./print/foo2zjs, Printer driver for Zenographics ZjStream wire protocol

[ CVSweb ] [ Homepage ] [ RSS ] [ Required by ] [ Add to tracker ]

Branch: CURRENT, Version: 20120516nb1, Package name: foo2zjs-20120516nb1, Maintainer: imil

foo2zjs is an open source printer driver for printers that use the Zenographics
ZjStream wire protocol for their print data, such as the Minolta/QMS magicolor
2300 DL or Konica Minolta magicolor 2430 DL or HP LaserJet 1020 or HP LaserJet
Pro P1102 or HP LaserJet Pro P1102w or HP LaserJet Pro CP1025nw. These printers
are often erroneously referred to as winprinters or GDI printers. However,
Microsoft GDI only mandates the API between an application and the printer
driver, not the protocol on the wire between the printer driver and the printer.
In fact, ZjStream printers are raster printers which happen to use a very
efficient wire protocol which was developed by Zenographics and licensed by
most major printer manufacturers for at least some of their product lines.
ZjStream is just one of many wire protocols that are in use today, such as
Postscript, PCL, Epson, etc.


Required to run:
[textproc/gsed] [print/foomatic-filters-cups]

Required to build:
[pkgtools/cwrappers]

Master sites:

Filesize: 1605.588 KB

Version history: (Expand)

CVS history: (Expand)


   2021-10-26 13:15:15 by Nia Alarie | Files touched by this commit (1670) 
Log message:
print: Replace RMD160 checksums with BLAKE2s checksums

All checksums have been double-checked against existing RMD160 and
SHA512 hashes
   2021-10-07 16:52:04 by Nia Alarie | Files touched by this commit (1670) 
Log message:
print: Remove SHA1 hashes for distfiles
   2018-07-04 15:40:45 by Jonathan Perkin | Files touched by this commit (423) 
Log message:
*: Move SUBST_STAGE from post-patch to pre-configure

Performing substitutions during post-patch breaks tools such as mkpatches,
making it very difficult to regenerate correct patches after making changes,
and often leading to substituted string replacements being committed.
   2015-11-04 02:03:03 by Alistair G. Crooks | Files touched by this commit (1194) 
Log message:
Add SHA512 digests for distfiles for print category

Problems found locating distfiles:
	Package acroread7: missing distfile AdobeReader_enu-7.0.9-1.i386.tar.gz
	Package acroread8: missing distfile AdobeReader_enu-8.1.7-1.sparc.tar.gz
	Package cups-filters: missing distfile cups-filters-1.1.0.tar.xz
	Package dvidvi: missing distfile dvidvi-1.0.tar.gz
	Package lgrind: missing distfile lgrind.tar.bz2

Otherwise, existing SHA1 digests verified and found to be the same on
the machine holding the existing distfiles (morden).  All existing
SHA1 digests retained for now as an audit trail.
   2015-07-28 18:42:03 by Rumko | Files touched by this commit (5) 
Log message:
print/foo2zjs: fix runtime problems with paths and sed

* the syntax used for sed is not compatible with all sed
implementations, so depend on gsed and use it on all platforms
* before this, foo2qpdl-wrapper & co. would be searching for CMS
and other files in ${DESTDIR}${PREFIX} instead of ${PREFIX}
* also install crd files (needed for functioning CMS)

PKGREVISION bumped.

Ok@ wiz
   2014-09-24 15:44:21 by Jonathan Perkin | Files touched by this commit (4) 
Log message:
Requires USE_TOOLS+=groff, fix $INSTALL command on SunOS.
   2012-10-08 15:45:50 by Aleksej Saushev | Files touched by this commit (147) 
Log message:
Drop PKG_DESTDIR_SUPPORT setting, "user-destdir" is default these days.
   2012-08-10 18:30:53 by John Marino | Files touched by this commit (2) 
Log message:
print/foo2zjs: Remove bad dependency check of dc

The package assumes that if the dc program doesn't support -V, it must
not support -e either.  This is a bad assumption; DragonFly supports
-e but doesn't support -V.  Rather than try to fix a bad conftest, just
remove it completely.  There's a previous test for dc presence.  If dc
doesn't support -e, let it break during the build rather than before it.
It doesn't take long to build.