Log message:
security/py-denyhosts: port to work with python 3.x.

ListType and TupleType is just "list" and "tuple" in python 3,
google reveals...
Bump PKGREVISION.

Log message:
py-denyhosts: convert to egg.mk

Log message:
Update py-denyhosts to version 3.0.

Pkgsrc changes:
 * Change naming style for patches
 * Adapt patches to new version
 * Relinquish maintainership to indicate others can update
 * Add dependency on py-expat

Upstream changes:

3.0
======================

Initial translation of code from Python 2 to Python 3.
DenyHosts can now be run as either a Python 2 or a Python 3
program.

Added patch from Fedora to fix initial sync issue and
insure info logging stream is active.
(Provided by Jason Tibbitts.)

Added "import logging" to denyhosts.py to avoid errors
when setting up logging. (See above change.)

Added option PF_TABLE_FILE to the configuration file.
When this option is enabled it causes DenyHosts to write
blocked IP addresses to a text file. The default location
is /etc/blacklist. This text file should correspond to a
PF firewall table.

At start-up, try to create the file specified by
HOSTS_DENY. That way we avoid errors later if the
file does not exists. Can be a problem on operating systems
where /etc/hosts.deny does not exist in the default
configuration.

Added regex pattern to detect invalid user accounts. This blocks
connections from remote hosts who are attempting to login
with accounts not found on the local system.
While these connections to non-existent accounts are relatively harmless,
they are usually used as part of a brute force attack and filtering them
before they reach OpenSSH is a good idea.

2.10
======================

- Updated example rule for PF in configuration file
  to make black listing attacking IPs more effective.

- Added debugging info in case we cannot create a new
  PF table entry.

- Fixed syntax for comparing suspecious logins. Avoids
  always testing true/false depending on Python version.

- No longer require ETC_DIR in the configuration file.
  Use a default value "/etc" if ETC_DIR is not manually
  specified.

- Make sure DenyHosts logs when running in foreground mode.
  When in foreground, warnings are logged to a file rather
  than outputted to terminal. Keeps things clean.

- Add --unlock command line arguement to remove old
  lock files.

- Updated README, version and Makefile with new
  version/maintainer information.

- Added check for PAM failures on FreeBSD. This should block both
  failed user logins that are reported by PAM and also block
  repteated attempts at accessing the root account when root
  logins are disabled by OpenSSH. The latter does not really add
  more practical protection, but can prevent the connection \
  attempts at the firewall level before the OpenSSH service
  is contacted.

- Add systemd unit file, denyhosts.service

2.9 (November 3, 2014)
======================

- DenyHost now supports working with the PF
  packet filter, a popular firewall for FreeBSD,
  OpenBSD, TrueOS, PC-BSD and NetBSD.
  To enable PF support in DenyHost, comment
  out the IPTABLES option in the denyhosts.conf file
  and enable the PFCTL_PATH and PF_TABLE options.

  DenyHost will add misbehaving IP addresses to the
  PF table specified by "PF_TABLE". This table
  should be blocked using the pf.conf file. Please
  see the denyhosts.conf file for more information
  and example PF rules for blocking incoming traffic.

  Please note that even if /etc/hosts.deny is not used
  to block incoming connectins, the file should still exists
  or DenyHosts may throw an error. (This should be fixed
  in the next release.)

2.8 (June 12, 2014)
===================

- Use standard errno instead of hardcoded errno value.
  Patch provided by Pino Toscano.

- Make sure PLUGIN_DENY is called for each host we receive from
  the sync server.
  Patch provided by Sean M. Collins.

- Made sure only new hosts in hosts.deny are reported as new, not
  all hosts. This prevents the PLUGIN_DENY plugin from getting
  old entries repeatedly.
  Patch provided by Chris Erdle.

- We now check user defined regular expression filters, even
  if we already found a match with an existing filter. This
  allows the user to filter more services without using
  a plugin.
  Patch provided by Ben.

- Added --purge-all command line flag to allow us to remove all
  old entries from the deny file without waiting.
  Patch provided by 9MediaCenterGUI on SourceForge.

- Updated copyright information and some documentation.

- Added manual page from Debian and fixed typo. Added
  additional command line options to man page.

- Added --purgeip option to allow us to remove specific
  IP addresses from the blocked list at start time.
  Patch provided by Nelson Howell.
  Should close Debian bug 529089.

- Updated FAILED_ENTRY_REGEX7 to be more flexible.

- Added ability to use Linux iptables to block incoming
  connections. See IPTABLES option in the configuration file.

- Made it possible to block specific ports, allowing remote
  hosts to conenct to some services while being blocked on
  others by the iptables firewall.
  See the BLOCKPORT option in the configuration file.

2.7 (May 18, 2014)
==================

- Forked code from DenyHosts (denyhosts.sf.net)
  New project now maintained at denyhost.sf.net

- Added private moduls patch from Marco Bertorello. Loads
  modules from /usr/share/denyhosts

- Place config, lock and executable file in more
  standard locations. Patch provided by Marco Bertorello.

- Fixed configuration (denyhosts.cfg-dist) to better support
  Debian and Ubuntu. Patch supplied by Marco Nenciarini.

- Added warning to migrate switch. Patch provided by
  Marco Bertorello.

- Avoid installing unwanted files (extra scripts and changelog).
  Patch provided by Marco Nenciarini.

- Fix bug which would not recognize an attack on the root
  user account. Patch provided by Kyle Willmon.

- Fix pattern matching bug (CVE-2007-4323).
  Patch provided by Nico Golde.

- Added foreground mode for debugging.
  Patch supplied by Marco Bertorello.

- Applied patch to fix plugin execution.
  Patched provided by Marco Bertorello.

- Added patch to prevent DenyHosts from running with
  a double --config switch.
  Patch provided by Maro Bertorello.

- Convert path of "env" from /bin/env to /usr/bin/env
  Patch provided by Kyle Willmon.

- Added patch to perform missing bounds check in Purge action.
  Provided by Kyle Willmon.

- Added patch to include SYNC_PROXY_SERVER configuration option.
  Provided by Kyle Willmon.

- Change HOSTNAME_LOOKUP to default to "NO". Will save time.
  Also brings us into closer alignment with FreeBSD patches.

- Added /usr/sbin/nologin to restricted_from_passwd script.
  Requirement from FreeBSD patch set.

- Added variable "ETC_DIR" which dictates the location of
  configuration files. This should usually be set to
  /etc or /usr/local/etc

- The restricted-usernames file is now loaded from the "ETC_DIR"
  directory, rather than from "WORK_DIR" to avoid this
  human-made configuration file from being over-writeen.
  Closes Ubuntu bug #675034

- Confirm setting timestamp over-writes old tiemstamp file.
  Closes Ubuntu bug #564476

- Applied advanced pattern check for authentication file which
  takes into account alternative port numbers. Patch provided by
  Helmut Grohne.

- Updated license and readme files.

- Updated help output from DenyHost script to include --config tip.

Log message:
security: Replace RMD160 checksums with BLAKE2s checksums

All checksums have been double-checked against existing RMD160 and
SHA512 hashes

Unfetchable distfiles (fetched conditionally?):
./security/cyrus-sasl/distinfo \ 
cyrus-sasl-dedad73e5e7a75d01a5f3d5a6702ab8ccd2ff40d.patch.v2

Log message:
security: Remove SHA1 hashes for distfiles

Log message:
*: Convert broken sourceforge HOMEPAGEs back to http

Log message:
all: migrate several HOMEPAGEs to https

pkglint --only "https instead of http" -r -F

With manual adjustments afterwards since pkglint 19.4.4 fixed a few
indentations in unrelated lines.

This mainly affects projects hosted at SourceForce, as well as
freedesktop.org, CTAN and GNU.

Log message:
security: align variable assignments

pkglint -Wall -F --only aligned --only indent -r

No manual corrections.

Log message:
Changed PYTHON_VERSIONS_INCOMPATIBLE to PYTHON_VERSIONS_ACCEPTED; needed for \ 
future Python 3.8

Log message:
Omit mentions of python 34 and 35, after those were removed.

- Includes some whitespace changes, to be handled in a separate commit.