Log message:
*: latest py-sphinx only support Python 3.9+

Log message:
py-kubernetes: updated to 27.2.0

v27.2.0

Kubernetes API Version: v1.27.3

Documentation
- Fix request_timeout example and doc. Arg name should be _request_timeout. \ 
Single value type should be int or long.

v27.2.0b1

Kubernetes API Version: v1.27.2

v27.2.0a1

Kubernetes API Version: v1.27.2

API Change
- Added error handling for seccomp localhost configurations that do not properly \ 
set a localhostProfile
- Fixed an issue where kubelet does not set case-insensitive headers for http probes.
- Revised the comment about the feature-gate level for PodFailurePolicy from \ 
alpha to beta
- A fix in the `resource.k8s.io/v1alpha1/ResourceClaim` API avoids harmless (?) \ 
".status.reservedFor: element 0: associative list without keys has an \ 
element that's a map type" errors in the apiserver. Validation now rejects \ 
the incorrect reuse of the same UID in different entries.
- A terminating pod on a node that is not caused by preemption no longer \ 
prevents `kube-scheduler` from preempting pods on that node
 - Rename `PreemptionByKubeScheduler` to `PreemptionByScheduler`
- API: resource.k8s.io/v1alpha1.PodScheduling was renamed to \ 
resource.k8s.io/v1alpha2.PodSchedulingContext.
- Added CEL runtime cost calculation into ValidatingAdmissionPolicy, matching \ 
the evaluation cost
 restrictions that already apply to CustomResourceDefinition.
 If rule evaluation uses more compute than the limit, the API server aborts the \ 
evaluation and the
 admission check that was being performed is aborted; the `failurePolicy` for \ 
the ValidatingAdmissionPolicy
 determines the outcome.
- Added `auditAnnotations` to `ValidatingAdmissionPolicy`, enabling CEL to be \ 
used to add audit annotations to request audit events.
 Added `validationActions` to `ValidatingAdmissionPolicyBinding`, enabling \ 
validation failures to be handled by any combination of the warn, audit and deny \ 
enforcement actions.
- Added `messageExpression` field to `ValidationRule`.
- Added `messageExpression` to `ValidatingAdmissionPolicy`, to set custom \ 
failure message via CEL expression.
- Added a new IPAddress object kind
 - Added a new ClusterIP allocator. The new allocator removes previous Service \ 
CIDR block size limitations for IPv4, and limits IPv6 size to a /64
- Added a new alpha API: ClusterTrustBundle (`certificates.k8s.io/v1alpha1`).
 A ClusterTrustBundle may be used to distribute \ 
[X.509](https://www.itu.int/rec/T-REC-X.509) trust anchors to workloads within \ 
the cluster.
- Added authorization check support to the CEL expressions of \ 
ValidatingAdmissionPolicy via a `authorizer`
 variable with expressions. The new variable provides a builder that allows \ 
expressions such \ 
`authorizer.group('').resource('pods').check('create').allowed()`.
- Added matchConditions field to ValidatingAdmissionPolicy and enabled support \ 
for CEL based custom match criteria.
- Added new option to the `InterPodAffinity` scheduler plugin to ignore existing
 pods` preferred inter-pod affinities if the incoming pod has no preferred inter-pod
 affinities. This option can be used as an optimization for higher scheduling \ 
throughput
 (at the cost of an occasional pod being scheduled non-optimally/violating existing
 pods preferred inter-pod affinities). To enable this scheduler option, set the
 `InterPodAffinity` scheduler plugin arg `ignorePreferredTermsOfExistingPods: true`
- Added the `MatchConditions` field to `ValidatingWebhookConfiguration` and \ 
`MutatingWebhookConfiguration` for the v1beta and v1 apis.

 The `AdmissionWebhookMatchConditions` featuregate is now in Alpha
- Added validation to ensure that if \ 
`service.kubernetes.io/topology-aware-hints` and \ 
`service.kubernetes.io/topology-mode` annotations are both set, they are set to \ 
the same value.Also Added deprecation warning if \ 
`service.kubernetes.io/topology-aware-hints` annotation is used.
- Added warnings about workload resources (Pods, ReplicaSets, Deployments, Jobs, \ 
CronJobs, or ReplicationControllers) whose names are not valid DNS labels.
- Adds feature gate `NodeLogQuery` which provides cluster administrators with a \ 
streaming view of logs using kubectl without them having to implement a client \ 
side reader or logging into the node.
- Api: validation of a `PodSpec` now rejects invalid `ResourceClaim` and \ 
`ResourceClaimTemplate` names. For a pod, the name generated for the \ 
`ResourceClaim` when using a template also must be valid.
- Bump default API QPS limits for Kubelet.
- Enabled the `StatefulSetStartOrdinal` feature gate in beta
- Enabled usage of `kube-proxy`, `kube-scheduler` and `kubelet` HTTP APIs for \ 
changing the logging
  verbosity at runtime for JSON output.
- Encryption of API Server at rest configuration now allows the use of wildcards \ 
in the list of resources.  For example, *.* can be used to encrypt all \ 
resources, including all current and future custom resources.
- Extended the kubelet's PodResources API to include resources allocated in \ 
`ResourceClaims` via `DynamicResourceAllocation`. Additionally, added a new \ 
`Get()` method to query a specific pod for its resources.
- Forbid to set matchLabelKeys when labelSelector is not set in \ 
topologySpreadConstraints
- GCE does not support LoadBalancer Services with ports with different protocols \ 
(TCP and UDP)
- GRPC probes are now a GA feature. `GRPCContainerProbe` feature gate was locked \ 
to default value and will be removed in v1.29. If you were setting this feature \ 
gate explicitly, please remove it now.
- Graduated `Kubelet Topology Manager` to GA.
- Graduated `KubeletTracing` to beta, which means that the feature gate is now \ 
enabled by default.
- Graduated seccomp profile defaulting to GA.

 Set the kubelet `--seccomp-default` flag or `seccompDefault` kubelet \ 
configuration field to `true` to make pods on that node default to using the \ 
`RuntimeDefault` seccomp profile.

 Enabling seccomp for your workload can have a negative performance impact \ 
depending on the kernel and container runtime version in use.

 Guidance for identifying and mitigating those issues is outlined in the \ 
Kubernetes [seccomp tutorial](https://k8s.io/docs/tutorials/security/seccomp).
- Graduated the container resource metrics feature on `HPA` to beta.
- Implemented API streaming for the `watch-cache`

 When `sendInitialEvents` `ListOption` is set together with `watch=true`, it \ 
begins the watch stream with synthetic init events followed by a synthetic \ 
"Bookmark" after which the server continues streaming events.
- Introduced API for streaming.

 Added `SendInitialEvents` field to the `ListOptions`. When the new option is \ 
set together with `watch=true`, it begins the watch stream with synthetic init \ 
events followed by a synthetic "Bookmark" after which the server \ 
continues streaming events.
- Introduced a breaking change to the `resource.k8s.io` API in its \ 
`AllocationResult` struct. This change allows a kubelet plugin for the \ 
`DynamicResourceAllocation` feature to service allocations from multiple \ 
resource driver controllers.
- Introduces new alpha functionality to the reflector, allowing user to enable \ 
API streaming.

 To activate this feature, users can set the `ENABLE_CLIENT_GO_WATCH_LIST_ALPHA` \ 
environmental variable.
 It is important to note that the server must support streaming for this feature \ 
to function properly.
 If streaming is not supported by the server, the reflector will revert to the \ 
previous method
 of obtaining data through LIST/WATCH semantics.
- K8s.io/client-go/tools/record.EventBroadcaster: after Shutdown() is called, \ 
the broadcaster now gives up immediately after a failure to write an event to a \ 
sink. Previously it tried multiple times for 12 seconds in a goroutine.
- K8s.io/component-base/logs: usage of the pflag values in a normal Go flag set \ 
led to panics when printing the help message
- Kubeadm: explicitly set `priority` for static pods with `priorityClassName: \ 
system-node-critical`
- Kubelet: a "maxParallelImagePulls" field can now be specified in the \ 
kubelet configuration file to control how many image pulls the kubelet can \ 
perform in parallel.
- Kubelet: changed `MemoryThrottlingFactor` default value to `0.9` and formulas \ 
to calculate `memory.high`
- Kubernetes components that perform leader election now only support using \ 
`Leases` for this.
- Migrated the `DaemonSet` controller (within `kube-controller-manager`) to use \ 
[contextual \ 
logging](https://k8s.io/docs/concepts/cluster-administration/system-logs/#contextual-logging)
- New `service.kubernetes.io/topology-mode` annotation has been introduced as a \ 
replacement for the `service.kubernetes.io/topology-aware-hints` annotation.
 - `service.kubernetes.io/topology-aware-hints` annotation has been deprecated.
 - kube-proxy now accepts any value that is not "disabled" for these \ 
annotations, enabling custom implementation-specific and/or future built-in \ 
heuristics to be used.
- Pods owned by a Job now uses the labels `batch.kubernetes.io/job-name` and \ 
`batch.kubernetes.io/controller-uid`.
 The legacy labels `job-name` and `controller-uid` are still added for compatibility.
- Promoted `CronJobTimeZone` feature to GA
- Promoted `SelfSubjectReview` to Beta
- Relaxed API validation to allow pod node selector to be mutable for gated pods \ 
(additions only, no deletions or mutations).
- Remove `kubernetes.io/grpc` standard appProtocol
- Remove deprecated `--enable-taint-manager` and `--pod-eviction-timeout` CLI
- Removed support for the `v1alpha1` kubeletplugin API of \ 
`DynamicResourceManagement`. All plugins must be updated to `v1alpha2` in order \ 
to function properly.
- The API server now re-uses data encryption keys while the kms v2 plugin key ID \ 
is stable.  Data encryption keys are still randomly generated on server start \ 
but an atomic counter is used to prevent nonce collisions.
- The PodDisruptionBudget `spec.unhealthyPodEvictionPolicy` field has graduated \ 
to beta and is enabled by default. On servers with the feature enabled, this \ 
field may be set to `AlwaysAllow` to always allow unhealthy pods covered by the \ 
PodDisruptionBudget to be evicted.
- The `DownwardAPIHugePages` kubelet feature graduated to stable / GA.
- The following feature gates for volume expansion GA features have now been \ 
removed and must no longer be referenced in `--feature-gates` flags: \ 
`ExpandCSIVolumes`, `ExpandInUsePersistentVolumes`, `ExpandPersistentVolumes`
- The list-type of the alpha `resourceClaims` field introduced to `Pods` in \ 
`1.26.0` was modified from `set` to `map`, resolving an incompatibility with use \ 
of this schema in `CustomResourceDefinitions` and with server-side apply.
- Updated API reference for Requests, specifying they must not exceed limits
- Updated `KMSv2` to beta
- Updated: Redefine AppProtocol field description and add new standard values
- `/metrics/slis` is now available for control plane components allowing you to \ 
scrape health check metrics.
- `APIServerTracing` feature gate is now enabled by default. Tracing in the API
 Server is still disabled by default, and requires a config file to enable.
- `NodeResourceFit` and `NodeResourcesBalancedAllocation` implement the `PreScore`
 extension point for a more performant calculation.
- `PodSchedulingReadiness` is graduated to beta.
- `PodSpec.Container.Resources` became mutable for CPU and memory resource types.
 - `PodSpec.Container.ResizePolicy` (new object) gives users control over how \ 
their containers are resized.
 - `PodStatus.Resize` status describes the state of a requested Pod resize.
 - `PodStatus.ResourcesAllocated` describes node resources allocated to Pod.
 - `PodStatus.Resources` describes node resources applied to running containers \ 
by CRI.
 - `UpdateContainerResources` CRI API now supports both Linux and Windows.
- `SELinuxMountReadWriteOncePod` graduated to Beta.
- `StatefulSetAutoDeletePVC` feature gate promoted to beta.
- `StatefulSet` names must be DNS labels, rather than subdomains. Any `StatefulSet`
 which took advantage of subdomain validation (by having dots in the name) can't
 possibly have worked, because we eventually set `pod.spec.hostname` from the \ 
`StatefulSetName`,
 and that is validated as a DNS label.
- `ValidatingAdmissionPolicy` now provides a status field that contains results \ 
of type checking the validation expression.
 The type checking is fully informational, and the behavior of the policy is \ 
unchanged.
- `cacheSize` field in `EncryptionConfiguration` is not supported for KMSv2 provider
- `k8s.io/component-base/logs` now also supports adding command line flags to a \ 
`flag.FlagSet`.
- `kubelet`: migrated `--container-runtime-endpoint` and `--image-service-endpoint`
 to kubelet config
- `resource.k8s.io/v1alpha1` was replaced with `resource.k8s.io/v1alpha2`. Before
 upgrading a cluster, all objects in resource.k8s.io/v1alpha1 (ResourceClaim, \ 
ResourceClaimTemplate,
 ResourceClass, PodScheduling) must be deleted. The changes are internal, so
 YAML files which create pods and resource claims don't need changes except for
 the newer `apiVersion`.
- `volumes`: `resource.claims` is now cleared for PVC specs during create or \ 
update of a pod spec with inline PVC template or of a PVC because it has no \ 
effect.
- Added a new alpha API: ClusterTrustBundle (`certificates.k8s.io/v1alpha1`).
 A ClusterTrustBundle may be used to distribute \ 
[X.509](https://www.itu.int/rec/T-REC-X.509) trust anchors to workloads within \ 
the cluster.
- Remove `kubernetes.io/grpc` standard appProtocol
- API: resource.k8s.io/v1alpha1.PodScheduling was renamed to \ 
resource.k8s.io/v1alpha2.PodSchedulingContext.
- APIServerTracing feature gate is now enabled by default. Tracing in the API \ 
Server is still disabled by default, and requires a config file to enable.
- Added CEL runtime cost calculation into ValidatingAdmissionPolicy, matching \ 
the evaluation cost
 restrictions that already apply to CustomResourceDefinition.
 If rule evaluation uses more compute than the limit, the API server aborts the \ 
evaluation and the
 admission check that was being performed is aborted; the `failurePolicy` for \ 
the ValidatingAdmissionPolicy
 determines the outcome.
- Added `messageExpression` to `ValidatingAdmissionPolicy`, to set custom \ 
failure message via CEL expression.
- Added a new IPAddress object kind
 - Added a new ClusterIP allocator. The new allocator removes previous Service \ 
CIDR block size limitations for IPv4, and limits IPv6 size to a /64
- Added a new alpha API: ClusterTrustBundle (`certificates.k8s.io/v1alpha1`).
 A ClusterTrustBundle may be used to distribute \ 
[X.509](https://www.itu.int/rec/T-REC-X.509) trust anchors to workloads within \ 
the cluster.
- Added authorization check support to the CEL expressions of \ 
ValidatingAdmissionPolicy via a `authorizer`
 variable with expressions. The new variable provides a builder that allows \ 
expressions such \ 
`authorizer.group('').resource('pods').check('create').allowed()`.
- Added matchConditions field to ValidatingAdmissionPolicy, enabled support for \ 
CEL based custom match criteria.
- Added messageExpression field to ValidationRule.
- Added the `MatchConditions` field to `ValidatingWebhookConfiguration` and \ 
`MutatingWebhookConfiguration` for the v1beta and v1 apis.

 The `AdmissionWebhookMatchConditions` featuregate is now in Alpha
- Added validation to ensure that if \ 
`service.kubernetes.io/topology-aware-hints` and \ 
`service.kubernetes.io/topology-mode` annotations are both set, they are set to \ 
the same value.
 - Added deprecation warning if `service.kubernetes.io/topology-aware-hints` \ 
annotation is used.
- Adds auditAnnotations to ValidatingAdmissionPolicy, enabling CEL to be used to \ 
add audit annotations to request audit events.
 Adds validationActions to ValidatingAdmissionPolicyBinding, enabling validation \ 
failures to be handled by any combination of the warn, audit and deny \ 
enforcement actions.
- Adds feature gate `NodeLogQuery` which provides cluster administrators with a \ 
streaming view of logs using kubectl without them having to implement a client \ 
side reader or logging into the node.
- Api: validation of a PodSpec now rejects invalid ResourceClaim and \ 
ResourceClaimTemplate names. For a pod, the name generated for the ResourceClaim \ 
when using a template also must be valid.
- Bump default API QPS limits for Kubelet.
- Enable the "StatefulSetStartOrdinal" feature gate in beta
- Extended the kubelet's PodResources API to include resources allocated in \ 
`ResourceClaims` via `DynamicResourceAllocation`. Additionally, added a new \ 
`Get()` method to query a specific pod for its resources.
- Forbid to set matchLabelKeys when labelSelector isn’t set in \ 
topologySpreadConstraints
- GCE does not support LoadBalancer Services with ports with different protocols \ 
(TCP and UDP)
- GRPC probes are now a GA feature. GRPCContainerProbe feature gate was locked \ 
to default value and will be removed in v1.29. If you were setting this feature \ 
gate explicitly, please remove it now.
- Graduate Kubelet Topology Manager to GA.
- Graduate `KubeletTracing` to beta, which means that the feature gate is now \ 
enabled by default.
- Graduate the container resource metrics feature on HPA to beta.
- Introduced a breaking change to the `resource.k8s.io` API in its \ 
`AllocationResult` struct. This change allows a kubelet plugin for the \ 
`DynamicResourceAllocation` feature to service allocations from multiple \ 
resource driver controllers.
- Introduces new alpha functionality to the reflector, allowing user to enable \ 
API streaming.

 To activate this feature, users can set the `ENABLE_CLIENT_GO_WATCH_LIST_ALPHA` \ 
environmental variable.
 It is important to note that the server must support streaming for this feature \ 
to function properly.
 If streaming is not supported by the server, the reflector will revert to the \ 
previous method
 of obtaining data through LIST/WATCH semantics.
- Kubelet: change MemoryThrottlingFactor default value to 0.9 and formulas to \ 
calculate memory.high
- Migrated the DaemonSet controller (within `kube-controller-manager) to use \ 
[contextual \ 
logging](https://k8s.io/docs/concepts/cluster-administration/system-logs/#contextual-logging)
- New `service.kubernetes.io/topology-mode` annotation has been introduced as a \ 
replacement for the `service.kubernetes.io/topology-aware-hints` annotation.
 - `service.kubernetes.io/topology-aware-hints` annotation has been deprecated.
 - kube-proxy now accepts any value that is not "disabled" for these \ 
annotations, enabling custom implementation-specific and/or future built-in \ 
heuristics to be used.
- NodeResourceFit and NodeResourcesBalancedAllocation implement the PreScore \ 
extension point for a more performant calculation.
- Pods owned by a Job will now use the labels `batch.kubernetes.io/job-name` and \ 
`batch.kubernetes.io/controller-uid`.
 The legacy labels `job-name` and `controller-uid` are still added for compatibility.
- Promote CronJobTimeZone feature to GA
- Promoted `SelfSubjectReview` to Beta
- Relax API validation to allow pod node selector to be mutable for gated pods \ 
(additions only, no deletions or mutations).
- Remove deprecated `--enable-taint-manager` and `--pod-eviction-timeout` CLI flags
- Resource.k8s.io/v1alpha1 was replaced with resource.k8s.io/v1alpha2. Before \ 
upgrading a cluster, all objects in resource.k8s.io/v1alpha1 (ResourceClaim, \ 
ResourceClaimTemplate, ResourceClass, PodScheduling) must be deleted. The \ 
changes will be internal, so YAML files which create pods and resource claims \ 
don't need changes except for the newer `apiVersion`.
- SELinuxMountReadWriteOncePod graduated to Beta.
- StatefulSetAutoDeletePVC feature gate promoted to beta.
- The API server now re-uses data encryption keys while the kms v2 plugin's key \ 
ID is stable.  Data encryption keys are still randomly generated on server start \ 
but an atomic counter is used to prevent nonce collisions.
- The API server's encryption at rest configuration now allows the use of \ 
wildcards in the list of resources.  For example, '*.*' can be used to encrypt \ 
all resources, including all current and future custom resources.
- Update KMSv2 to beta
- Updated: Redefine AppProtocol field description and add new standard values
- ValidatingAdmissionPolicy now provides a status field that contains results of \ 
type checking the validation expression.
 The type checking is fully informational, and the behavior of the policy is \ 
unchanged.
- We have removed support for the v1alpha1 kubeletplugin API of \ 
DynamicResourceManagement. All plugins must update to v1alpha2 in order to \ 
function properly going forward.
- Graduated seccomp profile defaulting to GA.

 Set the kubelet `--seccomp-default` flag or `seccompDefault` kubelet \ 
configuration field to `true` to make pods on that node default to using the \ 
`RuntimeDefault` seccomp profile.

 Enabling seccomp for your workload can have a negative performance impact \ 
depending on the kernel and container runtime version in use.

 Guidance for identifying and mitigating those issues is outlined in the \ 
Kubernetes [seccomp tutorial](https://k8s.io/docs/tutorials/security/seccomp).
- Implements API for streaming for the watch-cache

 When sendInitialEvents ListOption is set together with watch=true, it begins \ 
the watch stream with synthetic init events followed by a synthetic \ 
"Bookmark" after which the server continues streaming events.
- Introduce API for streaming.

 Add SendInitialEvents field to the ListOptions. When the new option is set \ 
together with watch=true, it begins the watch stream with synthetic init events \ 
followed by a synthetic "Bookmark" after which the server continues \ 
streaming events.
- Kubelet: a "maxParallelImagePulls" field can now be specified in the \ 
kubelet configuration file to control how many image pulls the kubelet can \ 
perform in parallel.
- PodSchedulingReadiness is graduated to beta.
- In-place resize feature for Kubernetes Pods
 - Changed the Pod API so that the `resources` defined for containers are \ 
mutable for `cpu` and `memory` resource types.
 - Added `resizePolicy` for containers in a pod to allow users control over how \ 
their containers are resized.
 - Added `allocatedResources` field to container status in pod status that \ 
describes the node resources allocated to a pod.
 - Added `resources` field to container status that reports actual resources \ 
applied to running containers.
 - Added `resize` field to pod status that describes the state of a requested \ 
pod resize.
 For details, see KEPs below.
- The PodDisruptionBudget `spec.unhealthyPodEvictionPolicy` field has graduated \ 
to beta and is enabled by default. On servers with the feature enabled, this \ 
field may be set to `AlwaysAllow` to always allow unhealthy pods covered by the \ 
PodDisruptionBudget to be evicted.
- The `DownwardAPIHugePages` kubelet feature graduated to stable / GA.
- Volumes: `resource.claims` gets cleared for PVC specs during create or update \ 
of a pod spec with inline PVC template or of a PVC because it has no effect.
- A fix in the resource.k8s.io/v1alpha1/ResourceClaim API avoids harmless (?) \ 
".status.reservedFor: element 0: associative list without keys has an \ 
element that's a map type" errors in the apiserver. Validation now rejects \ 
the incorrect reuse of the same UID in different entries.
- CacheSize field in EncryptionConfiguration is not supported for KMSv2 provider
- K8s.io/client-go/tools/record.EventBroadcaster: after Shutdown() is called, \ 
the broadcaster now gives up immediately after a failure to write an event to a \ 
sink. Previously it tried multiple times for 12 seconds in a goroutine.
- K8s.io/component-base/logs now also supports adding command line flags to a \ 
flag.FlagSet.
- Update API reference for Requests, specifying they must not exceed limits
- `/metrics/slis` is made available for control plane components allowing you to \ 
scrape health check metrics.
- A terminating pod on a node that is not caused by preemption won't prevent \ 
kube-scheduler from preempting pods on that node
- Rename 'PreemptionByKubeScheduler' to 'PreemptionByScheduler'
- Added new option to the InterPodAffinity scheduler plugin to ignore existing \ 
pods` preferred inter-pod affinities if the incoming pod has no preferred \ 
inter-pod affinities. This option can be used as an optimization for higher \ 
scheduling throughput (at the cost of an occasional pod being scheduled \ 
non-optimally/violating existing pods' preferred inter-pod affinities). To \ 
enable this scheduler option, set the InterPodAffinity scheduler plugin arg \ 
"ignorePreferredTermsOfExistingPods: true".
- Added warnings about workload resources (Pods, ReplicaSets, Deployments, Jobs, \ 
CronJobs, or ReplicationControllers) whose names are not valid DNS labels.
- K8s.io/component-base/logs: usage of the pflag values in a normal Go flag set \ 
led to panics when printing the help message
- Kube-proxy, kube-scheduler and kubelet have HTTP APIs for changing the logging \ 
verbosity at runtime. This now also works for JSON output.
- Kubeadm: explicitly set `priority` for static pods with `priorityClassName: \ 
system-node-critical`
- Kubelet: migrate "--container-runtime-endpoint" and \ 
"--image-service-endpoint" to kubelet config
- Kubernetes components that perform leader election now only support using \ 
Leases for this.
- StatefulSet names must be DNS labels, rather than subdomains.  Any StatefulSet \ 
which took advantage of subdomain validation (by having dots in the name) can't \ 
possibly have worked, because we eventually set `pod.spec.hostname` from the \ 
StatefulSetName, and that is validated as a DNS label.
- The following feature gates for volume expansion GA features have been removed \ 
and must no longer be referenced in `--feature-gates` flags: ExpandCSIVolumes, \ 
ExpandInUsePersistentVolumes, ExpandPersistentVolumes
- The list-type of the alpha resourceClaims field introduced to Pods in 1.26.0 \ 
was modified from "set" to "map", resolving an \ 
incompatibility with use of this schema in CustomResourceDefinitions and with \ 
server-side apply.

Log message:
py-kubernetes: updated to 26.1.0

v26.1.0

Kubernetes API Version: v1.26.1

Bug or Regression
- The timeout unit of the WSClient update method is now always seconds for both \ 
poll and select functions.

Feature
- Adds support for loading CA certificates from a file using the \ 
`idp-certificate-authority` key for the oidc plugin.

Log message:
py-kubernetes: added version 25.3.0

Python client for kubernetes http://kubernetes.io/