Log message:
Bump all packages that use perl, or depend on a p5-* package, or
are called p5-*.

I hope that's all of them.

Log message:
Updating package for Perl5 code beautifier Perl::Tidy in devel/p5-Perl-Tidy
from 20120701 to 20120714.

Upstream changes:
  2012 07 14
     - Added flag -iscl (--ignore-side-comment-lengths) which causes perltidy
       to ignore the length of side comments when setting line breaks,
       RT #71848.  The default is to include the length of side comments when
       breaking lines to stay within the length prescribed by the -l=n
       maximum line length parameter.  For example,

         Default behavior on a single line with long side comment:
            $vmsfile =~ s/;[\d\-]*$//
              ;    # Clip off version number; we can use a newer version as well

         perltidy -iscl leaves the line intact:

            $vmsfile =~ s/;[\d\-]*$//; # Clip off version number; we can use a \ 
newer version as well

     - Fixed RT #78182, side effects with STDERR.  Error handling has been
       revised and the documentation has been updated.  STDERR can now be
       redirected to a string reference, and perltidy now returns an
       error flag instead of calling die when input errors are detected.
       If the error flag is set then no tidied output was produced.
       See man Perl::Tidy for an example.

     - Fixed RT #78156, erroneous warning message for package VERSION syntax.

     - Added abbreviations -conv (--converge) to simplify iteration control.
       -conv is equivalent to -it=4 and will insure that the tidied code is
       converged to its final state with the minimum number of iterations.

     - Minor formatting modifications have been made to insure convergence.

     - Simplified and hopefully improved the method for guessing the starting
       indentation level of entabbed code.  Added flag -dt=n (--default_tabsize=n)
       which might be helpful if the guessing method does not work well for
       some editors.

     - Added support for stacked labels, upper case X/B in hex and binary, and
       CORE:: namespace.

     - Eliminated warning messages for using keyword names as constants.

Log message:
Updating package for Perl 5 module Perl::Tidy (including neat util perltidy)
in devel/p5-Perl-Tidy from 20101217 to 20120701.

Upstream changes:
2012 07 01
     - Corrected problem introduced by using a chomp on scalar references, RT #77978

     - Added support for Perl 5.14 package block syntax, RT #78114.

     - A convergence test is made if three or more iterations are requested with
       the -it=n parameter to avoid wasting computer time.  Several hundred Mb of
       code gleaned from the internet were searched with the results that:
        - It is unusual for two iterations to be required unless a major
          style change is being made.
        - Only one case has been found where three iterations were required.
        - No cases requiring four iterations have been found with this version.
       For the previous version several cases where found the results could
       oscillate between two semi-stable states. This version corrects this.

       So if it is important that the code be converged it is okay to set -it=4
       with this version and it will probably stop after the second iteration.

     - Improved ability to identify and retain good line break points in the
       input stream, such as at commas and equals. You can always tell
       perltidy to ignore old breakpoints with -iob.

     - Fixed glitch in which a terminal closing hash brace followed by semicolon
       was not outdented back to the leading line depth like other closing
       tokens.  Thanks to Keith Neargarder for noting this.

         OLD:
            my ( $pre, $post ) = @{
                {
                    "pp_anonlist" => [ "[", "]" ],
                    "pp_anonhash" => [ "{", "}" ]
                }->{ $kid->ppaddr }
              };   # terminal brace

         NEW:
            my ( $pre, $post ) = @{
                {
                    "pp_anonlist" => [ "[", "]" ],
                    "pp_anonhash" => [ "{", "}" ]
                }->{ $kid->ppaddr }
            };    # terminal brace

     - Removed extra indentation given to trailing 'if' and 'unless' clauses
       without parentheses because this occasionally produced undesirable
       results.  This only applies where parens are not used after the if or
       unless.

        OLD:
            return undef
              unless my ( $who, $actions ) =
                  $clause =~ /^($who_re)((?:$action_re)+)$/o;

        NEW:
            return undef
              unless my ( $who, $actions ) =
              $clause =~ /^($who_re)((?:$action_re)+)$/o;

Log message:
Update to 20101217:

  2010 12 17
     - added new flag -it=n or --iterations=n
       This flag causes perltidy to do n complete iterations.
       For most purposes the default of n=1 should be satisfactory.  However n=2
       can be useful when a major style change is being made, or when code is being
       beautified on check-in to a source code control system.  The run time will be
       approximately proportional to n, and it should seldom be necessary to use a
       value greater than n=2.  Thanks to Jonathan Swartz

     - A configuration file pathname begins with three dots, e.g.
       ".../.perltidyrc", indicates that the file should be searched \ 
for starting
       in the current directory and working upwards. This makes it easier to have
       multiple projects each with their own .perltidyrc in their root directories.
       Thanks to Jonathan Swartz for this patch.

     - Added flag --notidy which disables all formatting and causes the input to be
       copied unchanged.  This can be useful in conjunction with hierarchical
       F<.perltidyrc> files to prevent unwanted tidying.
       Thanks to Jonathan Swartz for this patch.

     - Added prefilters and postfilters in the call to the Tidy.pm module.
       Prefilters and postfilters. The prefilter is a code reference that
       will be applied to the source before tidying, and the postfilter
       is a code reference to the result before outputting.

       Thanks to Jonathan Swartz for this patch.  He writes:
       This is useful for all manner of customizations. For example, I use
       it to convert the 'method' keyword to 'sub' so that perltidy will work for
       Method::Signature::Simple code:

       Perl::Tidy::perltidy(
          prefilter => sub { $_ = $_[0]; s/^method (.*)/sub $1 \#__METHOD/gm; \ 
return $_ },
          postfilter => sub { $_ = $_[0]; s/^sub (.*?)\s* \#__METHOD/method \ 
$1/gm; return $_ }
       );

     - The starting indentation level of sections of code entabbed with -et=n
       is correctly guessed if it was also produced with the same -et=n flag.  This
       keeps the indentation stable on repeated formatting passes within an editor.
       Thanks to Sam Kington and Glenn.

     - Functions with prototype '&' had a space between the function and opening
       peren.  This space now only occurs if the flag --space-function-paren (-sfp)
       is set.  Thanks to Zrajm Akfohg.

     - Patch to never put spaces around a bare word in braces beginning with ^ as in:
         my $before = ${^PREMATCH};
       even if requested with the -bt=0 flag because any spaces cause a syntax \ 
error in perl.
       Thanks to Fabrice Dulanoy.

Log message:
Revision bump after updating perl5 to 5.14.1.

Log message:
Bump the PKGREVISION for all packages which depend directly on perl,
to trigger/signal a rebuild for the transition 5.10.1 -> 5.12.1.

The list of packages is computed by finding all packages which end
up having either of PERL5_USE_PACKLIST, BUILDLINK_API_DEPENDS.perl,
or PERL5_PACKLIST defined in their make setup (tested via
"make show-vars VARNAMES=..."), minus the packages updated after
the perl package update.

sno@ was right after all, obache@ kindly asked and he@ led the
way. Thanks!

Log message:
pkgsrc changes:
  - Updating Perl-Tidy from 20071205 to 20090616
  - Setting license to gnu-gpl-v2

Upstream changes:
  2009 06 16
     - Allow configuration file to be 'perltidy.ini' for Windows systems.
       i.e. C:\Documents and Settings\User\perltidy.ini
       and added documentation for setting configuation file under Windows in man
       page.  Thanks to Stuart Clark.

     - Corrected problem of unwanted semicolons in hash ref within given/when code.
      Thanks to Nelo Onyiah.

     - added new flag -cscb or --closing-side-comments-balanced
      When using closing-side-comments, and the closing-side-comment-maximum-text
      limit is exceeded, then the comment text must be truncated.  Previous
      versions of perltidy terminate with three dots, and this can still be
      achieved with -ncscb:

   perltidy -csc -ncscb

       } ## end foreach my $foo (sort { $b cmp $a ...

  However this causes a problem with older editors which cannot recognize
      comments or are not configured to doso because they cannot \ 
"bounce" around in
      the text correctly.  The B<-cscb> flag tries to help them by
      appending appropriate terminal balancing structure:

   perltidy -csc -cscb

       } ## end foreach my $foo (sort { $b cmp $a ... })

  Since there is much to be gained and little to be lost by doing this,
      the default is B<-cscb>.  Use B<-ncscb> if you do not want this.

      Thanks to Daniel Becker for suggesting this option.

     - After an isolated closing eval block the continuation indentation will be
       removed so that the braces line up more like other blocks.  Thanks to \ 
Yves Orton.

     OLD:
        eval {
            #STUFF;
            1;    # return true
          }
          or do {
            #handle error
          };

     NEW:
        eval {
            #STUFF;
            1;    # return true
        } or do {
            #handle error
        };

     -A new flag -asbl (or --opening-anonymous-sub-brace-on-new-line) has
      been added to put the opening brace of anonymous sub's on a new line,
      as in the following snippet:

        my $code = sub
        {
            my $arg = shift;
            return $arg->(@_);
        };

      This was not possible before because the -sbl flag only applies to named
      subs. Thanks to Benjamin Krupp.

     -Fix tokenization bug with the following snippet
       print 'hi' if { x => 1, }->{x};
      which resulted in a semicolon being added after the comma.  The workaround
      was to use -nasc, but this is no longer necessary.  Thanks to Brian Duggan.

     -Fixed problem in which an incorrect error message could be triggered
     by the (unusual) combination of parameters  -lp -i=0 -l=2 -ci=0 for
     example.  Thanks to Richard Jelinek.

     -A new flag --keep-old-blank-lines=n has been added to
     give more control over the treatment of old blank lines in
     a script.  The manual has been revised to discuss the new
     flag and clarify the treatment of old blank lines.  Thanks
     to Oliver Schaefer.

Log message:
Update from version 20070508nb1 to 20071205.

Fixes PR#39557.

Pkgsrc changes:
 o Add a commented-out HOMEPAGE using search.cpan.org

Upstream changes:

  2007 12 05
     -Improved support for perl 5.10: New quote modifier 'p', new
     block type UNITCHECK, new keyword break, improved formatting
     kof given/when.

     -Corrected tokenization bug of something like $var{-q}.

     -Numerous minor formatting improvements.

     -Corrected list of operators controlled by -baao -bbao to include
       . : ? && || and or err xor

     -Corrected very minor error in log file involving incorrect comment
     regarding need for upper case of labels.

     -Fixed problem where perltidy could run for a very long time
     when given certain non-perl text files.

     -Line breaks in un-parenthesized lists now try to follow
     line breaks in the input file rather than trying to fill
     lines.  This usually works better, but if this causes
     trouble you can use -iob to ignore any old line breaks.
     Example for the following input snippet:

        print
        "conformability (Not the same dimension)\n",
        "\t", $have, " is ", text_unit($hu), "\n",
        "\t", $want, " is ", text_unit($wu), "\n",
        ;

      OLD:
        print "conformability (Not the same dimension)\n", \ 
"\t", $have, " is ",
          text_unit($hu), "\n", "\t", $want, " is \ 
", text_unit($wu), "\n",;

      NEW:
        print "conformability (Not the same dimension)\n",
          "\t", $have, " is ", text_unit($hu), "\n",
          "\t", $want, " is ", text_unit($wu), "\n",
          ;

  2007 08 01
     -Added -fpsc option (--fixed-position-side-comment). Thanks
     to Ueli Hugenschmidt.  For example -fpsc=40 tells perltidy to
     put side comments in column 40 if possible.

     -Added -bbao and -baao options (--break-before-all-operators
     and --break-after-all-operators) to simplify command lines
     and configuration files.  These define an initial preference
     for breaking at operators which can be modified with -wba and
     -wbb flags.  For example to break before all operators except
     an = one could use --bbao -wba='=' rather than listing every
     single perl operator (except =) on a -wbb flag.

     -Added -kis option (--keep-interior-semicolons).  Use the B<-kis> flag
     to prevent breaking at a semicolon if there was no break there in the
     input file.  To illustrate, consider the following input lines:

        dbmclose(%verb_delim); undef %verb_delim;
        dbmclose(%expanded); undef %expanded;
        dbmclose(%global); undef %global;

     Normally these would be broken into six lines, but
     perltidy -kis gives:

        dbmclose(%verb_delim); undef %verb_delim;
        dbmclose(%expanded);   undef %expanded;
        dbmclose(%global);     undef %global;

     -Improved formatting of complex ternary statements, with indentation
     of nested statements.
      OLD:
        return defined( $cw->{Selected} )
          ? (wantarray)
          ? @{ $cw->{Selected} }
          : $cw->{Selected}[0]
          : undef;

      NEW:
        return defined( $cw->{Selected} )
          ? (wantarray)
              ? @{ $cw->{Selected} }
              : $cw->{Selected}[0]
          : undef;

     -Text following un-parenthesized if/unless/while/until statements get a
     full level of indentation.  Suggested by Jeff Armstorng and others.
     OLD:
        return $ship->chargeWeapons("phaser-canon")
          if $encounter->description eq 'klingon'
          and $ship->firepower >= $encounter->firepower
          and $location->status ne 'neutral';
     NEW:
        return $ship->chargeWeapons("phaser-canon")
          if $encounter->description eq 'klingon'
              and $ship->firepower >= $encounter->firepower
              and $location->status ne 'neutral';

Log message:
Bump the PKGREVISION for all packages which depend directly on perl,
to trigger/signal a rebuild for the transition 5.8.8 -> 5.10.0.

The list of packages is computed by finding all packages which end
up having either of PERL5_USE_PACKLIST, BUILDLINK_API_DEPENDS.perl,
or PERL5_PACKLIST defined in their make setup (tested via
"make show-vars VARNAMES=...").

Log message:
Add DESTDIR support.