Log message:
Update gmake to 4.2:

Version 4.2 (22 May 2016)

A complete list of bugs fixed in this version is available here:

http://sv.gnu.org/bugs/index.php?group=make&report_id=111&fix_release_id=106&set=custom

* New variable: $(.SHELLSTATUS) is set to the exit status of the last != or
  $(shell ...) function invoked in this instance of make.  This will be \ 
"0" if
  successful or not "0" if not successful.  The variable value is \ 
unset if no
  != or $(shell ...) function has been invoked.

* The $(file ...) function can now read from a file with $(file <FILE).
  The function is expanded to the contents of the file.  The contents are
  expanded verbatim except that the final newline, if any, is stripped.

* The makefile line numbers shown by GNU make now point directly to the
  specific line in the recipe where the failure or warning occurred.
  Sample changes suggested by Brian Vandenberg <phantall@gmail.com>

* The interface to GNU make's "jobserver" is stable as documented in the
  manual, for tools which may want to access it.

  WARNING: Backward-incompatibility! The internal-only command line option
  --jobserver-fds has been renamed for publishing, to --jobserver-auth.

* The amount of parallelism can be determined by querying MAKEFLAGS, even when
  the job server is enabled (previously MAKEFLAGS would always contain only
  "-j", with no number, when job server was enabled).

* VMS-specific changes:

  * Perl test harness now works.

  * Full support for converting Unix exit status codes to VMS exit status
    codes.  BACKWARD INCOMPATIBILITY Notice: On a child failure the VMS exit
    code is now the encoded Unix exit status that Make usually generates, not
    the VMS exit status of the child.

Log message:
Use OPSYSVARS.

Log message:
Remove nls option for NetBSD
Fix PREFER_PKGSRC=yes circular dependency from gettext under NetBSD.

Log message:
Add SHA512 digests for distfiles for devel category

Issues found with existing distfiles:
	distfiles/eclipse-sourceBuild-srcIncluded-3.0.1.zip
	distfiles/fortran-utils-1.1.tar.gz
	distfiles/ivykis-0.39.tar.gz
	distfiles/enum-1.11.tar.gz
	distfiles/pvs-3.2-libraries.tgz
	distfiles/pvs-3.2-linux.tgz
	distfiles/pvs-3.2-solaris.tgz
	distfiles/pvs-3.2-system.tgz
No changes made to these distinfo files.

Otherwise, existing SHA1 digests verified and found to be the same on
the machine holding the existing distfiles (morden).  All existing
SHA1 digests retained for now as an audit trail.

Log message:
Appy upstream git commit 292da6f6867b75a5af7ddbb639a1feae022f438f
to resolve upstrem bug#43434, make 4.1 without /dev/pts mounted segfaults.

Bump PKGREVISION.

Log message:
Update to 4.1:

Version 4.1 (05 Oct 2014)

A complete list of bugs fixed in this version is available here:

http://sv.gnu.org/bugs/index.php?group=make&report_id=111&fix_release_id=105&set=custom

* New variables: $(MAKE_TERMOUT) and $(MAKE_TERMERR) are set to non-empty
  values if stdout or stderr, respectively, are believed to be writing to a
  terminal.  These variables are exported by default.

* Allow a no-text-argument form of the $(file ...) function.  Without a text
  argument nothing is written to the file: it is simply opened in the
  requested mode, then closed again.

* Change the fatal error for mixed explicit and implicit rules, that was
  introduced in GNU make 3.82, to a non-fatal error.  However, this syntax is
  still deprecated and may return to being illegal in a future version of GNU
  make.  Makefiles that rely on this syntax should be fixed.
  See https://savannah.gnu.org/bugs/?33034

Log message:
Remove pkgviews: don't set PKG_INSTALLATION_TYPES in Makefiles.

Log message:
snprintf is required. Fix build under SCO OpenServer 5.0.7/3.2.

Log message:
Update to 4.0:

Version 4.0 (09 Oct 2013)

A complete list of bugs fixed in this version is available here:

http://sv.gnu.org/bugs/index.php?group=make&report_id=111&fix_release_id=101&set=custom

* WARNING: Backward-incompatibility!
  If .POSIX is specified, then make adheres to the POSIX backslash/newline
  handling requirements, which introduces the following changes to the
  standard backslash/newline handling in non-recipe lines:
  * Any trailing space before the backslash is preserved
  * Each backslash/newline (plus subsequent whitespace) is converted to a
    single space

* New feature: GNU Guile integration
  This version of GNU make can be compiled with GNU Guile integration.
  GNU Guile serves as an embedded extension language for make.
  See the "Guile Function" section in the GNU Make manual for details.
  Currently GNU Guile 1.8 and 2.0+ are supported.  In Guile 1.8 there is no
  support for internationalized character sets.  In Guile 2.0+, scripts can be
  encoded in UTF-8.

* New command line option: --output-sync (-O) enables grouping of output by
  target or by recursive make.  This is useful during parallel builds to avoid
  mixing output from different jobs together giving hard-to-understand
  results.  Original implementation by David Boyce <dsb@boyski.com>.
  Reworked and enhanced by Frank Heckenbach <f.heckenbach@fh-soft.de>.
  Windows support by Eli Zaretskii <eliz@gnu.org>.

* New command line option: --trace enables tracing of targets.  When enabled
  the recipe to be invoked is printed even if it would otherwise be suppressed
  by .SILENT or a "@" prefix character.  Also before each recipe is run the
  makefile name and linenumber where it was defined are shown as well as the
  prerequisites that caused the target to be considered out of date.

* New command line option argument: --debug now accepts a "n" (none) flag
  which disables all debugging settings that are currently enabled.

* New feature: The "job server" capability is now supported on Windows.
  Implementation contributed by Troy Runkel <Troy.Runkel@mathworks.com>

* New feature: The .ONESHELL capability is now supported on Windows.  Support
  added by Eli Zaretskii <eliz@gnu.org>.

* New feature: "!=" shell assignment operator as an alternative to the
  $(shell ...) function.  Implemented for compatibility with BSD makefiles.
  Note there are subtle differences between "!=" and $(shell ...).  See the
  description in the GNU make manual.
  WARNING: Backward-incompatibility!
  Variables ending in "!" previously defined as "variable!= \ 
value" will now be
  interpreted as shell assignment.  Change your assignment to add whitespace
  between the "!" and "=": "variable! = value"

* New feature: "::=" simple assignment operator as defined by POSIX in \ 
2012.
  This operator has identical functionality to ":=" in GNU make, but \ 
will be
  portable to any implementation of make conforming to a sufficiently new
  version of POSIX (see http://austingroupbugs.net/view.php?id=330).  It is
  not necessary to define the .POSIX target to access this operator.

* New feature: Loadable objects
  This version of GNU make contains a "technology preview": the ability to
  load dynamic objects into the make runtime.  These objects can be created by
  the user and can add extended functionality, usable by makefiles.

* New function: $(file ...) writes to a file.

* New variable: $(GNUMAKEFLAGS) will be parsed for make flags, just like
  MAKEFLAGS is.  It can be set in the environment or the makefile, containing
  GNU make-specific flags to allow your makefile to be portable to other
  versions of make.  Once this variable is parsed, GNU make will set it to the
  empty string so that flags will not be duplicated on recursion.

* New variable: `MAKE_HOST' gives the name of the host architecture
  make was compiled for.  This is the same value you see after 'Built for'
  when running 'make --version'.

* Behavior of MAKEFLAGS and MFLAGS is more rigorously defined.  All simple
  flags are grouped together in the first word of MAKEFLAGS.  No options that
  accept arguments appear in the first word.  If no simple flags are present
  MAKEFLAGS begins with a space.  Flags with both short and long versions
  always use the short versions in MAKEFLAGS.  Flags are listed in
  alphabetical order using ASCII ordering.  MFLAGS never begins with "- ".

* Setting the -r and -R options in MAKEFLAGS inside a makefile now works as
  expected, removing all built-in rules and variables, respectively.

* If a recipe fails, the makefile name and linenumber of the recipe are shown.

* A .RECIPEPREFIX setting is remembered per-recipe and variables expanded
  in that recipe also use that recipe prefix setting.

* In -p output, .RECIPEPREFIX settings are shown and all target-specific
  variables are output as if in a makefile, instead of as comments.

* On MS-Windows, recipes that use ".." quoting will no longer force
  invocation of commands via temporary batch files and stock Windows
  shells, they will be short-circuited and invoked directly.  (In
  other words, " is no longer a special character for stock Windows
  shells.)  This avoids hitting shell limits for command length when
  quotes are used, but nothing else in the command requires the shell.
  This change could potentially mean some minor incompatibilities in
  behavior when the recipe uses quoted string on shell command lines.

Log message:
Bump all packages for perl-5.18, that
a) refer 'perl' in their Makefile, or
b) have a directory name of p5-*, or
c) have any dependency on any p5-* package

Like last time, where this caused no complaints.