Log message:
Changes 4.1.1:
* Fix build on systems with PF, such as FreeBSD and OpenBSD.
* Don't blow up if a zero-length link-layer address is passed to
  linkaddr_string().

Changes  4.1.0:
* Fix printing of MAC addresses for VLAN frames with a length
  field
* Add some additional bounds checks and use the EXTRACT_ macros
  more
* Add a -b flag to print the AS number in BGP packets in ASDOT
  notation rather than ASPLAIN notation
* Add ICMPv6 RFC 5006 support
* Decode the access flags in NFS access requests
* Handle the new DLT_ for memory-mapped USB captures on Linux
* Make the default snapshot (-s) the maximum
* Print name of device (when -L is used)
* Support for OpenSolaris (and SXCE build 125 and later)
* Print new TCP flags
* Add support for RPL DIO
* Add support for TCP User Timeout (UTO)
* Add support for non-standard Ethertypes used by 3com PPPoE gear
* Add support for 802.11n and 802.11s
* Add support for Transparent Ethernet Bridge ethertype in GRE
* Add 4 byte AS support for BGP printer
* Add support for the MDT SAFI 66 BG printer
* Add basic IPv6 support to print-olsr
* Add USB printer
* Add printer for ForCES
* Handle frames with an FCS
* Handle 802.11n Control Wrapper, Block Acq Req and Block Ack frames
* Fix TCP sequence number printing
* Report 802.2 packets as 802.2 instead of 802.3
* Don't include -L/usr/lib in LDFLAGS
* On x86_64 Linux, look in lib64 directory too
* Lots of code clean ups
* Autoconf clean ups
* Update testcases to make output changes
* Fix compiling with/out smi (--with{,out}-smi)
* Fix compiling without IPv6 support (--disable-ipv6)

Log message:
Add libsmi option.
Requested by PR#32371.

Log message:
Recursive PKGREVISION bump for jpeg update to 8.

Log message:
Update tcpdump to 4.0.0

Summary for 4.0.0 tcpdump release

Add support for Bluetooth Sniffing
Add support for Realtek Remote Control Protocol (openrrcp.org.ru)
Add support for 802.11 AVS
Add support for SMB over TCP
Add support for 4 byte BGP AS printing
Add support for compiling on case-insensitive file systems
Add support for ikev2 printing
Update support for decoding AFS
Update DHCPv6 printer
Use newer libpcap API's (allows -B option on all platforms)
Add -I to turn on monitor mode
Bugfixes in lldp, lspping, dccp, ESP, NFS printers
Cleanup unused files and various cruft

Per request in PR 40588. Addresses PR 37500 and PR 40203.

Log message:
Add DESTDIR support.

Log message:
Per the process outlined in revbump(1), perform a recursive revbump
on packages that are affected by the switch from the openssl 0.9.7
branch to the 0.9.8 branch. ok jlam@

Log message:
Avoid c99'ism.

Log message:
Update tcpdump to 3.9.7.

(I think that "Summary for 0.9.7 libpcap" below should be read
"Summary for 3.9.7 tcpdump".)

Wed.	July 23, 2007.  mcr@xelerance.com.  Summary for 0.9.7 libpcap release

    	NFS: Print unsigned values as such.
	RX: parse safely.
	BGP: fixes for IPv6-less builds.
	801.1ag: use standard codepoint.
	use /dev/bpf on systems with such a device.
	802.11: print QoS data, avoid dissect of no-data frame, ignore padding.
	smb: make sure that we haven't gone past the end of the captured data.
	smb: squelch an uninitialized complaint from coverity.
	NFS: from NetBSD; don't interpret the reply as a possible NFS reply
		if it got MSG_DENIED.
	BGP: don't print TLV values that didn't fit, from www.digit-labs.org.
	revised INSTALL.txt about libpcap dependancy.

Wed.	April 25, 2007. ken@xelerance.com.  Summary for 3.9.6 tcpdump release
	Update man page to reflect changes to libpcap
	Changes to both TCP and IP Printer Output
	Fix a potential buffer overflow in the 802.11 printer
	Print basic info about a few more Cisco LAN protocols.
	mDNS cleanup
	ICMP MPLS rework of the extension code
	bugfix: use the correct codepoint for the OSPF simple text auth token
	 entry, and use safeputs to print the password.
	Add support in pflog for additional values
	Add support for OIF RSVP Extensions UNI 1.0 Rev. 2 and additional RSVP objects
	Add support for the Message-id NACK c-type.
	Add support for 802.3ah loopback ctrl msg
	Add support for Multiple-STP as per 802.1s
	Add support for rapid-SPT as per 802.1w
	Add support for CFM Link-trace msg, Link-trace-Reply msg,
	 Sender-ID tlv, private tlv, port, interface status
	Add support for unidirectional link detection as per
	 http://www.ietf.org/internet-drafts/draft-foschiano-udld-02.txt
	Add support for the olsr protocol as per RFC 3626 plus the LQ
	 extensions from olsr.org
	Add support for variable-length checksum in DCCP, as per section 9 of
	 RFC 4340.
	Add support for per-VLAN spanning tree and per-VLAN rapid spanning tree
	Add support for Multiple-STP as per 802.1s
	Add support for the cisco propriatry 'dynamic trunking protocol'
	Add support for the cisco proprietary VTP protocol
	Update dhcp6 options table as per IETF standardization activities

Log message:
Update tcpdump to 3.9.5:

Fix compiling on AIX (, at end of ENUM)
Updated list of DNS RR typecodes
Use local Ethernet defs on WIN32
Add support for Frame-Relay ARP
Fixes for compiling under MSVC++
Add support for parsing Juniper .pcap files
Add support for FRF.16 Multilink Frame-Relay (DLT_MFR)
Rework the OSPFv3 printer
Fix printing for 4.4BSD/NetBSD NFS Filehandles
Add support for Cisco style NLPID encapsulation
Add cisco prop. eigrp related, extended communities
Add support for BGP signaled VPLS
Cleanup the bootp printer
Add support for PPP over Frame-Relay
Add some bounds checking to the IP options code, and clean up
the options output a bit.
Add additional modp groups to ISAKMP printer
Add support for Address-Withdraw and Label-Withdraw Msgs
Add support for the BFD Discriminator TLV
Fixes for 64bit compiling
Add support for PIMv2 checksum verification
Add support for further dissection of the IPCP Compression Option
Add support for Cisco's proposed VQP protocol
Add basic support for keyed authentication TCP option
Lots of minor cosmetic changes to output printers

Log message:
Whitespace cleanup, courtesy of pkglint.
Patch provided by Sergey Svishchev in private mail.