Log message:
www: Replace RMD160 checksums with BLAKE2s checksums

All checksums have been double-checked against existing RMD160 and
SHA512 hashes

Not committed (merge conflicts):
www/nghttp2/distinfo

Unfetchable distfiles (almost certainly fetched conditionally...):
./www/nginx-devel/distinfo array-var-nginx-module-0.05.tar.gz
./www/nginx-devel/distinfo echo-nginx-module-0.62.tar.gz
./www/nginx-devel/distinfo encrypted-session-nginx-module-0.08.tar.gz
./www/nginx-devel/distinfo form-input-nginx-module-0.12.tar.gz
./www/nginx-devel/distinfo headers-more-nginx-module-0.33.tar.gz
./www/nginx-devel/distinfo lua-nginx-module-0.10.19.tar.gz
./www/nginx-devel/distinfo naxsi-1.3.tar.gz
./www/nginx-devel/distinfo nginx-dav-ext-module-3.0.0.tar.gz
./www/nginx-devel/distinfo nginx-rtmp-module-1.2.2.tar.gz
./www/nginx-devel/distinfo nginx_http_push_module-1.2.10.tar.gz
./www/nginx-devel/distinfo ngx_cache_purge-2.5.1.tar.gz
./www/nginx-devel/distinfo ngx_devel_kit-0.3.1.tar.gz
./www/nginx-devel/distinfo ngx_http_geoip2_module-3.3.tar.gz
./www/nginx-devel/distinfo njs-0.5.0.tar.gz
./www/nginx-devel/distinfo set-misc-nginx-module-0.32.tar.gz
./www/nginx/distinfo array-var-nginx-module-0.05.tar.gz
./www/nginx/distinfo echo-nginx-module-0.62.tar.gz
./www/nginx/distinfo encrypted-session-nginx-module-0.08.tar.gz
./www/nginx/distinfo form-input-nginx-module-0.12.tar.gz
./www/nginx/distinfo headers-more-nginx-module-0.33.tar.gz
./www/nginx/distinfo lua-nginx-module-0.10.19.tar.gz
./www/nginx/distinfo naxsi-1.3.tar.gz
./www/nginx/distinfo nginx-dav-ext-module-3.0.0.tar.gz
./www/nginx/distinfo nginx-rtmp-module-1.2.2.tar.gz
./www/nginx/distinfo nginx_http_push_module-1.2.10.tar.gz
./www/nginx/distinfo ngx_cache_purge-2.5.1.tar.gz
./www/nginx/distinfo ngx_devel_kit-0.3.1.tar.gz
./www/nginx/distinfo ngx_http_geoip2_module-3.3.tar.gz
./www/nginx/distinfo njs-0.5.0.tar.gz
./www/nginx/distinfo set-misc-nginx-module-0.32.tar.gz

Log message:
www: Remove SHA1 hashes for distfiles

Log message:
www/ruby-sass: update to 3.7.4

Update ruby-sass to 3.7.4.

3.7.4 (2019-04-04)

* https-ify sass-lang.com urls.
* Mark as end-of-life.

Log message:
Use https for sass-lang.com.

Log message:
Update ruby-sass to 3.4.24.

3.4.24 (18 May 2017)

* Elements without a namespace (such as div) are no longer unified with
  elements with the empty namespace (such as |div). This unification didn't
  match the results returned by is-superselector(), and was not guaranteed to
  be valid.

Log message:
Update ruby-sass to 3.4.23.

3.4.23 (19 December 2016)

* The Sass logger is now instantiated on a per-thread/per-fiber basis and can
  now be configured to output to any IO object. This can help services and
  processes that wrap Sass compilation reliably extract warnings in a
  concurrent environment.

* Setting the numeric precision by assigning to
  Sass::Script::Value::Number.precision is now thread safe. To set for all
  threads, be sure to set the precision on the main thread.

* Sass cache files will now be world and group writable if your umask allows
  it. Issue #1623

* The supports(...) clause in @import statements now allows bare declarations
  as per the CSS specification. Issue #1967

* Fix a bug where, under some circumstances, str-slice() would go to the end
  of the string even if $end-at was set.

* Fix conversions between numbers with dpi, dpcm, and dppx units. Previously
  these conversions were inverted.

* Support url()s containing quoted strings within unknown directives.

Log message:
Update ruby-sass to 3.4.22.

3.4.22 (28 March 2016)

    * Sass now runs without warnings when running ruby with code style
      warnings enabled.

    * Sass no longer watches the current working directory unless it is on
      the load path or the files being compiled are in the current working
      directory. This was causing performance issues for users with large
      numbers of files in their project directory. Issue #1562, Issue #1966,
      Issue #2006.

    * sass-convert now accepts a -q and --quiet option to disable ouput
      while it is running.

    * Fixed a bug in sass-convert when recursively processing CSS files into
      Sass files which caused the process to crash without processing any
      files. Issue #1827,

Deprecation – Must Read!

    * Support for Ruby 1.8.7 and 1.9.3 is deprecated. See this blog post for
      details.

    * The current handling of CSS variables is deprecated. In order to
      support the CSS spec as fully as possible, no Sass-specific constructs
      other than #{} will be supported in CSS variable values. For
      forwards-compatibility, any SassScript being used in CSS variables
      must be moved into #{}.

Log message:
Update ruby-sass to 3.4.21.

3.4.21 (11 January 2016)

This is a bug fix release.

* Consistent output formatting for numbers close to an integer.
  Issue #1931

* Correctly round negative numbers that were almost but not quite a whole
  number (slightly greater than the negative number).
  Issue #1938

* Don't strip escaped semicolons from compressed output.
  Issue #1932

* Only compress around dashes within nth selectors.
  Issue #1933

* Selector compression of whitespace around commas was affecting attribute
  values.
  Issue #1947

* Make subtraction work when a unit is followed directly by a hyphen and then
  a period. For example, 1em-.75em now returns 0.25em rather than
  1em-0.75em. This is consistent with the behavior when the subtrahend begins
  with a 0.
  Issue #1954

Log message:
Update ruby-sass to 3.4.20.

3.4.20 (09 December 2015)

* Fix a bug with the rounding changes from 3.4.14 and 3.4.15 where some
  negative numbers would incorrectly be rounded up instead of down.
* Better compression for :nth pseudoselectors with subtraction. Issue #1650
* Add support for the new supports() clause for CSS @import directives.
* Rounding numbers now respects Sass’s precision setting for numbers very
  close to half an integer.
* Add support for the q unit, representing one quarter of a millimeter.
* Mitigate a race condition when multiple threads are using the same
  Sass::Plugin object at once.
* In compressed mode, numbers between -1 and 1 now have the leading 0 omitted.
* Source maps now include source ranges for comments.

Deprecation – Must Read!

Certain ways of using #{} without quotes in property and variable values have
been deprecated in order to simplify the feature.

Currently, #{} behaves unpredictably. If it’s used near operators, it will
cause those operators to become part of an unquoted string instead of having
their normal meaning. This isn’t an especially useful feature, and it makes
it hard to reason about some code that includes #{}, so we’re getting rid of
it.

In the new world, #{} just returns an unquoted string that acts like any other
unquoted string. For example, foo + #{$var} will now do the same thing as foo
+ $var, instead of doing the same thing as unquote("foo + #{$var}").

In order to ease the transition, Sass will now emit deprecation warnings for
all uses of #{} that will change behavior in 4.0. We don’t anticipate many
warnings to appear in practice, and you can fix most of them automatically by
running sass-convert --in-place on the affected files.

For more details, see the blog post on the deprecation and the GitHub issue in
which it was planned.

Log message:
Add SHA512 digests for distfiles for www category

Problems found locating distfiles:
	Package haskell-cgi: missing distfile haskell-cgi-20001206.tar.gz
	Package nginx: missing distfile array-var-nginx-module-0.04.tar.gz
	Package nginx: missing distfile encrypted-session-nginx-module-0.04.tar.gz
	Package nginx: missing distfile headers-more-nginx-module-0.261.tar.gz
	Package nginx: missing distfile nginx_http_push_module-0.692.tar.gz
	Package nginx: missing distfile set-misc-nginx-module-0.29.tar.gz
	Package nginx-devel: missing distfile echo-nginx-module-0.58.tar.gz
	Package nginx-devel: missing distfile form-input-nginx-module-0.11.tar.gz
	Package nginx-devel: missing distfile lua-nginx-module-0.9.16.tar.gz
	Package nginx-devel: missing distfile nginx_http_push_module-0.692.tar.gz
	Package nginx-devel: missing distfile set-misc-nginx-module-0.29.tar.gz
	Package php-owncloud: missing distfile owncloud-8.2.0.tar.bz2

Otherwise, existing SHA1 digests verified and found to be the same on
the machine holding the existing distfiles (morden).  All existing
SHA1 digests retained for now as an audit trail.