Log message:
Recursive bump for perl5-5.28.0

Log message:
Update to 4.11

Upstream changes:
podlators 4.11 (2018-05-07)

    [Pod::Text] The default value of the sentence option is false, not
    true, and has been since at least 2.0.0.  Fix the documentation to
    match.  Thanks, eponymous alias.  (#124461)

    [Pod::Text::Termcap] Correctly honor the width option, which was being
    ignored due to a bug in interpreting user-supplied options.  Thanks,
    eponymous alias.  (#124447)

    [Pod::Text::Color, Pod::Text::Termcap] Fix a subtle wrapping bug with
    long =item text that would cause lines to be wrapped when they didn't
    need to be.  Thanks, eponymous alias.

    [Pod::Text::Color, Pod::Text::Termcap] Clear any text attributes at
    the end of each line and reinstate them at the start of the next line,
    since some pagers (less -R in particular) clear all text attributes at
    the end of each line and were therefore not correctly showing
    attributes in wrapped text.  Thanks, eponymous alias.

    [Pod::Text::Termcap] Correctly get the terminal width from Term::Cap
    information when COLUMNS isn't set, instead of getting a string value
    that later cannot be used numerically.

    Specifying "none" for the errors option of Pod::Man and Pod::Text no
    longer results in an errata section in the generated documentation,
    matching the documented behavior.  Thanks, Olly Betts.

    Fix order of SEE ALSO section in manual pages to match the
    recommendation of perlpodstyle.

    Use https for all eyrie.org URLs.

    Add SPDX-License-Identifier headers to all substantial source files.

Log message:
p5-podlators: update to 4.10.

podlators 4.10 (2017-12-25)

    [Pod::Man] Change man page references and function names to bold
    instead of italic, following the current Linux man page standard.  The
    previous formatting was taken from Solaris, and it seems safe to say
    that the Linux man page formatting conventions are now much more
    widely followed than Solaris's.  Patch from Guillem Jover.

    [Pod::Man] Revert the .IX handling code to the earlier version from
    Bjarni Ingi Gislason but add the trailing backslashes that should
    hopefully avoid blank page issues on HP-UX.  This fixes a warning
    regression when man is run with warnings enabled.  (Debian Bug#847972)

    [Pod::Man] Wrap the output file descriptor in a glob before passing it
    to PerlIO::get_layers so that the layer check works properly.
    Previously, this code would throw a warning if given a scalar not
    wrapped in a glob and not detect layers properly.  Patch from Zefram.
    (#122521)

    Produce a proper diagnostic when given empty input on standard input
    with no other arguments to pod2man or pod2text.  Reported by Guillem
    Jover.

Log message:
Recursive revbump from lang/perl5 5.26.0

Log message:
Update to 4.09

Upstream changes:
podlators 4.09 (unreleased)

    [Pod::Text] Use Pod::Simple's logic to determine the native code
    points for NO BREAK SPACE and SOFT HYPHEN instead of hard-coding the
    ASCII values.  Hopefully fixes the case of mysterious disappearing
    open brackets on EBCDIC systems.  (#118240)

podlators 4.08 (2016-09-24)

    [Pod::Man] Partially revert change in 4.00 to require the name option
    (--name to pod2man) when generating man pages from standard input.
    Historically, pod2man silently tolerated this, and there turned out to
    be a lot of software that depended on this, making the change too
    disruptive.  Instead, silently set the man page title to STDIN in this
    case, but warn about it in the documentation.  (#117990)

    [Pod::Man] Fix rendering bug for "TRUE (1)", which was recognized as
    needing small caps and then erroneously as a man page reference,
    resulting in escaped nroff.  (Found by Dan Jacobson with the
    XML::LibXML::Element man page.)  (Debian Bug#836831)

    [Pod::Man] Fix rendering bug causing "\s0(1)" to be mistakenly marked
    as a man page reference, later confusing backslash escaping.

    [Pod::Man] Add new lquote and rquote options (and corresponding
    --lquote and --rquote flags to pod2man) to set the left and right
    quotes for C<> text independently.  (#103298)

    Remove test for nested L<> markup, since an upcoming version of
    Pod::Simple will drop support for this.  (#114075)

Log message:
Update to 4.07

Upstream changes:
podlators 4.07 (2016-03-20)

    [Pod::Man] Avoid undefined variable warnings when determining the
    title for a Perl module at the top level of a distribution.  Thanks,
    Dave Mitchell.  (#112625)

    [Pod::Man] Fix font resets with nroff when fixed-width fonts are used
    in the label for an =item.  Previously, italic was being ended with
    \f(CW even in nroff mode, which, with groff, only changes the font to
    fixed-width and doesn't reset to a non-italic font.  Thanks, Paul
    Townsend.  (#98199)

    [Pod::Man] Suppress warnings about a missing Encode module if
    PERL_CORE is set in the environment.  Due to build ordering during
    Perl core builds, Encode is expected to not yet be available during
    the build step that sets PERL_CORE.  Thanks, Dave Mitchell.

Log message:
Bump PKGREVISION for perl-5.24.

Log message:
Update to 4.06

Upstream changes:
podlators 4.06 (2016-01-31)

    Handle scripts ending in .com on VMS systems and don't generate the
    man page for perlpodstyle when built as part of Perl core.  These are
    hopefully the last two changes required to fully merge with Perl core
    without core having to maintain a separate build system.  Thanks,
    Craig A. Berry.

    During build, generate the pod2text and pod2man man pages from the
    *.PL files rather than the generated scripts.  This may be required
    due to the different script extensions on VMS hosts.

    Rename perlpodstyle back to perlpodstyle.pod, since we no longer need
    the workaround for Module::Build's POD handling.

Log message:
Update to 4.05

Upstream changes:
podlators 4.05 (2016-01-16)

    Switch back to generating pod2man and pod2text from *.PL files.  While
    ExtUtils::MakeMaker can fix the #! line, it can't handle all non-UNIX
    operating systems, and the *.PL script generation code can.  This will
    hopefully remove the need for Perl core to maintain a separate copy of
    the *.PL wrapper scripts as well.  Thanks, Craig A. Berry.

    [Pod::Man] Fall back (with a warning) to non-utf8 behavior if the utf8
    option is specified but the Encode module is not available.  This is
    useful in some cross-compilation situations.  Thanks, Niko Tyni.

    Don't try to remove the temporary directory used by tests in the tests
    themselves, since this races with other tests run in parallel.
    Instead, just remove it on make clean.

    Provide a mailto address in bug tracking metadata, use the shorter
    form of the RT bug tracker URL, and fix the license value to match the
    new metadata specification.

podlators 4.04 (2016-01-02)

    Fix portability of the t/docs/synopsis.t test to Windows.  It was
    assuming UNIX path delimiters when filtering out files it didn't
    intend to test.

    Don't include .travis.yml in the distribution so that it isn't picked
    up by Perl core.  Thanks, Karen Etheridge.  (#110385)

    Add homepage information to the CPAN metadata and change the canonical
    repository location to GitHub.

podlators 4.03 (2015-12-06)

    Fix tests when POD_MAN_DATE or SOURCE_DATE_EPOCH are already set in
    the environment.  Thanks, Niko Tyni.  (Debian Bug#807086)

    Continue general improvements and refactoring of the test suite to
    make it more maintainable and clean out duplicate or unnecessary code.

podlators 4.02 (2015-12-02)

    For versions of Perl prior to 5.11, install the modules into the Perl
    core module directories, since in those versions site modules did not
    take precedence over Perl core modules.  Thanks, Peter Rabbitson.
    (#110024)

podlators 4.01 (2015-12-01)

    [Pod::Text::Termcap] Do not override the TERMPATH environment variable
    if it's already set.  This should fix the test suite with Term::Cap
    1.16 (which has a bug in termcap handling if TERMPATH doesn't point to
    a valid file).  Also document the manipulation of TERMPATH.

    Revert the switch to Module::Build as the build system.  This creates
    a circular dependency with Module::Build, since it wants a newer
    version of Pod::Man than in Perl versions prior to 5.10.1.  Instead,
    add the new metadata to Makefile.PL and stick with a single build
    system that will also work inside Perl core.

podlators 4.00 (2015-11-28)

    Increase the version number of the package to be larger than any of
    the previous version numbers of any of the modules, and change all
    modules to use the same version as the overall podlators package.
    Switch to a simple decimal version number to avoid complexity with
    v-strings and portability to old versions of Perl.

    podlators now requires Perl 5.006 or later.  All modules enable
    warnings.  Please report any unexpected or confusing warnings as bugs
    in the bug tracker.

    [pod2man] In previous versions, the -r or --release option could be
    specified without an argument and was interpreted as setting that
    value to the empty string.  That never made a great deal of sense, and
    the original change to Perl was apparently because no one realized one
    could pass the empty string as the argument value.  The argument is
    now mandatory, but may be the empty string, which will cause some
    *roff implementations to use the system default.

    Allow any even number of characters to be specified as the quote marks
    for Pod::Text and Pod::Man (and the corresponding --quotes options of
    pod2text and pod2man), rather than being artificially limited to one-
    or two-character quotes.  The first half of the string will be used as
    the left quote and the second half as the right quote.  This allows
    Unicode characters or groff escapes like \(lq and \(rq to be used.
    (Partly addresses #103298)

    [Pod::Man] Attempt to detect if the input came from a pipe and
    therefore has a completely unhelpful (and nonreproducible) source file
    name, and diagnose this as an error.  Document that the name option
    (--name to pod2man) is required when processing POD source from
    standard input.  (Debian Bug#777405)

    [Pod::Man] Honor the environment variable SOURCE_DATE_EPOCH and use it
    as the timestamp from which to derive the left-hand footer if the date
    option is not set, overriding the timestamp of the input file.  This
    is primarily useful to ensure reproducible builds of the same output
    file given the same souce and Pod::Man version, even when file
    timestamps may not be consistent.  Thanks, Niko Tyni.  (Debian
    Bug#801621)

    [Pod::Man] Honor the environment variable POD_MAN_DATE and use its
    contents, if set, as the value of the left-hand footer if the date
    option is not set, overriding the timestamp of the input file.  This
    was an earlier version of SOURCE_DATE_EPOCH, but has been supported in
    Debian for a while and doesn't serve exactly the same purpose, so both
    continue to be supported.  Thanks, Niko Tyni.

    [Pod::Man] The default left-hand footer date is now based on UTC
    rather than the local time zone to make the output more reproducible.
    Thanks, Chris Lamb.  (Debian Bug#780259)

    [Pod::Man] Simplify the preamble code for handling the F register and
    index entries, and add backslashes after the braces in the preamble
    code for handling the F register to avoid introducing a spurious page
    break before at the first page with AT&T *roff.  Thanks, Carsten
    Kunze and Daphne Pfister.  (#92979)

    [Pod::Man] Support setting the left-hand footer to the empty string.

    Fix documentation of the utf8 option to Pod::Man and Pod::Text, and
    the corresponding -u option to pod2man and pod2text, to reflect that
    Pod::Simple now autodetects Latin-1 and UTF-8 but warns.

    More clearly document the options that set values in the .TH header in
    the pod2man and Pod::Man documentation.  Thanks, Guillem Jover.
    (#103297)

    [Pod::Text] Fix encoding handling in documents that start without an
    encoding declaration and then declare an encoding partway through.
    Previously, this would result in attempts to print wide characters if
    there were non-ASCII characters in the document.  Thanks, Magnolia K.
    (#101722)

    [Pod::Text] Change the documentation to not say Pod::Text only
    generates ASCII text.  (#89355)

    Switch the preferred module build system to Module::Build, but still
    provide a Makefile.PL file for backward compatibility and for the use
    of Perl core.  (#108714)

    Installation of this package no longer tries to overwrite the Pod::Man
    and Pod::Text modules that come with Perl core, and instead relies on
    the normal precedence rules in Perl's module search path that prefer
    locally-installed modules over core modules.

    Rename NEWS to Changes to match the normal Perl convention.

    Work around a bug in Term::Cap 1.16 that caused the test suite to fail
    by forcing a setting of TERMPATH to a termcap file provided by the
    test suite while running tests.  (#98272)

Log message:
Add SHA512 digests for distfiles for textproc category

Problems found locating distfiles:
	Package cabocha: missing distfile cabocha-0.68.tar.bz2
	Package convertlit: missing distfile clit18src.zip
	Package php-enchant: missing distfile php-enchant/enchant-1.1.0.tgz

Otherwise, existing SHA1 digests verified and found to be the same on
the machine holding the existing distfiles (morden).  All existing
SHA1 digests retained for now as an audit trail.