Log message:
x11: Replace RMD160 checksums with BLAKE2s checksums

All checksums have been double-checked against existing RMD160 and
SHA512 hashes

Unfetchable distfiles (fetched conditionally?):
./x11/py-qt4/distinfo PyQt4_gpl_mac-4.12.3.tar.gz

Log message:
x11: Remove SHA1 hashes for distfiles

Log message:
all: migrate several HOMEPAGEs to https

pkglint --only "https instead of http" -r -F

With manual adjustments afterwards since pkglint 19.4.4 fixed a few
indentations in unrelated lines.

This mainly affects projects hosted at SourceForce, as well as
freedesktop.org, CTAN and GNU.

Log message:
xf86-video-amdgpu: update to 19.1.0.

I'm pleased to announce the 19.1.0 release of xf86-video-amdgpu, the
Xorg driver for AMD Radeon GPUs supported by the amdgpu kernel driver.
This release supports xserver versions 1.13-1.20.

There are no big changes in this release, just fixes and other minor
improvements.

Thanks to everybody who contributed to this release in any way!

NOTE:

As of September, I'm no longer working for AMD but for Red Hat's
graphics infrastructure team. I'm hoping that someone from my former
team at AMD will step up to maintain this driver.

Flora Cui (1):
      dri2: reply to client for WaitMSC request in any case

Michel Dänzer (13):
      Retry get_fb_ptr in get_fb
      dri3: Always flush glamor before sharing pixmap storage with clients
      dri2: Re-use previous CRTC when possible if pick_best_crtc returns NULL
      Remove dri2_drawable_crtc parameter consider_disabled
      present: Check that we can get a KMS FB for flipping
      Don't disable page flipping completely with SW cursor
      gitlab-ci: Use templates from wayland/ci-templates
      present: Also check pixmap pitch in check_flip with current xserver
      present: Don't check pixmap pitch in check_flip with current DC
      present: Don't check pixmap pitch in check_flip with non-DC >= 3.34
      Don't set up black scanout buffer if LeaveVT is called from CloseScreen
      Don't unreference FBs of pixmaps from different screens in LeaveVT
      Bump version for the 19.1.0 release

Log message:
xf86-video-amdgpu: update to 19.0.1.

This is a minor follow-up release with only one change:

* Add support for RandR output tile properties, allowing monitors using
  DisplayPort Multi Stream Transport tiling to work better out of the
  box.

Thanks to everybody who contributed to this release in any way!

Dave Airlie (1):
      modesetting: add tile property support

Michel Dänzer (1):
      Bump version for the 19.0.1 release

Log message:
xf86-video-amdgpu: update to 19.0.0.

I'm pleased to announce the 19.0.0 release of xf86-video-amdgpu, the
Xorg driver for AMD Radeon GPUs supported by the amdgpu kernel driver.
This release supports xserver versions 1.13-1.20.

Highlights:

* Support for FreeSync variable refresh rate (this also requires the
  amdgpu driver from kernel 5.0 or newer, and radeonsi from Mesa 19.0 or
  newer).
* Various TearFree related fixes and robustness improvements.
* Support for scanout buffers using DCC colour compression.
* Up to six independent instances per GPU are now supported in "Zaphod"
  style multi-head configurations.

Plus other improvements and fixes. Thanks to everybody who contributed
to this release in any way!

Mario Kleiner (1):
      Fix crash when page flipping in multi-X-Screen/Zaphod mode

Michel Dänzer (53):
      Post-release version bump
      Convert README to markdown
      Handle pending scanout update in drmmode_crtc_scanout_free
      Make wait_pending_flip / handle_deferred symmetric in set_mode_major
      Cast return value of amdgpu_get_marketing_name to char*
      Fix --disable-glamor build
      Add GitLab CI configuration
      Fix condition for calling set_pixmap_bo in drmmode_xf86crtc_resize
      Allow up to six instances in Zaphod mode
      Detect and fix up non-premultiplied cursor data
      glamor: Can work at depth >= 15 with current xserver Git master
      man: This driver supports colour depths 8, 15 and 16
      Add README.md to EXTRA_DIST
      Relax detection of non-premultiplied alpha cursor data
      Use drm_abort_one in drm_queue_handler
      Explicitly keep track of whether a DRM event is for a flip or not
      Move deferred vblank events to separate drm_vblank_deferred list
      Skip gamma correction of cursor data if premultiplied R/G/B > alpha
      Generate docker image as part of CI pipeline
      Perform scanout buffer update immediately if drmmode_wait_vblank fails
      Cancel pending scanout update in drmmode_crtc_scanout_update
      Automatically try re-enabling TearFree after a flip failed
      Don't use GBM for allocating HW cursor BOs
      Drop AMDGPUInfoRec::cursor_buffer array
      Use drmIoctl in drmmode_show_cursor
      Update cursor position in drmmode_show_cursor if hotspot changed
      Use two HW cursor buffers per CRTC
      Don't clear info->flip_window in present_unflip
      Remove superfluous vrr_flipping field and clean up related code
      gitlab-ci: Use kaniko instead of docker-in-docker for image generation
      Only call drmmode_uevent_init if RandR is enabled
      Only call drmmode_validate_leases if RandR is enabled
      dri3: Flush if necessary in dri3_fd_from_pixmap
      dri2: Flush in dri2_create_buffer2 after calling glamor_set_pixmap_bo
      glamor: Avoid glamor_create_pixmap for pixmaps backing windows
      Don't allow TearFree scanout flips to complete in the same vblank period
      Only update drmmode_crtc->flip_pending after actually submitting a flip
      Call drmHandleEvent again if it was interrupted by a signal
      Keep waiting for a pending flip if drm_handle_event returns 0
      gitlab-ci: Only run docker-image stage if relevant source files change
      gitlab-ci: Don't rely on $CI_PROJECT_NAME
      Don't register a window private if VRR is disabled
      Don't enable the VRR support code for GPU screens
      Wrap change/delete window property request handlers
      Make use of property request wrappers for VRR property
      Call amdgpu_present_set_screen_vrr from amdgpu_vrr_property_update
      present: Check that flip and screen pixmap pitches match
      dri2: Call drm_queue_handle_deferred in dri2_deferred_event
      Revert "gitlab-ci: Only run docker-image stage if relevant source \ 
files change"
      Revert "Remove set but unused amdgpu_dri2::pKernelDRMVersion"
      Make drmmode_cm_enabled an inline function
      present: Don't check tiling parameters with DC & DRM minor version >= 31
      Bump version for the 19.0.0 release

Nicholas Kazlauskas (2):
      Check last flip window instead of screen root before flipping
      Support CRTC variable refresh for windows using Present flips

Log message:
xf86-video-amdgpu: update to 18.1.0

Add LICENSE.

Log message:
xf86-video-amdgpu: fix build with modular-xorg-server-1.20.

Log message:
xf86-video-amdgpu: update to 18.0.1.

I'm pleased to announce the 18.0.1 release of xf86-video-amdgpu, the
Xorg driver for AMD Radeon GPUs supported by the amdgpu kernel driver.
This release supports xserver versions 1.13-1.19. It also works with
xserver 1.20 RC1, so unless something unexpected happens, it should work
with xserver 1.20 as well.

This is a bug-fix release addressing issues in 18.0.0. While those
issues shouldn't affect most users, I recommend that all users of 18.0.0
update to 18.0.1.

* The Xorg process could enter an infinite loop after a server reset (in
  configurations where Xorg doesn't terminate when the last client
  disconnects)
* The Xorg process could crash when multiple primary screens are
  configured in xorg.conf.
* TearFree could trigger debugging messages in the pixman library

Log message:
xf86-video-amdgpu: update to 18.0.0.

I'm pleased to announce the 18.0.0 release of xf86-video-amdgpu, the
Xorg driver for AMD Radeon GPUs supported by the amdgpu kernel driver.
This release supports xserver versions 1.13-1.19. It also works with
xserver 1.20 RC1, so unless something unexpected happens, it should work
with xserver 1.20 as well.

Highlights:

* New year-based versioning scheme
* Page flipping can now be used even when the HW cursor can't be used in
  some cases
* Support for 30-bit RGB colour output. Note that gamma correction is
  currently not available with 30-bit colour. Also, hardware
  acceleration is not available with 30-bit colour with xserver versions
  before 1.20.

Plus other improvements and fixes. Thanks to everybody who contributed
to this release in any way!