Log message:
Remove @dirrm entries from PLISTs

Log message:
Update sysutils/rsnapshot to 1.2.9

VERSION 1.2.9  (May 18 2006)
------------------------------------------------------------------------------
- Added utils/rsnapreport.pl, written by William Bear.
- Detect exit status 23 and 24 from rsync in rsync_cleanup_after_native_cp_al
- Add $! (system error message) to various warning messages in native_cp_al
- Add more examples and comments to rsnapshot.conf.default.in
- In Makefile*, for "make tar", include "t" (testing) in the \ 
tar file.
- Do not strip the trailing slash if it's a remote root filesystem.
  (This was a bug in rsnapshot 1.2.3 if you use "backup host:/  ...")
- Give a more descriptive error message "cannot have a remote \ 
snapshot_root"
  if user tries to configure an ssh path or rsync path as snapshot_root.
- Add some more description to the error "rsnapshot refuses to create
  snapshot_root when no_create_root is enabled", after checking whether
  the snapshot_root is a non-directory file, or just plain non-existent.
- Changed default syslog level to 'info' instead of 'notice'
- Added include_conf directive
- Allowed remote ssh directory paths starting with "~/" as well as \ 
"/".
- Changed rsnapshot maintainer from Nathan Rosenquist to David Cantrell
- David Cantrell <david@cantrell.org.uk> wrote the rsnapshot-diff utility
- Chris Petersen added cwrsync permanent-share support
- Robert Jackson <RobertJ@promedicalinc.com> added use_lazy_deletes
- Added rollback for backup_scripts
- Added rsnapshot-diff to Autoconf/Automake install/build process
- Added sha1sum to utils/sign_packages.sh
- Added a CVS Id to key files
- Fixed exit value for some test invocations
- Added 'rsnapshot diff' front-end to rsnapshot-diff
- Added cmd_rsnapshot_diff
- Added cmd_preexec
- Added cmd_postexec
- Added db prefs examples to utils/backup_mysql.sh and utils/backup_pgsql.sh
- Fixed formatting with email addresses under AUTHORS section of man page
- Added an extra safety check in copy_symlink()
- Fixed swapped config comments about rsync_long_args in
  write_upgrade_config_file()
- Added optional use of the CPAN Lchown module
- Added safe_chown() wrapper to handle chown() calls safely
- Added warning message if we can't properly lchown a symlink
- Added fixes in sync_cp_src_dest() and sync_rm_dest() to properly delete a
  file that is being replaced with a directory
- Fixed error message for dest not being specified in sync_rm_dest()
- Changed skip message level to 2 in rsync_backup_point()
- Added better file type checking in sync_cp_src_dest()
- Removed redundant stat() calls in sync_cp_src_dest() and sync_rm_dest()
- Removed trailing slashes from file paths when calling cp -al subroutines
- Changed show_usage() to use here printing
- Changed strip trailing slash operation in rsync_backup_point() to use
  strip_trailing_slash()
- Fixed incorrect call to cmd_rm_rf() in handle_interval()
- Fixed trailing slash on call to bail() in handle_interval()
- Added sync_first feature (touches a lot of code)
- When link_dest is enabled, rsnapshot will now hunt for the newest available
  directory to use as a link_dest target (up to the oldest directory)
- When use_lazy_deletes is enabled, remove the lockfile before the final
  delete
- Expanded on default (no args) and help messages
- Added show_latest_snapshot() subroutine for shell scripts
- Fixed sync_if_different() to allow alternating directories and files to be
  created with the same names between runs
- Removed redundant line width and indent values in wrap_cmd() calls
- Anthony Ettinger <apwebdesign@yahoo.com> wrote utils/mysqlbackup.pl
- Sherman Boyd wrote utils/random_file_verify.sh

VERSION 1.2.3 (Aug ?? ??:?? 2005)
------------------------------------------------------------------------------
- Fixed a bug introduced in 1.2.2 when rsync is not using --relative
- Fixed a bug where the snapshot_root could be included in backups if
  the root filesystem was being backed up and --relative was not set

VERSION 1.2.2 (Aug 20 18:07 2005)
------------------------------------------------------------------------------
- David Keegel <djk@cybersource.com.au> fixed a race condition in
  add_lockfile()
- David Keegel <djk@cybersource.com.au> improved error reporting when config
  file isn't present
- Provided a workaround for a bug in some versions of rsync which caused
  files to not be deleted properly when the --relative flag was set.

Log message:
Remove USE_PKGINSTALL from pkgsrc now that mk/install/pkginstall.mk
automatically detects whether we want the pkginstall machinery to be
used by the package Makefile.

Log message:
Restore the use of lchown(2) that was lost in the upgrade.
The upgrade instructions are in the INSTALL document, so
install it as well as README.

Log message:
Ran "pkglint --autofix", which corrected some of the quoting issues in
CONFIGURE_ARGS.

Log message:
Update rsnapshot to 1.2.1.  Changes since 1.1.6
Note that config file format has changed, but rsnapshot will detect an
old config and refuse to run until config is updated.

VERSION 1.2.1 (Apr 09 15:10 2005)
------------------------------------------------------------------------------
- Fixed security bug when neither cmd_cp or link_dest are enabled

VERSION 1.2.0 (Jan 31 21:43 2005)
------------------------------------------------------------------------------
- Turned off buffering ($|=1)
- Changed default lockfile to /var/run/rsnapshot.pid, for FHS compliance
- Clarified man page licensing (GPL)
- Fixed is_real_local_abs_path() to handle dangling symlinks
- Changed utils/backup_smb_share.sh to re-order the smbtar arguments
- Added "-uroot" to utils/backup_mysql.sh example file
- Changed regex in is_blank() subroutine
- Changed rsync include/exclude mode to relative
- Peter Palfrader <weasel@debian.org> enhanced error reporting to include
  command line options
- Bharat Mediratta <bharat@menalto.com> improved the exclusion rules to avoid
  backing up the snapshot root. The old way was also kept for users who can't
  or don't want to upgrade their destination paths in their backup points.
- Bharat Mediratta <bharat@menalto.com> added a "+" feature to \ 
the per-backup
  point args to allow additive include/exclude rules.
- Added safe_rename() subroutine to work around a semi-obscure timestamp bug
  in certain Linux kernels
- Clarified error message about local/relative paths in config file parsing
- Added check for leading/trailing spaces in remote (ssh) paths
- Added du(1) and crontab(1) to man page references
- Added config.guess and config.sub for automake
- Changed default destination paths for backup points in example config file
  for compatibility with --relative rsync flag
- Added formatting fix to show one slash only when invoking backup_script
  with link_dest option enabled
- Broke backwards compatibility for the benefit of fixing several outstanding
  issues. The default value for rsync_long_args is now different.
- Changed add_lockfile() verbose message to "echo $$ > \ 
/path/to/lockfile.pid"
  which is actually what the code is doing
- Added check to make sure backup_scripts can't share destination path with
  backup points
- Added check to make sure different backup_script destinations don't overlap
  and don't clobber backup point destinations
- Added "cmd_du" parameter to allow specifying the path to "du"
- Nicolas Kaiser <nikai@nikai.net> provided various typo fixes in the program
  and man page
- Fixed "missing rsync/configtest ok" bug
- Added config_version parameter, which is now required
- All autoconf files were updated with the ones from Debian sarge
- Added upgrade-config-file feature for "make upgrade" target and \ 
manual use
- Added upgrade feature to RPM spec file
- Added check-config-version feature for use with shell scripts, etc.
- Changed version_only argument to version-only, for consistency with new
  options
- Conditionalized configure script to only advise the user to copy the
  rsnapshot.conf.default file to rsnapshot.conf if it's a new installation
- Added rollback feature to restore interval.0 snapshots when using link_dest
- Added second option for du, to compare subdirectories or files
- Added "du_args" to pass arguments to du
- Relaxed cmd line option validation, but only when du is the command
- Now only show command invocation for logger on verbose level 4
- Added rsync cleanup after native_cp_al() to preserve special files
- Removed warning messages from native_cp_al() about special files
- Modified error printing so full run string is displayed once at the top
  of a list of error messages
- Fixed bug in old method of preventing the snapshot root from being backed
  up, which occurred when snapshot root was more than one level down from a
  backup point
- Added commented out du_args to rsnapshot.conf.default.in
- Added descriptive error if "du" fails

Log message:
Get rid of USE_PERL5.  The new way to express needing the Perl executable
around at either build-time or at run-time is:

	USE_TOOLS+=	perl		# build-time
	USE_TOOLS+=	perl:run	# run-time

Also remove some places where perl5/buildlink3.mk was being included
by a package Makefile, but all that the package wanted was the Perl
executable.

Log message:
Create directories before installing files into them.

Log message:
Add RMD160 digests.

Log message:
Yikes, use lchown!