Navigation:
Browse pkgsrc
(this page)
devel openocd
CVSweb ] [ 
Homepage ] [ 
RSS ] [ 
Required by ] [ 
Add to tracker ] 2023-05-17 17:29:13 by nikita | Files touched by this commit (5) |  |
Log message:
openocd: update to version 0.12.0
Changelog:
JTAG Layer:
* add default to adapter speed when unspecified (100 kHz)
* AM335X gpio (BeagleBones) adapter driver
* BCM2835 support for SWD
* Cadence Virtual Debug (vdebug) adapter driver
* CMSIS-DAP support for SWO and SWD multidrop
* Espressif USB JTAG Programmer adapter driver
* Remote bitbang support for Windows host
* ST-LINK add TCP server support to adapter driver
* SWD multidrop support
Boundary Scan:
Target Layer:
* aarch64: support watchpoints
* arm: support independent TPIU and SWO for trace
* arm adi v5: support Large Physical Address Extension
* arm adi v6: support added, for jtag and swd transport
* cortex_a: support watchpoints
* elf 64bit load support
* Espressif: support ESP32, ESP32-S2 and ESP32-S3 cores
* semihosting: support user defined operations
* Xtensa: support Xtensa LX architecture via JTAG and ADIv5 DAP
Flash Layer:
* Atmel/Microchip SAM E51G18A, E51G19A, R35J18B, LAN9255 support
* GigaDevice GD32E23x, GD32F1x0/3x0, GD32VF103 support
* Nuvoton NPCX series support
* onsemi RSL10 support
* Raspberry Pi Pico RP2040 support
* ST BlueNRG-LPS support
* ST STM32 G05x, G06x, G0Bx, G0Cx, U57x, U58x, WB1x, WL5x support
* ST STM32 G0, G4, L4, L4+, L5, WB, WL OTP support
Board, Target, and Interface Configuration Scripts:
* Ampere Computing eMAG8180, Altra ("Quicksilver") and Altra Max \
("Mystique") board config
* Cadence KC705 FPGA (Xtensa Development Platform) via JTAG and ADIv5 DAP board \
config
* Digilent Nexys Video board config
* Espressif ESP32 ETHERNET-KIT and WROVER-KIT board config
* Espressif ESP32 via ESP USB Bridge generic board config
* Espressif ESP32-S2 Kaluga 1 board config
* Espressif ESP32-S2 with ESP USB Bridge board config
* Espressif ESP32-S3 example board config
* Kontron SMARC-sAL28 board config
* LambdaConcept ECPIX-5 board config
* Microchip ATSAMA5D27-SOM1-EK1 board config
* Microchip EVB-LAN9255 board config
* Microchip SAME51 Curiosity Nano board config
* NXP FRDM-K64F, LS1046ARDB and LS1088ARDB board config
* NXP RT6XX board config
* Olimex H405 board config
* Radiona ULX3S board config
* Raspberry Pi 3 and Raspberry Pi 4 model B board config
* Raspberry Pi Pico-Debug board config
* Renesas R-Car V3U Falcon board config
* ST BlueNRG-LPS steval-idb012v1 board config
* ST NUCLEO-8S208RB board config
* ST NUCLEO-G031K8, NUCLEO-G070RB, NUCLEO-G071RB board config
* ST NUCLEO-G431KB, NUCLEO-G431RB, NUCLEO-G474RE board config
* ST STM32MP13x-DK board config
* TI AM625 EVM, AM642 EVM and AM654 EVM board config
* TI J721E EVM, J721S2 EVM and J7200 EVM board config
* Ampere Computing eMAG, Altra ("Quicksilver") and Altra Max \
("Mystique") target config
* Cadence Xtensa generic and Xtensa VDebug target config
* Broadcom BCM2711, BCM2835, BCM2836 and BCM2837 target config
* Espressif ESP32, ESP32-S2 and ESP32-S3 target config
* Microchip ATSAMA5D2 series target config
* NanoXplore NG-Ultra SoC target config
* NXP IMX8QM target config
* NXP LS1028A, LS1046A and LS1088A target config
* NXP RT600 (Xtensa HiFi DSP) target config
* onsemi RSL10 target config
* Raspberry Pi Pico RP2040 target config
* Renesas R8A779A0 V3U target config
* Renesas RZ/Five target config
* Renesas RZ/G2 MPU family target config
* Rockchip RK3399 target config
* ST BlueNRG-LPS target config
* ST STM32MP13x target config
* TI AM625, AM654, J721E and J721S2 target config
* Ashling Opella-LD interface config
* Aspeed AST2600 linuxgpiod based interface config
* Blinkinlabs JTAG_Hat interface config
* Cadence Virtual Debug (vdebug) interface config
* Espressif ESP32-S2 Kaluga 1 board's interface config
* Espressif USB Bridge jtag interface config
* Infineon DAP miniWiggler V3 interface config
* PLS SPC5 interface config
* Tigard interface config
* Lattice MachXO3 family FPGA config
Server Layer:
* GDB: add per-target remote protocol extensions
* GDB: more 'Z' packets support
* IPDBG JtagHost server functionality
* semihosting: I/O redirection to TCP server
* telnet: support for command's autocomplete
RTOS:
* 'none' rtos support
* Zephyr rtos support
Documentation:
Build and Release:
* Add json extension to jimtcl build
* Drop dependency from libusb0
* Drop repository repo.or.cz for submodules
* Move gerrit to https://review.openocd.org/
* Require autoconf 2.69 or newer
* Update jep106 to revision JEP106BF.01
* Update jimtcl to version 0.81
* Update libjaylink to version 0.3.1
* New configure flag '--enable-jimtcl-maintainer' for jimtcl build
This release also contains a number of other important functional and
cosmetic bugfixes. For more details about what has changed since the
last release, see the git repository history:
http://sourceforge.net/p/openocd/code/ci/v0.12.0/log/?path=
For older NEWS, see the NEWS files associated with each release
(i.e. NEWS-<version>).
For more information about contributing test reports, bug fixes, or new
features and device support, please read the new Developer Manual (or
the BUGS and PATCHES.txt files in the source archive).
|
| 2021-10-26 12:20:11 by Nia Alarie | Files touched by this commit (3016) |
Log message: archivers: Replace RMD160 checksums with BLAKE2s checksums All checksums have been double-checked against existing RMD160 and SHA512 hashes Could not be committed due to merge conflict: devel/py-traitlets/distinfo The following distfiles were unfetchable (note: some may be only fetched conditionally): ./devel/pvs/distinfo pvs-3.2-solaris.tgz ./devel/eclipse/distinfo eclipse-sourceBuild-srcIncluded-3.0.1.zip |
| 2021-10-07 15:44:44 by Nia Alarie | Files touched by this commit (3017) |
Log message: devel: Remove SHA1 hashes for distfiles |
| 2021-05-06 23:15:38 by Tobias Nygren | Files touched by this commit (3) |
Log message: openocd: fix build on Linux |
| 2021-05-06 17:31:13 by Tobias Nygren | Files touched by this commit (5) | |
Log message: openocd: update to 0.11 (March 7th, 2021) JTAG Layer: add debug level 4 for verbose I/O debug bitbang, add read buffer to improve performance Cadence SystemVerilog Direct Programming Interface (DPI) adapter driver CMSIS-DAP v2 (USB bulk based) adapter driver Cypress KitProg adapter driver FTDI FT232R sync bitbang adapter driver Linux GPIOD bitbang adapter driver through libgpiod Mellanox rshim USB or PCIe adapter driver Nuvoton Nu-Link and Nu-Link2 adapter drivers NXP IMX GPIO mmap based adapter driver ST-Link consolidate all versions in single config ST-Link read properly old USB serial numbers STLink/V3 support (for ST devices only !) STM8 SWIM transport TI XDS110 adapter driver Xilinx XVC/PCIe adapter driver Target Layer: 64 bit address support ARCv2 target support ARM Cortex-A hypervisor mode support ARM Cortex-M fast PC sampling support for profiling ARM generic CTI support ARM generic mem-ap target support ARMv7-A MMU tools ARMv7m traces add TCP stream server ARMv8 AARCH64 target support and semihosting support ARMv8 AARCH64 disassembler support through capstone library ARMv8-M target support EnSilica eSi-RISC target support, including instruction tracing eSi-Trace support MIPS64 target support Motorola SREC S6 record image file support RISC-V target support SEGGER Real Time Transfer (RTT) initial support (for single target, Cortex-M only) ST STM8 target support Various MIPS32 target improvements Flash Layer: Atheros (ath79) SPI interface support Atmel atmega128rfa1 support Atmel SAM D21, D51, DA1, E51, E53, E54, G55, R30 support Atmel SAMC2?N* support Cypress PSoC5LP, PSoC6 support EnSilica eSi-RISC support Foshan Synwit Tech SWM050 support Maxim Integrated MAX32XXX support Nordic Semiconductor nRF51822, nRF52810, nRF52832 support NXP Kinetis K27, K28, KE1x, KEAx, KL28, KL8x, KV5x, KWx support Renesas RPC HF support SH QSPI support SiFive Freedom E support Silicon Labs EFR-family, EZR32HG support ST BlueNRG support ST STM32 QUAD/OCTO-SPI interface support for Flash, FRAM and EEPROM ST STM32F72x, STM32F4x3, STM32H7xx support ST STM32G0xx, STM32G4xx, STM32L4x, STM32WB, STM32WL support ST STM32L5x support (non secure mode) TI CC13xx, CC26xx, CC32xx support TI MSP432 support Winner Micro w600 support Xilinx XCF platform support Various discrete SPI NOR flashes support Board, Target, and Interface Configuration Scripts: 8devices LIMA board config Achilles Instant-Development Kit Arria 10 board config Amazon Kindle 2 and DX board config Analog Devices ADSP-SC58x, ADSP-SC584-EZBRD board config Andes Technology ADP-XC7KFF676 board config Andes Technology Corvette-F1 board config ARM Musca A board config Arty Spartan 7 FPGA board config Atmel SAMD10 Xplained mini board config Atmel SAMD11 Xplained Pro board config Atmel SAM G55 Xplained Pro board config AVNET UltraZED EG StarterKit board config Blue Pill STM32F103C8 board config DP Busblaster v4.1a board config DPTechnics DPT-Board-v1 board config Emcraft imx8 SOM BSB board config Globalscale ESPRESSObin board config Kasli board config Kintex Ultrascale XCKU040 board config Knovative KC-100 board config LeMaker HiKey board config Microchip (Atmel) SAME54 Xplained Pro board config Microchip (Atmel) SAML11 Xplained Pro board config Nordic module NRF52 board config Numato Lab Mimas A7 board config NXP Freedom FRDM-LS1012A board config NXP IMX7SABRE board config NXP IMX8MP-EVK board config NXP MC-IMX8M-EVK board config QuickLogic QuickFeather board config Renesas R-Car E2, H2, M2 board config Renesas R-Car Salvator-X(S) board config Renesas RZ/A1H GR-Peach board config Rigado BMD-300 board config Sayma AMC board config Sifive e31arty, e51arty, hifive1 board config ST B-L475E-IOT01A board config ST BlueNRG idb007v1, idb008v1, idb011v1 board config ST STM32F412g discovery board config ST STM32F413h discovery board config ST STM32F469i discovery board config ST STM32F7 Nucleo board config ST STM32F723e discovery board config ST STM32F746g discovery board config ST STM32F769i discovery board config ST STM32H735g discovery board config ST STM32H743zi Nucleo board config ST STM32H745i discovery board config ST STM32H747i discovery board config ST STM32H750b discovery board config ST STM32H7b3i discovery board config ST STM32H7x_dual_qspi board config ST STM32H7x3i Eval boards config ST STM32L073 Nucleo board config ST STM32L476g discovery board config ST STM32L496g discovery board config ST STM32L4p5g discovery board config ST STM32L4r9i discovery board config ST STM32L5 Nucleo board config ST STM32MP15x DK2 board config ST STM32WB Nucleo board config ST STM8L152R8 Nucleo board config Synopsys DesignWare ARC EM board config Synopsys DesignWare ARC HSDK board config TI BeagleBone family boards config TI CC13xx, CC26xx, CC32xx LaunchPad board config TI MSP432 LaunchPad board config Tocoding Poplar board config TP-Link WDR4300 board config Allwinner V3s target config Andes Technology NDS V5 target config Atmel atmega128rfa1 target config ARM corelink SSE-200 target config Atheros_ar9344 target config Cypress PSoC5LP, PSoC6 target config EnSilica eSi-RISC target config Foshan Synwit Tech SWM050 target config GigaDevice GD32VF103 target config Hisilicon Hi3798 target config Hisilicon Hi6220 target config Infineon TLE987x target config Marvell Armada 3700 target config Maxim Integrated MAX32XXX target config Mellanox BlueField target config Microchip (Atmel) SAME5x, SAML1x target config NXP IMX6SX, IMX6UL, IMX7, IMX7ULP, IMX8 target config NXP Kinetis KE1xZ, KE1xF target config NXP LPC84x, LPC8Nxx, LS1012A, NHS31xx target config Qualcomm QCA4531 target config QuickLogic EOS S3 target config Renesas R-Car E2, H2, M2 target config Renesas R-Car Gen3 target config Renesas RZ/A1H target config Rockchip RK3308 target config ST BlueNRG target config ST STM32G0, STM32G4, STM32H7, STM32L0, STM32L5 target config ST STM32MP15x target config ST STM32WBx, STM32WLEx target config ST STM8L152, S003, S103, S105 target config Synopsys DesignWare ARC EM target config Synopsys DesignWare ARC HS Development Kit SoC target config TI CC13xx, CC26xx, CC32xx target config TI TNETC4401 target config Xilinx UltraScale+ target config Altera 5M570Z (MAXV family) CPLD config Xilinx Ultrascale, XCF CPLD config Intel (Altera) Arria10 FPGA config Cadence SystemVerilog Direct Programming Interface (DPI) interface config Cypress KitProg interface config Digilent SMT2 NC interface config DLN-2 example of Linux GPIOD interface config FTDI C232HM interface config HIE JTAG Debugger interface config In-Circuit’s ICprog interface config isodebug isolated JTAG/SWD+UART interface config Mellanox rshim USB or PCIe interface config Nuvoton Nu-Link interface config NXP IMX GPIO mmap based interface config Steppenprobe open hardware interface config TI XDS110 interface config Server Layer: 64 bit address support default bind to IPv4 localhost gdb: allow multiple connections gdb: architecture element support gdb: vCont, vRun support telnet: handle Ctrl+A, Ctrl+E and Ctrl+K RTOS: Chromium-EC rtos support hwthread pseudo rtos support NuttX rtos support RIOT rtos support Documentation: Improve STM32 flash driver Various typo fix and improvements |
| 2019-07-08 18:27:13 by Martin Husemann | Files touched by this commit (1) |
Log message: Remove -Werror, so this has a chance to compile on newer gcc versions |
| 2018-03-13 04:01:15 by David A. Holland | Files touched by this commit (3) |
Log message: Patch ctype.h misuse, which for some reason only clang was objecting to. |
| 2018-02-11 01:55:58 by Ryo ONODERA | Files touched by this commit (5) |
Log message:
Update to 0.10.0
* Fix the hardcoded pathes and the flag for libhidapi option
* Tested with STM32F4Discovery board
Changelog:
Highlights of the changes made in the OpenOCD source archive release
JTAG Layer:
New driver for J-Link adapters based on libjaylink
(including support for FPGA configuration, SWO and EMUCOM)
FTDI improvements to work at 30MHz clock
BCM2835 native driver SWD and Raspberry Pi2 support
BCM2835 is set to 4ma drive, slow slew rate
ixo-usb-jtag (emulation of an Altera Bus Blaster I on Cypress FX2 IC)
support
JTAG pass-through mode for CMSIS-DAP (including support for FPGA
configuration)
OpenJTAG support for Cypress CY7C65215
connect_assert_srst support for SWD
Xilinx Virtex-II Series7 bitstream loading support
Use JEP106 data to decode IDs
Deprecated “ft2232″ driver removed (use “ftdi” instead)
GPL-incompatible FTDI D2XX library support dropped (Presto, OpenJTAG and
USB-Blaster I are using libftdi only now)
ZY1000 support dropped (unmaintained since long)
oocd_trace support dropped
Target Layer:
ARMv7-A, Cortex-M, Cortex-A/R important fixes and improvements (allowing
e.g. simultaneous debugging of A8 and M3 cores, JTAG WAIT support etc.)
ARM Cortex-A,R allow interrupt disable during single-step (maskisr command)
Semihosting support for ARMv7-A
ARM Cortex-M7 support
Intel Quark mcu D2000 support
Freescale LS102x SAP support
ThreadX RTOS support on ARM926E-JS
Cortex-M RTOS stack alignment fixes
FreeRTOS FPU support
uC/OS-III RTOS support
bridging semihosting to GDB’s File-I/O support
-defer-examine option added to target create command
verify_image_checksum command added
Flash Layer:
Atmel SAM4S, SAM4N, SAM4C support
Atmel SAMV, SAMS, SAME (Cortex-M7) support
Atmel AT91SAMD handle reset run/halt in DSU, other fixes
Atmel AT91SAML21, SAML22, SAMC20/SAMC21, SAMD09 support
ST STM32F4x support
ST STM32F74x/76x/77x, STM32L4 support
ST STM32L0 categories 1, 2 and 5 support
Kinetis K02, K21, K22, K24, K26, K63, K64, K66 support
Kinetis KE, KVx, K8x families support
Kinetis FlexNVM handling
Kinetis flash protection, security, mass_erase improvements
Infineon XMC4xxx family support
Infineon XMC1000 flash driver
Energy Micro EFM32 Happy Gecko support
Energy Micro EFM32 debug interface lock support
Analog Devices ADuCM360 support
Unified Nuvoton NuMicro flash driver
NIIET K1921VK01T (Cortex-M4) support
Nordic Semiconductor nRF51 improvements
Spansion FM4 flash (including MB9BFx64/x65, S6E2DH) driver
Ambiq Micro Apollo flash driver
PIC32MX new device IDs, 17x/27x flash support
read_bank() and verify_bank() NOR flash internal API to allow reading
(and verifying) non-memory-mapped devices
JTAGSPI driver to access SPI NOR flashes via a trivial FPGA proxy
Milandr read/verify for Info memory support
Various discrete SPI NOR flashes support
CFI 16-bit flash reversed endianness support
Board, Target, and Interface Configuration Scripts:
Digilent JTAG-HS2, JTAG-HS3 interfaces configs
FTDI UM232H module as JTAG interface config
100ask’s OpenJTAG interface config
MBFTDI interface config
XDS100v3 interface config
Freescale Vybrid VF6xx target config
EmCraft VF6 SOM and baseboard configs
Freescale SabreSD board config
Freescale VF65GS10 tower board config
Pipistrello Xilinx Spartan6 LX45 FPGA board config
miniSpartan6+ board config
Xilinx Kintex7 Development board config
Parallella-I board config
Digilent Atlys and Analog Discovery board configs
Numato Opsis board config
Xilinx Spartan 6 FPGA “Device DNA” reading support
Altera 10M50 FPGA (MAX10 family) target config
Altera EPM240 CPLD (MAXII family) target config
Marsohod2, Marsohod3 FPGA, Marsohod CPLD boards configs
Novena’s integrated FPGA board config
XMOS XS1-XAU8A-10′s ARM core config
XMOS xCORE-XA Core Module board config
Exynos5250 target config
Arndale board config
FM4 MB9BFxxx family configs
Spansion SK-FM4-U120-9B560 board config
Diolan LPC4357-DB1 board config
ST STM32F469 discovery board config
ST STM32F7-DISCO, STM327[4|5]6G-EVAL boards configs
ST STM32L4 discovery, NUCLEO L476RG, STM32F429I-DISC1 boards configs
Atheros AR2313, AR2315 targets config
Netgear WP102 board config
La Fonera FON2200 board config
Linksys WAG200G board config
LPC-Link2 board config
NXP LPC4370 target config
Atmel SAMV, SAMS, SAME target configs
Atmel SAM E70 Xplained, SAM V71 Xplained Ultra boards configs
Nordic nRF52 target config
Nordic nRF51-DK, nRF52-DK boards configs
Infineon XMC4700 Relax Kit, XMC4800 Relax EtherCAT Kit, XMC4300 Relax
EtherCAT Kit boards configs
Renesas S7G2 target config
Renesas DK-S7G2 board config
Altera EP3C10 FPGA (Cyclone III family) target config
TI MSP432P4xx target config
Cypress PSoC 5LP target config
Analog Devices ADSP-SC58x target config (Cortex-A5 core only)
Server Layer:
tcl_trace command for async target trace output via Tcl RPC
Build and Release:
Various fixes thanks to http://coccinellery.org
libftdi is now autodetected with pkgconfig
Releases should now support reproducible builds
Conversion to non-recursive make, requires automake >= 1.14
Udev rules modified to add uaccess tag and moved to 60-openocd.rules
Support searching for scripts relative to the openocd binary for all
major architectures
|
New packages: