Log message:
Updated xf86-video-ati to 7.10.0.

I'm pleased to announce the 7.10.0 release of xf86-video-ati, the Xorg
driver for ATI/AMD Radeon GPUs supported by the radeon kernel driver.
This release supports xserver versions 1.13-1.19.

Highlights:

* Clients can now use DRI page flipping even while TearFree is enabled
  for any CRTC. This should improve performance of such clients
  (including compositing managers) while TearFree is enabled, and avoid
  other issues such as tearing on other CRTCs where TearFree isn't
  enabled.
* The driver now takes measures to prevent other DRM master processes
  (potentially from other local users) from accessing buffers created by
  this driver while switched away to a different VT. Other DRM master
  processes should only be able to access a single buffer anymore, which
  contains only all-black pixels.
* The gamma ramp is now applied to the HW cursor as well, so the HW
  cursor doesn't look odd when e.g. using Redshift or similar tools.

Plus other improvements and fixes. Thanks to everybody who
contributed to this release in any way!

Adam Jackson (1):
      modesetting: Validate the atom for enum properties

Daniel Stone (1):
      Set correct DRM event context version

Eric Anholt (1):
      Use plain glamor_egl_create_textured_screen().

Martin Peres (1):
      modesetting: re-set the crtc's mode when link-status goes BAD

Michel Dänzer (46):
      Post-release version bump
      manpage: Don't put "'" at the beginning of a line
      Don't set modes before RADEONWindowExposures_oneshot is called
      Apply gamma correction to HW cursor
      Pass pixmap instead of handle to radeon_do_pageflip
      Use reference counting for tracking KMS framebuffer lifetimes
      Simplify tracking of PRIME scanout pixmap
      Remove unused struct members from drmmode_display.h
      Update URLs
      Include xf86Pci.h for DRICreatePCIBusID with xserver Git master
      Only call drmmode_scanout_free for non-GPU screens in LeaveVT
      Increase reference count of FB assigned to drmmode_crtc->flip_pending
      Improve drmmode_fb_reference debugging code
      Use pRADEONEnt->fd exclusively for the DRM file descriptor
      Use drmmode_crtc->scanout_id instead of 0 to check for scanout buffer
      If a TearFree flip fails, fall back to non-TearFree operation
      Only handle reflection in the driver with Xorg < 1.16
      Add AC_CONFIG_MACRO_DIRS([m4]) to configure.ac
      Makefile.am: Set ACLOCAL_AMFLAGS = -I m4
      autogen.sh: Pass -f to autoreconf
      Use root window (pixmap) instead of screen pixmap for scanout updates
      Add drmmode_crtc_can_flip helper
      Allow DRI page flipping when some CRTCs use separate scanout buffers
      Adapt to PixmapDirtyUpdateRec::src being a DrawablePtr
      Remove drmmode_crtc->scanout_destroy[] array
      Pass reference CRTC to radeon_do_pageflip directly
      Create drmmode_wait_vblank helper
      Create drmmode_crtc_wait_pending_event helper macro
      Wait for pending flips synchronously before turning off a CRTC
      Handle multiple "pending" Present flips
      Add source drawable parameter to radeon_scanout_do_update
      Pass extents to radeon_scanout_do_update
      Always allow Present page flipping with TearFree
      Always allow DRI2 page flipping with TearFree
      Consolidate radeon_scanout_flip_abort/handler helpers
      Use xorg_list_append for the DRM event list
      Make radeon_scanout_do_update take a PixmapPtr instead of a DrawablePtr
      Create radeon_pixmap_clear helper
      Create drmmode_set_mode helper
      Create radeon_pixmap_get_fb_ptr helper
      Create radeon_master_screen helper
      Make all active CRTCs scan out an all-black framebuffer in LeaveVT
      Remove drmmode_scanout_free
      Use a timer for unreferencing the all-black FB
      Require xserver >= 1.13
      Bump version for 7.10.0 release

Log message:
Updated xf86-video-ati to 7.9.0.

I'm pleased to announce the 7.9.0 release of xf86-video-ati, the Xorg
driver for ATI/AMD Radeon GPUs supported by the radeon kernel driver.
This release supports xserver versions 1.10-1.19.

Highlights:

* Allow TearFree to be toggled at runtime via an RandR output property
  "TearFree". The xorg.conf option "TearFree" now controls \ 
the default
  value of the output properties.
* Use glamor by default for 2D acceleration with >= R600 and Xorg >=
  1.18.3.
* Ship 10-radeon.conf xorg.conf.d snippet for Xorg >= 1.16, so that the
  radeon driver can be loaded automatically even when the ati wrapper
  driver isn't installed.
* Support loading the amdgpu driver from the ati wrapper driver.
* Use DRM render nodes for DRI3 clients when available.

Plus many other improvements and fixes. Thanks to everybody who
contributed to this release in any way!

Emil Velikov (1):
      autogen.sh: use quoted string variables

Jammy Zhou (1):
      Use render node for DRI3 if available

Jochen Rollwagen (3):
      fix build for xserver < 1.13
      Calculate log base 2 in radeon.h based on clz for all platforms
      Fix build for XServer 1.13

Michel Dänzer (38):
      Post-release version bump
      Use DRM_MODE_PAGE_FLIP_TARGET_ABSOLUTE/RELATIVE flags when available
      Enable glamor by default with >= R600 and Xorg >= 1.18.3
      Don't install Flush/EventCallback for GPU screens
      Pass fb_id into drmmode_page_flip_target_absolute/relative
      Add radeon_is_gpu_screen helper
      Take current scanout_id into account everywhere involved with TearFree
      Fix radeon_scanout_extents_intersect for GPU screens
      Call ValidateGC after ChangeClip in radeon_sync_scanout_pixmaps
      Call radeon_drm_abort_entry on failure to flip to a scanout pixmap
      Simplify drmmode_handle_uevents
      Pass pitch from drmmode_crtc_scanout_allocate to drmmode_create_bo_pixmap
      .editorconfig: src/ati.c only uses spaces for indentation
      ati: Support loading the amdgpu driver from the ati wrapper
      Add 10-radeon.conf xorg.conf.d snippet
      Enable tiling by default with glamor on PALM
      Don't handle Option "SwapbuffersWait" at all with glamor
      Fix flip event data leak if calloc or drmModeAddFB fails
      Don't destroy current FB if drmModeAddFB fails
      Factor out radeon_prime_dirty_to_crtc helper
      Factor out drmmode_crtc_scanout_update helper
      Allow toggling TearFree at runtime via output property
      Use drmmode_crtc_scanout_free in drmmode_fini
      present: Only call drmModeRmFB after setting modes for unflip
      present: Wait for screen pixmap BO idle before setting modes for unflip
      Call drmmode_crtc_scanout_create in drmmode_crtc_shadow_allocate as well
      Fold drmmode_crtc_scanout_allocate into drmmode_crtc_scanout_create
      Handle rotation in the driver also with Xorg 1.12-1.18
      present: Also flush before using a flip to unflip
      present: Use async flip for unflip if possible
      present: Flush before flipping
      Fix bogus indentation
      Call drmmode_set_desired_modes from a WindowExposures hook
      Move DPMS check from radeon_scanout_do_update to radeon_scanout_flip
      Don't call radeon_cs_flush_indirect & radeon_bo_wait in drmmode_copy_fb
      Skip some initialization steps for GPU screens
      Pass TRUE to drmmode_set_desired_modes the first time for GPU screens
      Bump version for 7.9.0 release

Mihail Konev (1):
      autogen: add default patch prefix

Peter Hutterer (1):
      autogen.sh: use exec instead of waiting for configure to finish

jimqu (1):
      udev_monitor_receive_device() will block when hotplug monitor

Log message:
Updated xf86-video-ati to 7.8.0nb1:

Add patch from PR 50067 by David Shao, which comes from FreeBSD
ports/Dragonfly overlay, to improve the situation on FreeBSD and
Dragonfly.

Log message:
Updated xf86-video-ati to 7.8.0.

I'm pleased to announce the 7.8.0 release of xf86-video-ati, the Xorg
driver for ATI/AMD Radeon GPUs supported by the radeon kernel driver.
This release supports xserver versions 1.10-1.19.

Highlights:

* Significant 2D compositing performance increase, in particular with
  glamor enabled.
* Option "TearFree" can now prevent tearing in all possible display
  configurations (with current versions of Xorg). Specifically, it's
  now also effective with arbitrary RandR transforms and with RandR 1.4
  slave output.
* DRI3 is now enabled by default if the Xorg version is >= 1.18.3 and
  glamor is enabled.
* DRI3/Present asynchronous page flips are now supported (requires
  corresponding kernel driver support, available in current versions of
  the Linux kernel). This can increase performance of fullscreen
  applications with sync-to-vblank disabled.
* The HW cursor can now be used with RandR 1.4 slave output or with
  TearFree & rotation.
* Performance improvements with RandR 1.4 slave output.
* The list of supported GPUs in the Xorg log file has been slightly
  tidied up.
* RandR 1.4 provider capabilities are now advertised more accurately.

Plus many other improvements and fixes. Thanks to everybody who
contributed to this release in any way!

Adam Jackson (1):
      Adapt Block/WakeupHandler signature for ABI 23

Hans de Goede (3):
      Remove unnecessary fb addition from drmmode_xf86crtc_resize
      Only add main fb if necessary
      PRIME: Fix swapping of provider sink / source capabilities

Keith Packard (1):
      Adapt to video API 22

Michel Dänzer (65):
      Post 7.7.0 release version bump
      Add support for async flips to radeon_do_pageflip
      present: Support async flips
      Handle Zaphod mode correctly in radeon_mode_hotplug
      Enable DRI3 by default when building for Xorg >= 1.18.3
      Explicitly set the fbcon pixmap pitch again
      Add .editorconfig file
      Adapt to XF86_CRTC_VERSION 7
      Only use RandR APIs if RandR is enabled
      Add explicit RADEON_DRM_QUEUE_ERROR define
      Don't enable micro-tiling for scanout buffers on pre-R600
      Don't enable DRI3 by default with EXA
      Use EventCallback to avoid flushing every time in the FlushCallback
      Wait for pending flips to complete before turning off an output or CRTC
      Keep track of damage event related flushes per-client v2
      Use drmmode_crtc_scanout_* helpers for RandR 1.4 scanout pixmaps
      Handle RandR 1.4 slave dirty updates via radeon_drm_queue
      Track damage accurately for RandR 1.4 slave scanout
      Also call drmmode_clear_pending_flip from radeon_scanout_flip_abort
      Don't override crtc parameter value in drmmode_flip_handler/abort
      Also handle disabled CRTCs in drmmode_clear_pending_flip
      Fix build against xserver < 1.13
      Only copy from screen pixmap to shared pixmap on demand for slave scanout
      Factor out transform_region helper
      Move up radeon_scanout_extents_intersect
      Synchronize scanout pixmaps for TearFree
      Make TearFree effective with PRIME slave scanout
      glamor: Fix radeon_glamor_share_pixmap_backing for priv->bo == NULL
      Consolidate get_drawable_pixmap helper
      Move DRI2's local fixup_glamor helper to radeon_glamor_set_pixmap_bo
      glamor: Reallocate linear pixmap BO if necessary for DRI2 PRIME
      Destroy all dedicated scanout buffers during CloseScreen
      DRI2: Add interpolated_vblanks in radeon_dri2_get_crtc_msc
      Use local implementation of RegionDuplicate for older xserver
      Only define transform_region function for XF86_CRTC_VERSION >= 4
      Add support for ScreenPtr::SyncSharedPixmap
      Propagate failure from radeon_set_pixmap_bo
      glamor: Fix leak of pixmap private when replacing BO
      Free priv in amdgpu_set_pixmap_bo also if priv->bo == NULL
      Simplify drmmode_set_mode_major error handling
      Make sure drmmode_crtc->scanout[] are destroyed when not needed
      present: Don't allow flipping when using a dedicated scanout buffer
      dri2: Don't allow flipping when using a dedicated scanout buffer
      present: Separate checks for flips vs unflips
      Remove drmmode_load_palette
      Make the dedicated scanout mechanism work with arbitrary transforms
      Remove w/h parameters from radeon_scanout_extents_intersect
      Clear damage in radeon_scanout_update if it doesn't intersect the CRTC
      Only list each unique chipset family once in the log file
      Rotate and reflect cursor hotspot position for drmModeSetCursor2
      Restore location of radeon_set_pixmap_bo call in drmmode_create_bo_pixmap
      Enable HW cursor support with PRIME slave output & Xorg > 1.18.99.901
      Order unique chipsets according to first appearance in ati_pciids.csv
      Remove PCI IDs and bus type from ati_pciids.csv
      Sayōnara, AM_MAINTAINER_MODE!
      Don't rely on randr_crtc->scanout_pixmap in drmmode_set_scanout_pixmap
      Always call PixmapStopDirtyTracking in drmmode_set_scanout_pixmap
      Consume all available udev events at once
      Require xserver 1.10 or newer
      Check Xorg version at runtime instead of build time in two places
      Reindent code in radeon_dri2_create_buffer2
      Refactor radeon_mode_hotplug
      Use pRADEONEnt to find both screens of a GPU in radeon_mode_hotplug
      Update manpage entry for Option "TearFree"
      Bump version for 7.8.0 release

Qiang Yu (3):
      Remove RR_Capability_SinkOutput for GPU without CRTC
      Fix radeon_mode_hotplug crash on multi GPU platform.
      DRI2: Fix radeon_dri2_exchange_buffers width/height copy'n'paste error

Tan Hu (2):
      EXA/6xx/7xx: fast solid pixmap support
      EXA/6xx/7xx: accelerate PictOpOver with component alpha

Tom St Denis (1):
      dri3: Return NULL from radeon_dri3_pixmap_from_fd if calloc fails.

Log message:
Fix build with xorg-server-1.19.

Log message:
Updated xf86-video-ati to 7.7.1.

I'm pleased to announce the 7.7.1 release of xf86-video-ati, the Xorg
driver for ATI/AMD Radeon GPUs supported by the radeon kernel driver.
This release supports xserver versions 1.9-1.18.

This is a stable point release containing only fixes for
crash/hang/corruption bugs and other minor changes.

Thanks to Qiang Yu for his contributions to this release!

Michel Dänzer (15):
      Handle Zaphod mode correctly in radeon_mode_hotplug
      Explicitly set the fbcon pixmap pitch again
      Only use RandR APIs if RandR is enabled
      Don't enable micro-tiling for scanout buffers on pre-R600
      Wait for pending flips to complete before turning off an output or CRTC
      Also call drmmode_clear_pending_flip from radeon_scanout_flip_abort
      Don't override crtc parameter value in drmmode_flip_handler/abort
      Also handle disabled CRTCs in drmmode_clear_pending_flip
      glamor: Fix radeon_glamor_share_pixmap_backing for priv->bo == NULL
      Consolidate get_drawable_pixmap helper
      Move DRI2's local fixup_glamor helper to radeon_glamor_set_pixmap_bo
      glamor: Reallocate linear pixmap BO if necessary for DRI2 PRIME
      Destroy all dedicated scanout buffers during CloseScreen
      DRI2: Add interpolated_vblanks in radeon_dri2_get_crtc_msc
      Bump version for 7.7.1 release

Qiang Yu (3):
      Remove RR_Capability_SinkOutput for GPU without CRTC
      Fix radeon_mode_hotplug crash on multi GPU platform.
      DRI2: Fix radeon_dri2_exchange_buffers width/height copy'n'paste error

Log message:
Update xf86-video-ati to 7.7.0.

I'm pleased to announce the 7.7.0 release of xf86-video-ati, the Xorg
driver for ATI/AMD Radeon GPUs supported by the radeon kernel driver.
This release supports xserver versions 1.9-1.18.

Highlights:

* Option "TearFree" can now prevent tearing with rotation/reflection as
  well (with Xorg >= 1.16).
* RandR CRTC transforms now work correctly (but for now still exhibit
  tearing even with TearFree).
* The RandR 1.4 provider name is now no longer hardcoded to "radeon"
  but constructed from the GPU chipset name and bus ID, allowing
  several GPUs supported by this driver to be distinguished by name.
* The RandR primary output is now always explicitly marked as such.
* The driver can now make use of more than 256MB of VRAM for scanout
  buffers, allowing e.g. virtual desktop sizes >= 8192x8192 to work.
* The driver can prevent clients trying to use the DRI3 extension over a
  display connection forwarded via SSH from hanging.
* Many more fixes for issues using the DRI3/Present extensions.

Plus many other small improvements and fixes. Thanks to everybody who
contributed to this release in any way!

Log message:
Use OPSYSVARS.

Log message:
Remove two patches that are obsoleted by the newest modular-xorg-server,
and depend on it.

Bump PKGREVISION.

Log message:
Mention corresponding upstream commits (in xserver).