Navigation:
Browse pkgsrc
(this page) 2023-11-09 17:41:16 by Greg Troxel | Files touched by this commit (13) |  |
Log message:
sysutils/ups-nut: Update to 2.8.1
Upstream NEWS, less bugfixes, minor improvements, and developer-facing
changes:
Release notes for NUT 2.8.1 - what's new since 2.8.0
----------------------------------------------------
https://github.com/networkupstools/nut/milestone/8
- "UPS management protocol", Informational RFC 9271 published
by IETF at https://www.rfc-editor.org/info/rfc9271 and the
IANA port number registry was updated accordingly at
\
https://www.iana.org/assignments/service-names-port-numbers/service-names-port-numbers.xhtml?search=3493
(even though this RFC is not formally an Internet Standard)
- NUT documentation files were rearranged, renaming some to `*.adoc` pattern
to facilitate automatic rendering in GitHub and IDE GUIs, and adding recipe
support for GitHub issue/PR links. This `NEWS` file is now proper asciidoc
rendered into `release-notes.pdf` (and HTML versions). [issue #1953, PR #2048]
Internally, the documents would use a new way to define cross-linking to
other pages and their chapters, to facilitate different renderers (including
GitHub UI), and file names created for "chunked HTML" documentation \
format
will no longer have the "chapter number, section number" format which is
not easy to maintain over time with independent builds of documentation
in NUT and the actual and historic snapshots for nut-website for example.
Chapter/Section names will be adapted to produce "chunked HTML" \
file names
instead. Documentation links rendered in GitHub UI should point to the HTML
pages served by a current iteration of the NUT website. [PR #226, PR #669]
- State tree structure and methods (including "dstate" wrapper for common
driver internals) was enhanced with time-stamping of last modification
(setting, changing, deleting the value or some fields in an entry):
this allows to detect stale information in a centralized fashion [#2010]
- nutdrv_qx updates:
* a `battery_voltage_reports_one_pack` driver option was added for devices
which "natively" report a `battery.voltage` for a single battery \
pack or
cell, not for the whole assembly [#1279]
- usbhid-ups updates:
* added support for `subdriver` configuration option, to select the
USB HID subdriver for the device manually where automatic match
does not suffice (e.g. new devices for which no `vendorid`/`productid`
pair was built into any driver, or for different-capability devices
with same interface chips, notably "phoenixtec/liebert" and \
"mge") [#1369]
* added `onlinedischarge_calibration` option for UPSes that report
`OL+DISCHRG` when they are in calibration mode [#2104]
- apc_modbus driver was introduced, to cover the feature gap between existing
NUT drivers for APC hardware and the actual USB-connected devices (or their
firmwares) released since roughly 2010, which deprecated standard USB HID
support in favor of Modbus-based protocol which is used across the board
(also with their network management cards). The new driver can monitor APC
UPS devices over TCP and Serial connections, as well as USB with a patched
libmodbus (check https://github.com/EchterAgo/libmodbus/commits/rtu_usb
for now, PR pending). [#139, #2063]
* For a decade until this driver got introduced, people were advised to
use apcupsd project as the actual program which talks to a device, and
NUT apcupsd-ups driver to relay information back and forth. This was a
limited solution due to lack of command and variable setting support,
as well as relaying of just some readings (just whatever apcupsd exposes,
further constrained by what our driver knows to re-translate), with
little leverage for NUT to tap into everything the device has to offer.
There were also issues on some systems due to packaging (e.g. marking
NUT and apcupsd as competing implementations of the same features) which
required clumsy workarounds to get both installed and running. Finally,
there is a small matter of long-term viability of that approach: last
commits to apcupsd sources were in 2017 (with last release 3.14.14 in
May 2016): https://sourceforge.net/p/apcupsd/svn/HEAD/tree/
- The `upsd` configured to listen on IPv6 addresses should handle only
IPv6 (and not IPv4-mappings) to avoid surprises and insecurity; it
will now warn if a host name resolves to several addresses (and will only
listen on the first hit, as before in such cases) [#2012]
- A definitive behavior for `LISTEN *` directives became specified, to try
handling both IPv4 and IPv6 "any" address (subject to `upsd` CLI options
to only choose one, and to OS abilities). When both address families are
enabled, the `upsd` data server will first try to open an IPv6 socket
asking for disabled IPv4-mapped IPv6 address support (if the OS honors
that), and then an IPv4 socket (which may fail if the IPv6 socket already
covers it anyway); in other words, you can end up with one or two separate
listening sockets. [#2012]
- Numerous daemons (`upsd`, `upsmon`, drivers, `upsdrvctl`, `upssched`)
which accepted `-D` option for debug setting previously, now can also
honour a `NUT_DEBUG_LEVEL=NUM` environment variable if no `-D` arguments
were provided. Unlike those arguments, the environment variable does
not enforce that daemons run in foreground mode by default [#1915]
* Note that unlike some other NUT daemons, `upssched` with enabled
debug does not stop reporting on `stderr`! [#1965]
|
| 2022-11-25 08:45:04 by matthew green | Files touched by this commit (3) |
Log message:
Avoid re-closing a udev that already was closed. Avoids a double-close
that triggers a SEGV in a list-delete operation.
This may actually be the real bug for this code in libusb1.c:
static int nut_libusb_open(libusb_device_handle **udevp,
[ ... ]
#ifndef __linux__ /* SUN_LIBUSB (confirmed to work on Solaris and FreeBSD) */
/* Causes a double free corruption in linux if device is detached! */
as the same double-free list issue occurs here.
|
| 2022-06-28 13:38:00 by Thomas Klausner | Files touched by this commit (3952) |
Log message: *: recursive bump for perl 5.36 |
| 2022-04-27 01:28:26 by Greg Troxel | Files touched by this commit (14) | |
Log message:
sysutils/ups-nut-*: Update to 2.8.0
Tested on NetBSD 9 amd64 with a UPS that's more than 4 times older
than nut 2.7.4!
Upstream NEWS:
Release notes for NUT 2.8.0 - what's new since 2.7.4:
NOTE: Earlier discussions (mailing list threads, GitHub issues, etc.) could
refer to this change set (too long in the making) as NUT 2.7.5.
- New (optional) keywords for configuration files were added,
so existing NUT 2.7.x builds would not accept them if some
deployments switch versions back and forth -- due to this,
semantically the version was bumped to NUT 2.8.x.
- Add support for openssl-1.1.0 (Arjen de Korte)
- libusb-1.0 API support in addition to libusb-0.1 API [#300]
- Add support for `DISABLE_WEAK_SSL=true` in upsd.conf to disable older/weaker
SSL/TLS protocols and ciphers: when NUT is built against relatively recent
versions of OpenSSL or NSS it will be restricted to TLSv1.2 or better.
For least-surprise, currently defaults to `false` and complains in log
[PR #1043]
- Add support for `ALLOW_NO_DEVICE=true` (as an upsd.conf flag or environment
variable passed from caller of the program), to allow starting the data
server initially without any device configurations and reloading it later
to apply config changes on the fly [PR #766]
- Add support for `debug_min=NUM` setting (ups.conf, upsd.conf, upsmon.conf)
to specify the minimum debug verbosity for daemons. This allows \
"in-vivo"
troubleshooting of service daemons without editing init scripts or service
unit definitions.
- Improve support for upsdrvctl for managing of numerous device configs,
including default "maxretry=3" and a "nowait" option to \
complete the
"start of everything" mode after triggering the drivers and not waiting
for them to complete initializing. This matters on systems that monitor
from dozens to hundreds of devices.
- Drivers support a new value for `synchronous` setting, which is the
new default now: `auto`. Initially after driver start-up this mode
acts as the older default `off`, but would fall back to `on` in case
the driver fails to send reports to `upsd` by overflowing the socket
buffer in async mode -- so the next connections of this driver uptime
would be synchronized (potentially slower, but safer -- blocking on
writes to the data server). This adaptation would primarily impact
and benefit devices with many (hundreds of) data points, such as
ePDUs and daisy chains. [issue #1309, PR #1315]
- Daemons such as upsd, upsmon, upslog, and device drivers previously
implied that enabled debugging (or upslog to stdout) means foreground
running, otherwise the daemon was always sent to the background.
Now there are explicit options for this (`-F`/`-B`), although default
behavior is retained. This change is used for simplified service unit
definitions.
- Improvements for device discovery or driver "lock-picking", including
general support for:
* "Standalone" mode (`-s` option), to monitor a device which is not
detailed or mentioned in ups.conf
* `NUT_ALTPIDPATH` and `NUT_STATEPATH` environment variables to override
the paths built into the driver binary [PR #473 and #507]
* "Driver data dump" mode (`-d` option), to poll a device for one or
few ('update_count' ) loops, report discovered values (dump the data
tree in upsc-like format), and exit. This complements the `nut-scanner`
for finding and identifying devices.
- support for new devices:
* IBM 6000 VA LCD 4U Rack UPS; 5396-1Kx (USB)
* Phoenix Contact QUINT-UPS model 2320461 (Modbus)
* Tripp-Lite SU3000LCD2UHV (USB; protocol 1330)
* Emerson Avocent PM3000 PDU (SNMP)
* HPE ePDU (SNMP)
- nutdrv_qx: enhanced estimation of remaining battery runtime based
on speed of voltage drop, which varies as they age [PR #1027]
- nutdrv_qx: several subdrivers added or improved, including:
* "snr" subdriver with USB connection, for SNR-UPS-LID-XXXX [PR #1008].
Note that end-users should reference explicitly the `snr` subdriver
in their `ups.conf` settings because of USB chip using the same
values of VendorID/ProductID as fabula_subdriver, fuji_subdriver,
and krauler_subdriver.
* "hunnox" subdriver, as a dialect of earlier "fabula" \
[PR #638]
adds support for Hunnox HNX-850 with USB connection and reported to work
for Powercool, Iron Guardian, ARES devices and possibly many others from
discussions linking to the pull request which introduced the driver.
* "phoenixtec" subdriver for Masterguard A and E series, device series
A700/1000/2000/3000(-19) and E40/60/100(-19). [PR #975]
* "ablerex" subdriver provided by the OEM vendor, note that it replaces
"krauler_subdriver" as default handler for VID:PID 0xffff:0x0000
[PR #1135]
* Legrand HID defined and handled by "krauler_subdriver" by default
[PR #1075, issue #616]
* add new "armac" subdriver, tested with Armac R/2000I/PSW, but should
support other UPSes that work with "PowerManagerII" software from
Richcomm Technologies from around 2004-2005 [PR #1239, issue #1238]
- microsol-apc (starting at version 0.68 as derived from solis 0.67):
adding support for newer APC Back-UPS BR hardware, such as
APC Back-UPS BZ1500, BZ2200BI and BZ2200I [PR #994]
- pijuice: added new i2c bus driver for PiJuice HAT, a battery UPS module
for the Raspberry Pi systems [PR #730]
- huawei-ups2000: added new driver for USB (Linux 5.12+ so far) and Serial
RS-232 Modbus device support of Huawei UPS2000/2000A (1kVA-3kVA) series,
and possibly some related FSP UPS models. [PR #954]
- socomec_jbus: added new driver for modbus-based JBUS protocol over serial
RS-232 for Socomec UPS (tested with a DIGYS 3/3 15kVA model, working
on Linux x86-64 and Raspberry Pi 3 ARM). [PR #1313]
- adelsystem_cbi: added new driver for ADELSYSTEM CBI2801224A, an all-in-one
12/24Vdc DC-UPS, which supports the modbus RTU communication protocol
[PR #1282]
- generic_modbus: added new driver for TCP and Serial Modbus device support.
The driver has been tested against PULS UPS (model UB40.241) via
MOXA ioLogikR1212 (RS485) and ioLogikE1212 (TCP/IP), and configuration
allows to map custom registers and addresses to NUT events [PR #1052]
- genericups: added support for FTTx battery backup devices, and new signal
type mappings for the contact closure pins interpretation (RB for replace
battery, BYPASS for disconnected battery, and "none" or NULL for signals
to ignore) [PR #1061]
- add devices to HCL/DDL:
* APC Back-UPS CS (USB)
* CPS CP1500EPFCLCD (USB)
* CPS EC350G, EC750G (USB)
* CPS PR2200LCDRT2U (SNMP)
* Eaton ATS 16 and 30 (SNMP)
* Eaton 5E2200VA (USB)
* Eaton 9PX Split Phase 6/8/10 kVA (XML/USB/SHUT)
* Eaton 9PX (XML/USB/SHUT)
* Eaton Ellipse PRO 650 VA (USB)
* Ippon Back Comfo Pro II 650/850/1050 (USB)
* Numeric Digital 800 (USB)
* Opti-UPS PS1500E (USB)
* Powercool 350VA to 1600VA (USB)
- C++11 support in nutclient library and cppunit tests
- Added C++ testing mock for TcpClient class (nutclientmem/MemClientStub:
data stored in local memory) [PR #1034]
- Dual Python 2 and 3 compatibility in development scripts; ability to
run build activities and resulting built NUT programs on systems that
do not have a binary named "python" [PR #1115 and some before it]
- Added Russian translation for NUT-Monitor GUI client [PR #806]
- Separated NUT-Monitor UI into two applications, NUT-Monitor-py2gtk2 and
NUT-Monitor-py3qt5, suitable for two generations of Python ecosystem
with their great differences; `NUT-Monitor` name is retained for wrapper
script which calls one of these, such that the current system can execute
[PRs #1310, #1354]
- Various USB driver families: expanded device-matching with "device" in
addition to "bus" and generic USB fields. This is needed to support
multiple attached devices that seem identical by other fields (e.g.
same vendor, same model, same USB bus, and no serial number) [PR #974]
- Various USB driver families: Improved HID parsing for byte-stream to
number conversions on different CPU architectures [PR #1024]
- Various USB HID driver families: added support for composite devices
utilizing interface greater than 0 for the UPS interface [PR #1044]
- usbhid-ups:
* added generic framework for fixing Report Descriptors which can be
used for different manufacturers by adding code to the appropriate
subdriver rather than polluting the main code with UPS specific
exceptions, and applied fixes for known mistakes in (some releases
of firmware for) CyberPower CPS*EPFCLCD [issue #439, PR #1245]
* added `onlinedischarge` option for UPSes that report `OL+DISCHRG`
when wall power is lost [PR #811]
* changed detection of VendorID 0x06da handling of which is claimed
by Liebert/Phoenixtec HID historically, and MGE HID (for AEG PROTECT
NAS UPSes) since NUT 2.7.4, so that the higher-priority MGE subdriver
would not grab each and all of the devices exposing that ID [PR #1357]
* CPS HID: add input.frequency and output.frequency
* OpenUPS2: only check OEM Information string once (fewer log messages)
* Liebert GXT4 USB VID:PID [10AF:0000]
* add battery voltage and input/output transfer voltage and frequency
in Liebert/Phoenixtec HID mapping, to support PowerWalker VFI 2000 TGS
better [PR #564, issue #560]
* add a little delay between multicommands [PR #1228]
* fix Eaton/MGE mapping for beeper handling
* add IBM USB VID
* add deep battery test for CyberPower OL3000RMXL2U
* report the libusb version used
* fixed CPU architecture dependent bitmask math issues, causing wrong
numbers interpreted from wire protocol data in Big-Endian LP64 builds
(SPARC64, s390x, etc.) [issue #1023, PRs #1024, #1040, #1055, #1226]
* add Delta UPS Amplon R Series, tested on R1K and R3K model [PR #987]
* add Delta Minuteman UPS VID/PID [PR #1230, issues #555 and #1227]
* add AMETEK Powervar UPM [PR #733]
* add Tripplite AVR750U (ProductID 0x3024) [PR #963]
* add Arduino HID device support with new arduino-hid subdriver [PR #1044]
* add new salicru-hid subdriver, tested with Salicru SPS Home 850 VA
[PR #1199, issue #732]
* add new ever-hid subdriver to support EVER UPS devices (Sinline RT Series,
Sinline RT XL Series, ECO PRO AVR CDS Series) [PR #431]
* add ability to set `battery.mfr.date` for APC HID UPS [PR #1318]
- usbhid-ups / mge-shut: compute a realpower output load approximation for
Eaton UPS when the needed data is not present
- snmp-ups:
* APC ePDU MIB support
* add `input.phase.shift` variable
* add configurable write-able `ondelay` (`ups.delay.start`) and `offdelay`
(`ups.delay.shutdown`) as timeticks support [PR #276]
* outlet groups
* fix the rounding / truncation of some values
* add outlet.N.name for Eaton ePDU
* add input.bypass.frequency for Eaton 3ph
* fix support for Eaton 2-phase ("split phase") UPS
* add flag to list currently loaded MIB-to-NUT mappings
* fix input.L2.voltage on Eaton G2/G3 PDU
* update Eaton Aphel Revelation MIB
* support Raritan Dominion PX2 PDU
* support Emerson Avocent PM3000 PDU
* improve ALARM flag handling
* add firmware version for new HPE Network card
* add ups.load, battery.charge, input.{voltage,frequency} and output.voltage
for CyberPower, as well as shutdown and other instant commands
* several rounds of updates for Eaton devices, including new ATS and ePDU
hardware families
* fixed bit mask values for flags to surely use different numbers behind
logical items (inevitably changing some of those macro symbols) [PR #1180]
- snmp-ups and nut-scanner should now support more SNMPv3 Auth and Priv
protocols, as available at NUT build time [PRs #1165, #1172]
- nut-scanner: various improvements, including:
* detection of libraries at runtime
* tracing information
* limiting parallelism (thread count) [PRs #1158, #1164]
- nut-ipmipsu: improve FreeIPMI support to build cleanly against older and
newer FreeIPMI versions [PR #1179]
- the powerpanel driver now also supports CyberPower OR1500LCDRTXL2U with
serial cable [PR #538]
- powercom driver: implement `nobt` config parameter to skip battery check
on initialization/startup [PR #1256]
- netxml-ups:
* Report calibration status
* Fix for erroneous battery info (MGEXML/0.30) [PR #1069]
- solis: various improvements and fixes
- liebert-esp2: Correct battery V scaling, update docs, implement split-phase
unit support [PR #412]
- tripplite: the "Tripp-Lite SmartUPS driver" as tested with SMART2200NET
learned to discover the firmware generation and some device features,
and in particular to manage power separately on one or two outlet groups
[PR #1048]
- tripplite_usb: updated to recognize the "3005" protocol [PR #584]
- libnutclient: introduce getDevicesVariableValues() to improve performances
when querying many devices (up to 15 times faster)
- nut-driver-enumerator: introduced a script for Linux systemd and
Solaris/illumos SMF to inspect current NUT configuration in ups.conf
file and generate service management instances for each currently
tracked power device. Also introduced services to monitor the NUT
configuration and react to editions of this file, mostly intended
for deployments that do massive monitoring of dynamically changing
farms of power devices.
- Fix File descriptors leaks by upsmon and upssched (SELinux errors)
- systemd support improvements:
* POWEROFF_WAIT
* reload support for upsd
* Deliver systemd-tmpfiles config to pre-create runtime locations
[PR #1037 for Issue #1030]
* Update units with SyslogIdentifier=%N for better logging [PR #1054]
- upsrw: display the variable type beside ENUM / RANGE
- Added `PROTVER` as alias to `NETVER` to report the protocol version in use.
Note that NUT codebase itself does not use this value and handles commands
and reported errors individually [issue #1347]
- Implement status tracking for instant commands (instcmd) and variables
settings (setvar): this allows to get the actual execution status from the
driver, and is available in libraries and upscmd / upsrw [PR #659]
- Add support for extra parameter for instant commands, both in library and
in upscmd
- dummy-ups can now specify `mode` as a driver argument, and separates the
notion of `dummy-once` (new default for `*.dev` files that do not change)
vs. `dummy-loop` (legacy default for `*.seq` and others) [issue #1385]
- new protocol variables:
* `input.phase.shift`
* `outlet.N.name`
* `outlet.N.type`
* `battery.voltage.cell.max`, `battery.voltage.cell.min`
* `battery.temperature.cell.max`, `battery.temperature.cell.min`
* `battery.status`
* `battery.capacity.nominal`
* `battery.date.maintenance` (and clarified purpose of `battery.date`)
* `battery.packs.external` (and clarified purpose of `battery.packs`)
* `experimental.*` namespace introduced [PR #1046] to facilitate
introduction of NUT drivers and their data points for which we do
not yet have concepts, or which the original driver contributors
did not map well per suitable NUT standards: this allows to balance
having those drivers available in the project vs. least surprise
for when the explicitly experimental names are changed to something
stable and standardized.
* Proposed to track Date and Time values (still as "opaque strings")
preferably in representations compatible to ISO-8601/RFC-3339 [PR #1076]
(standards update; changes to actual codebase to be applied in the future)
** New routine to convert a US formatted date string "MM/DD/YYYY" to an
ISO 8601 Calendar date "YYYY-MM-DD" was added to snmp-ups.c [PR \
#1078]
- Master/Slave terminology was deprecated in favor of Primary/Secondary
modes of `upsmon` client:
* Respective keywords in the configuration files (`upsd.users` and
`upsmon.conf`) are supported as backwards-compatible settings,
but the obsoleted values are no longer documented.
* Protocol keyword support was similarly updated, with `upsmon` now
first trying to elevate privileges with `PRIMARY <ups>` request,
and falling back to `MASTER <ups>` just in case it talks to an
older build of an `upsd` server.
* For the principle of least surprise, NUT codebase still exposes the
`net_master()` (as handler for `MASTER` net command) in header and
C code for the sake of existing linked binaries, and returns the
`OK MASTER-GRANTED` line to the older client that invoked it.
* Newly introduced `net_primary()` (as handler for `PRIMARY` net command)
calls the exact same application logic, but returns `OK PRIMARY-GRANTED`
line to the client.
* Python binding updated to handle both cases, as the only found in-tree
protocol consumer of the full-line text.
* For more details see issue #840 and several pull requests referenced
from it, and discussions on NUT mailing lists.
- Build fixes:
* In general, numerous fixes were applied to ensure portability and avoid
warnings (fixing a number of real bugs that caused them); CI was extended
to keep the codebase free of those types of warnings which we have got
rid of, requiring builds to succeed cleanly in several dozen combinations
of compiler versions, C standard revisions (C99 upwards, though on many
OSes with GNU99+ extensions), operating systems and CPU architectures.
* Public CI introduced to automatically test every contribution (PR) and
resulting increment of main NUT codebase, including Travis CI and LGTM.com
services, and a Jenkins farm on virtual hardware donated by Fosshost.org;
this augments testing earlier provided for some branches by Buildbot.
* Added cppunit testing with valgrind for the C++ client library
* Make targets added for shell script syntax checks for helper and service
scripts
* Make targets added for spellcheck and for maintenance of the dictionary,
including incremental spellcheck to only parse recently edited text files
* The AsciiDoc detection has been reworked to allow NUT to be built from
source without requiring asciidoc/a2x (using pre-built man pages from
the distribution tarball, for instance)
* Makefile contents rearranged for more resilient out-of-tree and in-tree
builds beside those made from the root workspace directory
* Makefiles are tested with GNU Make and BSD Make to ensure portable recipes
* More use of `pkg-config` to detect dependencies at configure time, as
well as fail-safe detection of presence of pkg-config (and its macros)
to survive and build without it too
* "slibtool" pedantic nuances now supported, allowing an alternative to
GNU libtool
* Build scripts updated to remove obsoleted calls to cleanly work with
autoconf-2.70 releases in 2020 (also works with 2.69 which was the
earlier release since 2012)
* Dynamic library loading used in certain programs and use-cases improved,
especially for 64-bit vs 32-bit builds on multiple-bitness OSes
* Logging routines like `upsdebugx()` were refactored as macros so there
is slightly less overhead when logging is disabled [PRs #685 and #1100]
* Numerous classes of compilation warnings eradicated, many of those being
potential issues with implicit data type conversions and varied numeric
type width, signedness, string buffer size, uninitialized variables or
structure fields; some more in progress
* Several logical errors found and fixed during this walk over codebase.
* Cases where compilers were overly zealous and particular code was written
the way wit was intentionally, including some comparisons that help with
different-bitness builds but indeed seem superfluous in a certain single
bitness, were commented and encased in pragmas to disable the warnings
* Basic coding style (indentations, lack of trailing white space) applied
per developer guide, but not automatically enforced/checked yet.
- Due to changes needed to resolve build warnings, mostly about mismatching
data types for some variables, some structure definitions and API signatures
of several routines had to be changed for argument types, return types,
or both. Primarily this change concerns internal implementation details
(may impact update of NUT forks with custom drivers using those), but a
few changes also happened in header files installed for builds configured
`--with-dev` and so may impact `upsclient` and `nutclient` (C++) consumers.
At the very least, binaries for those consumers should be rebuilt to remain
stable with NUT 2.8.0 and not mismatch int-type sizes and other arguments.
- As usual, more bugfixes, cleanup and improvements, on both source code
and documentation.
|
| 2022-04-18 21:49:18 by matthew green | Files touched by this commit (3) |
Log message: fix a ups-nut-usb crash. from the patch file: As comm_driver->get_interrupt() can return larger than the buffer size, limit the future accesses by this amount. Bump the size of the buffer here as returns as high as 3500 have been seen. bump ups-nut-usb revision. with this, i am able to monitor a recent CyberPower UPS. |
| 2021-05-24 21:56:06 by Thomas Klausner | Files touched by this commit (3575) |
Log message: *: recursive bump for perl 5.34 |
| 2021-02-11 11:05:14 by Thomas Klausner | Files touched by this commit (6) |
Log message: ups-nut*: add options.mk for SSL support Enable nss backend by default. openssl backend only supports OpenSSL 1.0, so disabled for now. Bump PKGREVISION. From Edgar Fuß. |
| 2020-05-10 16:12:33 by Roland Illig | Files touched by this commit (2) |
Log message: sysutils/ups-nut-*: suppress USE_TOOLS+=perl warning |
| 2018-09-21 02:59:53 by Jean-Yves Migeon | Files touched by this commit (12) | |
Log message:
Update nut to 2.7.4 (from 2.6.5).
Notable changes:
* GPLv2 or GPLv3 as license;
* c++ lang addition;
* upsdrvctl moved from libexec/ to sbin/ (thanks systemd), reflect this change
in rc.d script;
* the timeout patch (patch-ab) has been implemented differently, but an
error message has been left out. Move it to patch-snmp-error-msg.c;
* tiff buildlink3 for ups-nut-cgi required (in addition to gd).
Changelog: (lengthy -- if truncated please refer to):
http://www.networkupstools.org/source/2.7/ChangeLog
2016-03-09 Arnaud Quette <arnaud.quette@free.fr>
* configure.ac: Fix autoreconf on Debian For some reason, Automake
doesn't search the current directory correctly when searching for
helper scripts, when 'nut' is running as a git-submodule, as it is
the case with the website repository
* configure.ac: update version to 2.7.4
* drivers/apc-ats-mib.c: snmp-ups: add APC ATS input.source
* drivers/snmp-ups.c: snmp-ups: fix the matching OID tests For both
sysOID and classic methods, we used to test one of the two OIDs
provided in the mib2nut structures. However, these two OIDs
(oid_pwr_status and oid_auto_check) tend to be redundant and
confusing. Replace these matching by an extraction of
{ups,device}.model
* drivers/nut-libfreeipmi.c: nut-ipmipsu: fix compilation warnings
* NEWS, UPGRADING, docs/FAQ.txt, docs/net-protocol.txt, docs/new-
drivers.txt, docs/nut-names.txt, docs/nutdrv_qx-subdrivers.txt,
docs/packager-guide.txt, docs/snmp-subdrivers.txt, lib/README,
scripts/augeas/README: Fix spelling and typo errors Following the
spell-checking scope expansion, do a spell-checking pass
* docs/documentation.txt: Update documentation as per the new devices
scope
* docs/features.txt, docs/user-manual.txt: Update documentation as
per the new devices scope
* docs/Makefile.am: Expand spell-checking scope Add more documents,
outside of the docs/ directory Closes:
https://github.com/networkupstools/nut/issues/222
2016-03-08 Arnaud Quette <arnaud.quette@free.fr>
* configure.ac, tools/Makefile.am, tools/driver-list-format.sh: Check
driver.list[.in] format at make dist time Instead of checking
driver.list.in at configure time, move the checking and
modification into a script that is called at make dist time. The
script can also be called manually, and will try to fix both
driver.list.in and driver.list
2016-03-07 Arnaud Quette <arnaud.quette@free.fr>
* drivers/powerware-mib.c: Remove an erroneous test This was made
test the enumerated values registration in snmp-ups, and should not
have been committed
* data/driver.list.in: HCL: APC ATS AP7724 supported by snmp-ups
These Automatic Transfer Switch should be supported by snmp-ups,
however this was not tested at all Reference:
https://github.com/networkupstools/nut/issues/260
* NEWS, UPGRADING: Update for release 2.7.4
* drivers/Makefile.am, drivers/apc-ats-mib.c, drivers/apc-ats-mib.h,
drivers/snmp-ups.c: snmp-ups: support APC Automatic Transfer Switch
Following the recent extension of NUT scope and variable namespace,
to support Automatic Transfer Switch (ATS), implement SNMP support
for APC ATS (with help from "maaboo" through github) Reference:
https://github.com/networkupstools/nut/issues/260
2016-03-04 Arnaud Quette <arnaud.quette@free.fr>
* drivers/baytech-mib.c, drivers/bestpower-mib.c, drivers/compaq-
mib.c, drivers/cyberpower-mib.c, drivers/eaton-mib.c, drivers/mge-
mib.c, drivers/netvision-mib.c, drivers/powerware-mib.c, drivers
/raritan-pdu-mib.c: snmp-ups: fix mib2nut structures Non existent
OIDs, for testing MIB selection, must be expressed as NULL and not
as empty string ("") for the algorithm to work
2016-03-03 Daniele Pezzini <hyouko@gmail.com>
* docs/download.txt: docs: update several download links
2016-03-03 Arnaud Quette <arnaud.quette@free.fr>
* docs/man/upsrw.txt, docs/net-protocol.txt: Clarification on NUMBER
type float values Clarify a bit more documentation on how to
express float values, when using upsrw. That is to say, using
decimal (base 10) english-based representation, so using a dot, in
non-scientific notation. So hexadecimal, exponents, and comma for
thousands separator are forbiden
* clients/upsrw.c, docs/net-protocol.txt, server/netget.c: Prefer
NUMBER to NUMERIC for variable type As per discussion on the
Github pull request, NUMBER would be more suitable than NUMERIC
2015-11-22 Daniele Pezzini <hyouko@gmail.com>
* drivers/nutdrv_qx.c: nutdrv_qx: increase timeouts in 'sgs' USB
subdriver Apparently the previously used timeouts in the 'sgs' USB
subdriver were not always enough, so increase them.
2015-11-11 Daniele Pezzini <hyouko@gmail.com>
* data/driver.list.in: HCL: various TS Shara UPSes supported by
nutdrv_qx Protocol: 'megatec' USB subdriver: 'sgs'
* drivers/nutdrv_qx.c: nutdrv_qx: make sure 'sgs' USB subdriver uses
only what it reads Since, in 'sgs' USB subdriver, we read only 8
bytes at a time and we expect the first byte to tell us the length
of the data that follows, make sure we don't use more than what we
read from the device in case the first byte is not what we expect
it to be.
2015-03-04 Daniele Pezzini <hyouko@gmail.com>
* drivers/nutdrv_qx.c: nutdrv_qx: increase verbosity of 'sgs' USB
subdriver In 'sgs' USB subdriver: - be more verbose when
debugging, - always print the return code when dealing with an
error.
2014-01-31 Daniele Pezzini <hyouko@gmail.com>
* docs/man/nutdrv_qx.txt: nutdrv_qx: update man page for new 'sgs'
USB subdriver
2014-01-31 Ronaldo Yamada <rhyamada@gmail.com>
* drivers/nutdrv_qx.c: nutdrv_qx: add new 'sgs' USB subdriver to
support TS Shara units
2016-03-02 Arnaud Quette <arnaud.quette@free.fr>
* data/driver.list.in: HCL: added Eaton Powerware 9125-5000g
Supported with the additional USB card, with the bcmxcp_usb driver
* docs/man/upsrw.txt, docs/net-protocol.txt: Clarification on NUMERIC
type float values Clarify documentation on how to express float
values, when using upsrw. That is to say, using decimal english-
based representation, so using a dot
* drivers/mge-xml.c: netxml-ups: fix Eaton XML published data Some
raw protocol data were wrongly published, and are now commented.
Also add some R/W flags to ambient thresholds Closes:
https://github.com/networkupstools/nut/issues/201
* tools/nut-scanner/nut-scanner.c: nut-scanner: fix thread attachment
Add a test to have the right thread waiting for the scan to be
complete (patch from Michal Hlavinka, Red Hat)
* configure.ac, tools/nut-scanner/nutscan-init.c, tools/nut-
scanner/scan_avahi.c, tools/nut-scanner/scan_ipmi.c, tools/nut-
scanner/scan_nut.c, tools/nut-scanner/scan_snmp.c, tools/nut-
scanner/scan_usb.c, tools/nut-scanner/scan_xml_http.c: nut-scanner:
don't depend on development libraries nut-scanner was previously
trying to use directly libXXX.so (libusb-0.1, libfreeipmi,
libnetsnmp, libavahi-client, libneon, libupsclient}. However, these
files are generally provided by the development packages. nut-
scanner now tries to look at some known paths, including the one
provided through --libdir, to find the correct libraries Closes:
https://github.com/networkupstools/nut/issues/233
2016-03-01 Arnaud Quette <arnaud.quette@free.fr>
* clients/upsrw.c, docs/net-protocol.txt, server/netget.c: Default to
type NUMERIC for variables Any variable that is not STRING, RANGE
or ENUM is just a simple numeric value. The protocol documentation
(net-protocol.txt) was previously stating that "The default <type>,
when omitted, is integer." which was not fully true, since a
variable could also be a float. Hence, the wording was changed to
advertise this, and that each driver is then responsible for
handling values as either integer or float. Moreover, instead of
returning a TYPE "UNKNOWN", return "NUMERIC", which is more
suitable, and aligned with the NUT protocol specification
* tools/nut-snmpinfo.py: SNMP subdriver generator: fix output
formatting
* tools/nut-snmpinfo.py: SNMP subdriver generator: discard commented
lines Discard any commented mib2nut_info_t declaration, which
should thus not be taken into account
2016-02-26 Arnaud Quette <arnaud.quette@free.fr>
* data/driver.list.in, drivers/Makefile.am, drivers/eaton-ats-mib.c,
drivers/eaton-ats-mib.h, drivers/snmp-ups.c: snmp-ups: support
Eaton Automatic Transfer Switch Following the recent extension of
NUT scope and variable namespace, to support Automatic Transfer
Switch (ATS), implement SNMP support for Eaton ATS. Note that this
device can also be supported through Eaton XML/PDC (XML over HTTP)
protocol, supported by the NUT netxml-ups driver
* data/cmdvartab, docs/nut-names.txt: Extend namespace for Automatic
Transfer Switch (ATS) Extend NUT namespace to support a new type
of power device: ATS - Automatic Transfer Switch. These devices
are used to setup 2 power systems, such as UPS, to power a single
power supply system, and be able to automatically transfer between
the input sources in case of failure of the primary one. The added
variable are for now limited to 'input.source' and
'input.source.preferred', but may be extended if needed
2016-02-25 C Fraire <cfraire@me.com>
* docs/scheduling.txt: Fix docs location of upssched to sbin
2016-02-25 Arnaud Quette <arnaud.quette@free.fr>
* scripts/subdriver/gen-snmp-subdriver.sh: snmp-ups: add the last
missing element in the structure
* drivers/apc-mib.c, drivers/bestpower-mib.c, drivers/compaq-mib.c,
drivers/cyberpower-mib.c, drivers/delta_ups-mib.c, drivers/huawei-
mib.c, drivers/ietf-mib.c, drivers/mge-mib.c, drivers/netvision-
mib.c, drivers/powerware-mib.c, drivers/xppc-mib.c,
scripts/subdriver/gen-snmp-subdriver.sh: snmp-ups: fix values
lookup terminating element The terminating element should really
be NULL, and not the string "NULL", as it was originally done, back
in 2002
* drivers/snmp-ups.c: snmp-ups: revert order of the NULL/"NULL" test
Fix a segfault when doing first the string comparison test
* drivers/snmp-ups.c: snmp-ups: register values enumerations
Whenever there is a values lookup structure for read/write data,
push the values as enumerations for upsrw
* drivers/snmp-ups.c: snmp-ups: try to lookup values for numeric
elements Numeric elements can also use the value resolution
mechanism
* drivers/snmp-ups.c: snmp-ups: counter test sysOID with a test OID
Some devices have buggy sysOID exposed. Allow to counter test
another OID, to be able to select between different mapping
structures
2016-02-24 Arnaud Quette <arnaud.quette@free.fr>
* scripts/subdriver/gen-snmp-subdriver.sh: SNMP subdriver creation
script: allow sysOID override Allow to use -s to override buggy
sysOID in some device FW. In this case, the sysOID entry in the
mib2nut structure should be set to NULL
2016-02-11 Arnaud Quette <arnaud.quette@free.fr>
* drivers/raritan-pdu-mib.c: snmp-ups: fix macaddr support for
Raritan PDU Raritan MIB was fixed to expose macaddr on
device.macaddr instead of ups.macaddr
* drivers/baytech-mib.c: snmp-ups: fix macaddr support for Baytech
PDU Baytech MIB was fixed to expose macaddr on device.macaddr
instead of ups.macaddr
* drivers/eaton-mib.c: snmp-ups: fix and complete macaddr support for
Eaton Eaton G2 and G3 can now expose the MAC address of the
device, using device.macaddr. Eaton G1 Aphel was fixed to expose
this data on device.macaddr instead of ups.macaddr
* drivers/snmp-ups.c: snmp-ups: add support for hexadecimal octet
strings
* drivers/snmp-ups.c: snmp-ups: fallback for classic MIB detection
If the sysOID matching has failed, then snmp-ups uses ups.model to
get an OID to test. In case ups.model is not available, fallback to
trying to use device.model instead
* docs/images/nut_layering.png, docs/images/nut_layering.svg: Refresh
and complete NUT architecture diagram
2016-02-08 Arnaud Quette <arnaud.quette@free.fr>
* drivers/powerware-mib.c: snmp-ups: extend Eaton 3ph outputSource
values map Add the new status values for xupsOutputSource
(.1.3.6.1.4.1.534.1.4.5.0), that maps to both ups.status and
ups.type
2016-02-03 Arnaud Quette <arnaud.quette@free.fr>
* drivers/powerware-mib.c: snmp-ups: improve support for Eaton 3ph
Improve support for temperature and humidity data, including: -
ups.temperature now available - fixing ambient.temperature
(previously pointing at a wrong OID) - ambient.humidity now
available - the following settings now available: *
ups.temperature.low * ups.temperature.high * ambient.humidity.high
* ambient.humidity.low * ambient.temperature.high *
ambient.temperature.low
2016-02-01 Daniele Pezzini <hyouko@gmail.com>
* data/driver.list.in: HCL: various APCUPSD-controlled APC devices
via apcupsd-ups Originally reported by GitHub user @Thermionix.
Reference: https://github.com/networkupstools/nut/pull/215
2016-01-31 Charles Lepple <clepple+nut@gmail.com>
* docs/man/nutdrv_atcl_usb.txt: man/nutdrv_atcl_usb: point to
nutdrv_qx (fuji) for 0001:0000 Also update best guess for the USB-
to-serial converter situation.
* docs/FAQ.txt: FAQ: udevadm for fixing permissions
2016-01-30 Charles Lepple <clepple+nut@gmail.com>
* drivers/nut-libfreeipmi.c: FreeIPMI: do not split function
arguments with a conditional Alternate approach to suggestion by
Romero B. de S. Malaquias Closes:
https://github.com/networkupstools/nut/pull/250
2016-01-24 Charles Lepple <clepple+nut@gmail.com>
* docs/config-notes.txt: Documentation: fix formatting Put syntax
examples in verbatim mode, and remove spaces from ends of lines.
* drivers/apc-hid.c: usbhid-ups: handle missing USB strings in APC
code Closes: https://github.com/networkupstools/nut/issues/258
Might fix:
https://bugs.launchpad.net/ubuntu/+source/nut/+bug/1483615
2016-01-23 Charles Lepple <clepple+nut@gmail.com>
* data/driver.list.in: HCL: added NHS Laser Senoidal 5000VA Source:
http://article.gmane.org/gmane.comp.monitoring.nut.devel/7123
Closes: https://github.com/networkupstools/nut/issues/254
2016-01-14 Arnaud Quette <arnaud.quette@free.fr>
* drivers/snmp-ups.c: snmp-ups: fix staleness detection With some
ePDUs or devices using template for outlet and outlet.group,
communication loss with the device were not detected, due to the
handling mechanism. Simply skipping commands for templates, after
the init time, is sufficient to avoid this issue
2016-01-05 Arnaud Quette <arnaud.quette@free.fr>
* drivers/snmp-ups.c: snmp-ups: improve stale communication recovery
Disable the 10 iterations to retry communicating with stale device.
This was leading up to 10 x 30 seconds, so 5mn, before being able
to get data again
* docs/new-drivers.txt, docs/nut-names.txt: Document
battery.charger.status This will in time replace the historic CHRG
and DISCHRG flags published in ups.status. Closes
https://github.com/networkupstools/nut/issues/196
2016-01-03 Charles Lepple <clepple+nut@gmail.com>
* data/driver.list.in: HCL: Sweex model P220 via blazer_usb
Reference: https://github.com/networkupstools/nut/issues/251
2016-01-04 Arnaud Quette <arnaud.quette@free.fr>
* drivers/ietf-mib.c, drivers/ietf-mib.h, drivers/snmp-ups.c: snmp-
ups: add support for Tripplite units on IETF mib These devices
expose ".1.3.6.1.4.1.850.1", which could be supported through this
specific MIB. For now, just link that to the IETF MIB, to provide
a first level of support Reference:
https://github.com/networkupstools/nut/issues/171
2015-12-30 Arnaud Quette <arnaud.quette@free.fr>
* configure.ac: First stab at checking driver.list.in format
2015-12-29 Charles Lepple <clepple+nut@gmail.com>
* scripts/upower/95-upower-hid.rules: upower: update for AEG
2015-12-29 Arnaud Quette <arnaud.quette@free.fr>
* drivers/powercom.c: Fix the processing of output voltage for KIN
units The processing of output voltage requires to also take into
account the line voltage, as reported by Patrik Dufresne. This may
still need some further adjustments Reference:
https://github.com/networkupstools/nut/issues/187
* drivers/powercom.c: Fix the processing of input voltage for KIN
units The processing of input voltage requires to also take into
account the line voltage, as reported by Patrik Dufresne. Also bump
the driver version to 0.16, since 0.15 was already used, but not
set Reference: https://github.com/networkupstools/nut/issues/187
* drivers/mge-hid.c: Fix letter case for AEG USB VendorID The letter
case of this VendorID may be important for generated files, such as
the udev ones (reported by Charles Lepple)
2015-12-28 Arnaud Quette <arnaud.quette@free.fr>
* data/driver.list.in, drivers/mge-hid.c: HCL: AEG PROTECT B / NAS
supported by usbhid-ups Reference:
https://github.com/networkupstools/nut/issues/249
2015-12-17 Daniele Pezzini <hyouko@gmail.com>
* data/driver.list.in: HCL: Legrand Keor Multiplug supported by
nutdrv_qx Reference:
https://github.com/networkupstools/nut/issues/248
2015-12-09 Andrey Jr. Melnikov <temnota.am@gmail.com>
* drivers/bcmxcp_usb.c: Don't call usb_close() after reset
2015-12-08 Andrey Jr. Melnikov <temnota.am@gmail.com>
* drivers/bcmxcp_usb.c: Call usb_reset() when driver unable to claim
device
* drivers/bcmxcp.h, drivers/bcmxcp_usb.c: Refactor get_answer()
routine, make it properly deal with multi-packets responses. Lower
stack usage.
2015-07-27 Daniele Pezzini <hyouko@gmail.com>
* common/common.c, common/str.c, drivers/bcmxcp.c, drivers/blazer.c,
drivers/blazer_ser.c, drivers/blazer_usb.c, drivers/libhid.c,
drivers/mge-xml.c, drivers/nutdrv_qx.c, drivers/powerp-bin.c,
drivers/powerp-txt.c, drivers/powerpanel.c, drivers/tripplitesu.c,
drivers/upscode2.c, include/common.h, include/str.h, server/upsd.c,
tools/nut-scanner/scan_usb.c: common: consolidate some string-
related functions Move *trim*() functions from common to str.
Prepend the 'str_' common prefix. Bailout early if string is NULL
or empty. In *trim_m() functions, make sure the string containing
characters to be removed is not NULL and bailout early if empty.
Add new str_trim[_m]() functions to remove both leading and
trailing characters at the same time. Update all the tree
accordingly; versioning where appropriate.
* common/Makefile.am, common/str.c, include/Makefile.am,
include/common.h, include/str.h: common: add some string-related
functions
2015-11-10 Charles Lepple <clepple+nut@gmail.com>
* data/driver.list.in: HCL: Electrys UPS 2500 (nutdrv_qx and
blazer_ser) Closes
https://github.com/networkupstools/nut/issues/241
* data/driver.list.in: HCL: Eaton E Series DX UPS 1-20 kVA uses
blazer_ser Closes
https://github.com/networkupstools/nut/issues/238
2015-11-09 Arnaud Quette <arnaud.quette@free.fr>
* drivers/eaton-mib.c: snmp-ups: add number of outlets in Eaton ePDU
groups
* docs/nut-names.txt: Add a variable for the number of outlets in a
group Added 'outlet.group.n.count' which provides the number of
outlets in the outlet group 'n'
2015-11-06 Daniele Pezzini <hyouko@gmail.com>
* drivers/nutdrv_qx_voltronic-qs.c: nutdrv_qx: update 'voltronic-qs'
subdriver Since, for devices supported by 'voltronic-qs'
subdriver, in reality: - invalid commands or queries are echoed
back, - accepted commands are followed by action without any
further reply, update the subdriver interface accordingly. Also: -
change slightly the way we publish protocol as ups.firmware.aux, -
update F's reply examples and some info_type (ratings;
output.frequency) in QX to NUT table to reflect reality, - increase
version number.
2015-10-19 Daniele Pezzini <hyouko@gmail.com>
* drivers/nutdrv_qx_voltronic-qs-hex.c: nutdrv_qx: improve 'T'
protocol support in 'voltronic-qs-hex' subdriver Since the last
byte of the reply to the QS query (before the trailing CR) of
devices that implement the 'T' protocol holds in reality ratings
informations (nominal output frequency/voltage and nominal battery
voltage) in its bits, change the 'voltronic-qs-hex' subdriver
accordingly. Also: - change slightly the way we publish protocol as
ups.firmware.aux, - increase version number.
* drivers/nutdrv_qx_voltronic-qs-hex.c: nutdrv_qx: simplify
{in,out}put voltage conversion in 'voltronic-qs-hex' In
'voltronic-qs-hex' subdriver, instead of calculating separately the
fractional and integer part of input and output voltage, do it at
once. Also, increase version number.
* drivers/nutdrv_qx_voltronic-qs-hex.c: nutdrv_qx: improve protocol
identification in 'voltronic-qs-hex' Since 'V' protocol, in
reality, never happens to use the encoded version of the reply to
the QS query, but it always uses the plain version already
implemented in 'voltronic-qs' subdriver, remove it from the
identification process of 'voltronic-qs-hex' subdriver. Also,
remove some non-significant entries from the testing table and
increase version number.
* drivers/nutdrv_qx_voltronic-qs-hex.c: nutdrv_qx: harmonize
declarations/definitions in 'voltronic-qs-hex' In 'voltronic-qs-
hex' subdriver, the scope of support functions is limited to the
subdriver as rightly stated in forward declarations, so correct
their definitions to reflect that. Also, increase version number.
2015-10-09 Arnaud Quette <arnaud.quette@free.fr>
* docs/nut-qa.txt: Reference Black Duck OpenHUB in QA documentation
Closes networkupstools/nut#192
2015-10-08 Arnaud Quette <arnaud.quette@free.fr>
* drivers/snmp-ups.c: snmp-ups: also use __func__ for additional
traces
* drivers/powerware-mib.c: powerware-mib: more comments for RFC
device.event Add more comments on the need to RFC device.event for
some data that are currently published under ups.alarm
* drivers/powerware-mib.c: snmp-ups: improve Eaton 3-phase UPS alarms
reporting Eaton 3phase UPS, using the Powerware MIB, can expose
many new alarms. Also use the standard driver "X.YY" versioning,
and bump subdriver release to "0.85"
* drivers/snmp-ups.c, drivers/snmp-ups.h: snmp-ups: fix and improve
the ups.alarms mechanism This mechanism allows to walk a subtree
(array) of alarms, composed of OID references. The object
referenced should not be accessible, but rather when present, this
means that the alarm condition is TRUE. Both ups.status and/or
ups.alarm values can be provided
* drivers/snmp-ups.c: snmp-ups: fix on some snprintf calls Some
snprintf calls are using dynamically allocated variables, which
doesn't work with sizeof
* drivers/snmp-ups.c: snmp-ups: use __func__ in debug messages
* drivers/snmp-ups.c: snmp-ups: nut_snmp_get_oid() returns TRUE on
success
* drivers/snmp-ups.c: snmp-ups: only use snprintf calls instead of
sprintf
* drivers/eaton-mib.c, drivers/snmp-ups.c: snmp-ups: simplify
handling of other alarms outlet, outlet groups and phase alarms
are now using a simplified approach that does not require specific
lookup structure to adapt alarm messages. This applies to Eaton
ePDU G2/G3
2015-09-22 Arnaud Quette <arnaud.quette@free.fr>
* drivers/snmp-ups.c: snmp-ups: fix a typo error in debug message
Unknown is spelled with an ending N (reported by Evgeny "Jim"
Klimov, from Eaton)
* drivers/snmp-ups.c: snmp-ups: optimize phase number extraction
efficiency Since we know that we are processing an alarm for a
phase "Lx", don't use strchr, but simply index (reported by Evgeny
"Jim" Klimov, from Eaton)
* docs/nut-names.txt, drivers/eaton-mib.c: snmp-ups: use dash-
separator for out-of-range For the sake of coherence with other
status relative to thresholds, "out of range" frequency status now
also use dash as separator, instead of space
* drivers/eaton-mib.c: Fix a spelling error in comments
* drivers/eaton-mib.c: snmp-ups: fix a typo error on Eaton ePDU G2/G3
MIB Critical is really spelled critical, and not cricital, as used
in the various status thresholds value-lookup structures (reported
by Evgeny "Jim" Klimov, from Eaton)
* data/cmdvartab: Mention the unit for ambient humidity information
Add an explicit mention that ambient information related to
humidity use the "(percent)" unit
* data/cmdvartab, docs/nut-names.txt: Mention the unit for input
voltage information Add an explicit mention that input information
related to voltage use the "Volts (V)" unit
* data/cmdvartab: Mention the unit for ambient temperature
information Add an explicit mention that ambient information
related to temperature use the "degrees C" unit
2015-09-18 Arnaud Quette <arnaud.quette@free.fr>
* drivers/eaton-mib.c: snmp-ups: add outlet group identifier for
Eaton ePDU Eaton ePDU can now publish the parent group of each
outlet
* docs/nut-names.txt: Extend outlet collection namespace with group
ID An outlet can now publish the group to which it belongs to
* drivers/snmp-ups.c: snmp-ups: complete nut_snmp_get_{str,int}
These methods now allow to get the value of an OID returned by the
source OID (as for the sysOID). In case of failure (non existent
OID), the functions return the last part of the returned OID (ex:
1.2.3 => 3)
* drivers/snmp-ups.c: snmp-ups: create a nut_snmp_get_oid() function
This method allows to get the value of an OID which is also an OID
(as for the sysOID), without trying to get the value of the pointed
OID. This will allow to use nut_snmp_get_{int,str}() the get the
value of the pointed OID
2015-09-17 Arnaud Quette <arnaud.quette@free.fr>
* drivers/eaton-mib.c: snmp-ups: outlet groups type handling for
Eaton ePDU Eaton ePDU can now publish the type of outlet group
* docs/nut-names.txt: Extend outlet group collection namespace with
type The type of outlet group can now be published, part of the
new outlet.group data collection
* drivers/eaton-mib.c: snmp-ups: outlet groups commands for Eaton
ePDU Eaton ePDU can now handle commands outlet groups, including
on, off and reboot (cycle)
* drivers/snmp-ups.c: snmp-ups: fix commands handling for outlet
groups The su_instcmd() function of snmp-ups is now adapted to
support outlet groups
* drivers/eaton-mib.c: Advanced outlets groups alarm handling for
Eaton ePDU Eaton ePDU can now handle alarms on outlets groups, for
voltage and current, relative to the configured thresholds
* drivers/snmp-ups.c: snmp-ups: improvements for outlet groups and
alarms Improve the code for general template management, including
outlets and outlets groups for now, and add alarm management for
outlet groups, the same way as for outlets
2015-09-16 Arnaud Quette <arnaud.quette@free.fr>
* drivers/snmp-ups.c: snmp-ups: fix set variable for outlet groups
The setvar() function of snmp-ups is now adapted to support outlet
groups
* drivers/eaton-mib.c: snmp-ups: outlet groups handling for Eaton
ePDU Eaton ePDU can now handle outlet groups, including voltage
and current (with thresholds and status relative to the configured
thresholds), along with power and realpower. A subsequent commit
will address the alarms, settings and commands. Bump subdriver
version to 0.30
* drivers/snmp-ups.c: snmp-ups: update debug message The template
guestimation function name was changed, but the debug message was
left with the old function name
2015-09-15 Arnaud Quette <arnaud.quette@free.fr>
* docs/nut-names.txt: Extend NUT namespace with outlet.group
collection A new data collection, called "outlet.group", is now
available. It provides grouped management for a set of outlets. The
same principles and data than the outlet collection apply to
outlet.group
* drivers/snmp-ups.c, drivers/snmp-ups.h: snmp-ups: adapt template
mechanisms for outlet groups The template handling mechanisms,
originally created for outlets, is now adapted to also manage
outlet groups
2015-09-14 root <root@arno-zbook15.euro.ad.etn.com>
* docs/nut-names.txt: Add a note on the outlet.count variable
2015-09-14 Arnaud Quette <arnaud.quette@free.fr>
* drivers/eaton-mib.c: snmp-ups: add nominal input current for Eaton
ePDU snmp-ups now provides input.[Lx.]current.nominal for Eaton
ePDU G2/G3, both for 1phase and 3phase
* drivers/eaton-mib.c: snmp-ups: better input.power handling for
Eaton ePDUs Improve the way we declare and process input.power, as
previously done for input.realpower, in order to address the
variations between Eaton ePDUs G2 and G3
2015-09-11 Arnaud Quette <arnaud.quette@free.fr>
* drivers/eaton-mib.c: snmp-ups: publish part number for Eaton ePDU
device.part was standardized in NUT namespace, so enable the
declaration for Eaton ePDU
* drivers/eaton-mib.c: snmp-ups: 3-phase alarm handling for Eaton
ePDU Eaton ePDU can now handle alarms on 3-phase, currently
limited to voltage and current, relative to the configured
thresholds
* drivers/snmp-ups.c: snmp-ups: implement 3-phase alarm handling
snmp-ups now allows to publish 3-phase alarms in ups.alarm, the
same way as with outlet. Declaration of such alarms are done using
"Lx.alarm". info_lkp_t structures messages are shared templates
with outlets, and use the string formats to include the context
(outlet or phase) and the number (of the outlet or phase) in alarm
messages. These alarms are then published in "ups.alarm", with the
standard mechanism for alarm publication
* docs/nut-names.txt: Extend 3-phase collection namespace with alarms
3-phase data collection now allows to specify alarms, the same way
than with the outlet collection ("outlet.n.alarm"), but using
"Lx.alarm" (for example "L1.alarm"). These alarms are then
published in "ups.alarm", with the standard mechanism for alarm
publication
* drivers/eaton-mib.c: Advanced threshold handling for Eaton 3-phase
ePDU Eaton ePDU can now handle warning and critical thresholds
settings and status for input voltage and current on 3-phase units.
Alarms are however still to be implement
* docs/nut-names.txt: Extend 3-phase collection namespace with
threshold 3-phase data collection now allows to specify low / high
warning and critical thresholds for voltage and current. Status
relative to the thresholds also exist for these data
2015-09-07 Arnaud Quette <arnaud.quette@free.fr>
* drivers/snmp-ups.c, drivers/snmp-ups.h: snmp-ups: fix loss of
precision when setting values su_setvar() was losing precision
when converting and casting the provided values to send to the SNMP
agent. As an example, with an OID in millivolt (multiplier set to
0.001), when providing 238 (V) using upsrw, the value sent to the
SNMP agent was 237999, so leaking 0.1 volt
2015-09-04 Arnaud Quette <arnaud.quette@free.fr>
* drivers/dstate.c: Extend ups.alarm internal buffer to 1024 chars
Currently, ups.alarm can hold up to 256 chars to expose alarms.
With the recent outlet alarms handling addition, the buffer may
quickly be to small. Thus, increase to 1024, which may still not
be sufficient but already provides a bit more room
* drivers/eaton-mib.c: snmp-ups: outlet alarm handling for Eaton ePDU
Eaton ePDU can now handle alarms on outlets, currently limited to
outlet voltage and current, relative to the configured thresholds
* drivers/snmp-ups.c: snmp-ups: implement outlets / PDU alarm
handling snmp-ups now allows to publish outlets and PDU alarms in
ups.alarm, the same way as with ups.status. Declaration of such
alarms are done using the outlet template mechanism
("outlet.%i.alarm"). info_lkp_t structures messages can also use
the string formats to include the outlet number in alarm messages.
These alarms are then published in "ups.alarm", with the standard
mechanism for alarm publication
* docs/nut-names.txt: Extend outlet collection namespace with alarms
Outlet data collection now allows to specify alarms, using the
template definitions ("outlet.n.alarm"). These alarms are then
published in "ups.alarm", with the standard mechanism for alarm
publication
2015-09-02 Arnaud Quette <arnaud.quette@free.fr>
* drivers/eaton-mib.c: snmp-ups: outlet threshold handling for Eaton
ePDU Eaton ePDU can now handle warning and critical thresholds
settings and status for outlet voltage and current
* docs/nut-names.txt: Extend outlet collection namespace with
threshold Outlet data collection now allows to specify low / high
warning and critical thresholds for voltage and current. Status
relative to the thresholds also exist for these data
2015-09-01 Arnaud Quette <arnaud.quette@free.fr>
* drivers/eaton-mib.c: snmp-ups: alarms handling for Eaton ePDU
Eaton ePDU can now publish alarms, related to input status
(voltage, frequency and current) and ambient status (temperature
and humidity). Note that alarms are still published under
ups.alarms, though these should belong to either pdu.alarms or
better device.alarms
* drivers/eaton-mib.c: Advanced input threshold handling for Eaton
ePDU Eaton ePDU can now handle warning and critical thresholds
settings and status for input voltage and current, along with the
frequency status
* data/cmdvartab, docs/nut-names.txt: Extend input collection
namespace with threshold Input data collection now allows to
specify low / high warning and critical thresholds for voltage and
current. Status relative to the thresholds also exist for these
data, and for the frequency
2015-08-31 Arnaud Quette <arnaud.quette@free.fr>
* drivers/eaton-mib.c: snmp-ups: ambient dry contacts support for
Eaton ePDU Eaton ambient modules, connected on ePDU, now publish
the status of the connected dry contacts sensors
* data/cmdvartab, docs/nut-names.txt: Extend ambient collection
namespace with dry contacts Ambient data collection now allow to
specify dry contacts sensor status
* drivers/eaton-mib.c: snmp-ups: fix Eaton Pulizzi Switched PDU
multiplier As per the previous commit, to well handle integer RW
variables
* drivers/eaton-mib.c: snmp-ups: ambient threshold handling for Eaton
ePDU Eaton ePDU can now handle warning and critical thresholds and
status for both humidity and temperature
* data/cmdvartab, docs/nut-names.txt: Extend ambient collection
namespace with threshold Ambient data collection now allow to
specify warning and critical thresholds
* drivers/eaton-mib.c: snmp-ups: publish presence of Eaton ambient
sensor Publish the actual presence of ambient sensor for Eaton
ePDU G2 and G3
* data/cmdvartab, docs/nut-names.txt: Publish the actual presence of
an ambient sensor A new data was created (ambient.present) to
publish the actual presence of an ambient sensor
2015-10-06 Charles Lepple <clepple+nut@gmail.com>
* data/driver.list.in: HCL: Asium P700, Micropower LCD 1000 and Eaton
5E1100iUSB
2015-10-06 Daniele Pezzini <hyouko@gmail.com>
* data/driver.list.in: HCL: LYONN CTB-800V supported by nutdrv_qx
Protocol: 'voltronic-qs-hex' Reference:
https://github.com/networkupstools/nut/pull/230
2015-08-22 Mariano <marianojan@users.noreply.github.com>
* drivers/nutdrv_qx_voltronic-qs-hex.c: nutdrv_qx: add support for
LYONN CTB-800V Small protocol validation change in 'voltronic-qs-
hex' subdriver to add support for the protocol used by the LYONN
CTB-800V UPS.
2015-09-28 Arnaud Quette <arnaud.quette@free.fr>
* docs/new-drivers.txt: Fix spacing error
2015-09-22 Charles Lepple <clepple+nut@gmail.com>
* drivers/solis.c, drivers/solis.h: solis: remove additional warnings
The "Waiting" flag is always zero, and several other variables were
not used.
* drivers/solis.c, drivers/solis.h: solis: clean up warnings Comment
out unused constants, and add 'static' and 'const' wherever
possible.
2015-09-20 Charles Lepple <clepple+nut@gmail.com>
* drivers/Makefile.am, drivers/solis.c: solis: math fixes As
mentioned here: https://github.com/networkupstools/nut/pull/235
2015-09-19 bsalvador <bruno.salvador@gmail.com>
* drivers/solis.c, drivers/solis.h: solis: patch for Microsol Back-
Ups BZ1200-BR patch for correct reading for Microsol Back-Ups
BZ1200-BR (rebased onto solis_debug branch, and cleaned up
whitespace. -- CFL) Closes
https://github.com/networkupstools/nut/pull/235 and Closes
https://github.com/networkupstools/nut/pull/236
2015-09-16 Arnaud Quette <arnaud.quette@free.fr>
* data/driver.list.in, docs/man/snmp-ups.txt, drivers/powerware-
mib.c, drivers/powerware-mib.h, drivers/snmp-ups.c: snmp-ups: add
Eaton Power Xpert Gateway UPS Card This newer generation of SNMP
card is used for BladeUPS or other UPS, and is serving the same
XUPS MIB, as in the "pw" subdriver
* scripts/subdriver/gen-snmp-subdriver.sh: Update SNMP subdriver
generation script Complete the documentation, by adding some notes
and examples ; Fix the MIBs directories list and the "keep
temporary files" option
2015-09-11 Arnaud Quette <arnaud.quette@free.fr>
* drivers/snmp-ups.c: Improve log/debug output trace
2015-09-08 Charles Lepple <clepple+nut@gmail.com>
* drivers/solis.c: solis: resync with end-of-packet character (0.64)
Suggested by @rpvelloso in https://github.com/networkupstools/nut/i
ssues/231#issuecomment-134795747 Note that the driver could
possibly get out-of-sync after initial detection.
2015-09-07 Charles Lepple <clepple+nut@gmail.com>
* docs/man/macosx-ups.txt, drivers/macosx-ups.c: macosx-ups:
gracefully handle disconnection of UPS Tested on 10.9.5 and
10.10.5. Returns "data stale" when UPS disappears.
2015-09-07 Arnaud Quette <arnaud.quette@free.fr>
* drivers/powerware-mib.c: Bump Powerware SNMP subdriver version
2015-09-04 Charles Lepple <clepple+nut@gmail.com>
* Makefile.am, docs/configure.txt, docs/new-clients.txt, tools/nut-
scanner/README: doc: correct remaining `--with-lib` references
Credit: Paul Vermeer
2015-09-01 Arnaud Quette <arnaud.quette@free.fr>
* drivers/snmp-ups.h: Minor updates to TODO comments
* drivers/snmp-ups.c: Implement ups.alarm for SNMP snmp-ups now
allows to publish alarms in ups.alarm, the same way as with
ups.status
2015-08-31 Arnaud Quette <arnaud.quette@free.fr>
* drivers/snmp-ups.c: Proper handling of integer RW variables RW
variables were previously supposed to always be strings. Thus, the
multiplier (using the info_len field) was not applied. Also allow
setting float values, not only integer
* drivers/snmp-ups.c, drivers/snmp-ups.h: Fix default SNMP retries
and timeout The previous patch was using the default values from
Net-SNMP, which are set to -1. When the user was not providing
overriden values, this was causing the driver to not be able to
establish the communication with the device. The default values are
now fixed, as per documented (i.e. 5 retries and timeout of 1
second). Also bump the driver version to 0.74
* docs/man/ups.conf.txt, drivers/dstate.c: Make more obvious the
socket write failure Document the error that require the use of
the 'synchronous' flag. Also use debug level 1 instead of 2 for the
debug message
2015-08-23 Charles Lepple <clepple+nut@gmail.com>
* drivers/solis.c: solis: Add upsdebug*() and upslogx() calls for
diagnostics
2015-08-18 Kenny Root <kenny@the-b.org>
* drivers/powerware-mib.c: Add ups.start.auto for Powerware SNMP Use
the IETF UPS MIB to indicate to Powerware devices that it should
restart when mains power is applied.
* drivers/powerware-mib.c: Fix some indentation problems in PowerWare
SNMP
* drivers/powerware-mib.c: Add shutdown.return for Powerware SNMP
The Powerware MIB supports the concept of shutting down with a
delay and then returning when line power is restored. The delay is
set to 0 seconds currently.
* drivers/powerware-mib.c: Add load.{off,on}.delay for Powerware SNMP
The commands to shut down with delay have existed since the first
version of the Powerware MIB so add the newer commands
"load.off.delay" and "load.on.delay" to aid in shutdown \
scripts.
2015-08-07 Arnaud Quette <arnaud.quette@free.fr>
* drivers/dummy-ups.c, drivers/dummy-ups.h: Fix dummy-ups for
external value changes dummy-ups allow to change the values of the
publicated variables through the standard upsrw tool. This method
is handy to script value changes, in a controlled way, compared to
the dynamic version (using the TIMER keyword in .dev files), which
changes the values in a non controlled way. Bump driver version to
0.14
* m4/nut_check_libnss.m4: Fully check for a working Mozilla NSS
Rework the NSS tests so that just having runtime libraries
installed is not enough. Moreover, since GNU libc6 also provides a
nss.h header, the test now checks for both nss.h and ssl.h Closes
networkupstools/nut#184
* docs/download.txt: Fix Red Hat / Fedora packages repository URL
2015-08-03 Tomas Halman <TomasHalman@eaton.com>
* clients/nutclient.cpp: Problem: nutclient library sometimes reads
socket closed by server. Solution: proper read return value
evaluation
2015-08-04 Arnaud Quette <arnaud.quette@free.fr>
* tools/nut-scanner/scan_snmp.c: Fix a crash on a 2nd call to
libnutscan on behalf of Tomas Halman, from Eaton Opensource Team
2015-07-24 Nash Kaminski <nashkaminski@gmail.com>
* drivers/tripplitesu.c: tripplitesu: Fix initialization when
tripplite firmware is buggy With some Tripplite SU1000RT2U (and
possibly more) UPS's, a firmware bug causes a malformed response to
the very first command that is sent after the serial port is opened
following a warm or cold boot of the system. My theory is that this
related to either the RS232 data lines or handshaking lines being
pulled high once the server's UART is powered however I have not
determined precisely if this is related to the data line being
pulled high or the handshaking lines being asserted. However, I
have been able to consistently reproduce the issue where the driver
fails to start on the first attempt after a cold/warm boot across 3
different machines and 2 SU1000RT2U UPS's. To workaround this, the
initial enumeration is repeated a 2nd time after 300ms(to allow all
garbage data to arrive) if the first attempt fails, which allows
the driver to consistently startup successfully on the 1st attempt.
Closes networkupstools/nut#220
2015-07-24 Tim Smith <tsmith84@gmail.com>
* INSTALL.nut: Spelling fixes Spelling fixes and capitalization of
SUSE
2015-07-23 Arnaud Quette <arnaud.quette@free.fr>
* scripts/augeas/nutupsconf.aug.tpl: Update Augeas lens for ups.conf
Add the various missing global directives and ups fields
2015-07-20 Daniele Pezzini <hyouko@gmail.com>
* data/driver.list.in: HCL: fix case and spacing
2015-07-18 Daniele Pezzini <hyouko@gmail.com>
* drivers/nutdrv_qx.c: nutdrv_qx: when targeting 'UPS No Ack'
consider also the trailing CR In 'fabula' and 'krauler' USB
subdrivers, take into account also the trailing CR in the reply
while looking for a 'UPS No Ack'.
* drivers/nutdrv_qx.c: nutdrv_qx: stay true to return code in
'fabula' USB subdriver In 'fabula' USB subdriver, when reading
'UPS No Ack' from device, since we already mimic a timeout, also
empty the reply.
2015-07-11 Charles Lepple <clepple+nut@gmail.com>
* data/driver.list.in: HCL: Fideltronic INIGO Viper 1200 supported by
nutdrv_qx
2015-07-02 Charles Lepple <clepple+nut@gmail.com>
* drivers/usbhid-ups.c: usbhid-ups: bump version to 0.41 Both the
eaton_dual_reportdesc and usbhid_ups_input_vs_feature branches
claimed version 0.40, so let's disambiguate the merged version.
2015-07-02 Arnaud Quette <arnaud.quette@free.fr>
* drivers/libhid.c: Add a debug trace for the number of HID objects
found
* drivers/hidtypes.h: Fix testing typo MAX_REPORT is really 500 (HID
objects), not 50!
* drivers/hidparser.c: Report when there are further unprocessed HID
objects Following the last commits, and especially the MAX_REPORT
one, warn whenever there are remaining HID objects that were not
processed. This may serve
* drivers/hidtypes.h: Increase the maximum number of HID objects The
previous value (300) was causing a trim of the remaining objects.
Increase the value to 500, which should give a bit of time
* drivers/libshut.c, drivers/libshut.h, drivers/libusb.c, drivers
/usb-common.h, drivers/usbhid-ups.c: Add support for Eaton dual HID
report descriptor All devices use HID descriptor at index 0.
However, some newer Eaton units have a light HID descriptor at
index 0, and the full version is at index 1 (in which case,
bcdDevice == 0x0202). This dual report descriptor approach is due
to the fact that the main report descriptor is now too heavy, and
cause some BIOS to hang. A light version is thus provided at the
default index, solving this BIOS issues
2015-06-27 Charles Lepple <clepple+nut@gmail.com>
* drivers/macosx-ups.c: macosx-ups: fix for 10.10 (Yosemite); v1.1
In OS X 10.9 and earlier, IOPSGetPowerSourcesInfo() returned a
CFDictionary. In 10.10 it returns a CFArray. Programmers are
supposed to use IOPSGetPowerSourceDescription() to gloss over this
distinction. However, this does not make it easy to distinguish
between a laptop battery and an UPS. So the "port" driver option no
longer has any effect. https://developer.apple.com/library/mac/doc
umentation/IOKit/Reference/IOPowerSources_header_reference/#//apple
_ref/c/func/IOPSGetPowerSourceDescription
2015-06-22 Arnaud Quette <arnaud.quette@free.fr>
* scripts/upower/95-upower-hid.rules, tools/nut-usbinfo.pl: Update
UPower HID rules and generator
2015-06-11 Charles Lepple <clepple+nut@gmail.com>
* drivers/usbhid-ups.c: usbhid-ups.c: fall back to HID Input type if
not a Feature
2015-06-07 Charles Lepple <clepple+nut@gmail.com>
* drivers/tripplite-hid.c: tripplite-hid.c: device.part is static
(version 0.82)
2015-06-04 Daniele Pezzini <hyouko@gmail.com>
* drivers/nutdrv_qx.c: nutdrv_qx: make sure processed item's
boundaries are not wrong
2015-04-26 Nick Mayerhofer <nick.mayerhofer@enchant.at>
* docs/nutdrv_qx-subdrivers.txt, drivers/nutdrv_qx.c,
drivers/nutdrv_qx.h: nutdrv_qx: improve documentation for some
methods
2015-06-04 Daniele Pezzini <hyouko@gmail.com>
* docs/nutdrv_qx-subdrivers.txt, drivers/nutdrv_qx.c,
drivers/nutdrv_qx.h: nutdrv_qx: remove redundant comments and
update docs
2015-04-28 Nick Mayerhofer <nick.mayerhofer@enchant.at>
* drivers/nutdrv_qx_voltronic.c: nutdrv_qx: move var declaration in
'voltronic' subdriver Move variable declaration to fulfill
condition '3.3. Portability' of the developer guide. Bump version.
* drivers/libhid.c: libhid: replace "flush loop" with memset Move to
the C way of setting memory (memset), replacing a for loop with a
few anti-patterns in it: - for (...; ; i++) - for (...; i <
MAGIC_NUMBER; ...) - for (...) array[i] = 0
2015-05-18 Daniele Pezzini <hyouko@gmail.com>
* docs/nutdrv_qx-subdrivers.txt, drivers/nutdrv_qx.c,
drivers/nutdrv_qx.h, drivers/nutdrv_qx_bestups.c,
drivers/nutdrv_qx_mecer.c, drivers/nutdrv_qx_megatec-old.c,
drivers/nutdrv_qx_megatec.c, drivers/nutdrv_qx_mustek.c,
drivers/nutdrv_qx_q1.c, drivers/nutdrv_qx_voltronic-qs-hex.c,
drivers/nutdrv_qx_voltronic-qs.c, drivers/nutdrv_qx_voltronic.c,
drivers/nutdrv_qx_zinto.c: nutdrv_qx: give subdrivers a last chance
to process the command Add (and document) a new function
('preprocess_command()') to preprocess the command to be sent to
the device, just before the actual sending and, in case of instant
commands/setvars, after the 'preprocess()' function has been
triggered (if appropriate). As an example, this function can be
useful to add to all commands (both queries and instant
commands/setvars) a CRC or to fill the command of a query with some
data. Also, in qx_process(), address buf size vs item->answer size
earlier. Update all subdrivers accordingly, bump versions.
2015-06-01 Arnaud Quette <arnaud.quette@free.fr>
* docs/man/snmp-ups.txt, drivers/snmp-ups.c, drivers/snmp-ups.h:
Provide access to Net-SNMP timeout and retries Two new extra
arguments are now available to allow overriding Net-SNMP number of
retries (snmp_retries) and timeout per retry (snmp_timeout). These
respectively maps to snmpcmd "-r retries" and "-t timeout"
2015-05-29 Arnaud Quette <arnaud.quette@free.fr>
* scripts/upower/95-upower-hid.rules: Update UPower HID rules
* tools/nut-usbinfo.pl: Fix UPower device matching for recent kernels
As per the UPower patch below referenced, hiddev* devices now have
class "usbmisc", rather than "usb". See
http://cgit.freedesktop.org/upower/commit/rules/95-upower-
hid.rules?id=9f31068707fc79744961cea7258b0eb262effbf1
2015-05-28 Arnaud Quette <arnaud.quette@free.fr>
* tools/nut-scanner/nut-scan.h, tools/nut-scanner/nut-scanner.c,
tools/nut-scanner/nutscan-device.c, tools/nut-scanner/nutscan-
device.h, tools/nut-scanner/nutscan-display.c, tools/nut-scanner
/nutscan-init.c, tools/nut-scanner/nutscan-init.h, tools/nut-
scanner/nutscan-ip.c, tools/nut-scanner/nutscan-ip.h, tools/nut-
scanner/nutscan-serial.c, tools/nut-scanner/nutscan-serial.h, tools
/nut-scanner/scan_avahi.c, tools/nut-scanner/scan_eaton_serial.c,
tools/nut-scanner/scan_ipmi.c, tools/nut-scanner/scan_nut.c, tools
/nut-scanner/scan_snmp.c, tools/nut-scanner/scan_usb.c, tools/nut-
scanner/scan_xml_http.c: Fix legal information on source-code
headers Copyright and author were not mentioned as it should be.
Most of the nut-scanner copyright belongs to EATON, apart from few
parts. Files descriptions are now also in Doxygen format
2015-05-18 Daniele Pezzini <hyouko@gmail.com>
* docs/nutdrv_qx-subdrivers.txt, drivers/nutdrv_qx.c,
drivers/nutdrv_qx.h, drivers/nutdrv_qx_bestups.c, drivers
/nutdrv_qx_blazer-common.c, drivers/nutdrv_qx_blazer-common.h,
drivers/nutdrv_qx_mecer.c, drivers/nutdrv_qx_megatec-old.c,
drivers/nutdrv_qx_megatec.c, drivers/nutdrv_qx_mustek.c,
drivers/nutdrv_qx_q1.c, drivers/nutdrv_qx_voltronic-qs-hex.c,
drivers/nutdrv_qx_voltronic-qs.c, drivers/nutdrv_qx_voltronic.c,
drivers/nutdrv_qx_zinto.c: nutdrv_qx: make preprocessed value's
size_t a const There's no need to intervene on the passed-to-the-
function value of a preprocessed value's size_t, so clarify it is a
const. Update all subdrivers accordingly, bump versions.
* drivers/nutdrv_qx.c: nutdrv_qx: make sure an answer is not reused
if preprocess_answer() fails If an item's preprocess_answer()
function fails, the answer should not be considered valid and
inherited by the following items with the same command. Therefore,
on failure, clear the answer so that the following items are forced
to query the device and preprocess the answer anew, if appropriate.
2015-05-13 Arnaud Quette <arnaud.quette@free.fr>
* docs/download.txt: Update NUT packages for Windows to 2.6.5-6
2015-05-07 Arnaud Quette <arnaud.quette@free.fr>
* scripts/systemd/nut-server.service.in: Restore systemd relationship
with nut-driver service The Requires directive from nut-server to
nut-driver was previously removed, since it was preventing upsd
from starting whenever one or more drivers, among several, was
failing to start. Use the Wants directive, a weaker version of
Requires, which will start upsd even if the nut-driver unit fails
to start. closes https://github.com/networkupstools/nut/issues/200
2015-04-23 Arnaud Quette <arnaud.quette@free.fr>
* Makefile.am: Cleanup GPG signature before generation
2015-04-22 Arnaud Quette <arnaud.quette@free.fr>
* configure.ac: bump version back to 2.7.3.1
* configure.ac: Restore version 2.7.3 for release
* docs/security.txt: Missing link reference update The filename of
the previous GPG release key was not updated, leading to pointing
to the current release key
2015-04-08 Nick Mayerhofer <nick.mayerhofer@enchant.at>
* docs/nutdrv_qx-subdrivers.txt, drivers/nutdrv_qx.c,
drivers/nutdrv_qx.h: nutdrv_qx: clarify docs/inline comments
2015-04-16 Arnaud Quette <arnaud.quette@free.fr>
* configure.ac: bump version to 2.7.3.1
2015-04-15 Arnaud Quette <arnaud.quette@free.fr>
* configure.ac: update version to 2.7.3
* docs/security.txt: Update release signature verification The
release manager key has change. Update the documentation to reflect
it, along with keeping necessary for checking the previous releases
* docs/download.txt: Fix formatting issue
* NEWS, UPGRADING: Final update for release 2.7.3 Complete the
release information for NUT 2.7.3
* docs/maintainer-guide.txt: Store some comments for latter
processing
2015-04-10 Arnaud Quette <arnaud.quette@free.fr>
* drivers/mge-hid.c: Improve Eaton ABM support for USB/HID units As
per clarifications from David G. Miller (Eaton ABM expert) and
customers request, when ABM is enabled, we now both publish the
following as per the ABM information: - the 5 status bits
{charging, discharging, floating, resting, off} under
battery.charger.status - the 2 historical status bits {CHRG,
DISCHRG} under ups.status When ABM is disabled, we just publish the
2 historical status bits {CHRG, DISCHRG} under ups.status, as per
UPS.PowerSummary.PresentStatus.{Charging,Discharging}, as done
previously
2015-04-02 Arnaud Quette <arnaud.quette@free.fr>
* conf/ups.conf.sample, docs/man/ups.conf.txt, drivers/dstate.c,
drivers/dstate.h, drivers/main.c: Improve synchronous driver flag
implementation The previous commit was suffering a number of
issues. The present commit fixes these, along with adding more
documentation and a better and more understandable implementation
code. Thanks to Daniele Pezzini for the thorough review Closes:
https://github.com/networkupstools/nut/issues/197
2015-04-01 Arnaud Quette <arnaud.quette@free.fr>
* docs/man/ups.conf.txt, drivers/dstate.c, drivers/dstate.h,
drivers/main.c: Implement synchronous driver flag As per issue
#197, NUT drivers work by default in asynchronous mode. This means
that all data are pushed by the driver on the communication socket
to upsd (Unix socket on Unix, Named pipe on Windows) without
waiting for these data to be actually consumed. With some HW, such
as ePDUs, that can produce a lot of data, asynchronous mode may
cause some congestion, resulting in the socket to be full, and the
driver to appear as not connected. By enabling the 'synchronous'
flag, the driver will wait for data to be consumed by upsd, prior
to publishing more. This can be enabled either globally or per
driver.
2015-04-07 Arnaud Quette <arnaud.quette@free.fr>
* scripts/systemd/nut-server.service.in: Do not Require systemd nut-
driver for nut-server Put the Requires=nut-driver.service in
comment for nut-server systemd unit file. Thus we don't require
drivers to be successfully started! This was a change of behavior
compared to init SysV, and could prevent from accessing
successfully started drivers, or at least to audit a system
Closes: https://github.com/networkupstools/nut/issues/200
2015-04-04 Charles Lepple <clepple+nut@gmail.com>
* UPGRADING: UPGRADING: mention SSL permissions (#199)
* docs/security.txt: NSS SSL documentation Addresses new behavior as
part of the NSS forking fix (#199). Formatting and wording fixed as
well.
2015-04-04 Émilien Kia <emilien.kia@gmail.com>
* server/upsd.c: Initialize SSL after deamonize and downgrade to
user. Fix issue #190 - upsd: NSS SSL only working in debug mode
https://github.com/networkupstools/nut/issues/190
2015-04-02 Arnaud Quette <arnaud.quette@free.fr>
* drivers/eaton-mib.c: Better input.realpower handling for Eaton
ePDUs G2/G3 Improve the way we declare and process
input.realpower, in order to address the variations between Eaton
ePDUs G2 and G3
2015-03-19 Arnaud Quette <arnaud.quette@free.fr>
* docs/nut-names.txt: Document new variables and commands addition
The variables and commands that were added were not described in
the NUT namespace document. These are: input.transfer.delay -
battery.energysave.load - battery.energysave.delay -
battery.charger.status - outlet.1.shutdown.return -
outlet.2.shutdown.return
* drivers/bcmxcp.c: Fix the letter case of ABM and outlets status
For more coherence with NUT status publication, these status are
now lower case
* drivers/bcmxcp.c: Add missing Author
2014-10-10 gavrilov-i <gavrilov-i@users.noreply.github.com>
* data/cmdvartab, drivers/bcmxcp.c, drivers/bcmxcp.h: drivers/bcmxcp:
advanced features Closes: #158 Added setvar function exec result
parsing Add command to turn load on after shutdown.stayoff and
shutdown.return. Outlet control changed. Outlet control via
commands "outlet.n.load.on/off" like in other drivers. Variable
outlet.n.staus now only for reading. Some code changes in
outlet.n.shutdown.return command - now supporting more than 3
outlets (up to 9). Add descriptions to new and some old variables
and commands. Add "bypass.start" command, for enabling bypass. For
returning in On-Line mode exec "load.on" command. Additional
checks of UPS vars. Now add zero var only if it could be changed.
2015-04-01 Arnaud Quette <arnaud.quette@free.fr>
* drivers/eaton-mib.c: Workaround input.{power,realpower} for Eaton
ePDUs Add variable declarations to handle missing
input.{power,realpower} on Eaton ePDUs G2 and G3 1phase. On 3phase,
these variables point at SNMP OIDs that sum up the 3 phases
information. These OIDs should also be present on 1phase, however
it's actually not the case. So simply duplicate the L1 declaration
2015-03-31 Arnaud Quette <arnaud.quette@free.fr>
* drivers/powerware-mib.c: Implement battery.charger.status for Eaton
SNMP This new official variable now replaces the historic
'vendor.specific.abmstatus', as per other similar implementations
(in usbhid-ups and bcmxcp drivers)
2015-03-27 Arnaud Quette <arnaud.quette@free.fr>
* drivers/mge-hid.c: Implement Eaton ABM support for USB/HID units
Add support for Eaton Advanced Battery Monitoring, for USB/HID
units. Information are provided through the new
battery.charger.status. For now, at least, when ABM is enabled, the
historic CHRG and DISCHRG flags are not published anymore in
ups.status
2015-03-26 Stuart Henderson <stu@spacehopper.org>
* data/driver.list.in, docs/man/snmp-ups.txt, docs/snmp-
subdrivers.txt, drivers/Makefile.am, drivers/huawei-mib.c, drivers
/huawei-mib.h, drivers/snmp-ups.c: snmp-ups: new subdriver for
Huawei "Hi, the [commit] below adds a new subdriver for snmp-ups
to support Huawei UPS, based on an observed walk from a UPS5000-E
with a few bits filled in from the MIBs (copy at
http://junkpile.org/HUAWEI_UPS_MIB/)." http://news.gmane.org/find-
root.php?message_id=slrnmh6npf.tg7.stu%40naiad.spacehopper.org
2015-03-25 Daniele Pezzini <hyouko@gmail.com>
* drivers/nutdrv_qx_voltronic.c: nutdrv_qx: add support in
'voltronic' subdriver for P13 protocol
2015-03-24 Arnaud Quette <arnaud.quette@free.fr>
* drivers/mge-hid.c: Complementary Energy Saving data for Eaton USB
devices Add a 2nd HID path for battery.energysave.delay. Depending
on the exact device model, different implementations may be used
2015-03-22 Daniele Pezzini <hyouko@gmail.com>
* NEWS: nutdrv_qx: update NEWS about new 'fuji' USB subdriver
2015-03-21 Daniele Pezzini <hyouko@gmail.com>
* drivers/nutdrv_qx.c, drivers/nutdrv_qx.h: nutdrv_qx: typedef
testing_t only if TESTING is #defined First reported by GitHub
user @nickma82
* docs/man/nutdrv_qx.txt, docs/nutdrv_qx-subdrivers.txt: nutdrv_qx:
document 'voltronic-qs-hex' subdriver in man pages
* docs/man/nutdrv_qx.txt, drivers/nutdrv_qx_bestups.c, drivers
/nutdrv_qx_blazer-common.c, drivers/nutdrv_qx_blazer-common.h,
drivers/nutdrv_qx_mecer.c, drivers/nutdrv_qx_megatec-old.c,
drivers/nutdrv_qx_megatec.c, drivers/nutdrv_qx_mustek.c,
drivers/nutdrv_qx_q1.c, drivers/nutdrv_qx_voltronic-qs-hex.c,
drivers/nutdrv_qx_voltronic-qs.c, drivers/nutdrv_qx_zinto.c:
nutdrv_qx: add 'ignoresab' flag to support bogus devices Some
UPSes incorrectly report the 'Shutdown Active' bit (7th bit of the
'status byte') as always on (=1), consequently making the driver
believe the UPS is nearing a shutdown (and, as a result, ups.status
always contains FSD). To workaround this issue, add a new
'ignoresab' flag that makes the driver do just what its name tells
(IGNORE Status Active Bit) skipping the relative item in qx2nut
tables. References: - http://lists.alioth.debian.org/pipermail
/nut-upsdev/2015-March/006896.html -
https://github.com/networkupstools/nut/issues/195
2015-03-11 Arnaud Quette <arnaud.quette@free.fr>
* data/cmdvartab, docs/nut-names.txt: Add some new variable names,
related to ePDUs Add new variables names, related to ePDUs, such
as input.*.load, input.*.realpower and input.*.power
* drivers/eaton-mib.c: Minor update to comments
2015-02-04 Arnaud Quette <arnaud.quette@free.fr>
* drivers/eaton-mib.c: Fix outlet.{power,realpower} data mapping
According to the new mapping using the input collection, these two
data mapping were targeting at the wrong OIDs.
2015-02-03 Arnaud Quette <arnaud.quette@free.fr>
* drivers/eaton-mib.c: Fix and complete a bit Eaton ePDUs support
Add some new data mapping to improve support for Eaton ePDUs. This
commit includes some new NUT data names that requires approval
before being merged
2015-03-19 Arnaud Quette <arnaud.quette@free.fr>
* data/cmdvartab, docs/nut-names.txt, drivers/mge-hid.c: Add more
Energy Saving features for Eaton USB devices Add two new Energy
Saving features: - battery.energysave.delay: to configure the delay
before switching off the UPS if running on battery and load level
low (in minutes) - battery.energysave.realpower: to switch off the
UPS if running on battery and power consumption on UPS output is
lower than this value (expressed in Watts). Note that documentation
in nut-names.txt and cmdvartab was limited to difference with an
upcoming branch merge, that will add the others
* drivers/mge-hid.c: Align Energy Saving variable names Change
ups.load.energysave to battery.energysave.load, to be coherent with
the latest commit made in the bcmxcp driver
2015-03-10 Arnaud Quette <arnaud.quette@free.fr>
* data/cmdvartab, drivers/mge-hid.c: Add a new EnergySaving threshold
for Eaton UPSs Add 'ups.load.energysave' parameter, to enable
energy saving when the power consumption on the UPS output drops
below this value (in percent). This new variable however requires
to go through the NUT RFC process to get approved
2015-03-19 Arnaud Quette <arnaud.quette@free.fr>
* tools/Makefile.am: Also distribute nut-ddl-dump.sh helper script
2015-03-18 Daniele Pezzini <hyouko@gmail.com>
* data/driver.list.in: HCL: EUROCASE EA200N 2000VA supported by
nutdrv_qx Protocol: 'megatec' USB subdriver: 'fuji' Reference: ht
tp://thread.gmane.org/gmane.comp.monitoring.nut.user/8808/focus=908
1
* drivers/nutdrv_qx_bestups.c, drivers/nutdrv_qx_blazer-common.c,
drivers/nutdrv_qx_mecer.c, drivers/nutdrv_qx_megatec-old.c,
drivers/nutdrv_qx_megatec.c, drivers/nutdrv_qx_mustek.c,
drivers/nutdrv_qx_q1.c, drivers/nutdrv_qx_voltronic-qs-hex.c,
drivers/nutdrv_qx_voltronic-qs.c, drivers/nutdrv_qx_zinto.c:
nutdrv_qx: remove redundancy in blazer-common-dependent subdrivers
Since main nutdrv_qx driver already sets an alarm when FSD arises
(see nutdrv_qx.c>ups_alarm_set()), there is no need to do so in the
various subdrivers. So, in order to prevent a duplicated alarm
message, remove all unneeded code from the affected subdrivers (all
the ones that depend on nutdrv_qx_blazer-common).
2015-03-17 Daniele Pezzini <hyouko@gmail.com>
* data/driver.list.in: HCL: update Mecer ME-1000-WTU (supported by
nutdrv_qx) Tested by @sliverc (Oliver Sauder) on NUT 2.7.1
Reference: https://github.com/networkupstools/nut/issues/148
2015-03-16 Daniele Pezzini <hyouko@gmail.com>
* docs/man/nutdrv_qx.txt: nutdrv_qx: document USB subdrivers'
glitches
* drivers/nutdrv_qx.c: nutdrv_qx: add workaround in 'fuji' subdriver
to support all shutdown.returns As 'fuji' subdriver discards all
the commands of more than 3 characters, in order to support 'SnRm'
shutdown.returns (and hence the standard 'S.5R0003' shutdown.return
with DEFAULT_{ON,OFF}DELAYs) map 'SnRm' shutdown.returns to the
corresponding 'Sn' commands, meanwhile ignoring ups.delay.start and
making the UPS turn on the load as soon as power is back.
* drivers/nutdrv_qx.c: nutdrv_qx: fix command handling in 'fuji'
subdriver 'fuji' subdriver supported devices only allow one 8
bytes interrupt as a command/query: make the subdriver discard (and
echo back) all the too long commands.
2014-11-08 Daniele Pezzini <hyouko@gmail.com>
* docs/man/nutdrv_qx.txt: nutdrv_qx: update man for the new 'fabula'
and 'fuji' USB subdrivers
2014-06-26 Daniele Pezzini <hyouko@gmail.com>
* drivers/nutdrv_qx.c: nutdrv_qx: add new 'fuji' USB subdriver Add a
new USB subdriver ('fuji') to support models manufactured by Fuji
(and others) and accompained by UPSmart2000I software.
2015-03-15 Charles Lepple <clepple+nut@gmail.com>
* docs/developers.txt, docs/new-drivers.txt: doc: document build
dependencies, etc. Closes:
https://github.com/networkupstools/nut/issues/189
* docs/nutdrv_qx-subdrivers.txt: doc: fold a few long preformatted
lines in nutdrv_qx developer guide
* docs/FAQ.txt: docs: FAQ update This addresses several issues: *
https://github.com/networkupstools/nut/issues/19 *
https://github.com/networkupstools/nut/issues/191 and Closes:
https://github.com/networkupstools/nut/issues/161
* docs/man/Makefile.am: docs/man: provide additional detail for
missing asciidoc/a2x error
* configure.ac: configure: indicate required version of
Asciidoc/A2X/dblatex Still doesn't address data-only packages like
docbook-xsl, so leaving this issue open. Reference:
https://github.com/networkupstools/nut/issues/162
* docs/Makefile.am, docs/man/Makefile.am: Pass --nonet to xsltproc
This prevents xsltproc from downloading DocBook XSL files for each
step in the documentation build process. Reference:
https://github.com/networkupstools/nut/issues/172 Still need to
document what to do if the build fails.
2015-03-10 Arnaud Quette <arnaud.quette@free.fr>
* docs/documentation.txt: Reference DDL on the Documentation page
Add a reference to the NUT Devices Dumps Library (DDL) on the
Documentation page, both for the website and the distributed
documentation. There are separate references, to distinguish the
DDL interest from a user and a developer point of view
2015-03-06 Arnaud Quette <arnaud.quette@free.fr>
* tools/nut-ddl-dump.sh: First stab at a helper script to generate
device dumps This preliminary version only generates .dev (static)
dump files. However, a merge with nut-recorder.sh, which generates
.seq files (dynamic simulation) is to be considered, along with an
improved version for the newer .nds format
2015-02-24 Charles Lepple <clepple+nut@gmail.com>
* data/driver.list.in: HCL: CPS Value 1500ELCD-RU @ 2.6.3 Source:
http://news.gmane.org/find-
root.php?message_id=1423241134.6830.8.camel%40ignatev
* data/driver.list.in: HCL: JAWAN JW-UPSLC02 with blazer_usb @ 2.7.2
Source: http://news.gmane.org/find-root.php?message_id=SNT404%2dEAS
8312A94DDAF0FAD4B7702BA52A0%40phx.gbl
2015-02-22 Charles Lepple <clepple+nut@gmail.com>
* scripts/python/app/NUT-Monitor, scripts/python/app/gui-1.3.glade:
NUT-Monitor: updated version to 1.3.1
2015-02-14 Charles Lepple <clepple+nut@gmail.com>
* NEWS, UPGRADING: NEWS/UPGRADING for 2.7.3
2015-02-14 Daniele Pezzini <hyouko@gmail.com>
* docs/man/nutdrv_qx.txt: nutdrv_qx: specify 'bestups' ranges in man
pages
2015-01-03 Daniele Pezzini <hyouko@gmail.com>
* drivers/nutdrv_qx_bestups.c: nutdrv_qx: bestups - add support for
'M' query
2014-11-02 Daniele Pezzini <hyouko@gmail.com>
* docs/man/nutdrv_qx.txt, docs/nutdrv_qx-subdrivers.txt: nutdrv_qx:
update man pages for new 'bestups' subdriver
* drivers/Makefile.am, drivers/nutdrv_qx.c,
drivers/nutdrv_qx_bestups.c, drivers/nutdrv_qx_bestups.h:
nutdrv_qx: add BestUPS subdriver (protocol=bestups) A subdriver
using Best Power/Sola Australia protocol as described in
http://www.networkupstools.org/protocols/sola.html Based also on
bestups.c and meant to eventually replace it.
2015-02-14 Michael Fincham <michael.fincham@catalyst.net.nz>
* scripts/python/app/NUT-Monitor: Correct unsafe permissions on
~/.nut-monitor (Debian #777706) fix-permissions-on-start.debdiff
from https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=777706#24
Closes: https://github.com/networkupstools/nut/issues/185
2015-02-14 Michal Soltys <soltys@ziu.info>
* drivers/apcsmart.c: apcsmart: fix SEGV in apc_getcaps() ups ...
2015-02-13 Michal Soltys <soltys@ziu.info>
* drivers/apcsmart.c, drivers/apcsmart.h: apcsmart: fix command set
parsing for protocol version 4 The issue was discovered with
Smart-UPS RT 10000 XL by surr, see
https://github.com/networkupstools/nut/issues/180 When protocol
version is 4, command set query returns string with additional
section after another '.' . This patch updates the code to handle
such string as well.
2015-02-10 Charles Lepple <clepple+nut@gmail.com>
* configure.ac: configure.ac: bump version to 2.7.2.6 for snapshots
* scripts/upower/95-upower-hid.rules: upower: regenerate for Powercom
PID 0001 (PR #121)
* configure.ac: configure.ac: add bug report URL Should be
compatible with Autoconf 2.59 and newer.
2015-02-04 Arnaud Quette <arnaud.quette@free.fr>
* drivers/netvision-mib.c: Improve support for on-battery detection
Add support for upsAlarmOnBattery OID, to better detect on-battery
events (reported by Henning Fehrmann)
* drivers/libhid.c, drivers/libhid.h: Fix compilation warning related
to sign comparison
2015-01-31 Ryan Underwood <nemesis@icequake.net>
* drivers/apc-hid.c, scripts/upower/95-upower-hid.rules: Add a
product ID for APC AP9584 USB kit. Resolves
networkupstools/nut#181
2015-01-12 Charles Lepple <clepple+nut@gmail.com>
* scripts/upower/95-upower-hid.rules: upower: regenerate rules file
for OpenUPS PID 0xd005
* Makefile.am: Add systemd unit dir fix for 'make distcheck'
2015-01-11 Sergey Kvachonok <ravenexp@gmail.com>
* configure.ac: Undo ${systemdsystemunitdir} mangling. Running sed
's/\/lib/\${libdir}/' destroys any ${systemdsystemunitdir} values
that don't start with '/lib' e.g. '/usr/lib64/systemd/system'
becomes '/usr/usr/lib6464/systemd/system'. If a local installation
prefix is needed use appropriately prefixed --with-
systemdsystemunitdir='' parameter instead.
2015-01-02 Charles Lepple <clepple+nut@gmail.com>
* docs/cables.txt, docs/config-notes.txt, docs/configure.txt,
docs/features.txt, docs/history.txt, docs/man/nutdrv_qx.txt, docs
/nut-names.txt, docs/scheduling.txt, docs/security.txt: docs: typo
fixes
2015-01-01 Charles Lepple <clepple+nut@gmail.com>
* docs/cables.txt: docs: MGE NMC pinout Closes
https://github.com/networkupstools/nut/issues/141
* docs/cables.txt: docs: Best Power cable pinout Closes
https://github.com/networkupstools/nut/issues/164
* INSTALL.nut: docs: clarify group ownership of directory in
INSTALL.nut Closes
https://github.com/networkupstools/nut/issues/151
* docs/man/dummy-ups.txt: docs: dummy-ups repeater mode requires `@`
in port name Also reworded parts of the man page.
2014-12-17 bsalvador <bruno.salvador@gmail.com>
* drivers/solis.c: Update solis.c to force ScanReceivePack()
2014-12-12 Andy Juniper <ajuniper@freeuk.com>
* clients/upslog.c, docs/man/upslog.txt: upslog: break out of sleep
on SIGUSR1 and log immediately Reference: http://news.gmane.org
/find-root.php?message_id=54863D44.3000902%40freeuk.com
2014-11-25 Charles Lepple <clepple+nut@gmail.com>
* data/driver.list.in: HCL: additional NHS models
2014-11-17 Charles Lepple <clepple+nut@gmail.com>
* data/driver.list.in: HCL: NHS Sistemas de Energia: Expert C
Isolador series Source: http://news.gmane.org/find-root.php?messag
e_id=CADe06rfE5MA%3dyWDZzofPsC7TOgGOU4TRSoi67uMXedymA9L7ow%40mail.g
mail.com
2014-11-07 Arnaud Quette <arnaud.quette@free.fr>
* scripts/subdriver/gen-snmp-subdriver.sh: Various minor fixes to the
SNMP subdriver generator
2014-11-06 Charles Lepple <clepple+nut@gmail.com>
* drivers/openups-hid.c: openups-hid: Fix scale factors for 0xd005
(0.4) Previous commit had extra scale factors applied.
* drivers/openups-hid.c, drivers/openups-hid.h: openups-hid: voltage
scale factors based on product IDs
* drivers/openups-hid.c: openups-hid: remove a const; this will
require more thought The USB matching routines should have their
parameters marked as "const" to indicate that they do not modify
the matching tables, but that will require more invasive changes.
Roll this back for now.
2014-11-05 Charles Lepple <clepple+nut@gmail.com>
* drivers/openups-hid.c: openups-hid: const and float/double fixups
(0.2)
* drivers/openups-hid.c: openups-hid: add USB ProductID d005 for
OpenUPS2
2014-11-05 Arnaud Quette <arnaud.quette@free.fr>
* Makefile.am: Store the git start point as a variable For
ChangeLog, we now store the git start point (older reference) in a
separate variable, to make the process more clear
2014-10-31 Charles Lepple <clepple+nut@gmail.com>
* docs/download.txt: Update VMware ESXi package link (from René
Garcia)
2014-10-29 Charles Lepple <clepple+nut@gmail.com>
* scripts/upower/95-upower-hid.rules: upower: Update Belkin and
Liebert rules Follow-up to issue #159.
* drivers/belkin-hid.c, drivers/liebert-hid.c: usbhid-ups: comments
describing Belkin/Liebert/Phoenixtec situation Follow-up to issue
#159.
* data/driver.list.in: HCL: Rucelf UPOII-3000-96-EL supported by
blazer_ser Manufacturer:
http://www.rucelf.ua/en/catalog/upoii-3000-96-el/ Closes:
https://github.com/networkupstools/nut/issues/165
2014-10-28 Elio Parisi <E.Parisi@riello-ups.com>
* drivers/riello_usb.c: riello_usb: explicitly claim USB interface
Reference: http://news.gmane.org/find-root.php?message_id=7731ed2f9
8014b8a90e695a06d077970%40AM3PR07MB289.eurprd07.prod.outlook.com
and https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=738122
2014-10-20 Elio Parisi <E.Parisi@riello-ups.com>
* drivers/riello_usb.c: riello_usb: timeouts and error handling
(0.03) Small changes in riello_usb.c that solved some problem with
managing transmission errors between the Raspberry Pi and Riello
ups (thanks to Fredrik Öberg): introducing timeout in reading ups
data in cypress_command; enhanced handling error codes
http://news.gmane.org/find-root.php?message_id=f5294e5579574bcbaf5c
dd95523e0b68%40AM3PR07MB289.eurprd07.prod.outlook.com
* drivers/riello_ser.c: riello_ser: enhanced handling error codes
(0.03)
2014-10-20 Charles Lepple <clepple+nut@gmail.com>
* docs/.gitignore: docs: docinfo.xml is now auto-generated
2014-10-20 Nik Soggia <nut@niksoggia.it>
* drivers/Makefile.am: missing -lm in drivers/Makefile.am Both
bcmxcp and bcmxcp_usb use ldexp(), so both need `-lm`.
http://news.gmane.org/find-
root.php?message_id=544515BA.4060804%40niksoggia.it
2014-10-10 Paul Chavent <paul.chavent@onera.fr>
* drivers/belkin-hid.c: drivers : add Liebert GXT3 device.
* drivers/main.c: drivers : fix possible memory leak. In arguments
parsing, if user option is passed.
2014-09-30 Michal Soltys <soltys@ziu.info>
* drivers/apcsmart.c: apcsmart: increase passes in setvar_enum()
Current 6 is not enough for bigger units - especially if we swap to
the value directly preceeding the current setting.
2014-09-27 Daniele Pezzini <hyouko@gmail.com>
* configure.ac, docs/Makefile.am, docs/docinfo.xml,
docs/docinfo.xml.in: docs: add NUT version number/date in PDF
documents Reference:
https://github.com/networkupstools/nut/issues/150
* docs/chunked.xsl, docs/common.xsl, docs/xhtml.xsl: docs: move
DocBook options common to html stylesheets to common.xsl
* docs/Makefile.am, docs/common.xsl: docs: add NUT version
number/date into footer of HTML pages Reference:
https://github.com/networkupstools/nut/issues/150
2014-09-28 Arnaud Quette <arnaud.quette@free.fr>
* docs/configure.txt: Clarify a bit more Avahi build requirements
* tools/nut-scanner/Makefile.am: Don't reference subdir-object with
$(top_srcdir) Replace references to objects in separate
directories that were using $(top_srcdir) by the expanded version
'../../'. The variable was otherwise part of the path, resulting in
build failures. This completes commit f8abb9b Closes
networkupstools/nut#155
* configure.ac: Explicitly use subdir-objects in automake init
Closes networkupstools/nut#155
2014-09-27 Arnaud Quette <arnaud.quette@free.fr>
* configure.ac, m4/nut_check_asciidoc.m4: Also check for source-
highlight at configure time source-highlight is used for
documentation generation. It's however optional, so we just check
for the sake of completion
2014-09-27 Arnaud Quette <arno@arno-zbook15.euro.ad.etn.com>
* docs/man/Makefile.am, docs/man/asciidoc.conf: Add NUT version
number into footer of HTML man pages Override AsciiDoc default for
footer-txt to include NUT version number into footer of HTML man
pages. This commit addresses the 2nd point of
networkupstools/nut#150
2014-09-26 Charles Lepple <clepple+nut@gmail.com>
* drivers/tripplite_usb.c: tripplite_usb: set input.voltage.nominal
back to 230V (0.30) Keeps the input.voltage and output.voltage
scaling from 0.28 Discussion:
http://article.gmane.org/gmane.comp.monitoring.nut.user/8719
2014-09-26 Arnaud Quette <arnaud.quette@free.fr>
* conf/upsmon.conf.sample.in, docs/man/nut.conf.txt,
docs/man/upsmon.conf.txt, docs/packager-guide.txt: Replace outdated
references to shutdown.txt shutdown.txt was merged into config-
notes.txt during the AsciiDoc conversion of the whole documentation
and website. This content is now available in the docs/config-
notes.txt file, section [[UPS_shutdown]] "Configuring automatic
shutdowns for low battery events"
* conf/upsmon.conf.sample.in: Fix default value of POWERDOWNFLAG
POWERDOWNFLAG path changed from the hard-coded value /etc/killpower
to the build-time generated @CONFPATH@/killpower. This resulted in
an unexpected value '/etc/nut/killpower', at least on Debian.
(reported by Laurent Bigonville) Closes networkupstools/nut#74
2014-09-25 Daniele Pezzini <hyouko@gmail.com>
* drivers/nutdrv_qx.c: nutdrv_qx: move to ltrim_m()/rtrim_m()
functions
* common/common.c, include/common.h: Add ltrim_m()/rtrim_m()
functions to trim several chars at the same time Also, make
ltrim() / rtrim() wrappers around ltrim_m() / rtrim_m().
* common/common.c: Make ltrim() modify the input string Also, always
check string length in both ltrim() and rtrim(). Reference:
https://github.com/networkupstools/nut/issues/154
2014-09-25 Charles Lepple <clepple+nut@gmail.com>
* data/driver.list.in: HCL: sort Tripp Lite models by name, then
increasing power I know this doesn't allow the cell merging code
to do as much, but this should make it easier to find models.
* data/driver.list.in: HCL: add Tripp Lite OMNIVSINT800
(tripplite_usb) Source:
http://article.gmane.org/gmane.comp.monitoring.nut.user/8713
* drivers/tripplite_usb.c: tripplite_usb: scale min/max voltages for
SMART protocol (0.29) Observed in a dump file from driver version
0.11. Scale input.voltage.minimum and input.voltage.maximum the
same way as other voltages.
* drivers/tripplite_usb.c: tripplite_usb: fix voltage scaling for
240V/1001 (0.28) Reported by Dave Williams:
http://article.gmane.org/gmane.comp.monitoring.nut.user/8713 The
input.voltage and output.voltage scaling for Protocol 1001 did not
factor in the input_voltage_scaled value.
2014-09-24 Arnaud Quette <arnaud.quette@free.fr>
* scripts/python/app/nut-monitor.appdata.xml: Fix compliance of NUT-
Monitor FreeDesktop AppData file Following the upstream update (by
David Goncalves), update the screenshots width and height to
conform to AppData specification:
http://people.freedesktop.org/~hughsient/appdata/ Closes
networkupstools/nut#127
2014-05-18 Charles Lepple <clepple+nut@gmail.com>
* drivers/genericups.c: genericups: log cable type overrides as they
are parsed Fixes networkupstools/nut#28 Better than nothing, but
without a unit to test against, I don't want to make any more
intrusive changes.
2014-09-17 Arnaud Quette <arnaud.quette@free.fr>
* docs/nut-qa.txt: Minor update and completion Use the new Debian
package tracker URL and add Redhat / Fedora bug tracker
2014-09-15 Daniele Pezzini <hyouko@gmail.com>
* data/driver.list.in: HCL: add devices supported by nutdrv_qx -
Fideltronik LUPUS 500 USB Protocol: 'megatec' USB subdriver:
'fabula' Reference: http://lists.alioth.debian.org/pipermail/nut-
upsuser/2014-June/009059.html - FTUPS FT-1000BS(T) / Voltronic
Power Apex 1KVA Protocol: 'voltronic-qs-hex' USB devices -> USB
subdriver: 'cypress' - FTUPS FT-1000BS / Voltronic Power Imperial
1KVA Protocol: 'voltronic-qs' USB devices -> USB subdriver:
'cypress'
2014-07-11 Daniele Pezzini <hyouko@gmail.com>
* drivers/nutdrv_qx.c: nutdrv_qx: improve the USB matching procedure
Consider also the iManufacturer/iProduct strings when checking
devices (if subdriver is not specified) to assign the right
subdriver in case the VID:PID couple is not specific enough.
2014-06-30 Daniele Pezzini <hyouko@gmail.com>
* drivers/nutdrv_qx.c: nutdrv_qx: add new 'fabula' USB subdriver Add
a new USB subdriver ('fabula') to support models
manufactured/rebranded by Fideltronik and accompained by
UPSilon2000 software. Reference:
http://lists.alioth.debian.org/pipermail/nut-
upsuser/2014-June/009059.html
2014-09-03 Daniele Pezzini <hyouko@gmail.com>
* drivers/Makefile.am, drivers/nutdrv_qx.c, drivers
/nutdrv_qx_voltronic-qs-hex.c, drivers/nutdrv_qx_voltronic-qs-
hex.h: nutdrv_qx: add Voltronic-QS-Hex subdriver (protocol
=voltronic-qs-hex) A subdriver using a protocol, specific to UPSes
manufactured by Voltronic Power, partially Hex-encoded (e.g. 'QS'
reply) and supporting some megatec commands.
* docs/nutdrv_qx-subdrivers.txt: nutdrv_qx: update docs about added
support for more complex UPS answers
* drivers/nutdrv_qx.c, drivers/nutdrv_qx.h,
drivers/nutdrv_qx_mecer.c, drivers/nutdrv_qx_megatec-old.c,
drivers/nutdrv_qx_megatec.c, drivers/nutdrv_qx_mustek.c,
drivers/nutdrv_qx_q1.c, drivers/nutdrv_qx_voltronic-qs.c,
drivers/nutdrv_qx_voltronic.c, drivers/nutdrv_qx_zinto.c:
nutdrv_qx: add basic support for more complex UPS answers Add
support (also in 'TESTING' mode) for '\0' chars in raw UPS answers
and the ability to preprocess answers before anything else (e.g.:
for CRC, decoding, ...). Increase verbosity of USB subdrivers and
serial communication. Always print also the return code when
dealing with an error. Update all subdrivers accordingly, bump
versions.
2014-09-08 Charles Lepple <clepple+nut@gmail.com>
* docs/documentation.txt: docs: Add link to Roger Price's openSUSE
writeup
2014-09-04 Daniele Pezzini <hyouko@gmail.com>
* drivers/nutdrv_qx.c: nutdrv_qx: prevent a vicious loop when
unexpected answers happen If a 'QX_FLAG_QUICK_POLL' item gets an
unexpected (non-empty) answer and, after returning from
'qx_ups_walk()', it is not followed by at least one item using a
different 'command', the driver will loop endlessly using the same
'broken' answer instead of trying to get a new one from the UPS. To
solve this issue, make sure to have an empty 'previous_item' when
starting 'qx_ups_walk()'. Also, bail out of 'qx_ups_walk()' when a
'QX_FLAG_QUICK_POLL' item can't be preprocessed properly through
'ups_infoval_set()'.
2014-09-04 Charles Lepple <clepple+nut@gmail.com>
* docs/man/asem.txt: docs: recommend I2C bus name for asem driver
2014-09-03 Arnaud Quette <arnaud.quette@free.fr>
* docs/man/nut-scanner.txt: Fix typo error in nut-scanner doc The
example network range scanned when using 192.168.0.0/25 is actually
192.168.0.0 to 192.168.0.12*7* not (i.e. not .128) as previously
stated (reported by Evgeny 'Jim' Klimov) Closes
networkupstools/nut#144
2014-09-02 Charles Lepple <clepple+nut@gmail.com>
* data/driver.list.in, drivers/belkin-hid.c: HCL: Belkin Regulator
PRO-USB 050d:0f51 (0.17)
https://github.com/networkupstools/nut/issues/149
2014-08-22 Charles Lepple <clepple+nut@gmail.com>
* data/driver.list.in: HCL: Mecer ME-100-WTU with blazer_usb USB
VID:PID = 0665:5161 Tested by @silvec (Oliver Sauder) on NUT 2.6.3
Reference: https://github.com/networkupstools/nut/issues/148
2014-08-19 Charles Lepple <clepple+nut@gmail.com>
* docs/documentation.txt: docs: update links for two articles
2014-08-17 Charles Lepple <clepple+nut@gmail.com>
* tools/nut-usbinfo.pl: nut-usbinfo: fix FreeBSD devd.conf to use
$cdev
* scripts/upower/95-upower-hid.rules: 95-upower-hid.rules: updated by
nut-usbinfo.pl URL updated in previous commit.
* tools/nut-usbinfo.pl: nut-usbinfo: change link from Alioth SVN to
GitHub
* scripts/udev/.gitignore: udev: ignore 62-nut-usbups.rules Follow-
up commit to networkupstools/nut#140
2014-08-17 Yann E. MORIN <yann.morin.1998@free.fr>
* conf/Makefile.am: conf/: fix parallel install Do not reference the
upsmon.conf.sample twice, otherwise install, with a high number of
make jobs, may fail, like so: http://autobuild.buildroot.net/result
s/256/2567e13cd5bc702bc3a38a1d6fc8e34022cc7db5/build-end.log ---
This is not a rare occurence, as my testing managed to trigger the
issue in about 1 test out of 10 on average, on a not-so-fast
machine.
2014-08-16 Charles Lepple <clepple+nut@gmail.com>
* tools/nut-usbinfo.pl: nut-usbinfo: ignore *.orig files
2014-08-14 Émilien Kia <emilien.kia@gmail.com>
* configure.ac, docs/man/Makefile.am, m4/nut_check_asciidoc.m4: Test
presence of xmllint for manpages doc generation.
* configure.ac, docs/man/Makefile.am, m4/nut_check_asciidoc.m4: Test
presence of xsltproc for manpages doc generation.
2014-08-04 Charles Lepple <clepple+nut@gmail.com>
* docs/man/ups.conf.txt, drivers/libusb.c: Remove redundant
usb_set_altinterface(), unless user requests it Adds flag/value to
USB driver options. Closes networkupstools/nut#138
2014-08-09 Charles Lepple <clepple+nut@gmail.com>
* drivers/blazer_usb.c, drivers/libusb.c, drivers/nutdrv_qx.c,
drivers/tripplite_usb.c, drivers/usb-common.h, drivers/usbhid-
ups.c: libusb.c: consolidate USB-related addvar() calls
* drivers/cps-hid.c: usbhid-ups (CPS): determine battery.voltage
scale factor at runtime If the battery.voltage reading is greater
than 1.4x battery.voltage.nominal, apply a scale factor of 2/3 to
bring the voltage back in line. Closes networkupstools/nut#142
2014-08-08 Arnaud Quette <arnaud.quette@free.fr>
* docs/man/nut-scanner.txt: Fix typo error Fix a typo error on "-B"
option (reported by Evgeny 'Jim' Klimov)
2014-08-05 Arnaud Quette <arnaud.quette@free.fr>
* scripts/python/Makefile.am: Distribute FreeDesktop AppData file for
NUT Monitor FreeDesktop AppData file for NUT Monitor was not
distributed, waiting for some approval
2014-08-01 Arnaud Quette <arnaud.quette@free.fr>
* scripts/udev/Makefile.am, scripts/udev/README: Fix USB permission
issues related to Linux / udev Rename udev rules file to 62-nut-
usbups.rules, to prevent NUT USB privileges from being overwritten
Closes #140
* docs/cables.txt: Fix typo error on Eaton / MGE USB-RJ45 cable
2014-07-14 Charles Lepple <clepple+nut@gmail.com>
* scripts/Aix/.gitignore: Ignore generated AIX spec file
2014-07-14 Giuseppe Corbelli <giuseppe.corbelli@copanitalia.com>
* AUTHORS, docs/man/asem.txt: asem: additional documentation
http://article.gmane.org/gmane.comp.monitoring.nut.devel/6741
2014-07-13 Charles Lepple <clepple+nut@gmail.com>
* docs/man/upscli_get.txt: upscli_get(): mention SIGPIPE handling
Closes: #132
* data/driver.list.in: HCL: distinguish between Tripp Lite old and
new protocol 3005
2014-07-13 Arnaud Quette <arnaud.quette@free.fr>
* scripts/python/app/nut-monitor.appdata.xml: Complete FreeDesktop
AppData file for NUT Monitor As per Richard Hughes comments, in
#127, complete the description field
2014-07-12 Arnaud Quette <arnaud.quette@free.fr>
* scripts/Aix/nut-aix.spec.in: Minor adjustments as per Github
comments
* docs/configure.txt: Add missing documentation for configure option
The new asem driver introduced --with-linux_i2c, for which
documentation was missing in configure documentation
2014-07-11 Charles Lepple <clepple+nut@gmail.com>
* NEWS, data/driver.list.in, docs/man/Makefile.am, docs/man/asem.txt,
docs/man/index.txt: asem: documentation
2014-07-07 Giuseppe Corbelli <giuseppe.corbelli@copanitalia.com>
* configure.ac, data/driver.list.in, drivers/Makefile.am,
drivers/asem.c: Support for ASEM UPS on Linux/i2c Patch from
http://article.gmane.org/gmane.comp.monitoring.nut.devel/6723
Thread: http://news.gmane.org/find-
root.php?message_id=53A83FCB.1080808%40copanitalia.com Builds on
Ubuntu 12.10 and 14.04; requires libi2c-dev
2014-07-05 Charles Lepple <clepple+nut@gmail.com>
* drivers/tripplite_usb.c: tripplite_usb: fix typos in bin2d() and
control_outlet() (0.27)
* drivers/tripplite_usb.c: tripplite_usb: control_outlet() for
protocol 3005 (0.26)
* drivers/tripplite_usb.c: tripplite_usb: Additional 3005 protocol
support (0.25) http://news.gmane.org/find-root.php?message_id=CAFe
iwyG8HCfg%2dQqxcwhnm1Yo0z0F0BLyOPCYX%2d4yMMFg8sB4QQ%40mail.gmail.co
m
* drivers/tripplite_usb.c: tripplite_usb: basic support for 3005
binary protocol (0.24) Based on logs from SMART500RT1U
2014-07-04 vesnn <metanoite@rambler.ru>
* drivers/powercom.c: Update powercom.c Fix Powercom Imperial
initialization for models since 2009 with USB interface.
2014-06-23 Arnaud Quette <arnaud.quette@free.fr>
* scripts/python/app/nut-monitor.appdata.xml: Create a FreeDesktop
AppData file for NUT Monitor appData files provide to users long
descriptions, screenshots and other useful information on
application. This will mainly serve for Software Center like
applications
2014-06-19 Charles Lepple <clepple+nut@gmail.com>
* data/driver.list.in: HCL: Lacerda New Orion 800VA with blazer_usb
http://news.gmane.org/find-root.php?message_id=CANDysWwqgTUMYU03QbP
T8JxEtLd38mvwfTMMhZqS%3d%2diGpdvJDA%40mail.gmail.com
2014-06-17 Charles Lepple <clepple+nut@gmail.com>
* data/driver.list.in: HCL: add APC-Microsol entry for solis
* drivers/solis.c: solis: silence clang warnings about extra
parentheses Since we're in the neighborhood (#133)... Typically,
the idiom is either: if ( a == b ) for equality checking, or: if
( ( a = b ) ) for assignment with a comparison.
* drivers/solis.c, drivers/solis.h: solis: eliminate fixed-length
string buffer for model name The new APC model name overflows the
buffer. (#133)
2014-06-16 bsalvador <bruno.salvador@gmail.com>
* drivers/solis.c: Update on solis.c to add more support to Back-UPS
1200BR
* drivers/solis.c: Update solis.c to support Microsol-APC Unit.
Added support to Back-UPS 1200BR (Microsol-APC) unit.
2014-06-15 Charles Lepple <clepple+nut@gmail.com>
* docs/man/upscli_get.txt, docs/man/upscli_list_next.txt,
docs/man/upscli_list_start.txt: docs: synchronize upscli_*
numq/numa with header There were a few leftover signed int
parameters in the man pages, but the headers and implementation use
'unsigned int'. Closes:
https://github.com/networkupstools/nut/issues/131
* docs/man/solis.txt: docs: mention APC in Microsol driver man page
* docs/man/apcsmart.txt: docs: point APC Microsol users from apcsmart
to solis Also make some of the formatting and grammar self-
consistent.
* drivers/solis.c: solis: recognize APC BZ1200-BR and BZ2200BI-BR
(0.62) Patch suggested by Bruno Salvador for BZ1200-BR, and also
tested by Douglas A. Augusto on BZ2200BI-BR. Reference: *
http://forums.freenas.org/index.php?threads/nobreak-bz1200-br-back-
ups-rs-1200va-600w-bivolt-115-nt.20247/ * http://news.gmane.org
/find-root.php?message_id=CACu22%2d3Nn2R%3dQQe9uy%5fPXHRduaPaFgCp2S
w4ra57Ow2qDQcOJQ%40mail.gmail.com
2014-06-08 Arnaud Quette <arnaud.quette@free.fr>
* scripts/subdriver/gen-snmp-subdriver.sh: Inline documentation fixes
2014-06-03 george <rpubaddr0@gmail.com>
* scripts/python/module/PyNUT.py: Fixed version description.
* scripts/python/module/PyNUT.py: Added author information, bumped
version. According to the semantic versioning scheme
(http://semver.org/), adding features that do not break backwards
compatibility with previous releases means that the minor version
number should be incremented.
* scripts/python/module/PyNUT.py: Change format of raise keyword.
Fixes PyNUT Python 3 compatibility.
* scripts/python/module/PyNUT.py: PyNUT: Create a custom exception
class. This maintains backwards compatibility, and allows calling
programs to use "except PyNUTError" instead of "except \
Exception"
when using PyNUT methods. See
https://wiki.python.org/moin/HandlingExceptions for more
information.
* scripts/python/module/PyNUT.py: Fix error when raising without an
Exception. Raising without a valid exception is invalid: >>>
raise Traceback (most recent call last): File "<stdin>", line \
1, in
<module> TypeError: exceptions must be old-style classes or derived
from BaseException, not NoneType >>> raise Exception Traceback
(most recent call last): File "<stdin>", line 1, in <module>
Exception Changing this to "raise Exception" fixes this problem.
2014-06-01 Charles Lepple <clepple+nut@gmail.com>
* docs/man/tripplite_usb.txt, drivers/tripplite_usb.c: tripplite_usb:
last tweaks, for now. Initialize bv_12V to a dummy value, since
gcc can't see that it is used in the union of both conditionals
where it is set. Also, align the documentation with the strange
definition of empty used by the Tripp Lite state-of-charge
approximation.
* drivers/tripplite_usb.c: tripplite_usb: silence warning (0.23)
Pedantic, to be sure, but someone might try the driver with a
protocol not listed, and sure enough, bv_12V won't be initialized.
* docs/man/tripplite_usb.txt, drivers/tripplite_usb.c: tripplite_usb:
expose battery_min/_max as variables (0.22) http://news.gmane.org
/find-
root.php?message_id=21370.36829.817425.464627%40godel.bruda.ca
2014-05-27 Charles Lepple <clepple+nut@gmail.com>
* data/driver.list.in: HCL: GRAFENTHAL PR-3000-HS supported by snmp-
ups Tested with 2.6.5-3 (0.68) on Windows (IETF MIB 1.4). Some
NUT variables are zero - further testing may be needed. Reference:
http://news.gmane.org/find-root.php?message_id=75FC7A5479BA4A4E8ADF
76BC3AD3E568581EC753%40MS03.MACLE.DE
2014-05-23 Charles Lepple <clepple+nut@gmail.com>
* drivers/tripplite_usb.c: tripplite_usb: use dv/dq charge
calculation for all models (0.21)
2014-05-20 Andrew Burdo <zeezooz@gmail.com>
* drivers/powercom-hid.c: Add comments for some values.
* drivers/usbhid-ups.c: Reuse variable.
* drivers/usbhid-ups.c: Add default case.
2014-05-18 Charles Lepple <clepple+nut@gmail.com>
* scripts/upower/95-upower-hid.rules: upower: regenerate rules file
USB VID:PID = 10af:0004 This dependency graph makes my head spin.
* configure.ac: configure.ac: version to 2.7.2.5 for snapshots
2014-05-13 Daniele Pezzini <hyouko@gmail.com>
* drivers/compaq-mib.c: compaq-mib: comment out no longer used items
As per 31827d5faa86377efb7a92b7aec322cc4c7a275f
2014-05-03 Daniele Pezzini <hyouko@gmail.com>
* docs/download.txt: docs: add Void Linux in download/Binary packages
Reference: https://github.com/networkupstools/nut/issues/125
2014-05-03 Charles Lepple <clepple+nut@gmail.com>
* docs/Makefile.am: docs: add mge-usb-rj45.jpg to distribution
2014-05-02 Arnaud Quette <arnaud.quette@free.fr>
* docs/images/cables/mge-usb-rj45.jpg: Add MGE information on USB-
RJ45 cable The illustration matching the previous commit was still
needed on the nut repository, and not on the nut-website on
* docs/cables.txt: Add MGE information on USB-RJ45 cable These
information were provided by MGE years ago, and were waiting for
counter testing. Martin De Graaf - Loyer has now fixed this. Note
that the matching illustration will be committed on the new nut-
website repository
2014-04-29 Andrew Burdo <zeezooz@gmail.com>
* drivers/powercom-hid.c, drivers/usbhid-ups.c: Bump versions.
* data/driver.list.in, docs/man/usbhid-ups.txt: Update documentation.
* drivers/usbhid-ups.c: Reconnect on interrupt read error.
* drivers/libhid.c, drivers/libhid.h, drivers/powercom-hid.c, drivers
/usbhid-ups.c: Reading from the interrupt pipe implies that you use
INPUT flagged objects.
* drivers/powercom-hid.c: Remove erroneous status.
* drivers/powercom-hid.c: Comment non-compliant variables.
2014-04-17 Andrew Burdo <zeezooz@gmail.com>
* drivers/libhid.c, drivers/libhid.h, drivers/powercom-hid.c, drivers
/usbhid-ups.c: Add support for 0d9f:0001 (USB HID, Powercom).
2014-04-17 Arnaud Quette <arnaud.quette@free.fr>
* NEWS, UPGRADING, configure.ac: Update for release 2.7.2 Complete
the release information for NUT 2.7.2
2014-04-17 Stephen J. Butler <stephen.butler@gmail.com>
* drivers/tripplite-hid.c: Scale for SMART1500LCDT
2014-04-07 Arnaud Quette <arnaud.quette@free.fr>
* drivers/compaq-mib.c: Fix erroneous status in HP/Compaq SNMP MIB
Using the most recent HP firmware (1.76), erroneous on-battery
status were reported. Also disable an erroneous low-battery
definition (pointing nowhere), while waiting for actual
improvements (report and patch from Philippe Andersson ; Closes
networkupstools/nut#117)
2014-04-06 Daniele Pezzini <hyouko@gmail.com>
* drivers/mge-xml.c: mge-xml: fix compile-time warnings, versioning
2014-04-05 Charles Lepple <clepple+nut@gmail.com>
* data/driver.list.in: HCL: Numeric Digital 800 plus USB VID:PID =
0665:5161 Reference: networkupstools/nut#115 (blazer_usb @ 2.6.4;
waiting for confirmation with nutdrv_qx)
* data/driver.list.in: HCL: Eaton Powerware 3105 supported by
bcmxcp_usb Closes networkupstools/nut#117
* data/driver.list.in, drivers/belkin-hid.c: usbhid-ups/belkin-hid:
add support for Emerson Network Power Liebert PSI 1440 USB VID:PID
= 10af:0004
http://article.gmane.org/gmane.comp.monitoring.nut.user/8479
2014-04-05 Arnaud Quette <arnaud.quette@free.fr>
* drivers/al175.c: Fix data format warnings on all architectures
Complete commit 7daa0feb6ed4f1c29bfe14c8e491ba198a4ba643, and
actually fix some of the warnings related data format. Also bump
al175 driver revision
* clients/Makefile.am: Update libupsclient library version
information Following the recent export of libcommon functions in
libupsclient, update the library version information to 4:0:0
2014-04-04 Arnaud Quette <arnaud.quette@free.fr>
* drivers/al175.c: Fix data format warnings Fix a few warnings
related data format, in debug code
* clients/Makefile.am: Add libnutclient library version information
Add the missing LDFLAGS for adding version information
2014-03-21 Arnaud Quette <arnaud.quette@free.fr>
* data/driver.list.in: [HCL] CABAC UPS-1700DV2 supported by
blazer_usb Reported by jammin84 Closes #113
* clients/Makefile.am, common/Makefile.am: Link libupsclient with
libcommon Fix undefined references related to functions of
libcommon. This issue was reported on Debian:
https://bugs.debian.org/731156 (patch from Matthias Klose ; Closes
Github issue #73)
2014-03-18 Charles Lepple <clepple+nut@gmail.com>
* data/driver.list.in: [HCL] Digitus DN-170014 supported by
richcomm_usb Reference: http://lists.alioth.debian.org/pipermail
/nut-upsdev/2014-March/006695.html -or- http://news.gmane.org/find-
root.php?message_id=CADq9dvWMx0xBz9XXkVKXCre4ox%2d2kSeHtD7LW39eEDH1
RCY8sQ%40mail.gmail.com
2014-03-05 Charles Lepple <clepple+nut@gmail.com>
* UPGRADING: Added note about --enable-option-checking=fatal Closes
#99 (really)
2014-03-05 Émilien Kia <emilien.kia@gmail.com>
* scripts/Aix/nut-aix.spec.in: Make web source path independant from
specific version.
* scripts/Aix/nut-aix.spec.in: Use configure-dependant variables
instead of statically defined ones for user and group.
* configure.ac: Use $target_cpu instead of calling uname to know cpu
type. Fix crosscompilation.
2013-06-14 Vaclav Krpec <VaclavKrpec@Eaton.com>
* scripts/Aix/nut-aix.spec.in, scripts/Aix/nut.init: AIX: packaging &
init script improvements (cherry picked from commit
ce195e3a2eff1abbd8e192f4d3e278017d7ffb21)
2013-06-12 Vaclav Krpec <VaclavKrpec@Eaton.com>
* scripts/Aix/nut.init: Fixed client startup detection (cherry
picked from commit 23df5e811cc9008bfa0a37bd174b59890a3760a6)
* scripts/Aix/nut-aix.spec.in: Fixed AIX RPM specfile (cherry picked
from commit 11ba37bf36dcda0398c8c62fab838dd00e54c5db)
2013-06-11 Vaclav Krpec <VaclavKrpec@Eaton.com>
* scripts/Aix/nut-aix.spec.in: Allow libneon-based XML driver &
scanning for AIX (cherry picked from commit
4c2e89ec584b2015b22f4599d1571c26f2f94e3d)
2013-06-10 Vaclav Krpec <VaclavKrpec@Eaton.com>
* clients/Makefile.am: Fix of AIX-specific parseconf linking bug
Added dummy do_upsconf_args to binaries that use libcommon to
satisfy the linker. libcommon links libparseconf, which calls
do_upsconf_args supplied from above as an implementation-specific
routine. (cherry picked from commit
0078f9383d3a7af4f3edfed6c78de387a12c6b2b)
2013-04-25 Vaclav Krpec <VaclavKrpec@Eaton.com>
* clients/Makefile.am, clients/upsclient.c, configure.ac:
linupsclient: NUT scanning on AIX bugfix 1/ A simmilar bug like in
Solaris is in AIX itself---non-blocking connect may return -1 while
errno == 0. Shall be treated as EINPROGRESS. 2/ Linking of
libupsclent.so on AIX requires libcommon, otherwise scanning for
NUT crashes with SIGSEGV on unresolved usplogx (cherry picked from
commit 16177f99bc995852bb86d2183958f24f11993632)
2013-03-13 Vaclav Krpec <VaclavKrpec@Eaton.com>
* Makefile.am: AIX packages: make package does the trick (cherry
picked from commit 1d25bd2868339decace5b3028c834746f2824670)
2013-03-12 Vaclav Krpec <VaclavKrpec@Eaton.com>
* scripts/Aix/nut-aix.spec.in, scripts/Aix/nut.init: AIX packaging:
nut-client uninstal bugfix Packages clean uninstallation
(lost/forgotten commit) (cherry picked from commit
f6dd1aec5d2157a3ba3654621fa8e2ac88b060f9)
2013-03-08 Vaclav Krpec <VaclavKrpec@Eaton.com>
* clients/upsclient.c, configure.ac: Solaris/i386: non-blocking
connect WA (cherry picked from commit
d2b466b9ee5402074ccbf7f2967433350affdbcc)
2013-03-04 Vaclav Krpec <VaclavKrpec@Eaton.com>
* Makefile.am, configure.ac, scripts/Aix/nut-aix.spec.in,
scripts/Aix/nut.init: AIX packaging AIX init script and RPM spec.
file added (cherry picked from commit
3851525edcb417f96a5d1c12fb786b85095b54d4)
2014-03-03 Charles Lepple <clepple+nut@gmail.com>
* data/driver.list.in: HCL: various updates * Closes
https://github.com/networkupstools/nut/issues/107
* http://lists.alioth.debian.org/pipermail/nut-
upsdev/2013-November/006564.html * http://news.gmane.org/find-
root.php?message_id=50D9D460.1080408%40gmail.com
* http://news.gmane.org/find-root.php?message_id=CA%2b4duQ%3dppW%2
bPz%2bRVPVXJyFLj0HErh1ZOtm5tk8b6n5Nd5kSk0g%40mail.gmail.com *
http://news.gmane.org/find-
root.php?message_id=528EC53C.9000801%40me.com
* docs/nut-qa.txt: NUT QA document: updated and reworded
* docs/nut-qa.txt: NUT QA document: CR->LF
* docs/FAQ.txt: FAQ: minor updates Update the bestfortress entry,
fix the mythicbeasts URL, and reword a few entries.
2014-02-13 Charles Lepple <clepple+nut@gmail.com>
* docs/man/upsimage.cgi.txt: upsimage.cgi(8): update GD homepage
2014-03-03 Émilien Kia <emilien.kia@gmail.com>
* drivers/nutdrv_qx.h: Detect if TRUE (and FALSE) are already defined
and define bool_t accordingly.
2014-02-27 Arnaud Quette <arnaud.quette@free.fr>
* UPGRADING: Add a note on Hardware Abstraction Layer removal
* INSTALL.nut, autogen.sh, configure.ac, docs/Makefile.am,
docs/configure.txt, docs/developers.txt, docs/features.txt,
docs/macros.txt, docs/new-drivers.txt, docs/nut-hal.txt, docs
/packager-guide.txt, drivers/Makefile.am, drivers/dstate-hal.c,
drivers/dstate-hal.h, drivers/main-hal.c, drivers/main-hal.h,
m4/nut_check_libhal.m4, m4/nut_config_libhal.m4: Remove the
remaining HAL files and references Remove the remaining build
rules, source code and documentation related to the FreeDesktop
Hardware Abstraction Layer (HAL) support. For the record, with this
HAL implementation, NUT drivers were sending data over DBus
(Closes: #99)
2014-02-24 Charles Lepple <clepple+nut@gmail.com>
* drivers/blazer_usb.c, drivers/libusb.c, drivers/nutdrv_qx.c,
drivers/riello_usb.c, drivers/usbhid-ups.c: OpenBSD ports tree
patches for EPROTO Closes networkupstools/nut#44
2014-02-26 Arnaud Quette <arnaud.quette@free.fr>
* scripts/Makefile.am, scripts/README, scripts/hal/.gitignore,
scripts/hal/Makefile.am, tools/nut-usbinfo.pl: Remove the
generation of HAL support files Remove the code supporting the
generation of HAL FDI file. This is the first commit of a set to
address Github issue #99
* drivers/snmp-ups.c: Fix snmp-ups segmentation fault A basic sanity
check was missing in the core code of snmp-ups, causing a driver
crash under some specific circumstances, at driver initialisation
time. Hence, this does not affect production systems
* README, UPGRADING, docs/FAQ.txt, docs/config-notes.txt,
drivers/Makefile.am, scripts/Solaris/nut.in,
scripts/Solaris/postinstall.in, scripts/Solaris/preremove.in,
scripts/systemd/nut-driver.service.in,
scripts/systemd/nutshutdown.in: Closes #96: Install upsdrvctl to
$prefix/sbin Install upsdrvctl to $prefix/sbin rather than
$driverexec. upsdrvctl has been historically standing beside the
drivers. It now resides in the system binaries ($prefix/sbin)
directory
2014-02-25 Arnaud Quette <arnaud.quette@free.fr>
* drivers/mge-hid.c: Add improved support for Eaton 5P Add the
necessary hooks to improve support for Eaton 5P range. This
includes post-processing of the model name, along with handling
rules for battery voltage (actual and nominal)
2014-02-19 Daniele Pezzini <hyouko@gmail.com>
* docs/Makefile.am, docs/chunked.xsl, docs/common.xsl,
docs/xhtml.xsl: docs: prevent smartphones from being too smart
(docbook) Add HTML <meta> tag to not auto-create telephone number
links on mobile browsers also in docbook processed documents.
Reference: https://github.com/networkupstools/nut/issues/78 XSL
files source: - https://github.com/asciidoc/asciidoc/blob/master
/docbook-xsl/common.xsl -
https://github.com/asciidoc/asciidoc/blob/master/docbook-
xsl/xhtml.xsl - https://github.com/asciidoc/asciidoc/blob/master
/docbook-xsl/chunked.xsl
* docs/man/asciidoc.conf: docs: prevent smartphones from being too
smart Add HTML <meta> tag to not auto-create telephone number
links on mobile browsers. Reference:
https://github.com/networkupstools/nut/issues/78
2014-02-15 Arnaud Quette <arnaud.quette@free.fr>
* docs/acknowledgements.txt: Update NUT team membership for Daniele
Pezzini Daniele Pezzini is a now a NUT senior developer
2014-02-14 Arnaud Quette <arnaud.quette@free.fr>
* docs/acknowledgements.txt, docs/website/news.txt: Formalizing the
end of the relationship with Eaton The situation of the
relationship with Eaton has evolved, and since 2011 Eaton does not
support NUT anymore. This may still evolve in the future. But for
now, please do not consider anymore that buying Eaton products will
provide you with official support from Eaton, or a better level of
device support in NUT.
2014-02-14 Charles Lepple <clepple+nut@gmail.com>
* Makefile.am: devd: use staging directory for distcheck
* drivers/Makefile.am, drivers/snmp-ups.c, drivers/xppc-mib.c,
drivers/xppc-mib.h: snmp-ups: add XPPC-MIB for Tripp Lite
SU10KRT3/1X
* scripts/subdriver/gen-snmp-subdriver.sh: gen-snmp-subdriver.sh:
documentation updates
2014-02-10 Charles Lepple <clepple+nut@gmail.com>
* scripts/subdriver/gen-snmp-subdriver.sh: gen-snmp-subdriver.sh: fix
option typos * Use '-M' for MIB directories, to match snmpwalk and
the help text. * Add space before '-c' in snmpwalk (not sure how
this worked before)
* scripts/Makefile.am: cosmetic: Indent scripts/Makefile.am
EXTRA_DIST continuation lines
* scripts/Makefile.am: Add gen-snmp-subdriver.sh to distribution
tarball
2014-02-14 Arnaud Quette <arnaud.quette@free.fr>
* docs/acknowledgements.txt: Update NUT team membership for
Frédéric Bohe Frederic Bohe, NUT senior developer and Eaton
contractor from 2009 to 2013, is now a retired member. Thanks for
all the hard work on the Windows port, nut-scanner, Unix packaging,
support, ... Also update the developers membership page, from
Alioth to GitHub
2013-02-24 Charles Lepple <clepple+nut@gmail.com>
* autogen.sh, configure.ac, scripts/Makefile.am,
scripts/devd/.gitignore, scripts/devd/Makefile.am,
scripts/devd/README, tools/nut-usbinfo.pl: FreeBSD: generate
devd.conf files for USB UPSes This adds a --with-devd-dir=PATH
option to ./configure, which defaults to /usr/local/etc/devd (or
/etc/devd, whichever is found first). Unlike udev, there does not
seem to be a way to re-trigger rules at runtime. This means you
will likely need to unplug and replug your UPS after installing the
new nut-usb.conf file.
2014-02-13 Arnaud Quette <arnaud.quette@free.fr>
* .gitignore, server/.gitignore: Minor completion to gitignore files
Add a few more exotic targets, related to debug or official
distribution
2014-02-11 Daniele Pezzini <hyouko@gmail.com>
* .gitignore, clients/.gitignore, common/.gitignore, conf/.gitignore,
data/.gitignore, data/html/.gitignore, docs/.gitignore,
docs/man/.gitignore, docs/website/.gitignore,
docs/website/scripts/.gitignore, drivers/.gitignore,
include/.gitignore, lib/.gitignore, m4/.gitignore,
scripts/.gitignore, scripts/HP-UX/.gitignore,
scripts/Solaris/.gitignore, scripts/augeas/.gitignore,
scripts/avahi/.gitignore, scripts/hal/.gitignore,
scripts/hotplug/.gitignore, scripts/python/.gitignore,
scripts/systemd/.gitignore, scripts/udev/.gitignore,
scripts/ufw/.gitignore, server/.gitignore, tests/.gitignore,
tools/.gitignore, tools/nut-scanner/.gitignore: Simplify gitignore
files Remove redundancies and old/svn things. Limit the scope
wherever it makes sense. Ignore all cscope files and test logs.
Make ignoring generated files easier to maintain.
2014-02-11 Charles Lepple <clepple+nut@gmail.com>
* drivers/libshut.c: libshut: partially revert PnP/RTS change
Reported by Baruch Even. It is unclear how this will work after
running nut-scanner, but it is more important to keep the drivers
working. Reference: 65db105 /
2013-09-24T08:18:00Z!fredericbohe@eaton.com Closes:
networkupstools/nut#91
2014-02-09 Daniele Pezzini <hyouko@gmail.com>
* docs/man/nutdrv_qx.txt: nutdrv_qx: update manpage for the newly
supported Voltronic Power P98 units
* drivers/nutdrv_qx.c, drivers/nutdrv_qx_mecer.c,
drivers/nutdrv_qx_mecer.h: nutdrv_qx: improve support for
'(ACK/(NAK' and Voltronic Power P98 UPSes In 'mecer' subdriver's
claim function try to get protocol (QPI, for Voltronic Power
devices) used by the UPS: - supported devices are Voltronic Power's
P98 units - if the UPS doesn't support the QPI command, use its
reply to identify whether it uses '(ACK\r'/'(NAK\r' replies This
way we can catch '(ACK/(NAK' devices, while previously the 'mecer'
subdriver was 'hidden' by the 'megatec' (echo back/'ACK/NAK') one.
Plus Q1 units with 'ACK'/'NAK' replies or echoing back not
supported and rejected commands are no longer wrongly 'claimed' by
the 'mecer' subdriver.
2014-02-03 Daniele Pezzini <hyouko@gmail.com>
* docs/.gitignore, docs/Makefile.am, docs/documentation.txt: docs:
build PDF also for cables.txt
2014-02-02 Daniele Pezzini <hyouko@gmail.com>
* Makefile.am, configure.ac, docs/.gitignore, docs/Makefile.am,
docs/man/.gitignore, docs/man/Makefile.am, docs/stable-hcl.txt,
docs/user-manual.txt, docs/website/.gitignore,
docs/website/Makefile.am, docs/website/css/ie-overrides.css,
docs/website/css/web-layout.css,
docs/website/css/xhtml11-quirks.css, docs/website/css/xhtml11.css,
docs/website/faviconut.ico, docs/website/faviconut.png,
docs/website/news.txt, docs/website/old-news.txt,
docs/website/projects.txt, docs/website/scripts/.gitignore,
docs/website/scripts/filter_png.js, docs/website/scripts/jquery.js,
docs/website/scripts/nut_jquery.js, docs/website/scripts/toc.js,
docs/website/ups-protocols.txt, docs/website/web-layout.conf,
docs/website/website.txt, tools/Makefile.am, tools/nut-hclinfo.py:
website: move to a standalone website
2014-01-18 Daniele Pezzini <hyouko@gmail.com>
* docs/net-protocol.txt: docs: fix a couple of asciidoc errors in
net-protocols.txt
* server/netlist.c: net-protocol: fix closing line of LIST RANGE
2014-01-16 Charles Lepple <clepple+nut@gmail.com>
* drivers/nutdrv_atcl_usb.c: nutdrv_atcl_usb: fix permissions-based
crash, and enable vendor variable (1.1)
2014-01-13 Charles Lepple <clepple+nut@gmail.com>
* .gitignore: Ignore cscope.out
* docs/man/.gitignore, docs/man/nutdrv_atcl_usb.txt,
drivers/nutdrv_atcl_usb.c: nutdrv_atcl_usb: documentation and
logging (v1.0)
2014-01-11 Charles Lepple <clepple+nut@gmail.com>
* drivers/apc-mib.c: snmp-ups: APC SmartBoost and SmartTrim are OL
SmartBoost and SmartTrim are voltage regulation functions that
prevent the UPS from using the battery during brownouts and
overvoltages, so the BOOST and TRIM states are also mapped to OL.
Reference:
http://article.gmane.org/gmane.comp.monitoring.nut.devel/6583
* data/driver.list.in: [HCL] MicroDowell B.Box LP 500: genericups
type 7 Closes networkupstools/nut#83 From @lxp: UPS shutdown
only works when on-battery and has a delay of about 1min until
execution (something between 50sec to 1min 30sec on mine).
References: http://www.ezdirect.it/pdf/lp500.pdf
https://forums.gentoo.org/viewtopic-t-730172-start-0.html
2014-01-11 Daniele Pezzini <hyouko@gmail.com>
* drivers/blazer_ser.c, drivers/blazer_usb.c: blazer: fix man page
references
2014-01-11 Charles Lepple <clepple+nut@gmail.com>
* docs/man/nutdrv_atcl_usb.txt, drivers/nutdrv_atcl_usb.c:
nutdrv_atcl: match iManufacturer (vendor) string
* docs/man/snmp-ups.txt: snmp-ups: update and edit documentation
2014-01-11 Daniele Pezzini <hyouko@gmail.com>
* data/driver.list.in: HCL: add Atlantis Land/Voltronic Power units
supported by nutdrv_qx
* drivers/nutdrv_qx_blazer-common.c, drivers/nutdrv_qx_blazer-
common.h: nutdrv_qx: fix nutdrv_qx_blazer-common.{c,h} header
comments
* docs/man/nutdrv_qx.txt, docs/nutdrv_qx-subdrivers.txt: nutdrv_qx:
update manuals for new 'voltronic-qs' subdriver
2013-12-05 Daniele Pezzini <hyouko@gmail.com>
* drivers/Makefile.am, drivers/nutdrv_qx.c, drivers
/nutdrv_qx_voltronic-qs.c, drivers/nutdrv_qx_voltronic-qs.h:
nutdrv_qx: add Voltronic-QS subdriver (nutdrv_qx protocol
=voltronic-qs) A subdriver using a protocol, specific to UPSes
manufactured by Voltronic Power, based on the 'mustek' one (i.e.
'QS').
2014-01-01 Charles Lepple <clepple+nut@gmail.com>
* drivers/nutdrv_atcl_usb.c: nutdrv_atcl_usb: adjusted logging and
retries (v0.02)
* data/driver.list.in, docs/man/Makefile.am, docs/man/index.txt,
docs/man/nutdrv_atcl_usb.txt: nutdrv_atcl_usb: man page and HCL
entries
2013-12-31 Charles Lepple <clepple+nut@gmail.com>
* drivers/.gitignore, drivers/Makefile.am, drivers/nutdrv_atcl_usb.c,
tools/nut-usbinfo.pl: nutdrv_atcl_usb: 'ATCL FOR UPS' new driver
Reference: http://news.gmane.org/find-
root.php?message_id=%3c52B4C54E.1050106%40ariwainer.com.ar%3e
* drivers/libusb.c, drivers/usb-common.h: Move USB_TIMEOUT to usb-
common.h
2013-12-31 Laurent Bigonville <bigon@bigon.be>
* .gitignore, INSTALL, INSTALL.nut, Makefile.am, docs/FAQ.txt,
docs/Makefile.am, docs/configure.txt, docs/packager-guide.txt, docs
/user-manual.txt: Rename INSTALL to INSTALL.nut Rename it to
INSTALL.nut so autoreconf will not try to overwrite it. In Debian
tools like dh_autoreconf calls autoreconf with -f which overwrite
the INSTALL file.
2013-12-27 Charles Lepple <clepple+nut@gmail.com>
* scripts/subdriver/gen-usbhid-subdriver.sh: usbhid-ups: fix call to
is_usb_device_supported() The is_usb_device_supported() function
now takes a USBDevice_t* instead of a pair of USB ID values.
2013-12-22 Florian Bruhin <nut@the-compiler.org>
* data/driver.list.in, docs/man/powercom.txt, drivers/powercom.c: Add
OptiUPS VS 575C support to PowerCom Reference:
http://news.gmane.org/find-
root.php?message_id=%3c20131126085646.GM28832%40lupin%3e
2013-12-11 Denis Yantarev <denis.yantarev@gmail.com>
* drivers/blazer_usb.c, drivers/nutdrv_qx.c: Fixed incorrectly
reported Ippon response length
2013-11-30 Daniele Pezzini <hyouko@gmail.com>
* docs/man/nutdrv_qx.txt, drivers/nutdrv_qx.c, drivers
/nutdrv_qx_blazer-common.c, drivers/nutdrv_qx_blazer-common.h,
drivers/nutdrv_qx_megatec-old.c, drivers/nutdrv_qx_mustek.c,
drivers/nutdrv_qx_q1.c: nutdrv_qx: fix 'megatec/old' and 'mustek'
subdrivers' claim functions Address, for 'megatec/old' and
'mustek' subdrivers, the same problem fixed in commit
720975f4de910b270ba705a7f2981c2ee33ca2eb for Q1-based ones: - Make
the claim function of 'megatec/old' and 'mustek' subdrivers not
poll the UPS for 'vendor' informations as they are not really
needed to set these protocols apart from the other ones (i.e. the
'status' poll is specific enough, at the time of writing). - Move
common 'light' claim function to nutdrv_qx_blazer-common.{c,h}. -
Update manual. - Versioning.
2013-11-24 Daniele Pezzini <hyouko@gmail.com>
* docs/nutdrv_qx-subdrivers.txt: nutdrv_qx: improve developer manual
Get rid of useless tables. Fix minor errors/typos.
* drivers/nutdrv_qx.c: nutdrv_qx: versioning
* docs/man/nutdrv_qx.txt, docs/nutdrv_qx-subdrivers.txt: nutdrv_qx:
update manuals for new Q1 subdriver and improve readability
2013-11-23 Daniele Pezzini <hyouko@gmail.com>
* drivers/Makefile.am, drivers/nutdrv_qx.c, drivers/nutdrv_qx_q1.c,
drivers/nutdrv_qx_q1.h: nutdrv_qx: add new 'fallback' Q1 subdriver
Add new 'Q1' subdriver. This subdriver implements the same protocol
as the one used by the 'megatec' subdriver minus the vendor (I) and
ratings (F) queries. In the claim function: - it doesn't even try
to get 'vendor' informations (I) - it checks only status (Q1),
through 'input.voltage' variable Therefore it should be able to
work even if the UPS doesn't support vendor/ratings *and* the user
doesn't use the 'novendor'/'norating' flags, as long as: - the UPS
replies a Q1-compliant answer (i.e. not necessary filled with all
of the Q1-required data, but at least of the right length and with
not available data filled with some replacement character) - the
UPS reports a valid input.voltage (used in the claim function) -
the UPS reports valid status bits (1st, 2nd, 3rd, 6th, 7th are the
mandatory ones) This commit reintroduces a functionality of the
blazer subdrivers that was lost because now, in order to tell
whether a device is supported by a subdriver or not, if the user
doesn't call the driver with the 'novendor' flag, both the status
(Q1) and the vendor (I/FW?) queries are needed (that's to better
discern the subdrivers). Reference:
http://lists.alioth.debian.org/pipermail/nut-
upsuser/2013-November/008692.html
2013-11-23 Charles Lepple <clepple+nut@gmail.com>
* configure.ac, configure.in: Rename configure.in to configure.ac
autoconf has been warning about this for a while - let's fix it
before too many branches get created with the old name.
* configure.in: configure.in: bump version to 2.7.1.5 Some packaging
systems don't like the -pre# system.
2013-11-21 Laurent Bigonville <bigon@bigon.be>
* docs/man/ups.conf.txt, docs/man/upsdrvctl.txt, drivers/upsdrvctl.c:
Provide retry options for upsdrvctl and driver(s) As recently seen
in Debian (bugs #694717 and #677143), it may be required to have
upsdrvctl retrying to start the driver in case of failure. More
specifically, a mix of init system (V and systemd), udev and USB
device(s) can result in the /dev entry not being available at
driver startup, thus resulting in a general failure to start NUT.
This commit provides at least a way to overcome this issue. A more
suitable solution will require more work on NUT design. This
patch if based on Arnaud Quette proposal
2013-11-20 Arnaud Quette <arnaud.quette@free.fr>
* Makefile.am: Maintainers targets: distribution signature / hashes
Create some handy targets to ease and automate release publication
2013-11-19 Charles Lepple <clepple+nut@gmail.com>
* configure.in: configure: update version to 2.7.1
* docs/website/news.txt: news: add 2.7.1 release
* Makefile.am: ChangeLog: use full path to generator script
* docs/website/projects.txt: website: update related project links
2013-11-18 Arnaud Quette <arnaud.quette@free.fr>
* NEWS: Minor reordering of the news
2013-11-18 Kirill Smelkov <kirr@mns.spb.ru>
* MAINTAINERS, docs/man/.gitignore, docs/man/Makefile.am,
docs/man/al175.txt, docs/man/index.txt, docs/man/nutupsdrv.txt,
docs/new-drivers.txt, drivers/Makefile.am, drivers/al175.c: al175:
updated driver, please restore it Back in 2005 I was young and
idealistic, that's why you finally marked al175 as 'broken', but
now I understand your points (some) and that in NUT you need good
portability. So this time I've checked that al175 compiles with
CC="gcc -std=c89 -pedantic", and CC="gcc -std=c99 \
-pedantic" Also,
I've tried to clean-up the driver based on feedback from 2009, but
unfortunately I no longer have hardware to test and will not have
any in foreseable future, so the driver was reworked to meet the
project code quality criteria, without testing on real hardware.
Some bugs may have crept in. Changes since last posting in 2009:
- patch rebased on top of current master (v2.6.5-400-g214c442); -
added reference to COMLI communication protocol document; - status
decode errors go to log, instead of setting non-conformant status
like "?T", "?OOST", etc. For such errors new loglevel is
allocated; - "High Battery" status is back; - converted tracing
macros to direct use of upsdebugx and numbers 1,2,3,4 for loglevels
as requested (but now lines got longer because of explicit __func__
usage); - lowered usage of other macros (e.g. REVERSE_BITS
inlined); - alarm(3) is not used anymore - instead whole I/O
transaction time budget is maintained manually; - man page
converted to asciidoc and supported variables list is merged into
it; - upsdebug_ascii moved to common.c and to separate patch.
~~~~ Changes since al175 was removed from NUT tree in 2008: -
alloca was eliminated through the help of automatic variables -
debugging/tracing were reworked to (almost always) use NUT builtins
- al175 now uses 3 debug levels for (1=user-level info, 2=protocol
debugging, 3=I/O tracing) - rechecked
http://eu1.networkupstools.org/doc/2.2.0/developers.html and
applied where apporpiate Also > This driver does not support
upsdrv_shutdown(), which makes > it not very useful in a real world
application. This alone > warrants 'experimental' status, but for
the below mentioned > reasons (to name a few), it's flagged
'broken' instead. Yes, at present shutdown is not supported, and
unfortunately now I don't have AL175 hardware at hand, so that I
can't write it and verify the implementation. I've marked the
driver as DRV_EXPERIMENTAL, although it was tested by us as part of
our systems to work OK for more than three years in production
environment on ships (and we don't need shutdown there -- in
critical situations the system has to operate as long as possible,
untill the battery is empty) Also, all of the previous issues
listed below are now fixed in this al175 version: - ‘return’
with a value, in function returning void (2x) - anonymous variadic
macros were introduced in C99 - C++ style comments are not allowed
in ISO C90 - ISO C forbids braced-groups within expressions (5x) -
ISO C90 forbids specifying subobject to initialize (16x) - ISO C99
requires rest arguments to be used (18x) Yes, "All the world is
not an x86 Linux box," and I've tried to make all the world happy.
Please apply. Thanks, Kirill.
* common/common.c, docs/developers.txt, include/common.h: common:
upsdebug_ascii() - to dump a message in ascii For debugging ASCII-
based protocols with control characters (e.g. COMLI) it is handy to
dump messages not in hex, but in ascii with human readable codes.
Add utility function to do it.
2013-11-17 Charles Lepple <clepple+nut@gmail.com>
* docs/man/.gitignore, drivers/.gitignore: apcupsd-ups: ignore
generated files
* drivers/apcupsd-ups.c: apcupsd-ups: fix cut-n-paste error
* drivers/apcupsd-ups.c: apcupsd-ups 0.04: use O_NONBLOCK instead of
FIONBIO
* NEWS, docs/man/index.txt: apcupsd-ups: add NEWS and man page link
* UPGRADING: Mention upsrw output change.
* docs/man/nut-recorder.txt: Reword nut-recorder man page
* UPGRADING: UPGRADING: link to man pages for changed drivers
* configure.in: Bump version to 2.7.1-pre2
* NEWS, UPGRADING: Update NEWS and UPGRADING for 2.7.1 Closes:
networkupstools#37
* data/driver.list.in: HCL: StarPower PCF-800VA Reported by Don.
Reference: http://news.gmane.org/find-root.php?message_id=%3cCAPO%2
bLDnApF3ALNfp%5fwaVpHqSuJ9sajKCKXPXLLsAWUWww7Of%3dw%40mail.gmail.co
m%3e
* data/driver.list.in: HCL: Atlantis Land A03-P551(V1.2) supported by
blazer_usb Reported by Giovanni Panozzo. Reference:
http://news.gmane.org/find-
root.php?message_id=%3c51B76B0C.1080109%40panozzo.it%3e Note that
blazer_usb will eventually be replaced by nutdrv_qx.
* clients/nutclient.h, clients/upsclient.c,
conf/upsmon.conf.sample.in, configure.in, docs/FAQ.txt,
docs/man/libnutclient.txt, docs/man/libnutclient_general.txt,
docs/man/upsmon.conf.txt, docs/security.txt, drivers/powerman-
pdu.c, server/netssl.c: Replace 'connexion' with 'connection' in
English contexts Also reworded a few phrases surrounding the
replacements.
* docs/man/.gitignore: asciidoc: ignore all generated blazer*.html
files
* data/driver.list.in: HCL: update CyberPower entries, including
CP900AVR Reported by Craig Duttweiler Reference:
http://news.gmane.org/find-
root.php?message_id=%3c51295F86.4080601%40twistedsanity.net%3e
* docs/stable-hcl.txt: GitHub issues can also be used to report HCL
updates
* docs/website/projects.txt: Update links to related projects
* docs/download.txt: Update download page * Re-added link to
Buildbot snapshot generator * Updated a few links
2013-11-13 Daniele Pezzini <hyouko@gmail.com>
* docs/man/.gitignore, drivers/.gitignore: Add nutdrv_qx to
.gitignore files and remove voltronic from them
2013-11-12 Charles Lepple <clepple+nut@gmail.com>
* docs/man/Makefile.am: a2x: use --destination-dir This option seems
to work now. Previously, Asciidoc source files were copied to the
destination directory, but this did not account for included files.
2013-11-12 Daniele Pezzini <hyouko@gmail.com>
* docs/man/nutdrv_qx.txt: nutdrv_qx: fix cross links in manpage
Remove links to voltronic manuals. Fix links to blazer manuals.
2013-11-12 Charles Lepple <clepple+nut@gmail.com>
* .gitignore: git: ignore test-driver, and sort ignores list test-
driver is apparently part of automake, generated for libcpp unit
tests.
2013-11-10 Charles Lepple <clepple+nut@gmail.com>
* docs/man/Makefile.am: Include blazer-common.txt in built tarball
2013-11-10 Daniele Pezzini <hyouko@gmail.com>
* clients/upsrw.c: upsrw: publish also the maximum length of STRING
rw variables
2013-11-09 Daniele Pezzini <hyouko@gmail.com>
* docs/website/scripts/nut_jquery.js: HCL: Improve readability of
nut_jquery.js
* docs/website/scripts/nut_jquery.js: HCL: make support-level filter
show items with a 'higher or equal' level Reference: https://githu
b.com/networkupstools/nut/issues/48#issuecomment-28134135
* data/driver.list.in: nutdrv_qx: readd HCL's items lost with the
revert of the voltronic merge
* data/driver.list.in: nutdrv_qx: remove superfluous indications from
the HCL
* data/driver.list.in, docs/Makefile.am, docs/blzr-subdrivers.txt,
docs/man/Makefile.am, docs/man/blzr.txt, docs/man/index.txt,
docs/man/nutdrv_qx.txt, docs/man/nutupsdrv.txt, docs/new-
drivers.txt, docs/nutdrv_qx-subdrivers.txt, drivers/Makefile.am,
drivers/blzr.c, drivers/blzr.h, drivers/blzr_blazer-common.c,
drivers/blzr_blazer-common.h, drivers/blzr_mecer.c,
drivers/blzr_mecer.h, drivers/blzr_megatec-old.c, drivers
/blzr_megatec-old.h, drivers/blzr_megatec.c,
drivers/blzr_megatec.h, drivers/blzr_mustek.c,
drivers/blzr_mustek.h, drivers/blzr_voltronic.c,
drivers/blzr_voltronic.h, drivers/blzr_zinto.c,
drivers/blzr_zinto.h, drivers/nutdrv_qx.c, drivers/nutdrv_qx.h,
drivers/nutdrv_qx_blazer-common.c, drivers/nutdrv_qx_blazer-
common.h, drivers/nutdrv_qx_mecer.c, drivers/nutdrv_qx_mecer.h,
drivers/nutdrv_qx_megatec-old.c, drivers/nutdrv_qx_megatec-old.h,
drivers/nutdrv_qx_megatec.c, drivers/nutdrv_qx_megatec.h,
drivers/nutdrv_qx_mustek.c, drivers/nutdrv_qx_mustek.h,
drivers/nutdrv_qx_voltronic.c, drivers/nutdrv_qx_voltronic.h,
drivers/nutdrv_qx_zinto.c, drivers/nutdrv_qx_zinto.h, tools/nut-
usbinfo.pl: nutdrv_qx: rename 'blzr' driver to 'nutdrv_qx'
Reference: http://lists.alioth.debian.org/pipermail/nut-
upsdev/2013-November/006555.html
* docs/stable-hcl.txt, docs/website/css/web-layout.css: Address Issue
#48 (text-based browsers) Reference: https://github.com/networkups
tools/nut/issues/48#issuecomment-28107101
2013-11-08 Arnaud Quette <arnaud.quette@free.fr>
* docs/website/projects.txt: Cleanup NUT related projects
2013-10-25 Daniele Pezzini <hyouko@gmail.com>
* drivers/blazer.c: blazer: Support UPSes that reply '(ACK' when an
instant command succeeds
* drivers/blazer.c: blazer: Fix a discrepancy in the handling of
instant commands Check if the reply we got back from the UPS is
'ACK' also for the commands stored in the array.
2013-10-17 Daniele Pezzini <hyouko@gmail.com>
* docs/man/blazer-common.txt: blazer: Cosmetic changes
* drivers/blazer_ser.c, drivers/blazer_usb.c: blazer: Fix
blazer_{ser,usb} + TESTING Those things are useless when TESTING
is defined
* docs/man/blazer-common.txt: blazer: Fix user manuals
{Serial,USB}-specific sections belong to 'Extra arguments' section
* drivers/blazer_ser.c, drivers/blazer_usb.c: blazer: Versioning
* drivers/blazer.c: blazer: Add more log infos in instcmd
2013-10-16 Daniele Pezzini <hyouko@gmail.com>
* docs/man/Makefile.am, docs/man/blazer-common.txt,
docs/man/blazer.txt, docs/man/blazer_ser.txt,
docs/man/blazer_usb.txt, docs/man/index.txt,
docs/man/nutupsdrv.txt: blazer: Fix {usb,ser} manual Split the old
blazer manual in two manuals named after their executables with a
common source.
* docs/man/blazer.txt: blazer: Fix user manual Fix minor errors Add
ranges Fix test.battery.start (i.e. minutes instead of seconds)
* drivers/blazer.c: blazer: Fix shutdown sequence Split stop pending
shutdown and shutdown itself so that if we have problems stopping
the shutdown (e.g. there's no shutdown pending and the UPS, because
of that, echoes back the command) we can still shutdown the UPS.
* drivers/blazer.c: blazer: Fix minor error in battery guesstimation
We need both battery.voltage.low and battery.voltage.high to
'guesstimate' the battery charge
* drivers/blazer.c: blazer: Fix test.battery.start T00 doesn't make
any sense: the range should be 01-99 minutes
* drivers/blazer.c: blazer: Fix shutdown.return 'SnR0000' is meant
to put the UPS down and not return 'Sn' should be used instead when
ondelay is 0
* drivers/blazer.c: blazer: Fix shutdown delay 'offdelay' as used by
this driver is meant to be in the .2-.9 (12..54 seconds) and 01-10
(60..600 seconds) range.
2013-11-03 Charles Lepple <clepple+nut@gmail.com>
* data/driver.list.in, docs/man/.gitignore, docs/man/Makefile.am,
docs/man/index.txt, docs/man/voltronic_ser.txt,
docs/man/voltronic_usb.txt, drivers/Makefile.am,
drivers/voltronic.c, drivers/voltronic.h, drivers/voltronic_ser.c,
drivers/voltronic_usb.c, tools/nut-usbinfo.pl: Revert "Merge branch
'voltronic-driver'" This reverts commit
de07fc7f5e7f68b91507b2bf3d4d3b92b774c3ed, reversing changes made to
a074844f88ca352780dd881b5fa3c435832d165e. The voltronic
funtionality will be a subdriver of the new blazer driver.
2013-11-04 Daniele Pezzini <hyouko@gmail.com>
* drivers/blzr_voltronic.c: blzr: Fix log message
* drivers/blzr_voltronic.c: blzr: Fix compile-time error Reference:
http://lists.alioth.debian.org/pipermail/nut-
upsdev/2013-November/006549.html
2013-10-25 Daniele Pezzini <hyouko@gmail.com>
* drivers/blzr.c: blzr: Cosmetic changes
* drivers/blzr_megatec-old.c, drivers/blzr_megatec.c,
drivers/blzr_mustek.c, drivers/blzr_zinto.c: blzr: Remove
duplicates in the testing struct
2013-11-04 Daniele Pezzini <hyouko@gmail.com>
* drivers/blzr_blazer-common.c, drivers/blzr_blazer-common.h: blzr:
Fix blzr_blazer-common.{c,h} header comments
2013-10-25 Daniele Pezzini <hyouko@gmail.com>
* docs/blzr-subdrivers.txt, docs/man/blzr.txt, drivers/Makefile.am,
drivers/blzr.c, drivers/blzr_mecer.c, drivers/blzr_mecer.h: blzr:
Add Mecer subdiver (blzr protocol=mecer) A subdriver covering an
idiom similar to the one used by the megatec subdriver, but with
these peculiarities: - if a command/query is rejected or invalid,
the UPS will reply '(NAK\r' - if a command succeeds, the UPS will
reply '(ACK\r'
2013-10-17 Daniele Pezzini <hyouko@gmail.com>
* docs/blzr-subdrivers.txt: blzr: Improve developer manual Add note
on how to group items in blzr2nut array.
* drivers/blzr_voltronic.c: blzr: Fix switch/case Forgot to break at
the end of the case
* docs/man/blzr.txt, drivers/blzr.c, drivers/blzr_voltronic.c: blzr:
Cosmetic changes
2013-10-16 Daniele Pezzini <hyouko@gmail.com>
* data/driver.list.in, docs/Makefile.am, docs/blzr-subdrivers.txt,
docs/man/Makefile.am, docs/man/blzr.txt, docs/man/index.txt,
docs/man/nutupsdrv.txt, docs/new-drivers.txt, drivers/Makefile.am,
drivers/blzr.c, drivers/blzr.h, drivers/blzr_blazer-common.c,
drivers/blzr_blazer-common.h, drivers/blzr_megatec-old.c, drivers
/blzr_megatec-old.h, drivers/blzr_megatec.c,
drivers/blzr_megatec.h, drivers/blzr_mustek.c,
drivers/blzr_mustek.h, drivers/blzr_voltronic.c,
drivers/blzr_voltronic.h, drivers/blzr_zinto.c,
drivers/blzr_zinto.h, drivers/dstate-hal.c, drivers/dstate-hal.h,
tools/nut-usbinfo.pl: blzr: New driver 'blzr' New driver for Q*
UPSes. Based on blazer, usbhid-ups and voltronic driver. This
might address Issue #25
2013-11-04 Charles Lepple <clepple+nut@gmail.com>
* include/Makefile.am: nut_include.h: fail gracefully if git fails
Fix proposed by Jim Klimov.
2013-11-03 Charles Lepple <clepple+nut@gmail.com>
* docs/stable-hcl.txt: HCL: typos
* data/driver.list.in, docs/stable-hcl.txt: HCL: minor cleanup
Remove a duplicate Tripp Lite entry, and add a missing "a".
* docs/stable-hcl.txt: HCL documentation: reword
* data/driver.list.in, docs/acknowledgements.txt: HCL: incorporate
Tripp Lite test results Source:
http://article.gmane.org/gmane.comp.monitoring.nut.user/8173
* docs/Makefile.am, docs/website/Makefile.am: HCL: additional
dependencies Apparently still not complete, though.
* docs/website/scripts/nut_jquery.js: HCL JavaScript: make key case-
insensitive Also special-case the spelling change for Tripp Lite.
TODO: make the value matching case-insensitive as well.
* docs/website/scripts/nut_jquery.js: HCL JavaScript: update the USB-
matching code Slightly more accurate, but later on we should
really track the connection type as a first-class attribute for
each entry in the HCL. Matching the driver name is brittle.
* docs/website/scripts/nut_jquery.js, tools/nut-hclinfo.py: HCL
generation: don't combine driver names The Python and JavaScript
code for generating the HCL was combining adjacent drivers even
when the support level was different. This clutters up the driver
list a bit, but presents a more accurate picture of support levels.
2013-10-28 Michal Soltys <soltys@ziu.info>
* docs/man/apcsmart.txt: apcsmart: minor man update A short note
about availabilty of apcsmart-old.
* docs/man/apcsmart.txt, drivers/apcsmart.c, drivers/apcsmart.h:
apcsmart: string/comment/text trivial changes
2013-10-27 Charles Lepple <clepple+nut@gmail.com>
* tools/nut-scanner/nutscan-device.c: [nut-scanner] Remove unused
variable
2013-10-18 Vaclav Krpec <VaclavKrpec@Eaton.com>
* tools/nut-scanner/nutscan-device.c, tools/nut-scanner/nutscan-
device.h, tools/nut-scanner/nutscan-display.c, tools/nut-
scanner/scan_nut.c: Nutscan fix and enhancement Closes #60 (GitHub
Pull Request via fbohe)
* docs/man/netxml-ups.txt, drivers/mge-xml.c, drivers/mge-xml.h,
drivers/netxml-ups.c: netxml: added RW access, fixed FSD/shutdown
duration bugs, etc. * Fixed bugs in resolution of FSD condition
and computation of shutdown duration. * Added System.* UPS
variables. * Enabled RW access to appropriate UPS variables. *
Added UPS veriables value convertors. * Added support for XML
protocol v3 {GET|SET}_OBJECT query implementing getvar and setvar
routines. * netxml driver man page updated to include info about
the driver-specific configuration parameters. Closes #59 (GitHub
pull request: "Enhancement for netxml driver") Pull request by:
Frédéric BOHE <fredericbohe@eaton.com>
* clients/upsc.c, clients/upscmd.c, clients/upslog.c,
clients/upsrw.c: Fix AIX linkage of do_upsconf_args() Closes #58
(GitHub pull request "Fix AIX build") (cherry picked from commit
5fc7518f97d2738d791c3c77f2257d05e3a9da3b)
2013-10-26 Charles Lepple <clepple+nut@gmail.com>
* configure.in: Define _REENTRANT for all Solaris and AIX platforms.
This is essentially the final commit in pull request #39.
2013-10-24 Frédéric BOHE <fredericbohe@eaton.com>
* drivers/mge-hid.c: Fix wrong OFF status reported when on battery.
UPS.BatterySystem.Charger.PresentStatus.Used is not related to UPS
outputs being on or off but rather to the charger being on or off.
2013-10-16 Daniele Pezzini <hyouko@gmail.com>
* scripts/python/Makefile.am, scripts/python/app/gui-1.3.glade,
.../app/locale/it/LC_MESSAGES/NUT-Monitor.mo,
scripts/python/app/locale/it/it.po, scripts/python/app/nut-
monitor.desktop: Add italian translation
* scripts/python/app/locale/fr/fr.po: Add source of french
translation
* scripts/python/app/gui-1.3.glade.h, scripts/python/app/locale/NUT-
Monitor.pot: Add translation sources
2013-10-16 Frédéric BOHE <fredericbohe@eaton.com>
* drivers/powerware-mib.c, drivers/snmp-ups.c, drivers/snmp-ups.h:
Fix Low Battery detection with ConnectUPS cards The low battery
OID itself cannot be read directly. Low battery alarms OID appears
in an alarm array.
2013-10-02 Arnaud Quette <arnaud.quette@free.fr>
* data/driver.list.in: [HCL] Add support for Eaton 5S Add Eaton 5S
(USB ID 0x0463:0xffff) to the list of usbhid-ups supported models
(reported by Matt Ivie)
2013-10-02 Frédéric BOHE <fredericbohe@eaton.com>
* data/driver.list.in: [HCL] update Eaton UPS
2013-09-30 Frédéric BOHE <fredericbohe@eaton.com>
* drivers/libshut.c: Increment driver revision
2013-09-28 Alf Høgemark <alf@i100.no>
* drivers/bcmxcp.c: bcmxcp: Fix handling of date and time format The
date and time bytes are packed BCD, so it must be properly decoded.
The check for the Julian or Month:Day format was wrong Info on
format taken from http://old.networkupstools.org/protocols/eaton/XC
P_Rev_C1_Public_021309.pdf
* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Add mapping for some
more meters and one more command Add mapping for
PW_SET_TIME_AND_DATE command. Add mapping for input.bypass.voltage,
input.bypass.L1-N.voltage, input.bypass.L2-N.voltage,
input.bypass.L3-N.voltage. Add mapping for input.bypass.frequency.
Add mapping for ups.power.nominal if provided as meter, it was
previously only set on init. Change mapping for ups.realpower for
single phase. Tested on Eaton PW9130.
* drivers/bcmxcp.c: bcmxcp: Remove newline on debug output for
outlets
2013-09-24 Frédéric BOHE <fredericbohe@eaton.com>
* drivers/libshut.c, tools/nut-scanner/scan_eaton_serial.c: Change
RTS init level for PnP devices Setting RTS line to 1 disturbs
communication with some devices using serial plug and play feature.
So we need to initialize it to 0.
2013-09-07 Arnaud Quette <arnaud.quette@free.fr>
* data/driver.list.in: Add support for Forza FX-1500LCD Add Forza
FX-1500LCD (USB ID 0x0665:0x5161) to the list of blazer_usb
supported models (reported by Gabor Tjong A Hung)
* data/driver.list.in: Add Schneider APC AP9630 SNMP management card
Add Schneider APC AP9630 SNMP management card to the list of snmp-
ups supported models. Note that it requires the option
"privProtocol=AES" to work (reported by Tim Rice)
* drivers/.gitignore: Git ignore drivers/voltronic_{ser,usb} Add
drivers/voltronic_{ser,usb} to the list of Git ignored files
2013-08-28 Charles Lepple <clepple+nut@gmail.com>
* packaging/RedHat/.gitignore, packaging/debian/.gitignore,
packaging/mandriva/.gitignore, packaging/opensuse/.gitignore:
Remove .gitignore files from long-gone packaging directory.
2013-08-28 Daniele Pezzini <hyouko@gmail.com>
* docs/website/css/web-layout.css: Improve CSS readability
* docs/stable-hcl.txt, docs/website/css/web-layout.css: Address Issue
#48 Move legend out of filters' block. (HTML+CSS)
2013-08-10 Alf Høgemark <alf@i100.no>
* drivers/bcmxcp.c: bcmxcp: Add instcmd for system test capabilities
based on what UPS support
2013-08-09 Alf Høgemark <alf@i100.no>
* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Code restructure,
declare variables at top of method After re-reading code style,
compiled with -pedantic, and got some warnings, so moved variable
declarations to the top of methods
* drivers/bcmxcp.c, drivers/bcmxcp_io.h, drivers/bcmxcp_ser.c,
drivers/bcmxcp_usb.c: bcmxcp: Reformat code, remove tabs in the
middle of lines. No code changes After re-reading the developer
code style guide, use spaces and not tabs in the middle of lines to
align text
* drivers/bcmxcp.h: bcmxcp: Reformat code, remove tabs in the middle
of lines. No code changes After re-reading the developer code
style guide, use spaces and not tabs in the middle of lines to
align text
* drivers/bcmxcp.c: bcmxcp: Refactor code, use if-else if rather than
4 if statements
2013-08-08 Alf Høgemark <alf@i100.no>
* drivers/bcmxcp.c: bcmxcp: Add parameter to nut_find_infoval to
control debug output We do not want debug output if
nut_find_infoval does not find a mapped value in all cases. For
example, when a command byte is not mapped to a instcmd, we do not
want debug output.
* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Remove
PW_UPDATE_POWER_SOURCE_STATUS_COMMAND, it seems very unlikely to be
used
* drivers/bcmxcp.h: bcmxcp: Cosmetic changes constant definitions. No
code changes.
* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Use command map to
control which instcmd are supported Use the command map info
retrieved from UPS to list all commands supported by the UPS at
debug level 2. Use the info from command map to set up which
instcmd the UPS supports.
* drivers/bcmxcp.c: bcmxcp: Use info_lkp_t structure for mapping
topology info Make code simpler by using the info_lkp_t structure
for mapping value from topology block to text presented to user as
ups.description
* drivers/bcmxcp.c: bcmxcp: Cosmetic commentary fixes and remove some
empty lines. No code changes
* drivers/bcmxcp.c: bcmxcp: Output unsupported alarms on debug level
3, not level 2 The supported alarms in alarm map is outputted at
debug level 2. The unsupported alarms should be outputted at debug
level 3, it is not that interesting. Also remove debug outputted
empty line after table heading line for meter map and alarm map.
* drivers/bcmxcp.c: bcmxcp: Refactor code for setting which alarms
are supported, to avoid code duplication Refactor the code which
checks the alarm map for supported alarms, by making a new method
which checks the alarm bit to see if the alarm is supported.
* drivers/bcmxcp.c: bcmxcp: Only include ups.serial and device.part
if they have a value Only set info about ups.serial and
device.part if the UPS actually report useful info for these.
Remove the handling of space characters as meaning string
termination for ups.serial, this is not done for part number, and
according to bcmxcp spec are these both 16 byte ascii text
messages. Move Nominal output frequence handling up, placing it
just below Nominal output voltage
2013-08-04 Charles Lepple <clepple+nut@gmail.com>
* docs/man/index.txt, docs/man/voltronic_ser.txt,
docs/man/voltronic_usb.txt: voltronic* documentation updates - Add
to man page index - Reword a few sections - Fix typos - Comment out
USB section in voltronic_ser.txt Long-term, we should probably
figure out a better way to maintain two parallel driver pages like
this. The blazer man page is the same for both, with .so links for
the man pages, but then you have USB info in a serial driver page.
For now, voltronic_usb.txt is just a copy of voltronic_ser.txt with
a few _ser-to-_usb replacements.
2013-08-01 Daniele Pezzini <hyouko@gmail.com>
* drivers/voltronic.c: Get rid of 'god.knows' variables
2013-07-26 Arnaud Quette <arnaud.quette@free.fr>
* drivers/powercom-hid.c: Forgotten subdriver version bump
2013-07-25 Arnaud Quette <arnaud.quette@free.fr>
* docs/man/upsc.txt, docs/man/upscmd.txt, docs/man/upsrw.txt:
Complete upsclient commands usage note Add a note for scripting
usage, for upsc, upscmd and upsrw, to state the obvious: only
consider the output from stdout for data requested. stderr may
contain error messages, which can disrupt your script execution.
Address the second task and closes Github issue #30
* clients/upsclient.c: Fix a minor regression in upsclient output
NSS support has introduced a minor regression in upsclient output.
Clients such as upsc, upscmd and upsrw were particularly affected.
This patch restores a default behavior similar to prior versions.
However, "-v" option remains to be implemented. Address the first
task of Github issue #30
2013-07-24 Charles Lepple <clepple+nut@gmail.com>
* docs/website/web-layout.conf: Add GitHub link to website sidebar
2013-07-24 Frédéric BOHE <fredericbohe@eaton.com>
* configure.in: Fix wrong errno reported by connect on Solaris
Closes issue #43
* clients/upsclient.c: Fix connect in multi-threaded environnement on
AIX Closes issue #42
2013-07-23 Frédéric BOHE <fredericbohe@eaton.com>
* clients/upsclient.c: Fix nut-scanner crash on nut server scan,
upscli_sslinit calls upscli_readline which might calls
upscli_disconnect in case of error. upscli_disconnect frees
ups->host and set it to NULL, so it is illegal to use ups->host
after a call to upscli_sslinit.
2013-07-23 Charles Lepple <clepple+nut@gmail.com>
* clients/Makefile.am: Revert "Fix connect in multi-thread
environnement on Solaris" This reverts the previous commit. It
overwrites the CFLAGS which specifies one of the key include
directories.
2013-07-23 Frédéric BOHE <fredericbohe@eaton.com>
* clients/Makefile.am: Fix connect in multi-thread environnement on
Solaris
* tools/nut-scanner/nutscan-device.c, tools/nut-scanner/nutscan-
device.h, tools/nut-scanner/scan_avahi.c, tools/nut-
scanner/scan_eaton_serial.c, tools/nut-scanner/scan_ipmi.c, tools
/nut-scanner/scan_nut.c, tools/nut-scanner/scan_snmp.c, tools/nut-
scanner/scan_usb.c, tools/nut-scanner/scan_xml_http.c: [nut-
scanner] Make sure to return the first device of the list.
2013-07-22 Charles Lepple <clepple+nut@gmail.com>
* docs/download.txt: Download information: reference Git
* configure.in: Bump NUT version to 2.7.1-pre1
2013-07-21 Charles Lepple <clepple+nut@gmail.com>
* include/Makefile.am: nut_version.h: trim tag characters through
first slash
2013-04-27 Charles Lepple <clepple+nut@gmail.com>
* include/Makefile.am: nut_version.h: remove SVN plumbing This
should eliminate the "Unversioned directory" message. The source of
the version information is also listed in nut_version.h Closes
Github issue #15
2013-07-16 Sven Putteneers <sven.putteneers@gmail.com>
* scripts/python/app/NUT-Monitor: NUT-Monitor: parse battery.runtime
as float Without this patch, I get a flood of "Invalid literal for
int with base 10: '28500.00" errors. http://news.gmane.org/find-
root.php?message_id=%3c51E54B99.9030908%40gmail.com%3e
2013-07-10 Arnaud Quette <arnaud.quette@free.fr>
* docs/website/news.txt, docs/website/projects.txt: Reference walNUT
Gnome Shell extension
2013-07-09 Charles Lepple <clepple+nut@gmail.com>
* drivers/riello_ser.c, drivers/riello_usb.c: riello: suppress some
warnings about %lu versus %u
2013-07-09 Elio Parisi <E.Parisi@riello-ups.com>
* drivers/riello.h, drivers/riello_ser.c, drivers/riello_usb.c:
riello: whitespace fixes, and read nominal values only once Bumped
driver versions to 0.02
2013-07-07 Alf Høgemark <alf@i100.no>
* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Add support for reading
topology map and setting ups.description based on it
* drivers/bcmxcp.c: bcmxcp: Initialize variables in
calculate_ups_load method
* drivers/bcmxcp.c: bcmxcp: Output more info hardware capabilities in
debug mode Add some more debug output on driver init, to let us
know what the hardware support. Outputs length of alarm history
log, topology block length and maximum supported command length.
* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Add mapping for
input.quality to meters
* drivers/bcmxcp.c: bcmxcp: Add Alf Høgemark as one of the authors
for the driver
* drivers/bcmxcp.c: bcmxcp: Only calculate ups.load if the UPS does
not report it directly If the UPS does not report a meter mapped
to ups.load, we try to calculate the ups.load, but we do not
calculate it if the UPS can report the ups.load directly
* drivers/bcmxcp.c: bcmxcp: Use defined constants in setvar, and
handle BCMXCP_RETURN_ACCEPTED_PARAMETER_ADJUST Use the defined
constants from header file, instead of magic numbers in setvar
method. Add handling of BCMXCP_RETURN_ACCEPTED_PARAMETER_ADJUST.
Report upsdrv_comm_good on successful execution of setvar to UPS.
* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Add handling of
BCMXCP_RETURN_ACCEPTED_PARAMETER_ADJUST and others in ACK block
Add support for handling more return statuses when exeucting
commands, the most important being
BCMXCP_RETURN_ACCEPTED_PARAMETER_ADJUST, which means the command
was executed. The others added all handles cases where command was
not executed, but you now get a more detailed entry in log as to
why it was not executed.
* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Add mapping for
output.L<phase>.power to meters Not tested on hardware, due to
lack of hardware supporting it
* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Add mapping for
battery.current.total to meters Not tested on hardware, due to
lack of hardware supporting it
2013-07-06 Alf Høgemark <alf@i100.no>
* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Add mapping for
input.realpower to meters input.realpower is not listed in
http://www.networkupstools.org/docs/developer-
guide.chunked/apas01.html, but other drivers use it. Not tested on
hardware, due to lack of hardware supporting it
* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Add mapping for
ambient.1.temperature to meters Not tested on hardware, due to
lack of hardware supporting it
* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Add mapping for
input.power to meters input.power is not listed in
http://www.networkupstools.org/docs/developer-
guide.chunked/apas01.html, but other drivers use it. Not tested on
hardware, due to lack of hardware supporting it
* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Add mapping for
output.powerfactor and input.powerfactor to meters
input.powerfactor is not listed in
http://www.networkupstools.org/docs/developer-
guide.chunked/apas01.html, so a bit unsure if this should be added.
Not tested on hardware, due to lack of hardware supporting it
* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Add mapping for
output.L<phase>.power.percent to meters Not tested on hardware,
due to lack of hardware supporting it
* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: map ups.date and
ups.time to meters. Not testes on hardware, due to lack of
hardware supporting it
* drivers/bcmxcp.h: bcmxcp: Comment which meter map constants are
mapped to nut variables
2013-07-05 Alf Høgemark <alf@i100.no>
* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Add constants for all
bcmxmp meter map, and replace magic numbers with constants Take
all the bcmxcp meter map defined in http://old.networkupstools.org/
protocols/eaton/XCP_Meter_Map_021309.pdf and put them into the
bcmxcp.h file. Update the bcmxcp.c file, replacing magic numbers
for meter map by using the corresponding defined constant.
2013-07-04 Alf Høgemark <alf@i100.no>
* drivers/bcmxcp.c: bcmxcp: Let decode_instcmd_exec also handle short
read from UPS
* drivers/bcmxcp.c: bcmxcp: Add test.panel.start instcmd support
* drivers/bcmxcp.c: bcmxcp: Use one fuction to decode command
execution status in all places To avoid duplicating the logic
which checks the status of command execution at UPS, add a new
function which contains the check, and use that function whenever
we send a command to UPS and get status back from UPS.
* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: Define byte for
choosing which system test to run in header file
* drivers/bcmxcp.c: bcmxcp: Fix outlet number for
outlet.x.shutdown.return if more than 2 outlets
* drivers/bcmxcp.c: bcmxcp: Let upsdrv_shutdown call instcmd for
shutting down To avoid code duplication between upsdrv_shutdown
and instcmd, let the upsdrv_shutdown method first try to issue a
shutdown.return instcmd, and then proceed with shutdown.stayoff if
the shutdown.return failed. This seems to be in line with what the
usbhid driver does.
* drivers/bcmxcp.c: bcmxcp: report upsdrv_comm_good at successful
execution of instcmd
* drivers/bcmxcp.c: bcmxcp: Return more specific error codes from
instcmd Use the available STAT_INSTCMD_FAILED and
STAT_INSTCMD_INVALID as return value from the instcmd method when
applicable, instead of always returning STAT_INSTCMD_UNKNOWN or -1.
2013-07-03 Alf Høgemark <alf@i100.no>
* drivers/bcmxcp.c, drivers/bcmxcp.h: bcmxcp: use command map if
supplied. If UPS supplies command map, use it to control what
commands we register with dstate_addcmd. If UPS does not supply
command map, we register default commands with dstate_addcmd
* data/cmdvartab, drivers/bcmxcp.c: bcmxcp: cosmetic: make changes by
Prachi Gandhi more coherent with rest of driver
* drivers/bcmxcp.c: bcmxcp: Fix method name outputted in debug
message Reference:
http://article.gmane.org/gmane.comp.monitoring.nut.devel/6458
Whitespace was addressed in previous commit (clepple)
2013-07-03 Charles Lepple <clepple+nut@gmail.com>
* drivers/bcmxcp.c: bcmxcp: indentation fixes (no code changes)
2013-07-03 Alf Høgemark <alf@i100.no>
* drivers/bcmxcp.c: bcmxcp: add ups.load and battery.voltage.low
Adapted slightly for bcmxcp branch (original patch was against
master). Bump driver version to 0.28 as well. (clepple) Reference:
http://article.gmane.org/gmane.comp.monitoring.nut.devel/6460
2013-06-18 Daniele Pezzini <hyouko@gmail.com>
* drivers/voltronic.c: Add unknown/unused and commented capability
entries Might be useful for future versions.
* data/driver.list.in: Add devices to HCL
* drivers/voltronic.c, drivers/voltronic_ser.c,
drivers/voltronic_usb.c: Fix warning flag + versioning Some UPSes
seem to reply with a \0 just before the end of the warning flag
(obtained with QWS), as a consequence of that, the string in C is 1
char shorter than expected (the \r is not within the string). ->
Fix voltronic_warning function. Increase driver versions.
* drivers/voltronic.c, drivers/voltronic_ser.c,
drivers/voltronic_usb.c: Fix shutdown.return + versioning Fix
shutdown.return when ondelay = 0 -> split between offdelay < 60 and
offdelay > 60. Increase driver versions.
2013-06-17 Daniele Pezzini <hyouko@gmail.com>
* docs/man/voltronic_ser.txt, docs/man/voltronic_usb.txt: Correct
typos @shutdown.{return,stayoff}
* drivers/voltronic.c, drivers/voltronic_ser.c,
drivers/voltronic_usb.c: Imrove shutdown sequence + versioning
Split shutdown and stopping of pending shutdowns so that if there's
no shutdown pending and the UPS doesn't accept a shutdown.stop in
this situation (i.e. it replies '(NAK') the shutdown procedure
doesn't get halted. Increase version number of drivers.
* data/driver.list.in: Correct typos & add software reference in HCL
* docs/man/voltronic_ser.txt, docs/man/voltronic_usb.txt: Improve
docs layout
* drivers/voltronic_usb.c: Add USBDevice_t structure
* drivers/voltronic_usb.c: Add comment so that autogen rules have the
right comment
* drivers/voltronic_ser.c, drivers/voltronic_usb.c: Correct manpage
references
2013-05-14 Bo Kersey <bo@vircio.com>
* drivers/bestfcom.c: bestfcom: Use fc.idealbvolts for calculating
percent charge 'I have a Best Ferrups 3.1KVA and I noticed that
the percent battery voltage reported from upsc never gets above
69.9%. I believe there is a mistake in the driver. The battery
percentage is calculated based on the High Battery Alarm Setpoint
(59.6V) instead of the Ideal Voltage which is about 54V (4
batteries x 13.6V). I examined the source code and found that the
variable fc.fullvolts is the result of querying parameter 67 from
the UPS. This parameter is defined per Ferrups Tip 503 as: "The
battery voltage at which the UPS sound a High Battery alarm" A
better value to use in determining the percent battery voltage
would be fc.idealbvolts which is calculated in the driver source...
I propose the following patch to fix the battery.charge (% battery
full) reading.' Ref:
http://article.gmane.org/gmane.comp.monitoring.nut.user/7891
2013-05-13 Michal Soltys <soltys@ziu.info>
* docs/nut-names.txt: Add device.uptime to nut-names.txt Also fix
one typo.
* docs/man/apcsmart.txt, drivers/apcsmart.c: apcsmart: allow users to
select non-canonical tty mode The main reason behind this addition
is windows compatibility, see
http://article.gmane.org/gmane.comp.monitoring.nut.user/7762 IGNCR
has been readded earlier in commit
20c52bee77fa0b3ea3c7f8bec25afd103b7ff4a2 - this might be enough to
handle windows behavior, but if it's not the case - using non
canonical processing (same as is present in apcsmart-old) should
solve any pressing issues.
* drivers/apcsmart_tabs.c: apcsmart: add device.uptime to vartab
2013-04-26 Michal Soltys <soltys@ziu.info>
* drivers/apcsmart.c, drivers/apcsmart_tabs.h: apcsmart: remove
APC_DEPR flag APC_{MULTI, PRESENT} are both sufficient for
handling 1:n and n:1 relations
2013-04-22 Michal Soltys <soltys@ziu.info>
* drivers/apcsmart.c: apcsmart: expand APC_MULTI to apc:nut 1:n cases
2013-04-15 Michal Soltys <soltys@ziu.info>
* drivers/apcsmart.c, drivers/apcsmart_tabs.c: apcsmart: change
approach to 2 digit compatibility entries As reported in
http://article.gmane.org/gmane.comp.monitoring.nut.user/7762 - 2
digit values reported through 'b' are really >255V voltage values.
So we match whole 00 - FF set as single (fake) compat entry.
2013-04-16 Michal Soltys <soltys@ziu.info>
* drivers/apcsmart.c: apcsmart: remove strchr() check from
legacy_verify() As vartab doesn't contain characters from
APC_UNR_CMDS.
2013-04-15 Michal Soltys <soltys@ziu.info>
* drivers/apcsmart.h: apcsmart: re-add CR to ignore sets Despite
icanon mode, windows (supposedly) is uncapable of ignoring CR in
fashion analogous to IGNCR flag. See
http://article.gmane.org/gmane.comp.monitoring.nut.user/7762 for
rationale.
* drivers/apcsmart_tabs.c: apcsmart: add regex format to
ambient.0.temperature 'T' might (on older units) also mean "ups
uptime", so we want to distinguish that case gracefully. The
formats are: uptime: 000.0 temp: 00.00
2013-05-03 Andrew Avdeev <andrew.avdeev@gmail.com>
* drivers/powercom-hid.c: PowerCOM BNT-1000AP HID instant commands
Adds a few vendor-specific HID mappings for PowerCOM. Instant
commands supported on UPS [pcm]: beeper.disable - Disable the UPS
beeper beeper.enable - Enable the UPS beeper beeper.toggle - Toggle
the UPS beeper load.off - Turn off the load immediately load.on -
Turn on the load immediately shutdown.return - Turn off the load
and return when power is back shutdown.stayoff - Turn off the load
and remain off test.battery.start.quick - Start a quick battery
test http://article.gmane.org/gmane.comp.monitoring.nut.devel/6435
2013-04-25 Christian Wiese <christian.wiese@securepoint.de>
* tools/nut-scanner/Makefile.am, tools/nut-scanner/scan_usb.c: nut-
scanner: fix scan_usb to remove trailing spaces from output strings
This patch uses rtrim() from libcommon to remove trailing spaces
from serialnumber, device_name and vendor_name. see:
https://github.com/networkupstools/nut/issues/26
2013-04-18 Arnaud Quette <arnaud.quette@free.fr>
* docs/new-drivers.txt: Add a reference to the SNMP subdrivers
chapter
2013-04-15 Michal Soltys <soltys@ziu.info>
* drivers/apcsmart.c, drivers/apcsmart.h, drivers/apcsmart_tabs.c,
drivers/apcsmart_tabs.h: apcsmart: move variable regex matching
into vartab This also allows us to properly validate (in near
future) cases when single apc variable can match multiple nut
variables. Other changes: - adjust rexhlp() to follow 0 for false
and non-0 for true, like in the rest of the functions - remove
valid_cmd() as rexhlp() can be used directly with formats in the
table; furthermore the warning (in case of failure) could be
confusing when we add nut:apc n:1 case
2013-04-11 Arnaud Quette <arnaud.quette@free.fr>
* drivers/libusb.c: Set USB timeout to 5 seconds Set the low level
USB timeout back to the standard 5 seconds. This was set to 4
seconds, for performance reasons, but is now causing issues with
some devices (reported by Stefan "stevenbg", GitHub issue #23)
2013-04-10 Charles Lepple <clepple+nut@gmail.com>
* docs/man/.gitignore: Ignore voltronic_* generated documentation
* drivers/voltronic_usb.c: voltronic_usb: switch to new
is_usb_device_supported() syntax
* tools/nut-usbinfo.pl: Add voltronic_usb driver to USB info
extractor tool
2013-04-10 Daniele Pezzini <hyouko@gmail.com>
* data/driver.list.in, docs/man/Makefile.am,
docs/man/voltronic_ser.txt, docs/man/voltronic_usb.txt,
drivers/Makefile.am, drivers/voltronic.c, drivers/voltronic.h,
drivers/voltronic_ser.c, drivers/voltronic_usb.c: New drivers:
voltronic_ser/voltronic_usb Reference:
http://article.gmane.org/gmane.comp.monitoring.nut.devel/6418
2013-04-10 Elio Parisi <E.Parisi@riello-ups.com>
* drivers/riello.c, drivers/riello.h, drivers/riello_ser.c,
drivers/riello_usb.c: Riello drivers: fix memset() arguments, and
use stdint.h Reference:
http://article.gmane.org/gmane.comp.monitoring.nut.devel/6417
2013-04-04 Émilien Kia <emilien.kia@gmail.com>
* configure.in, docs/new-clients.txt, scripts/Makefile.am,
scripts/README, scripts/java/.gitignore, scripts/java/Makefile.am,
scripts/java/README, scripts/java/jNut/.gitignore,
scripts/java/jNut/README, scripts/java/jNut/pom.xml,
.../main/java/org/networkupstools/jnut/Client.java,
.../java/org/networkupstools/jnut/Command.java,
.../main/java/org/networkupstools/jnut/Device.java,
.../org/networkupstools/jnut/NutException.java,
.../java/org/networkupstools/jnut/Scanner.java,
.../org/networkupstools/jnut/StringLineSocket.java,
.../java/org/networkupstools/jnut/Variable.java,
.../java/org/networkupstools/jnut/ClientTest.java,
.../java/org/networkupstools/jnut/ScannerTest.java,
scripts/java/jNutList/README, scripts/java/jNutList/pom.xml,
.../java/org/networkupstools/jnutlist/AppList.java,
scripts/java/jNutWebAPI/README, scripts/java/jNutWebAPI/pom.xml,
.../jnutwebapi/NutRestProvider.java,
.../jnutwebapi/RestWSApplication.java,
.../jnutwebapi/ScannerProvider.java, .../jNutWebAPI/src/main/webapp
/WEB-INF/web.xml: Remove java related files (jNut) which will be
moved to a separated repository. See issues: -
https://github.com/networkupstools/nut/issues/2 -
https://github.com/networkupstools/nut/issues/22
2013-03-26 Alex Lov <alex@alexlov.com>
* drivers/ietf-mib.c: Fix OID for input.bypass.voltage in ietf-mib.c
Ooops, forgot fix one
* drivers/ietf-mib.c: Fix OIDs for bypass group in ietf-mib.c
Reference http://tools.ietf.org/html/rfc1628#page-12 For bypass
voltage, current and power
2013-03-13 Arnaud Quette <arnaud.quette@free.fr>
* docs/FAQ.txt: Add a FAQ entry for supported but not working USB UPS
2013-03-10 Charles Lepple <clepple+nut@gmail.com>
* scripts/upower/95-upower-hid.rules: upower: update generated rules
file
2013-03-09 Charles Lepple <clepple+nut@gmail.com>
* docs/download.txt: Update VMware ESXi package link (from René
Garcia)
2013-02-28 Charles Lepple <clepple+nut@gmail.com>
* Makefile.am, tools/gitlog2changelog.py: Issue #4: Specify starting
commit to gitlog2changelog.py
2013-02-27 Michal Soltys <soltys@ziu.info>
* drivers/apcsmart_tabs.c: apcsmart: add old APC 600I compatibility
entry Though without 'T' - until we handle situations when single
nut variable is able to correspond to more than one apc var.
Testet-by: Markus Pruehs <apc@markus.pruehs.com>
2013-02-26 Charles Lepple <clepple+nut@gmail.com>
* tools/gitlog2changelog.py: git-changelog: really fixes #4 (missing
entries) The script was discarding any commits which happened to
include the word 'commit'.
* tools/gitlog2changelog.py: git-changelog: remove re.* calls for
simple string matching
2013-02-25 Charles Lepple <clepple+nut@gmail.com>
* Makefile.am, tools/Makefile.am: git-changelog: Fix list of
distributed files
* tools/gitlog2changelog.py: Fixes issue #4: ChangeLog now includes
single-file commits.
* Makefile.am, tools/gitlog2changelog.py: Issue #4: generate
ChangeLog from git logs This seems to generate long ChangeLog
entries in the format we had with svn2cl, but some commits appear
to be missing.
* tools/gitlog2changelog.py: Import gitlog2changelog.py (2008-12-27)
https://github.com/cryos/avogadro/commit/8be9957e5b3b5675701ef2ed00
2aa9e718d4146e#scripts/gitlog2changelog.py
2013-02-25 Émilien Kia <emilien.kia@gmail.com>
* clients/nutclient.cpp, clients/nutclient.h: Add comparison operator
for nut::Device class. Make std::set<nut::Device> work and not
dropping devices anymore.
2012-11-02 Charles Lepple <clepple+nut@gmail.com>
* README, scripts/upower/95-upower-hid.rules: apcupsd-ups: link to
man page from README Patch by Arnaud: https://alioth.debian.org/tr
acker/index.php?func=detail&aid=313846&group_id=30602&atid=411544
2012-10-30 Charles Lepple <clepple+nut@gmail.com>
* docs/man/apcupsd-ups.txt: apcupsd-ups: Update man page with
variables and units
2012-09-28 Charles Lepple <clepple+nut@gmail.com>
* drivers/apcupsd-ups.c, drivers/apcupsd-ups.h: apcupsd-ups:
Additional variables
* drivers/apcupsd-ups.c, drivers/apcupsd-ups.h: apcupsd-ups: Remove
multiplier from ups.load
2012-09-27 Charles Lepple <clepple+nut@gmail.com>
* docs/man/apcupsd-ups.txt, drivers/apcupsd-ups.c: apcupsd-ups:
miscellaneous cleanup
2012-09-27 Andreas Steinmetz
* docs/man/Makefile.am, docs/man/apcupsd-ups.txt,
drivers/Makefile.am, drivers/apcupsd-ups.c, drivers/apcupsd-ups.h:
apcupsd client driver https://alioth.debian.org/tracker/?func=det
ail&atid=411544&aid=313846&group_id=30602
2013-02-23 Charles Lepple <clepple+nut@gmail.com>
* drivers/bcmxcp.c: bcmxcp: remove unused variable
2013-02-16 Charles Lepple <clepple+nut@gmail.com>
* docs/website/news.txt: News: Git conversion
* docs/developers.txt: Update developer documentation for Git
repository
2013-02-21 Arnaud Quette <arnaud.quette@free.fr>
* .gitignore, scripts/HP-UX/.gitignore: Git ignored files completion
2013-02-21 Michal Soltys <soltys@ziu.info>
* drivers/apcsmart_tabs.c: apcsmart: minor fixups to compat. tables
* drivers/apcsmart.c: apcsmart: verify/setup fixups legacy_verify()
- check against commands we always ignore oldapcsetup() - extra
comments, minor flow change
2013-02-17 Charles Lepple <clepple+nut@gmail.com>
* tools/git-svn.authors, tools/svn2cl.authors: Remove obsolete
authors files.
2013-02-16 Arnaud Quette <arnaud.quette@free.fr>
* .gitignore: Git ignored files completion
2013-02-06 Frederic Bohe <fbohe-guest@alioth.debian.org>
* scripts/Solaris/nut.in, scripts/Solaris/postinstall.in: [Solaris]
Fix postinstall user/group, and service start * Fix postinstall
user/group detection/creation. * Fix service start depending on the
mode, and add poweroff command.
2013-02-04 Emilien Kia <kiae.dev@gmail.com>
* include/proto.h: Move __cplusplus/extern "C" begin block before to
fix a problem of ifdef when included in real C++ code.
2013-02-01 Frederic Bohe <fbohe-guest@alioth.debian.org>
* configure.in, scripts/HP-UX/makedepot.sh, scripts/HP-UX/nut.psf.in,
scripts/HP-UX/postinstall.in: [HP-UX] : add postinstal script for
installing services files.
2013-02-01 Arnaud Quette <arnaud.quette@free.fr>
* docs/man/snmp-ups.txt: Update SNMP driver documentation Mentioning
'mib' is not needed anymore since NUT 2.6.2. Also mention 'v3' as
an allowed value for 'snmp_version' (reported by Tim Rice)
2013-01-29 Michal Soltys <msoltyspl-guest@alioth.debian.org>
* drivers/apcsmart.c, drivers/apcsmart.h, drivers/apcsmart_tabs.c,
drivers/apcsmart_tabs.h: apcsmart: implement #311678 (multiple
values per variable) This is a bit more general than the original
request. All variables that return multiple comma-separated
values, are added as *.N.* where 1 <= N <= APC_PACK_MAX; the
variables are stored with temporary name *.0.* in apcsmart_tabs.c,
but only at least 1 and at most 4 are added per update run
(superfluous - if any - are removed), with *.0.* placeholder being
ignored. We assume that the particular variables cannot belong to
the capability set at the same time (as reported by user) -
otherwise we will need a bit more complex handling, including
updates to all setvar functions.
* drivers/apcsmart.c, drivers/apcsmart.h: apcsmart: update logging
logic / apc_read() - logging This mostly adds few macros that
implicitly use or pass caller's name (and in case of hard errors,
line number). This allows removal of a few "failed" / \
"succeeded"
lines (which in practice don't really happen), for example there is
no need for: upslogx(LOG_ERR, "preread_data: apc_write failed");
as any hard error will be reported by apc_write() internally,
providing the place and line number it was called at. Similarly,
some upslogx / upsdebugx calls were wrapped in analogous macros to
provide caller's name automatically. Debug levels (-D) were
adjusted to require only one letter. - apc_read() It's been a bit
more scrutinized: - filling up full caller's buffer is considered
an error; shouldn't happen unless the ups is somehow damaged or
some model is capable of returning more than 512 bytes in one read
(current max I witnessed is around 270 bytes during capability
read) - timeout reads (whether it's allowed or not) cannot really
have any non-0 count, though sanity check could theoretically be
useful in non-canonical mode; commented out code was added for
reference
* drivers/apcsmart.c: apcsmart: enhance prtchr() So it can handle 4
returns with static pointers.
* drivers/apcsmart.c: apcsmart: allow timeout on read in smartmode()
As this function is used to "nudge" ups, we should expect it to
timeout. Also avoids extra log spam.
2013-01-29 Frederic Bohe <fbohe-guest@alioth.debian.org>
* scripts/Solaris/postinstall.in: Use variables to generate Solaris
postinstall script.
* scripts/Solaris/postinstall.in: Enhance the Solaris post install
script.
2013-01-22 Arnaud Quette <arnaud.quette@free.fr>
* docs/man/Makefile.am: Remove duplicate entries for Eaton serial
scan
* include/Makefile.am, tools/nut-scanner/Makefile.am: List missing
header files to be distributed nutscan-serial.h and nut_platform.h
were missing from the distribution
* scripts/Solaris/.gitignore: Subversion ignored files completion
Mark Solaris generated packaging files as Subversion ignored (no
functional changes)
* docs/man/.gitignore, docs/man/Makefile.am, docs/man/index.txt,
docs/man/nut-scanner.txt,
docs/man/nutscan_get_serial_ports_list.txt,
docs/man/nutscan_scan_avahi.txt,
docs/man/nutscan_scan_eaton_serial.txt,
docs/man/nutscan_scan_ipmi.txt, docs/man/nutscan_scan_nut.txt,
docs/man/nutscan_scan_snmp.txt, docs/man/nutscan_scan_usb.txt,
docs/man/nutscan_scan_xml_http.txt, include/nut_platform.h, tools
/nut-scanner/Makefile.am, tools/nut-scanner/nut-scan.h, tools/nut-
scanner/nut-scanner.c, tools/nut-scanner/nutscan-device.h, tools
/nut-scanner/nutscan-display.c, tools/nut-scanner/nutscan-serial.c,
tools/nut-scanner/nutscan-serial.h, tools/nut-
scanner/scan_eaton_serial.c, tools/nut-scanner/scan_nut.c: Add nut-
scanner support for Eaton serial units nut-scanner and libnutscan
now provides respectively an option and functions to detect Eaton
serial devices. The following protocols are supported: SHUT, XCP
and Q1 (patch from Frederic Bohe, with parts from Arnaud Quette,
both for Eaton)
* configure.in: Fix for pthread on HP-UX pthread is compiled on a
stub when -lpthread is not explicitly added. This commit is a
duplicate of [[SVN:3801]], from Frederic Bohe (for Eaton)
* drivers/bcmxcp_ser.c: Change baud-rates ordering for auto-detection
* docs/new-drivers.txt, drivers/serial.c, drivers/serial.h: Add non-
fatal versions of ser_open / ser_set_speed
2013-01-21 Frederic Bohe <fbohe-guest@alioth.debian.org>
* scripts/Solaris/nut.in, scripts/Solaris/postinstall.in: Allow
start/stop of NUT from Solaris packages
2013-01-13 Emilien Kia <kiae.dev@gmail.com>
* clients/cgilib.h, clients/status.h, clients/upsimagearg.h,
clients/upslog.h, clients/upsmon.h, clients/upssched.h,
clients/upsstats.h, include/common.h, include/extstate.h,
include/proto.h, include/state.h, include/upsconf.h, server/conf.h,
server/desc.h, server/netcmds.h, server/netget.h,
server/netinstcmd.h, server/netlist.h, server/netmisc.h,
server/netset.h, server/netssl.h, server/netuser.h,
server/sstate.h, server/stype.h, server/upsd.h, server/upstype.h,
server/user-data.h, server/user.h, tools/nut-scanner/nut-scan.h,
tools/nut-scanner/nutscan-device.h, tools/nut-scanner/nutscan-
init.h, tools/nut-scanner/nutscan-ip.h: Protect header files for
C++ inclusion.
2012-12-19 Arnaud Quette <arnaud.quette@free.fr>
* data/driver.list.in: HCL: Add support for Lyonn CTB-1200 Add Lyonn
CTB-1200 (USB ID 0x0665:0x5161) to the list of blazer_usb supported
models (reported by Martin Sarsale)
* docs/stable-hcl.txt: Clarify expected report for shutdown testing
State explicitly that, for now, a statement that the user has
actually tested the shutdown procedure successfully is enough
(report from Martin Sarsale)
2012-12-19 Frederic Bohe <fbohe-guest@alioth.debian.org>
* scripts/HP-UX/makedepot.sh, scripts/HP-UX/nut.psf.in: Use installed
binaries to create package
2012-12-18 Arnaud Quette <arnaud.quette@free.fr>
* drivers/delta_ups-mib.c: Fix a typo error and current multiplier
factor
* data/driver.list.in, drivers/Makefile.am, drivers/delta_ups-mib.c,
drivers/delta_ups-mib.h, drivers/snmp-ups.c: Support for DeltaUPS
MIB and Socomec Netys RT 1/1 Add preliminary SNMP support for a
new MIB: DeltaUPS MIB, with sysOID ".1.3.6.1.4.1.2254.2.4". The
first known supported devices are Socomec Netys RT 1/1, equiped
with Netvision SNMP card
2012-12-18 Michal Soltys <msoltyspl-guest@alioth.debian.org>
* drivers/apcsmart.c: apcsmart: add update_info() No need for almost
identical update_info_normal() and update_info_all()
* drivers/apcsmart.c: apcsmart: two fixups In poll_data(): we are
not supposed to set variable after its (formally impossible)
removal In upsdrv_shutdown(): wrong comparison
2012-12-14 Arnaud Quette <arnaud.quette@free.fr>
* data/driver.list.in, drivers/powerp-txt.c, drivers/powerpanel.c:
Add support for CyberPower OL3000RMXL2U Add CyberPower
OL3000RMXL2U serial support to the powerpanel driver, text protocol
version (Alioth patch #313910, from Timothy Pearson)
2012-12-13 Arnaud Quette <arnaud.quette@free.fr>
* docs/Makefile.am, docs/new-drivers.txt, docs/snmp-subdrivers.txt,
scripts/subdriver/gen-snmp-subdriver.sh: Helper script to create
SNMP subdrivers stubs Created a new shell script
(scripts/subdriver/gen-snmp-subdriver.sh) to automatically create a
"stub" subdriver. This will make it a lot easier and quicker to
create subdrivers for snmp-ups. A new documentation chapter has
also been added ("How to make a new subdriver to support another
SNMP device")
* drivers/tripplite-hid.c: Add support for newer TrippLite
Smart1500LCD Add newer TrippLite Smart1500LCD (USB ID
0x09ae:0x3016) to the list of usbhid-ups supported models (reported
by Steve Salier)
2012-12-12 Frederic Bohe <fbohe-guest@alioth.debian.org>
* drivers/mge-hid.c: Fix crash with debug level greater or equal to 2
2012-12-10 Michal Soltys <msoltyspl-guest@alioth.debian.org>
* drivers/apcsmart.c: apcsmart: add prtchr() helper Add prtchr()
helper and simplify reporting when we check whether some APC
cmd/var character is or isn't printable.
* drivers/apcsmart_tabs.c: apcsmart: apc_cmdtab[] fixup Earlier
commit that adjusted regex checks, also changed cmd fields for all
instant commands handled by custom functions. We cannot do that, as
they are not detected as supported this way.
2012-12-08 Arnaud Quette <arnaud.quette@free.fr>
* drivers/mge-utalk.c, drivers/mge-utalk.h: Change Martin Loyer's
mail address As per Martin's request.
* drivers/mge-utalk.c: Improve mge-utalk general behavior Make two
adjustments to improve the general behavior: first, send the double
"Z" prior to "Si" command. Second, inter-commands delay \
has been
increased to comply with the specification
2012-12-08 Michal Soltys <msoltyspl-guest@alioth.debian.org>
* drivers/apcsmart.c: apcsmart: serial related stuff a bit more
strict Also: - apc_flush() now loops with >0 condition (otherwise
errored apc_read() might cause inf loop) - ser_comm_good/fail()
were kind of missing in write wrappers
* drivers/apcsmart.c, drivers/apcsmart.h: apcsmart:
sdlist/sdtype/advorder changes - verify 'advorder' with regex -
remove unused defines - as the user is directed towards man page
either way (and without it numbers are kind of meaningless), drop
SDMAX
* drivers/apcsmart.c: apcsmart: setup port after variable
sanitization in upsdrv_initups()
* drivers/apcsmart.c: apcsmart: cleanup dstate ok/stale calls
* drivers/apcsmart.c: apcsmart: getbaseinfo() fixup In extremely
unlikely case of failing write, report it up and act accordingly.
* drivers/apcsmart.c, drivers/apcsmart.h, drivers/apcsmart_tabs.c,
drivers/apcsmart_tabs.h: apcsmart: adjust regex logic A bit
simpler / tighter now.
* drivers/apcsmart.c: apcsmart: add var_string_setup() In theory
deprecate_vars() should also consider APC_STRING variables. In
practice - we don't have any variables that are both APC_MULTI and
APC_STRING - but it's more correct this way, so let's do it.
* drivers/apcsmart.c: apcsmart: cosmetics - code shuffling,
comments, flow - rename query_ups() -> legacy_verify() - add few
lines of help directing to man page
* drivers/apcsmart.c: apcsmart: simplify query_ups() /
proto_verification() Both functions rely now on common variable
verificaion function.
* drivers/apcsmart.c: apcsmart: add var_verify() The function will
be used in subsequent commit for common verification.
* drivers/apcsmart.c: apcsmart: shuffle two functions query_ups()
and oldapcsetup()
* drivers/apcsmart.c: apcsmart: simplify query_ups() This commit
changes query_ups() function and makes it rely on the same
deprecate_vars() logic that protocol_verify() requires. We can
shorten the code a bit now, and it allows us to do more
simplifications in subsequent commits.
* drivers/apcsmart.c: apcsmart: add functions informing about
[un]supported cmds/vars In unified fashion, instead of each
protocol-verification related function doing it on its own.
* drivers/apcsmart.c, drivers/apcsmart.h, drivers/apcsmart_tabs.c,
drivers/apcsmart_tabs.h: apcsmart: minor tidying up comments,
trivial changes, code shuffling ...
* drivers/apcsmart.c: apcsmart: remove unused field 'def' from cchar
In apc_ser_diff() reporting differences between
tcgetattr/tcsetattr, 'def' field was unused (along with related
defines).
2012-12-06 Frederic Bohe <fbohe-guest@alioth.debian.org>
* tools/nut-scanner/nut-scanner.c: Fix nut-scanner compilation
without pthread
2012-12-02 Charles Lepple <clepple+nut@gmail.com>
* drivers/riello_usb.c: riello_usb.c: eliminate uninitialized
variable
2012-11-29 Arnaud Quette <arnaud.quette@free.fr>
* conf/.gitignore: Subversion ignored files completion Mark
upsmon.conf.sample as Subversion ignored, since it is now generated
from a .in template file (no functional changes)
* conf/Makefile.am, conf/upsmon.conf.sample,
conf/upsmon.conf.sample.in, configure.in: Adapt upsmon.conf sample
to use configured values The sample upsmon.conf provided now
adapts RUN_AS_USER value, and NOTIFYCMD / POWERDOWNFLAG base path
to the user configured values
2012-11-28 Arnaud Quette <arnaud.quette@free.fr>
* drivers/riello.c, drivers/riello_ser.c, drivers/riello_usb.c: Minor
improvements to Riello drivers Fix ups.power.nominal name in
Riello drivers, and its value for GPSER protocol(riello_ser).
device.mfr was also changed in both drivers, and revisions were
bumped to 0.02 (patch from Elio Parisi, Riello)
* data/driver.list.in, drivers/Makefile.am, drivers/openups-hid.c,
drivers/openups-hid.h, drivers/usbhid-ups.c, scripts/upower/95
-upower-hid.rules: Official support for Minibox openUPS Intelligent
UPS Add a new usbhid-ups subdriver to handle Minibox openUPS
Intelligent UPS (USB ID 0x04d8:0xd004) (patch from Nicu Pavel,
Mini-Box.Com)
2012-11-28 Charles Lepple <clepple+nut@gmail.com>
* conf/upsmon.conf.sample, docs/man/upsmon.conf.txt: Update
references to pager.txt
2012-11-27 Frederic Bohe <fbohe-guest@alioth.debian.org>
* data/driver.list.in, docs/man/genericups.txt: Add information about
Eaton Management Card Contact
2012-11-25 Arnaud Quette <arnaud.quette@free.fr>
* drivers/riello.c, drivers/riello.h, drivers/riello_ser.c,
drivers/riello_usb.c: Minor improvements to Riello drivers Fix
functions and variables names to use English language. Also fix
warnings reported by Mac OS X Buildbot and Charles Lepple (patch
from Elio Parisi, Riello)
2012-11-21 Arnaud Quette <arnaud.quette@free.fr>
* docs/acknowledgements.txt: Complete Acknowledgements with a Riello
entry Riello deserves a dedicated entry in the Supporting UPS
manufacturers, for having provided protocols information and
drivers implementations
* docs/man/.gitignore: Subversion ignored files completion Mark
riello_ser and riello_usb HTML manpages as Subversion ignored (no
functional changes)
* data/driver.list.in, docs/man/.gitignore, docs/man/Makefile.am,
docs/man/riello_ser.txt, docs/man/riello_usb.txt,
drivers/.gitignore, drivers/Makefile.am, drivers/riello.c,
drivers/riello.h, drivers/riello_ser.c, drivers/riello_usb.c, tools
/nut-usbinfo.pl: Official support for Riello serial and USB devices
Add two new drivers, riello_ser and riello_usb, to support the
whole ranges of Riello devices: IDG, IPG, WPG, NPW, NDG, DVT, DVR,
DVD, VST, VSD, SEP, SDH, SDL, SPW, SPT, MCT, MST, MCM, MCT, MHT,
MPT and MPM. This completes the official Riello protocols
publication, that happened in May 2012 (developed by Elio Parisi,
from Riello)
2012-11-20 Arnaud Quette <arnaud.quette@free.fr>
* clients/upsclient.h, server/nut_ctype.h: Fix NSS include directives
The current NSS include directives (nss/nss.h) were incorrect.
These were failing on Redhat systems, and working on some others
because of the default include path (reported by Michal Hlavinka,
from Redhat)
2012-11-19 Arnaud Quette <arnaud.quette@free.fr>
* data/driver.list.in: HCL: Add support for Aviem Power RT
1000-3000VA Add Aviem Systems - Aviem Power RT 1000-3000VA to the
list of blazer_ser supported models (reported by Michael
Dobrovitsky)
2012-11-19 Emilien Kia <kiae.dev@gmail.com>
* tools/nut-scanner/nutscan-device.c: Fix a memory leak in scanner.
2012-11-13 Arnaud Quette <arnaud.quette@free.fr>
* docs/man/.gitignore: Complete the list of Subversion ignored files
Commit r3778 was missing generated HTML files (no functional
changes)
* docs/man/Makefile.am: Fix installation of libnutclient manual pages
Commit r3777 fixed the test target, but libnutclient manual pages
were not actually installed
* docs/man/.gitignore, lib/.gitignore: Complete the list of
Subversion ignored files The merge of NSS and libnutclient
branches have left some new generated files (no functional changes)
* docs/man/libnutclient_commands.txt,
docs/man/libnutclient_devices.txt,
docs/man/libnutclient_general.txt, docs/man/libnutclient_misc.txt,
docs/man/libnutclient_tcp.txt, docs/man/libnutclient_variables.txt:
Fix Buildbot failures on previous commit (man pages) The merge of
the libnutclient branch caused a failure of the 'distcheck-light'
test target. Manual pages documentation in this branch uses a
mechanism to generate multiple manpages from one source file. This
was however conflicting with a Makefile rule, that requires the
generated file to have the same name as the source file. Applies
the same principle by adding the content of the Header section to
the NAME commands list. Also fix a typo error in the Header section
of libnutclient_devices
2012-11-13 Emilien Kia <kiae.dev@gmail.com>
* clients/Makefile.am, clients/nutclient.cpp, clients/nutclient.h,
configure.in, docs/man/Makefile.am, docs/man/index.txt,
docs/man/libnutclient.txt, docs/man/libnutclient_commands.txt,
docs/man/libnutclient_devices.txt,
docs/man/libnutclient_general.txt, docs/man/libnutclient_misc.txt,
docs/man/libnutclient_tcp.txt, docs/man/libnutclient_variables.txt,
docs/new-clients.txt, lib/Makefile.am, lib/README,
lib/libnutclient.pc.in: Merge libnutclient (libcpp) branch Pull
Request #2: "High level C and C++ libnutclient" from
https://github.com/clepple/nut/pull/2 . Hand-merged into SVN trunk
from commit: 701cc571f4f8578e9c82b13c1e9eab509a41cd7f
2012-11-08 Frederic Bohe <fbohe-guest@alioth.debian.org>
* docs/man/usbhid-ups.txt, drivers/usbhid-ups.c: Add a command line
to usbhid-ups to activate the max_report tweak.
* drivers/apc-hid.c, drivers/libhid.c: Fix tweak for APC Back-UPS
since it seems to break Back-UPS 700 connectivity (reported by
Denis Serov). Adding some more comments on UPS which need and
which do not need the tweak. Refactored the detection code.
2012-11-07 Arnaud Quette <arnaud.quette@free.fr>
* scripts/subdriver/gen-usbhid-subdriver.sh: Fix USB HID subdriver
generation tool This tool has not been updated since timestamps
were added to driver debug traces. It was thus producing erroneous
results (reported by Nicu Pavel)
2012-11-01 Arnaud Quette <arnaud.quette@free.fr>
* drivers/snmp-ups.c: Fix a crash on outlets management snmp-ups was
crashing when the number of outlets was equal to zero
2012-10-31 Arnaud Quette <arnaud.quette@free.fr>
* docs/man/.gitignore, docs/man/blazer.txt: Fix blazer manual pages
generation to generate blazer, blazer_ser and blazer_usb manual
pages. The same manual page is now distributed and available under
these 3 names (warning to packagers)
* docs/man/Makefile.am, docs/man/asciidoc.conf: Fix manpage
refmiscinfo attributes and multiple NAME refmiscinfo attributes
were previously specified through asciidoc.conf. This approach
prevented from specifying and generating multiple manual pages from
a single source. Moreover, manversion (pointing NUT version) was
mistyped, and thus omitted. Makefile rules now directly define
refmiscinfo through attributes, and allow to solve the long
standing blazer / blazer_ser / blazer_usb related issue, and the
upcoming libnutclient one
2012-10-19 Arnaud Quette <arnaud.quette@free.fr>
* drivers/cps-hid.c, drivers/idowell-hid.c, scripts/subdriver/gen-
usbhid-subdriver.sh: Replace missing occurrences in previous commit
* docs/hid-subdrivers.txt, drivers/libhid.c, scripts/Makefile.am,
scripts/subdriver/gen-usbhid-subdriver.sh, scripts/subdriver/path-
to-subdriver.sh: Rename usbhid subdriver generation script This
script was previously named path-to-subdriver.sh, which was not
enough meaningful. The renaming to gen-usbhid-subdriver.sh also
makes sense with a potential gen-snmp-subdriver.sh
* data/driver.list.in: HCL: Add support for Apollo 850VA Add Apollo
850VA (USB ID 0x0665:0x5161) to the list of blazer_usb supported
models (reported by Mike Raath)
2012-10-15 Arnaud Quette <arnaud.quette@free.fr>
* configure.in, scripts/systemd/nut-driver.service.in: Fix driver
path in systemd driver unit The driver path, in nut-
driver.service, was not expanded correctly (reported by Marc
Rechté)
2012-10-15 Michal Soltys <msoltyspl-guest@alioth.debian.org>
* data/driver.list.in: HCL: add info about new APC models Info about
new SMT, SMX and SURTD models which require additional card for
"legacy" smart protocol.
2012-10-15 Arnaud Quette <arnaud.quette@free.fr>
* configure.in: Only fail if SSL was explicitly requested
Configuration should not abort if neither OpenSSL nor Mozilla NSS
has been found, and if SSL was not explicitly requested by the
user. This fixes the Buildbot compilation failure on Aix (build
#206)
2012-10-12 Charles Lepple <clepple+nut@gmail.com>
* tools/git-svn.authors, tools/svn2cl.authors: Update Emilien Kia's
email address
2012-10-11 Arnaud Quette <arnaud.quette@free.fr>
* docs/Makefile.am: Fix Solaris compilation failure
2012-10-10 Arnaud Quette <arnaud.quette@free.fr>
* README: Spell check fix (test)
* .gitignore, configure.in, docs/.gitignore, docs/Makefile.am, docs
/nut-qa.txt, docs/nut.dict: Spell checking framework implementation
Implement a framework to spell check documentation source files,
using Aspell. This includes an interactive build target (make
spellcheck-interactive), and an automated one (make spellcheck),
mainly for QA / Buildbot purpose. Note that a base NUT dictionnary
is also available (docs/nut.dict), providing a glossary of terms
related to power devices and management
* drivers/tripplite_usb.c: Remove POD ("Plain Old Documentation")
With the approval of the author (Charles Lepple), remove POD
("Plain Old Documentation"). This embedded documentation was
redundant, and is probably out of date, with respect to the
AsciiDoc version
* drivers/powercom.c, drivers/powercom.h, drivers/upscode2.c: Remove
unnecessary RCS $Id lines
2012-10-05 Arnaud Quette <arnaud.quette@free.fr>
* tools/nut-scanner/nut-scan.h: Fix compilation error Define
IPMI_PRIVILEGE_LEVEL_ADMIN value, in case FreeIPMI is not available
2012-10-04 Arnaud Quette <arnaud.quette@free.fr>
* docs/man/nut-scanner.txt, drivers/nut-ipmipsu.c, tools/nut-scanner
/nut-scan.h, tools/nut-scanner/nut-scanner.c, tools/nut-
scanner/scan_ipmi.c: Support power supplies scan over the network
nut-scanner can now scan for power supplies with IPMI over LAN.
This is currently limited to IPMI 1.5 only
2012-10-03 Arnaud Quette <arnaud.quette@free.fr>
* docs/acknowledgements.txt: Update acknowledgements
2012-09-28 Charles Lepple <clepple+nut@gmail.com>
* drivers/.gitignore: Cleanup of svn:ignore list in drivers/ (no code
change)
2012-09-27 Charles Lepple <clepple+nut@gmail.com>
* tools/git-svn.authors, tools/svn2cl.authors: Welcome, Václav! (SVN
username mappings)
2012-09-21 Arnaud Quette <arnaud.quette@free.fr>
* docs/nut-qa.txt: Update the link to the Ubuntu QRT script
2012-09-19 Arnaud Quette <arnaud.quette@free.fr>
* drivers/nut-libfreeipmi.c, m4/nut_check_libfreeipmi.m4, tools/nut-
scanner/scan_ipmi.c: Support for FreeIPMI 1.1.x and 1.2.x (#2)
Prepare for supporting API changes in FreeIPMI 1.1.x and 1.2.x.
This 2nd patch, which completes [[SVN:3675]], addresses FRU API
changes, and removes code redundancy. This code has been tested
with FreeIPMI 0.8.12 and the latest [[FreeIPMI SVN]] trunk r9505
(reported as 1.2.0.beta2 by pkgconfig)
* docs/download.txt, docs/website/news.txt: Update Windows package
publications for 2.6.5-3
2012-09-17 Arnaud Quette <arnaud.quette@free.fr>
* docs/download.txt, docs/website/news.txt: Update Windows package
publications for 2.6.5-2
2012-09-12 Arnaud Quette <arnaud.quette@free.fr>
* drivers/bcmxcp_usb.c: Fix data reception loop The new data
reception algorithm was trying to get more data than it should
(patch from Rich Wrenn)
2012-09-10 Frederic Bohe <fbohe-guest@alioth.debian.org>
* drivers/apc-hid.c, drivers/apc-hid.h, drivers/libhid.c: Add a tweak
for APC Back UPS ES APC Back UPS ES have a buggy firmware which
overflows on ReportID 0x0c, i.e.
UPS.PowerSummary.RemainingCapacity. This results in battery.charge
not being exposed and endless reconnections on systems with libusb
reporting EOVERFLOW. And it results on a failure to init the driver
for systems with libusb not reporting EOVERFLOW but EIO (i.e. on
Windows).
* tools/nut-scanner/nut-scanner.c: [nut-scanner] Fix a crash when no
start IP is provided.
* drivers/apc-hid.c, drivers/bcmxcp_usb.c, drivers/belkin-hid.c,
drivers/blazer_usb.c, drivers/cps-hid.c, drivers/idowell-hid.c,
drivers/liebert-hid.c, drivers/mge-hid.c, drivers/powercom-hid.c,
drivers/richcomm_usb.c, drivers/tripplite-hid.c,
drivers/tripplite_usb.c, drivers/usb-common.c, drivers/usb-
common.h: Extend USB device support check (from Arnaud Quette) Use
USBDevice_t structure in is_usb_device_supported(), instead of
direct VendorID and ProductID. This allows to pass it to the
specific processing handler for broader check
2012-09-07 Leo Arias <elopio-guest@alioth.debian.org>
* conf/nut.conf.sample: Update nut.conf.sample (grammar and
documentation) https://alioth.debian.org/tracker/?func=detail&ati
d=411544&aid=313762&group_id=30602
2012-08-14 Arnaud Quette <arnaud.quette@free.fr>
* NEWS, UPGRADING, configure.in, data/driver.list.in,
docs/Makefile.am, docs/configure.txt, docs/documentation.txt,
docs/download.txt, docs/images/eaton-logo.png,
docs/images/hostedby.png, docs/images/simple.png,
docs/man/.gitignore, docs/man/Makefile.am, docs/man/index.txt,
docs/man/macosx-ups.txt, docs/man/mge-shut.txt,
docs/man/nutscan.txt, docs/man/nutscan_scan_avahi.txt,
docs/man/powercom.txt, docs/man/skel.txt, docs/nut-names.txt,
docs/website/.gitignore, docs/website/Makefile.am, docs/website/css
/web-layout.css, docs/website/news.txt, docs/website/old-news.txt,
docs/website/projects.txt, docs/website/web-layout.conf,
drivers/.gitignore, drivers/Makefile.am, drivers/macosx-ups.c,
drivers/mge-hid.c, drivers/powercom-hid.c, drivers/skel.c, drivers
/usbhid-ups.c, drivers/usbhid-ups.h, m4/nut_check_libltdl.m4: Merge
from trunk [[SVN:3679]] to [[SVN:3718]] to ssl-nss-port
2012-08-09 Arnaud Quette <arnaud.quette@free.fr>
* docs/website/.gitignore, docs/website/Makefile.am,
docs/website/news.txt, docs/website/old-news.txt: Integrate
archived news
* docs/nut-names.txt, drivers/mge-hid.c: Add shutdown ability switch
to Eaton units Eaton HID units (using usbhid-ups or [new,old]mge-
shut) were missing a data mapping to allow the change of the
shutdown ability switch. The result was that the UPS was not
powered off, even if all the protocol commands were sent (reported
by Daniel O'Connor)
* docs/download.txt, docs/website/news.txt: Update Windows package
publications for 2.6.5-1
* docs/man/.gitignore, docs/man/index.txt: Added macosx-ups manual
page to the index Also add generated groff and HTML contents to
the list of Subversion ignored files
|
| 2018-03-28 08:23:34 by matthew green | Files touched by this commit (3) |
Log message: avoid printing "No error" a bunch of times. this was spamming my syslog. |
New packages: