2021-10-26 12:20:11 by Nia Alarie | Files touched by this commit (3016) |
Log message: archivers: Replace RMD160 checksums with BLAKE2s checksums All checksums have been double-checked against existing RMD160 and SHA512 hashes Could not be committed due to merge conflict: devel/py-traitlets/distinfo The following distfiles were unfetchable (note: some may be only fetched conditionally): ./devel/pvs/distinfo pvs-3.2-solaris.tgz ./devel/eclipse/distinfo eclipse-sourceBuild-srcIncluded-3.0.1.zip |
2021-10-07 15:44:44 by Nia Alarie | Files touched by this commit (3017) |
Log message: devel: Remove SHA1 hashes for distfiles |
2021-08-14 03:04:32 by Makoto Fujiwara | Files touched by this commit (2) |
Log message: (devel/byacc) regen distinfo with DIST_SUBDIR set |
2021-08-10 16:03:56 by Frederic Cambus | Files touched by this commit (2) | |
Log message: byacc: update to 20210808. 2021-08-08 Thomas E. Dickey <dickey@invisible-island.net> * reader.c: fix memory-leak when replacing $$'s in destructor code (report/testcase by Boris Kolpackov). * main.c: account for a memory-leak * btyaccpar.skel, yaccpar.skel: revert change to initialization of yystate, which confuses gcc, making a different warning |
2021-08-03 14:19:29 by Frederic Cambus | Files touched by this commit (2) | |
Log message: byacc: update to 20210802. 2021-08-02 Thomas E. Dickey <dickey@invisible-island.net> * main.c, yacc.1: add "-h" option * main.c: map any of bison's long-options which have a corresponding yacc option into the latter, without depending upon getopt_long(). * main.c: suggested patch: From: Boris Kolpackov <boris@codesynthesis.com> Subject: Re: [PATCH] support bison's --defines and --output options in byacc 2021-08-01 Thomas E. Dickey <dickey@invisible-island.net> * output.c: fix a misplaced #line, which was after a generated line in the code-file * output.c: add a state-machine to output_semantic_actions() to detect and replace the "#line" directives added by Roland Illig's change, making them show the actual line-numbers in the code-file. * reader.c: adapt a patch by Roland Illig which added #line directives with dummy filename and line number, because the debug information was incorrect. The actual fix (see output_semantic_actions) is to emit #line directives which correspond to the code-file. * reader.c: simplify an ifdef so I can balance {/} * output.c: use new macro * defs.h: add fprintf_lineno macro * reader.c: make that a little simpler - but I see that this should be using the code-file's line-numbering rather than "" * reader.c: make that into a macro, and add a begin_case() to more/less match (the #line's are not together in some btyacc cases...) 2021-07-14 Thomas E. Dickey <dickey@invisible-island.net> * reader.c: From: Roland Illig <roland.illig@gmx.de> Subject: small patch for byacc ... this splits up "\nbreak;\n" output to put #line directives after first "\n" 2021-07-03 Thomas E. Dickey <dickey@invisible-island.net> * config.sub: 2021-07-03 From: Ozkan Sezer <sezero@users.sourceforge.net> config.sub: disable shellcheck SC2006 / SC2268 warnings This is in line with the recent config.guess change in commit 12fcf67c9108f4c4b581eaa302088782f0ee40ea * config.sub (shellcheck disable): Add SC2006,SC2268. Suggested-by: Jacob Bachmeyer <jcb@gnu.org> Signed-off-by: Ozkan Sezer <sezero@users.sourceforge.net> Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> * config.sub: 2021-07-03 From: Ozkan Sezer <sezero@users.sourceforge.net> config.sub: normalize the quoting in the `echo FOO | sed ...` Some cases quote the argument to echo and some do not. At runtime it probably does not matter because the substituted values will never contain whitespace, but quoting them all would make shellcheck more useful. * config.sub: Consistently quote the argument of echo. * doc/config.sub.1: Regenerate. Suggested-by: Jacob Bachmeyer <jcb@gnu.org> Signed-off-by: Ozkan Sezer <sezero@users.sourceforge.net> Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> 2021-07-02 Thomas E. Dickey <dickey@invisible-island.net> * config.sub: 2021-06-03 From: Ozkan Sezer <sezero@users.sourceforge.net> config.sub: replace POSIX $( ) with classic ` ` throughout This is in line with the recent config.guess change in commit d70c4fa934de164178054c3a60aaa0024ed07c91. The patch was generated using patch-6.gawk script introduced in that commit. * config.sub: Revert POSIX command substitutions to classic form. Signed-off-by: Ozkan Sezer <sezero@users.sourceforge.net> Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> |
2021-07-13 09:51:16 by Frederic Cambus | Files touched by this commit (2) | |
Log message: byacc: update to 20210619 and take MAINTAINER. 2021-06-19 Thomas E. Dickey <dickey@invisible-island.net> * configure: regen * aclocal.m4: resync with my-autoconf * btyaccpar.skel, yaccpar.skel: cancel unused assignments * output.c: gcc warning * test/run_test.sh, test/run_lint.sh, test/run_make.sh: shellcheck-warnings 2021-06-19 jannick0 * test/run_test.sh: changes suggested at https://github.com/jannick0/byacc-snapshots/tree/YYINT-fix-20210520 2021-06-13 Thomas E. Dickey <dickey@invisible-island.net> * aclocal.m4: resync with my-autoconf 2021-05-24 Thomas E. Dickey <dickey@invisible-island.net> * config.guess: 2021-05-24 (repaired) From: Dmitry V. Levin <ldv@altlinux.org> config.guess: fix shellcheck warning SC2154 While, according to Plan 9 documentation, the environment variable $cputype is set to the name of the kernel's CPU's architecture, shellcheck warns that cputype is referenced but not assigned. Be on the safe side and do not use cputype if it is not defined or empty. * config.guess (*:Plan9:*:*): Fix shellcheck warning SC2154. * config.guess: 2021-05-24 (repaired) From: Dmitry V. Levin <ldv@altlinux.org> config.guess: remove redundant quotes in case commands According to the GNU Autoconf Portable Shell Programming manual, the Bourne shell does not systematically split variables and back-quoted expressions, in particular on the right-hand side of assignments and in the argument of 'case'. The change is made automatically using the following command: $ sed -E -i 's/(\<case )"(\$[^"]+)"( in\>)/\1\2\3/' \ config.guess * config.guess: Simplify case commands by removing quotes around the argument. Suggested-by: Jacob Bachmeyer <jcb@gnu.org> * config.guess: 2021-05-24 (repaired) From: Dmitry V. Levin <ldv@altlinux.org> config.guess: simplify exit status workaround on alphaev67-dec-osf5.1 Commit 29865ea8a5622cdd80b7a69a0afa78004b4cd311 introduced an exit trap reset before exiting to avoid a spurious non-zero exit status on alphaev67-dec-osf5.1. Simplify that code a bit by moving the exit trap reset around. * config.guess (alpha:OSF1:*:*): Reset exit trap earlier. * doc/config.guess.1: Regenerate. 2021-05-20 Thomas E. Dickey <dickey@invisible-island.net> * mkpar.c, reader.c: change printf format to allow for long-YYINT * lalr.c, lr0.c: change type, fix gcc warnings * verbose.c: change type, fix gcc warnings also change printf format, to allow for long YYINT * output.c: change type, fix gcc warnings also change printf format, to allow for long-YYINT * package/debian/rules, package/byacc.spec: change max-table-size to correspond with switch of YYINT from short to int * defs.h: change default for MAXTABLE to INT_MAX, like the FreeBSD port. that requires changing some types to eliminate type-mismatches. * configure: regen 2021-05-01 Thomas E. Dickey <dickey@invisible-island.net> * aclocal.m4: resync with my-autoconf 2021-04-30 Thomas E. Dickey <dickey@invisible-island.net> * config.sub: 2021-04-30 (repaired) From: Maciej W. Rozycki <macro@orcam.me.uk> config.sub: Handle MIPS R3 and R5 ISA levels with CPU names Complement binutils commit ae52f4830604 ("Add MIPS r3 and r5 \ support.") and recognize MIPS CPU patterns for the R3 and R5 ISA levels, used by GAS to set defaults. * config.sub (mipsisa32r3, mipsisa32r3el, mipsisa32r5, mipsisa32r5el, mipsisa64r3, mipsisa64r3el, mipsisa64r5, mipsisa64r5el): Recognize. * doc/config.sub.1: Regenerate. * testsuite/config-sub.data: Add test cases. Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> 2021-04-21 Thomas E. Dickey <dickey@invisible-island.net> * config.guess, config.sub: 2021-04-21 (repaired) From: Vineet Gupta <Vineet.Gupta1@synopsys.com> Recognize arc64 This paves way for setting up arc64 software ecosystem. $ make check cd testsuite && bash config-guess.sh && rm uname PASS: config.guess checks (136 tests) cd testsuite && bash config-sub.sh PASS: config.sub checks (853 tests) PASS: config.sub idempotency checks (790 tests) PASS: config.sub canonicalise each config.guess testcase (136 tests) * config.guess (arc64:Linux:*:*): Recognize. * config.sub (arc64): Likewise. * doc/config.guess.1: Regenerate. * doc/config.sub.1: Likewise. * testsuite/config-guess.data: Add a test case for arc64. * testsuite/config-sub.data (arc64, arc*-elf): Add test cases. Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> 2021-04-16 Thomas E. Dickey <dickey@invisible-island.net> * config.guess: 2021-04-16 (repaired) From: Purple Rain <purplerain@secbsd.org> config.guess: add SecBSD support * config.guess (*:SecBSD:*:*): Recognize. * doc/config.guess.1: Regenerate. * testsuite/config-guess.data: Add a test case. Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> * config.sub: 2021-04-16 (repaired) From: Purple Rain <purplerain@secbsd.org> config.sub: add SecBSD support * config.sub (secbsd*): Recognize. * doc/config.sub.1: Regenerate. * testsuite/config-sub.data: Add x86_64-secbsd. Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> |
2021-04-02 20:59:31 by Frederic Cambus | Files touched by this commit (2) | |
Log message: byacc: update to 20210328. 2021-03-28 Thomas E. Dickey <dickey@invisible-island.net> * reader.c: ignore bison's "%empty" extension * reader.c, defs.h: %debug was a trivial bison "extension", mark it as such * yacc.1: use italics in a few places where bold was inappropriate * test/btyacc/varsyntax_calc1.tab.c, test/btyacc/varsyntax_calc1.tab.h, test/btyacc/expr.oxout.tab.c, test/btyacc/expr.oxout.tab.h, test/btyacc/inherit1.tab.c, test/btyacc/inherit1.tab.h, test/btyacc/inherit2.tab.c, test/btyacc/inherit2.tab.h, test/btyacc/ok_syntax1.tab.c, test/btyacc/ok_syntax1.tab.h, test/btyacc/err_inherit3.tab.c, test/btyacc/err_inherit3.tab.h, test/btyacc/err_inherit4.tab.c, test/btyacc/err_inherit4.tab.h, test/btyacc/btyacc_calc1.tab.c, test/btyacc/btyacc_calc1.tab.h, test/btyacc/btyacc_demo.tab.c, test/btyacc/btyacc_demo.tab.h, test/btyacc/btyacc_destroy1.tab.c, test/btyacc/btyacc_destroy1.tab.h, test/btyacc/btyacc_destroy2.tab.c, test/btyacc/btyacc_destroy2.tab.h, test/btyacc/btyacc_destroy3.tab.c, test/btyacc/btyacc_destroy3.tab.h, test/btyacc/calc1.tab.c, test/btyacc/calc1.tab.h, test/yacc/varsyntax_calc1.tab.c, test/yacc/varsyntax_calc1.tab.h, test/yacc/expr.oxout.tab.c, test/yacc/expr.oxout.tab.h, test/yacc/ok_syntax1.tab.c, test/yacc/ok_syntax1.tab.h, test/yacc/calc1.tab.c, test/yacc/calc1.tab.h: regen * reader.c: add union tag to YYSTYPE structure for compatibility with a feature which bison copied from Solaris yacc (request by Ella Stanforth) * configure: regen * config_h.in: update for _Noreturn feature * aclocal.m4: updated to work with autoheader * defs.h: apply syntax change needed for _Noreturn keyword * package/byacc.spec, package/debian/rules: use stdnoreturn * VERSION, package/byacc.spec, package/debian/changelog, package/mingw-byacc.spec, package/pkgsrc/Makefile: bump 2021-03-20 Thomas E. Dickey <dickey@invisible-island.net> * configure: regen * aclocal.m4: resync with my-autoconf (adds --enable-stdnoreturn option) |
2021-02-01 12:26:56 by Frederic Cambus | Files touched by this commit (2) | |
Log message: byacc: update to 20210109. 2021-01-09 Thomas E. Dickey <dickey@invisible-island.net> * package/debian/copyright, VERSION, package/byacc.spec, package/debian/changelog, package/mingw-byacc.spec, package/pkgsrc/Makefile: bump 2021-01-05 Thomas E. Dickey <dickey@invisible-island.net> * configure: regen * aclocal.m4: resync with my-autoconf 2020-09-22 Thomas E. Dickey <dickey@invisible-island.net> * closure.c, warshall.c: fix undefined-behavior diagnosed with gcc -fsanitize=undefined (report by Alexander Richardson) |
2020-11-25 21:51:58 by Nia Alarie | Files touched by this commit (2) | |
Log message: byacc: Update to 20200910 2020-09-10 Thomas E. Dickey <dickey@invisible-island.net> * LICENSE: RCS_BASE * reader.c, output.c: cppcheck -- reduce scope * defs.h: update to 2.0 * test/btyacc/[...] update to version 2.0 * reader.c: improve loop which skips backward through a (possibly nested) sequence of square-brackets. * reader.c: simplify a check to quiet a bogus cppcheck-warning * yacc.1: bump date * reader.c: add a note about a bogus cppcheck warning * configure: regen * configure.in: always check for gcc attributes, to work around defect in clang's imitation of this feature * reader.c: cppcheck -- scope reduction cppcheck -- eliminate bogus returns after no-return functions * verbose.c, output.c, mkpar.c, main.c, warshall.c, lr0.c, lalr.c, graph.c, \ closure.c: cppcheck -- scope reduction * package/debian/compat: quiet compatibility-warning * yacc.1: use "ASCII" for dashes which are part of proper names * configure: regen * configure.in: switch to --enable-warnings, for consistency * aclocal.m4: resync with my-autoconf, for compiler-warning fixes with macOS * VERSION, package/byacc.spec, package/debian/changelog, \ package/mingw-byacc.spec, package/pkgsrc/Makefile: bump 2020-06-28 Thomas E. Dickey <dickey@invisible-island.net> * config.sub: 2020/06/28 2020-06-14 Thomas E. Dickey <dickey@invisible-island.net> * config.guess: 2020/04/26 |
2020-04-22 07:05:56 by Nia Alarie | Files touched by this commit (2) | |
Log message: byacc: Update to 20200330 2020-03-30 Thomas E. Dickey <dickey@invisible-island.net> * package/debian/copyright: bump * test/yacc/grammar.tab.c, test/btyacc/grammar.tab.c, test/grammar.y, reader.c: typo found with codespell * yacc.1: fixes noted in the original report, overlooked in followup 2020-03-30 Bjarni.Ingi.Gislason * yacc.1: typography/spelling fixes - Debian #955175 2020-03-30 Thomas E. Dickey <dickey@invisible-island.net> * VERSION, package/byacc.spec, package/debian/changelog, \ package/mingw-byacc.spec, package/pkgsrc/Makefile: bump 2020-03-10 Thomas E. Dickey <dickey@invisible-island.net> * configure: regen * aclocal.m4: resync with my-autoconf, mostly fixes for compiler-warnings * configure.in: use macro to suppress X-dependency from newer macros 2019-12-20 Thomas E. Dickey <dickey@invisible-island.net> * config.guess: 2019-12-21 2019-11-25 Tom.Shields * main.c: fix an inconsistency between the getopt and non-getopt configuration. In the former, getopt always used "yacc", not the name of the executable. 2019-11-25 Thomas E. Dickey <dickey@invisible-island.net> * test/run_make.sh: suppress bison's -Wyacc warning, which is not useful. * VERSION, package/byacc.spec, package/debian/changelog, \ package/mingw-byacc.spec, package/pkgsrc/Makefile: bump 2019-11-19 Thomas E. Dickey <dickey@invisible-island.net> * yacc.1: new version of manpage * VERSION, package/byacc.spec, package/debian/changelog, \ package/mingw-byacc.spec, package/pkgsrc/Makefile: bump * yacc.1: document %code * test/btyacc/calc_code_all.error, test/btyacc/calc_code_all.output, \ test/btyacc/calc_code_all.tab.c, test/btyacc/calc_code_all.tab.h, \ test/btyacc/calc_code_default.error, test/btyacc/calc_code_default.output, \ test/btyacc/calc_code_default.tab.c, test/btyacc/calc_code_default.tab.h, \ test/btyacc/calc_code_imports.error, test/btyacc/calc_code_imports.output, \ test/btyacc/calc_code_imports.tab.c, test/btyacc/calc_code_imports.tab.h, \ test/btyacc/calc_code_provides.error, test/btyacc/calc_code_provides.output, \ test/btyacc/calc_code_provides.tab.c, test/btyacc/calc_code_provides.tab.h, \ test/btyacc/calc_code_requires.error, test/btyacc/calc_code_requires.output, \ test/btyacc/calc_code_requires.tab.c, test/btyacc/calc_code_requires.tab.h, \ test/btyacc/calc_code_top.error, test/btyacc/calc_code_top.output, \ test/btyacc/calc_code_top.tab.c, test/btyacc/calc_code_top.tab.h, \ test/yacc/calc_code_all.tab.c, test/yacc/calc_code_all.tab.h, \ test/yacc/calc_code_default.tab.c, test/yacc/calc_code_ provides.tab.c, test/yacc/calc_code_provides.tab.h, \ test/yacc/calc_code_requires.tab.c, test/yacc/calc_code_requires.tab.h, \ test/yacc/calc_code_top.tab.c: RCS_BASE * output.c: amend updates for 'outline' when processing "%code" in code-file * output.c: modify output_code_lines() to show begin/end block comments which were in reader.c, and to generate a #line for the code-file. * reader.c: modify copy_code() to allow for multiple %code directives for a given section, recording the input line-number for each directive as a #line in the resulting string. remove the block start/end comments, since those will be done for a whole section in output.c * mstring.c, defs.h: add msrenew() * test/yacc/calc_code_all.error, test/yacc/calc_code_all.output, \ test/yacc/calc_code_default.error, test/yacc/calc_code_default.output, \ test/yacc/calc_code_default.tab.h, test/yacc/calc_code_imports.error, \ test/yacc/calc_code_imports.output, test/yacc/calc_code_imports.tab.c, \ test/yacc/calc_code_imports.tab.h, test/yacc/calc_code_provides.error, \ test/yacc/calc_code_provides.output, test/yacc/calc_code_requires.error, \ test/yacc/calc_code_requires.output, test/yacc/calc_code_top.error, \ test/yacc/calc_code_top.output, test/yacc/calc_code_top.tab.h: RCS_BASE 2019-11-18 Thomas E. Dickey <dickey@invisible-island.net> * test/calc_code_imports.y, test/calc_code_all.y, test/calc_code_default.y, \ test/calc_code_top.y, test/calc_code_provides.y, test/calc_code_requires.y: RCS_BASE 2019-11-04 Michael.Forney * defs.h: add missing "extern" for new variable "code_lines" 2019-11-03 Thomas E. Dickey <dickey@invisible-island.net> * main.c: build-fix for MinGW cross-compiling * output.c, reader.c: gcc-warnings * output.c: check validity of text_file before rewind remove redundant check of iflag * main.c: fix memory-leak reported by clang * mkpar.c: guard against a null-reference reported by clang (unlikely) * reader.c: fix two coverity warnings: a) resource leak on malloc-failure b) possible null-pointer dereference on parse-error * test/btyacc/err_inherit4.tab.h, test/btyacc/btyacc_demo.tab.h: regen * defs.h: use enum's to simplify recent change * mstring.c: enable mstring() in regular byacc, since Zoulas' change relies upon it 2019-11-03 Christos.Zoulas * defs.h, reader.c, output.c: add support for bison's "%code" feature also fix a small bug: declare YYLTYPE externally when producing locations 2019-11-03 Thomas E. Dickey <dickey@invisible-island.net> * test/btyacc/help.error, test/btyacc/no_b_opt.error, \ test/btyacc/no_output2.error, test/btyacc/no_p_opt.error, test/yacc/help.error, \ test/yacc/no_b_opt.error, test/yacc/no_output2.error, test/yacc/no_p_opt.error: regen * test/run_test.sh: there's no standard wording for the options-errors from getopt; filter that to "error message" in the test reference files. * main.c: provide for using getopt(), to accommodate a case where developers have relied upon non-POSIX behavior. * test/run_test.sh: getopt's messages do not print the full pathname of yacc in some cases; adjust the sed-script which changes those to "YACC" * configure: regen * config_h.in: regen, using autoheader-252 * configure.in: add configure check for getopt * configure: regen * aclocal.m4: resync with my-autoconf adds a fix which accommodates a difference in warning options between gcc/clang when --enable-warnings is not set. * VERSION, package/byacc.spec, package/debian/changelog, \ package/mingw-byacc.spec, package/pkgsrc/Makefile: bump 2019-09-11 Thomas E. Dickey <dickey@invisible-island.net> * config.guess, config.sub: 2019-09-10 2019-06-17 Thomas E. Dickey <dickey@invisible-island.net> * test/btyacc/big_b.error, test/btyacc/big_l.error, test/btyacc/help.error, \ test/btyacc/no_b_opt.error, test/btyacc/no_output2.error, \ test/btyacc/no_p_opt.error, test/btyacc/nostdin.error, test/yacc/big_b.error, \ test/yacc/big_l.error, test/yacc/help.error, test/yacc/no_b_opt.error, \ test/yacc/no_output2.error, test/yacc/no_p_opt.error, test/yacc/nostdin.error: regen * test/run_test.sh: test "-H" rather than "-D" 2019-06-16 Thomas E. Dickey <dickey@invisible-island.net> * main.c, yacc.1: change "-D" option to "-H" (discussion with Ethan Sommer) * VERSION, package/byacc.spec, package/debian/changelog, \ package/mingw-byacc.spec, package/pkgsrc/Makefile: bump * test/btyacc/defines1.calc.c, test/btyacc/defines2.calc.c, \ test/btyacc/defines3.calc.c: RCS_BASE * test/run_test.sh: in test_defines, save the ".c" file too * test/yacc/defines3.calc.c, test/yacc/defines2.calc.c, test/yacc/defines1.calc.c: RCS_BASE * test/run_test.sh: output of test_defines should be a header ".h", not ".c" * test/btyacc/defines1.calc.h, test/btyacc/defines1.error, \ test/btyacc/defines1.output, test/btyacc/defines2.calc.h, \ test/btyacc/defines2.error, test/btyacc/defines2.output, \ test/btyacc/defines3.calc.h, test/btyacc/defines3.error, \ test/btyacc/defines3.output: RCS_BASE * main.c: however, a subsequent -d cancels -D * test/yacc/defines1.calc.h, test/yacc/defines3.calc.h: RCS_BASE * main.c: -D option implies -d * test/yacc/defines1.error, test/yacc/defines1.output, \ test/yacc/defines2.calc.h, test/yacc/defines2.error, test/yacc/defines2.output, \ test/yacc/defines3.error, test/yacc/defines3.output: RCS_BASE * yacc.1: align macro definitions with my other manpages * test/run_test.sh: add test for -D after -d or -b options * test/btyacc/stdin1.calc.c, test/btyacc/stdin1.error, \ test/btyacc/stdin1.output, test/btyacc/stdin2.calc.c, test/btyacc/stdin2.error, \ test/btyacc/stdin2.output: RCS_BASE * test/btyacc/big_b.error, test/btyacc/big_b.output, test/btyacc/big_l.error, \ test/btyacc/big_l.output, test/btyacc/help.error, test/btyacc/help.output, \ test/btyacc/no_b_opt.error, test/btyacc/no_b_opt.output, \ test/btyacc/no_b_opt1.error, test/btyacc/no_b_opt1.output, \ test/btyacc/no_code_c.error, test/btyacc/no_code_c.output, \ test/btyacc/no_defines.error, test/btyacc/no_defines.output, \ test/btyacc/no_graph.error, test/btyacc/no_graph.output, \ test/btyacc/no_include.error, test/btyacc/no_include.output, \ test/btyacc/no_opts.error, test/btyacc/no_opts.output, \ test/btyacc/no_output.error, test/btyacc/no_output.output, \ test/btyacc/no_output1.error, test/btyacc/no_output1.output, \ test/btyacc/no_output2.error, test/btyacc/no_output2.output, \ test/btyacc/no_p_opt.error, test/btyacc/no_p_opt.output, \ test/btyacc/no_p_opt1.error, test/btyacc/no_p_opt1.output, \ test/btyacc/no_verbose.error, test/btyacc/no_verbose.output, \ test/btyacc/nostdin.error, test/btyacc/nostdin.output, test/yacc/big_ b.error, test/yacc/big_b.output, test/yacc/big_l.error, test/yacc/big_l.output, \ test/yacc/help.error, test/yacc/help.output, test/yacc/no_b_opt.error, \ test/yacc/no_b_opt.output, test/yacc/no_b_opt1.error, \ test/yacc/no_b_opt1.output, test/yacc/no_code_c.error, \ test/yacc/no_code_c.output, test/yacc/no_defines.error, \ test/yacc/no_defines.output, test/yacc/no_graph.error, \ test/yacc/no_graph.output, test/yacc/no_include.error, \ test/yacc/no_include.output, test/yacc/no_opts.error, test/yacc/no_opts.output, \ test/yacc/no_output.error, test/yacc/no_output.output, \ test/yacc/no_output1.error, test/yacc/no_output1.output, \ test/yacc/no_output2.error, test/yacc/no_output2.output, \ test/yacc/no_p_opt.error, test/yacc/no_p_opt.output, test/yacc/no_p_opt1.error, \ test/yacc/no_p_opt1.output, test/yacc/no_verbose.error, \ test/yacc/no_verbose.output, test/yacc/nostdin.error, test/yacc/nostdin.output: regen * test/run_test.sh: add a test for stdin "-" vs end-options "--", and correct a \ redirection of stderr in test_flags * test/yacc/stdin2.output, test/yacc/stdin2.calc.c, test/yacc/stdin1.calc.c, \ test/yacc/stdin1.error, test/yacc/stdin1.output, test/yacc/stdin2.error: RCS_BASE * test/btyacc/big_b.output, test/btyacc/big_l.output, test/btyacc/help.output, \ test/btyacc/no_b_opt.output, test/btyacc/no_output2.output, \ test/btyacc/no_p_opt.output, test/btyacc/nostdin.output, test/yacc/big_b.output, \ test/yacc/big_l.output, test/yacc/help.output, test/yacc/no_b_opt.output, \ test/yacc/no_output2.output, test/yacc/no_p_opt.output, \ test/yacc/nostdin.output: regen * main.c: add -D option, to specify filename vs y.tab.h for -d * defs.h: add dflag2, for -D option * yacc.1: document -D option * config_h.in: updated with autoheader-252 * configure: regen * package/debian/copyright: bump * aclocal.m4: add CF_GETOPT_HEADER * aclocal.m4: Improved autoconf macros: + CF_CC_ENV_FLAGS putting preprocessor flags in CFLAGS also is a nuisance, which can be addressed in the same way. + CF_GCC_WARNINGS factor out workaround for XTSTRINGDEFINES as CF_CONST_X_STRING + CF_GNU_SOURCE The check for _DEFAULT_SOURCE should apply to "recent" Cygwin (since \ early 2016), and except for "NEWLIB" vs "GLIBC" in the test, acts the \ same if I pretend that "newlib" is the GNU C library. Without this, the check falls \ through to the _XOPEN_SOURCE test, which breaks the pseudoterminal checks for xterm. + CF_POSIX_C_SOURCE add/use CF_POSIX_VISIBLE + CF_TRY_XOPEN_SOURCE use CF_APPEND_TEXT + CF_WITH_MAN2HTML use sed to work around non-POSIX tail utility + CF_XOPEN_SOURCE use CF_APPEND_TEXT add/use CF_POSIX_VISIBLE * VERSION, package/byacc.spec, package/debian/changelog, \ package/mingw-byacc.spec, package/pkgsrc/Makefile: bump 2019-06-10 Thomas E. Dickey <dickey@invisible-island.net> * config.guess: 2019-06-10 2019-05-22 Thomas E. Dickey <dickey@invisible-island.net> * config.sub: 2019-05-22 |