./cad/atlc, Calculates the impedance of arbitrary cross section transmission lines

[ CVSweb ] [ Homepage ] [ RSS ] [ Required by ] [ Add to tracker ]

Branch: CURRENT, Version: 4.6.0nb1, Package name: atlc-4.6.0nb1, Maintainer: dmcmahill

Atlc is a finite difference programme that is used to calculate the
properties of a two-conductor electrical transmission line of
arbitrary cross section. It is used whenever there are no analytical
formula known, yet you still require an answer. It can calculate:

The impedance Zo (in Ohms)
The capacitance per unit length (pF/m)
The inductance per unit length (nF/m)
The velocity of propagation v (m/s)
The velocity factor, v/c, which is dimensionless.

A bitmap file (usually with the extension .bmp or .BMP) of the cross
section of the transmission line is drawn in a graphics package such
as The Gimp and then analyzed using Atlc.


Required to build:
[pkgtools/cwrappers]

Master sites:

Filesize: 2388.524 KB

Version history: (Expand)

CVS history: (Expand)


   2021-10-26 12:04:17 by Nia Alarie | Files touched by this commit (63) 
Log message:
cad: Replace RMD160 checksums with BLAKE2s checksums

All checksums have been double-checked against existing RMD160 and
SHA512 hashes
   2021-10-07 15:20:33 by Nia Alarie | Files touched by this commit (63) 
Log message:
cad: Remove SHA1 hashes for distfiles
   2020-01-26 06:26:29 by Roland Illig | Files touched by this commit (189) 
Log message:
all: migrate some SourceForge homepage URLs back from https to http

https://mail-index.netbsd.org/pkgsrc-changes/2020/01/18/msg205146.html

In the above commit, the homepage URLs were migrated from http to https,
assuming that SourceForge would use the same host names for both http and
https connections. This assumption was wrong. Their documentation at
https://sourceforge.net/p/forge/documentation/Custom%20VHOSTs/ states
that the https URLs use the domain sourceforge.io instead.

To make the homepages from the above commit reachable again, pkglint has
been extended to check for reachable homepages. This check is only
enabled when the --network command line option is given.

Each of the homepages that referred to https://$project.sourceforge.net
before was migrated to https://$project.sourceforge.io (27), and if that
was not reachable, to the fallback URL http://$project.sourceforge.net
(163).
   2020-01-19 00:36:14 by Roland Illig | Files touched by this commit (3046) 
Log message:
all: migrate several HOMEPAGEs to https

pkglint --only "https instead of http" -r -F

With manual adjustments afterwards since pkglint 19.4.4 fixed a few
indentations in unrelated lines.

This mainly affects projects hosted at SourceForce, as well as
freedesktop.org, CTAN and GNU.
   2019-06-08 13:04:30 by Roland Illig | Files touched by this commit (43) 
Log message:
cad/*: let pkglint fix indentation, variable alignment, and LOCALBASE

pkglint -Wall -r -F cad

Manually fixed the indentation in cad/ghdl/Makefile because SITES.* was
(by the current definition) not long enough to count as an outlier line,
and because of this, all other lines were aligned to that line.
   2015-11-03 01:21:20 by Alistair G. Crooks | Files touched by this commit (58) 
Log message:
Add SHA512 digests for distfiles for cad category

Problems found with existing distfile for eagle:
	distfiles/eagle-lin32-7.4.0.run
No changes made to eagle/distinfo file.

Otherwise, existing SHA1 digests verified and found to be the same on
the machine holding the existing distfiles (morden).  All existing
SHA1 digests retained for now as an audit trail.
   2012-10-08 15:25:17 by Aleksej Saushev | Files touched by this commit (62) 
Log message:
Drop PKG_DESTDIR_SUPPORT setting, "user-destdir" is default these days.
   2009-06-30 02:07:26 by Joerg Sonnenberger | Files touched by this commit (159) 
Log message:
Mark packages as MAKE_JOBS_SAFE=no that failed in a bulk build with
MAKE_JOBS=2 and worked without.