfind: print message for good cases
- geo-rep: ignore symlink and harlink errors in geo-rep
- tools/glusterfind: ignoring deleted files
- spec/geo-rep: Add rsync as dependency for georeplication rpm
- features/changelog: Do htime setxattr without XATTR_REPLACE flag
- tools/glusterfind: Cleanup glusterfind dir after a volume delete
- tools/glusterfind: Cleanup session dir after delete
- geo-rep: Validate use_meta_volume option
- spec: correct the vendor string in spec file
- tools/glusterfind: Fix GFID to Path conversion for dir
- libglusterfs: update glfs-message header for reserved segments
- features/qemu-block: Don't unref root inode
- features/changelog: Avoid setattr fop logging during rename
- common-ha: handle long node names and node names with '-' and '.' in them
- features/marker : Pass along xdata to lower translator
- tools/glusterfind: verifying volume is online
- build: fix compiling on older distributions
- snapshot/scheduler: Handle OSError in os. callbacks
- snapshot/scheduler: Check if GCRON_TASKS exists before
- features/quota: Fix ref-leak
- tools/glusterfind: verifying volume presence
- stripe: fix use-after-free
- Upcall/cache-invalidation: Ignore fops with frame->root->client not set
- rpm: correct date and order of entries in the %changelog
- nfs: allocate and return the hashkey for the auth_cache_entry
- doc: add release notes for 3.7.1
- snapshot: Fix finding brick mount path logic
- glusterd/snapshot: Return correct errno in events of failure - PATCH 2
- rpc: call transport_unref only on non-NULL transport
- heal : Do not invoke glfs_fini for glfs-heal commands
- Changing log level from Warning to Debug
- features/shard: Handle symlinks appropriately in fops
- cluster/ec: EC_XATTR_DIRTY doesn't come in response
- worm: Let lock, zero xattrop calls succeed
- bitrot/glusterd: scrub option should be disabled once bitrot option is
  reset
- glusterd/shared_storage: Provide a volume set option to create and mount
  the shared storage
- dht: Add lookup-optimize configuration option for DHT
- glusterfs.spec.in: move libgf{db,changelog}.pc from -api-devel to -devel
- fuse: squash 64-bit inodes in readdirp when enable-ino32 is set
- glusterd: do not show pid of brick in volume status if brick is down.
- cluster/dht: fix incorrect dst subvol info in inode_ctx
- common-ha: fix race between setting grace and virt IP fail-over
- heal: Do not call glfs_fini in final builds
- dht/rebalance : Fixed rebalance failure
- cluster/dht: Fix dht_setxattr to follow files under migration
- meta: implement fsync(dir)
- socket: throttle only connected transport
- contrib/timer-wheel: fix deadlock in del_timer()
- snapshot/scheduler: Return proper error code in case of failure
- quota: retry connecting to quotad on ENOTCONN error
- features/quota: prevent statfs frame loss when an error happens during
  ancestry
- features/quota : Make "quota-deem-statfs" option "on" by \ 
default, when
  quota is  enabled
- cluster/dht: pass a destination subvol to fop2 variants to avoid races.
- cli: Fix incorrect parse logic for volume heal commands
- glusterd: Bump op version and max op version for 3.7.2
- cluster/dht: Don't rely on linkto xattr to find destination subvol
- afr: honour selfheal enable/disable volume set options
- features/shard: Fix incorrect parameter to get_lowest_block()
- libglusterfs: Copy d_len and dict as well into dst dirent
- features/quota : Do unwind if postbuf is NULL
- cluster/ec: Fix incorrect check for iatt differences
- features/shard: Fix issue with readdir(p) fop
- glusterfs.spec.in: python-gluster should be 'noarch'
- glusterd: Bump op version and max op version for 3.7.1
- glusterd: fix repeated connection to nfssvc failed msgs

Log message:
Reapply fix for broken build system after defuzzing.

Log message:
* Bitrot Detection

Bitrot detection is a technique used to identify an ?insidious?
type of disk error where data is silently corrupted with no indication
from the disk to the storage software layer that an error has
occurred. When bitrot detection is enabled on a volume, gluster
performs signing of all files/objects in the volume and scrubs data
periodically for signature verification. All anomalies observed
will be noted in log files.

* Multi threaded epoll for performance improvements

Gluster 3.7 introduces multiple threads to dequeue and process more
requests from epoll queues. This improves performance by processing
more I/O requests. Workloads that involve read/write operations on
a lot of small files can benefit from this enhancement.

* Volume Tiering [Experimental]

Policy based tiering for placement of files. This feature will serve
as a foundational piece for building support for data classification.

Volume Tiering is marked as an experimental feature for this release.
It is expected to be fully supported in a 3.7.x minor release.
Trashcan

This feature will enable administrators to temporarily store deleted
files from Gluster volumes for a specified time period.

* Efficient Object Count and Inode Quota Support

This improvement enables an easy mechanism to retrieve the number
of objects per directory or volume. Count of objects/files within
a directory hierarchy is stored as an extended attribute of a
directory. The extended attribute can be queried to retrieve the
count.

This feature has been utilized to add support for inode quotas.

* Pro-active Self healing for Erasure Coding

Gluster 3.7 adds pro-active self healing support for erasure coded
volumes.

* Exports and Netgroups Authentication for NFS

This feature adds Linux-style exports & netgroups authentication
to the native NFS server. This enables administrators to restrict
access to specific clients & netgroups for volume/sub-directory
NFSv3 exports.

* GlusterFind

GlusterFind is a new tool that provides a mechanism to monitor data
events within a volume. Detection of events like modified files is
made easier without having to traverse the entire volume.

* Rebalance Performance Improvements

Rebalance and remove brick operations in Gluster get a performance
boost by speeding up identification of files needing movement and
a multi-threaded mechanism to move all such files.

* NFSv4 and pNFS support

Gluster 3.7 supports export of volumes through NFSv4, NFSv4.1 and
pNFS. This support is enabled via NFS Ganesha. Infrastructure changes
done in Gluster 3.7 to support this feature include:

  - Addition of upcall infrastructure for cache invalidation.
  - Support for lease locks and delegations.
  - Support for enabling Ganesha through Gluster CLI.
  - Corosync and pacemaker based implementation providing resource
    monitoring and failover to accomplish NFS HA.

pNFS support for Gluster volumes and NFSv4 delegations are in beta
for this release. Infrastructure changes to support Lease locks and
NFSv4 delegations are targeted for a 3.7.x minor release.

* Snapshot Scheduling

With this enhancement, administrators can schedule volume snapshots.

* Snapshot Cloning

Volume snapshots can now be cloned to create a new writeable volume.

* Sharding [Experimental]

Sharding addresses the problem of fragmentation of space within a
volume. This feature adds support for files that are larger than
the size of an individual brick. Sharding works by chunking files
to blobs of a configurabe size.

Sharding is an experimental feature for this release. It is expected
to be fully supported in a 3.7.x minor release.

* RCU in glusterd

Thread synchronization and critical section access has been improved
by introducing userspace RCU in glusterd

* Arbiter Volumes

Arbiter volumes are 3 way replicated volumes where the 3rd brick
of the replica is automatically configured as an arbiter. The 3rd
brick contains only metadata which provides network partition
tolerance and prevents split-brains from happening.

Update to GlusterFS 3.7.1

* Better split-brain resolution

split-brain resolutions can now be also driven by users without
administrative intervention.

* Geo-replication improvements

There have been several improvements in geo-replication for stability
and performance.

* Minor Improvements

  - Message ID based logging has been added for several translators.
  - Quorum support for reads.
  - Snapshot names contain timestamps by default.Subsequent access
    to the snapshots should be done by the name listed in gluster
    snapshot list
  - Support for gluster volume get <volname> added.
  - libgfapi has added handle based functions to get/set POSIX ACLs
    based on common libacl structures.

Log message:
ec.la is installed when MMX is present and usable. This is the default
for amd64, so include it in the PLIST & bump revision.