2019-07-04 09:17:25 by Adam Ciarcinski | Files touched by this commit (8) | |
Log message:
libpcap: updated to 1.9.0
Summary for 1.9.0 libpcap release
Added testing system to libpcap, independent of tcpdump
Changes to how pcap_t is activated
Adding support for Large stream buffers on Endace DAG cards
Changes to BSD 3-clause license to 2-clause licence
Additions to TCP header parsing, per RFC3168
Add CMake build process (extensive number of changes)
Assign a value for OpenBSD DLT_OPENFLOW.
Support setting non-blocking mode before activating.
Extensive build support for Windows VS2010 and MINGW (many many changes, over \
many months)
Added RPCAPD support when --enable-remote (default no)
Add the rpcap daemon source and build instructions.
Put back the greasy "save the capture filter string so we can tweak it"
hack, that keeps libpcap from capturing rpcap traffic.
Fixes for captures on MacOS, utun0
fixes so that non-AF_INET addresses, are not ==AF_INET6 addresses.
Add a linktype for IBM SDLC frames containing SNA PDUs.
pcap_compile() in 1.8.0 and later is newly thread-safe.
bound snaplen for linux tpacket_v2 to ~64k
Make VLAN filter handle both metadata and inline tags
D-Bus captures can now be up to 128MB in size
Added LORATAP DLT value
Added DLT_VSOCK for http://qemu-project.org/Features/VirtioVsock
probe_devices() fixes not to overrun buffer for name of device
Add linux-specific pcap_set_protocol_linux() to allow specifying a specific \
capture protocol.
RDMA sniffing support for pcap
Add Nordic Semiconductor Bluetooth LE sniffer link-layer header type.
fixes for reading /etc/ethers
Make it possible to build on Windows without packet.dll.
Add tests for large file support on UN*X.
Solaris fixes to work with 2.8.6
configuration test now looks for header files, not capture devices present
Fix to work with Berkeley YACC.
fixes for DragonBSD compilation of pcap-netmap.c
Clean up the ether_hostton() stuff.
Add an option to disable Linux memory-mapped capture support.
Add DAG API support checks.
Add Septel, Myricom SNF, and Riverbed TurboCap checks.
Add checks for Linux USB, Linux Bluetooth, D-Bus, and RDMA sniffing support.
Add a check for hardware time stamping on Linux.
Don't bother supporting pre-2005 Visual Studio.
Increased minimum autoconf version requirement to 2.64
Add DLT value 273 for XRA-31 sniffer
Clean up handing of signal interrupts in pcap_read_nocb_remote().
Use the XPG 4.2 versions of the networking APIs in Solaris.
Fix, and better explain, the "IPv6 means IPv6, not IPv4" option setting.
Explicitly warn that negative packet buffer timeouts should not be used.
rpcapd: Add support inetd-likes, including xinetd.conf, and systemd units
Rename DLT_IEEE802_15_4 to DLT_IEEE802_15_4_WITHFCS.
Add DISPLAYPORT AUX link type
Remove the sunos4 kernel modules and all references to them.
Add more interface flags to pcap_findalldevs().
|
2017-07-24 09:23:28 by Darrin B. Jewell | Files touched by this commit (1) |
Log message:
use BUILTIN_FIND_HEADERS instead of BUILTIN_FIND_FILES
fixes the case where header files aren't in /usr/include (Darwin SDKs)
|
2017-04-19 13:50:18 by David Sainty | Files touched by this commit (2) |
Log message:
Remove dependencies on VERSION, which trigger unintended implicit rules against
version.c on case-insensitive file systems.
Fixes build on Darwin in its out-of-the-box case-insensitive configuration.
|
2017-02-02 19:46:39 by Maya Rashish | Files touched by this commit (4) | |
Log message:
libpcap: update to 1.8.1
Tuesday, Oct. 25, 2016 mcr@sandelman.ca
Summary for 1.8.1 libpcap release
Add a target in Makefile.in for Exuberant Ctags use: 'extags'.
Rename configure.in to configure.ac: autoconf 2.59
Clean up the name-to-DLT mapping table.
Add some newer DLT_ values: \
IPMI_HPM_2,ZWAVE_R1_R2,ZWAVE_R3,WATTSTOPPER_DLM,ISO_14443,RDS
Clarify what the return values are for both success and failure.
Many changes to build on windows
Check for the "break the loop" condition in the inner loop for \
TPACKET_V3.
Fix handling of packet count in the TPACKET_V3 inner loop: GitHub issue #493.
Filter out duplicate looped back CAN frames.
Fix the handling of loopback filters for IPv6 packets.
Add a link-layer header type for RDS (IEC 62106) groups.
Use different intermediate folders for x86 and x64 builds on Windows.
On Linux, handle all CAN captures with pcap-linux.c, in cooked mode.
Removes the need for the "host-endian" link-layer header type.
Compile with '-Wused-but-marked-unused' in devel mode if supported
Have separate DLTs for big-endian and host-endian SocketCAN headers.
Reflect version.h being renamed to pcap_version.h.
Require that version.h be generated: all build procedures we support \
generate version.h (autoconf, CMake, MSVC)!
Properly check for sock_recv() errors.
Re-impose some of Winsock's limitations on sock_recv().
Replace sprintf() with pcap_snprintf().
Fix signature of pcap_stats_ex_remote().
Initial cmake support for remote packet capture.
Have rpcap_remoteact_getsock() return a SOCKET and supply an "is \
active" flag.
Clean up {DAG, Septel, Myricom SNF}-only builds.
Do UTF-16-to-ASCII conversion into the right place.
pcap_create_interface() needs the interface name on Linux.
Clean up hardware time stamp support: the "any" device does not \
support any time stamp types.
Add support for capturing on FreeBSD usbusN interfaces.
Add a LINKTYPE/DLT_ value for FreeBSD USB.
Go back to using PCAP_API on Windows.
CMake support
Add TurboCap support from WinPcap.
Recognize 802.1ad nested VLAN tag in vlan filter.
Thursday Sep. 3, 2015 guy@alum.mit.edu
Summary for 1.7.5 libpcap release
Man page cleanups.
Add some allocation failure checks.
Fix a number of Linux/ucLinux configure/build issues.
Fix some memory leaks.
Recognize 802.1ad nested VLAN tag in vlan filter.
Fix building Bluetooth Linux Monitor support with BlueZ 5.1+
|
2016-03-08 13:53:34 by Adam Ciarcinski | Files touched by this commit (2) |
Log message:
Disable univeral builds on Darwin
|
2016-02-25 17:20:53 by Jonathan Perkin | Files touched by this commit (47) |
Log message:
Use OPSYSVARS.
|
2016-02-11 06:55:19 by John Klos | Files touched by this commit (2) |
Log message:
Fix configure to match properly for darwin9 so that PowerPC code is generated
properly on Leopard systems.
|
2015-10-17 12:07:54 by Adam Ciarcinski | Files touched by this commit (3) |
Log message:
Changes 1.7.4:
Include fix for GitHub issue 424 -- out of tree builds.
|
2015-03-11 22:05:09 by Tobias Nygren | Files touched by this commit (8) |
Log message:
Thursday Feb. 12, 2015 guy@alum.mit.edu/mcr@sandelman.ca
Summary for 1.7.2 libpcap release
Support for filtering Geneve encapsulated packets.
Wednesday Nov. 12, 2014 guy@alum.mit.edu/mcr@sandelman.ca
Summary for 1.7.0 libpcap release
Fix handling of zones for BPF on Solaris
new DLT for ZWAVE
clarifications for read timeouts.
added bpf_filter1() with extensions
some fixes to compilation without stdint.h
EBUSY can now be returned by SNFv3 code.
Monday Aug. 12, 2014 guy@alum.mit.edu
Summary for 1.6.2 libpcap release
Don't crash on filters testing a non-existent link-layer type
field.
Fix sending in non-blocking mode on Linux with memory-mapped
capture.
Fix timestamps when reading pcap-ng files on big-endian
machines.
Saturday Jul. 19, 2014 mcr@sandelman.ca
Summary for 1.6.1 libpcap release
some fixes for the any device
changes for how --enable-XXX (--enable-sniffing, --enable-can) works
Wednesday Jul. 2, 2014 mcr@sandelman.ca
Summary for 1.6.0 libpcap release
Don't support D-Bus sniffing on OS X
fixes for byte order issues with NFLOG captures
Handle using cooked mode for DLT_NETLINK in activate_new().
on platforms where you can not capture on down interfaces, do not list them
but: do list interfaces which are down, if you can capture on them!
Wednesday December 18, 2013 guy@alum.mit.edu
Summary for 1.5.3 libpcap release
Don't let packets that don't match the current filter get to the
application when TPACKET_V3 is used. (GitHub issue #331)
Fix handling of pcap_loop()/pcap_dispatch() with a packet count
of 0 on some platforms (including Linux with TPACKET_V3).
(GitHub issue #333)
Work around TPACKET_V3 deficiency that causes packets to be lost
when a timeout of 0 is specified. (GitHub issue #335)
Man page formatting fixes.
Wednesday December 4, 2013 guy@alum.mit.edu
Summary for 1.5.2 libpcap release
Fix libpcap to work when compiled with TPACKET_V3 support and
running on a kernel without TPACKET_V3 support. (GitHub
issue #329)
Wednesday November 20, 2013 guy@alum.mit.edu
Summary for 1.5.1 libpcap release
Report an error, rather than crashing, if an IPv6 address is
used for link-layer filtering. (Wireshark bug 9376)
Wednesday October 30, 2013 guy@alum.mit.edu
Summary for 1.5.0 libpcap release
TPACKET_V3 support added for Linux
Point users to the the-tcpdump-group repository on GitHub rather
than the mcr repository
Checks added for malloc()/realloc()/etc. failures
Fixed build on Solaris 11
Support filtering filtering E1 SS7 traffic on MTP2 layer Annex A
Use "ln -s" to link man pages by default
Add support for getting nanosecond-resolution time stamps when
capturing and reading capture files
Many changes to autoconf to deal better with non-GCC compilers
added many new DLT types
|
2014-10-09 16:07:17 by Thomas Klausner | Files touched by this commit (1163) |
Log message:
Remove pkgviews: don't set PKG_INSTALLATION_TYPES in Makefiles.
|