Log message:
Sync with multimedia/mpv.

Log message:
mpv at the moment needs lua 5.2 or 5.1 for the "lua" option, add
LUA_VERSIONS_INCOMPATIBLE accordingly.

Log message:
Bump version after release. While here also sync with multimedia/mpv (regarding
Darwin support).

Log message:
Bump version after release.

Log message:
Bump version after releases.

Log message:
Use specific version docutils commands.

Log message:
Bump distname and bump the required waf version.

Release 0.8.0
-------------

   Diogo Franco Kovensky released this Feb 17, 2015 · 63 commits to master
   since this release

   Warning: for the first 4 hours of the release, the v0.8.0 tag pointed
   to git master instead of the release. This was fixed later.

Changes
-------

   Changes that may break users' config files have been annotated with a
   (!).
     * (!) vo_opengl_old has been removed. OpenGL rendering now requires
       hardware that can do at least OpenGL 2.1, the oldest version
       supported by vo_opengl.
     * (!) vf_pp has been removed. A version of it can still be accessed
       through lavfilter (e.g. --vf=lavfi=[pp...]), but it receives no QP
       information. Also, vf_dlopen no longer passes QP information to its
       loaded plugin either (it's always 0).
     * (!) vf_softpulldown, vf_swapuv, vf_phase, vf_divtc and vf_ilpack
       have all been removed. Ports or alternative versions of these
       filters are available through libavfilter (vf_lavfi).
     * vf_pullup and vf_noise now are simply wrappers to their libavfilter
       equivalents. Both are only currently available on FFmpeg (not
       Libav).
     * (!) ao_portaudio has been removed. There is good support for the
       native audio drivers of all major desktop platforms, as well as
       ao_sdl and ao_openal as fallbacks.
     * (!) vo_opengl's lscale suboption has been renamed to scale; lradius
       is now scale-radius, lparam1 and lparam2 are now respectively
       scale-param1 and scale-param2; lscale-down is now scale-down. The
       cscale suboption remains as is.
     * (!) Several of the vo_opengl radius-preset aliases supported by
       scale have been removed; use scale-radius to set if needed. For
       example, use --vo=opengl:scale=lanczos:scale-radius=2 instead of
       scale=lanczos2. The default radius is recommended for most filters.
     * (!) vo_opengl no longer supports the stereo suboption. The anaglyph
       effect can be reproduced with the stereo3d filter. The quadbuffer
       support, which requires expensive specialized hardware to begin
       with, is removed.
     * (!) The approx-gamma suboption to vo_opengl has been removed. The
       BT.1886 specification says that it's actually how it's supposed to
       be done so it is now the default when srgb or icc-profile are
       enabled. This does not include BT.1886's gamma drop.
     * (!) The no-scale-sep and indirect suboptions to vo_opengl have been
       removed. These are now autodetected and enabled whenever they would
       have benefit.
     * (!) The --lua and --lua-opts parameters / options are now called
       --script and --script-opts, respectively. The lua subdir of the mpv
       config dir is also now expected to be called scripts instead.
     * (!) The --fixed-vo option has been removed. It has been the default
       for a long time anyway, and disabling fixed-vo is not useful.
     * vo_opengl_hq has been updated to take into account new features.
       fancy-downscaling and sigmoid-upscaling are enabled, "mitchell" is
       now the default for scale-down.
     * The sub-visibility OSD message is now clearer about whether
       subtitles are hidden or just not available / selected.
     * The device IDs given to --audio-device for use with ao_coreaudio
       now use UIDs, so they don't change when devices are added/removed
       or after reboots.
     * --msg-level now also accepts ',' as separator.
     * (Client API) The client API now refuses to initialize if the
       LC_NUMERIC locale is not "C".
     * (Client API) The native type of the msg-level parameter is now a
       key-value list. Setting or reading it as a string still works.
     * (Slave API) The get_property command is now deprecated.
     * Documentation updates.
     * PDF documentation is now disabled by default due to rst2pdf being
       fickle, causing weird build errors.
     * Print desync messages with negative A/V sync as well. While rare,
       it could happen with some uses of --autosync.

Bug fixes
---------

     * (Windows) Avoid resizing the video window when player is minimized,
       might address bug #1547.
     * (NetBSD) Fix build with v4l2.
     * (Linux) Attempt to address conflicts with the pulseaudio mixer.
       (bug #1578)
     * Multiple cdda:// fixes. (bugs #1555, #1560)
     * VP9 timestamps no longer cause "missing PTS" warnings with new
       enough FFmpeg builds.
     * Fix a crash when using H.264 hardware decoding on new enough
       libavcodecs. (bug #1587)

New features
------------

     * vo_opengl now supports frame blending to eliminate stuttering when
       the video framerate does not nicely match the display framerate
       through the smoothmotion suboption. This is not meant to
       artificially increase the video's FPS, so there is no "soap opera
       effect" or difficulties with some video types (e.g. anime).
     * vo_opengl now supports sigmoidal upscaling (e.g. for fullscreen),
       which reduces ringing induced by upscaling, enabled through the
       sigmoid-upscaling suboption.
     * vo_opengl now supports ewa_lanczos (Jinc) scaling, which provides
       higher quality with less aliasing. It supports an experimental
       scale-antiringing parameter, which tries to further reduce video
       ringing.
     * vo_opengl now has a linear-scaling suboption, that makes the
       scalers work in linear light. Implied by the srgb, icc-profile or
       the new sigmoid-upscaling suboption.
     * vo_opengl has improved downscaling for higher downscale ratios when
       fancy-downscaling is enabled.
     * Add --keep-open=always to make --keep-open apply to all files
       instead of only the last.
     * mpv now filters the tags that are printed on the console to try to
       hide useless metadata. The filter works as a whitelist, and can be
       configured with the --display-tags option.
     * Add a --sub-scale-by-window option that, when set to 'no', prevents
       subtitles from changing their pixel size when the window changes
       sizes.
     * vo_opengl now technically has GLES 2 and 3 support (but not GLES
       1). GLES 3 support is only tested on Mesa's software emulation.
       GLES 2 has been tested on nvidia drivers. Both GLES modes are
       feature deficient and inefficient due to GLES limitations, so they
       should not be preferred over the standard OpenGL mode.
     * (X11) vo_opengl now supports the icc-profile-auto option on X11
       hosts.
     * The 'A' key now by default cycles through a list of preset aspect
       ratios. Meant to be used to work around broken files.
     * There is now a "force" mode for --loop. Works like \ 
"inf", but tries
       to open files/streams even if there was an error on the previous
       attempt.
     * There is now a --log-file option to write mpv's log messages to a
       specifed file.
     * There is now a --audio-file-auto option to automatically load an
       external audio file with certain constraints. Will only load
       external audio if the playing file has a video stream. Set to
       "exact" by default. (bug #967)
     * There is now a --network-timeout option to specify a timeout in
       seconds for network access. If 0 (default), uses the libavformat
       default. If a protocol that doesn't support timeouts is used, this
       option is ignored.
     * (X11) The XF86 special keys are now all mappable in input.conf. All
       keys documented in XF86keysym.h are available, but only as their
       numeric codes.
     * (Linux) The DVB implementation now supports DVB-S2 through S2API.
     * (Linux) The VDR format for channels.conf is now supported and
       preferred. See
       http://linuxtv.org/vdrwiki/index.php/Syntax_of_channels.conf for
       the syntax. Tuning to DVB-S2 channels requires the VDR-format
       channels.conf.
     * (Linux) There is now a --dvbin-full-transponder option for handling
       special broadcast cases where PIDs switch, or just to work around
       incomplete PID data.
     * (Client API) There is now an opengl_cb VO, which receives the
       OpenGL context from the libmpv client. This allows a client to
       render libmpv video directly to a provided OpenGL context without
       having to use --wid embedding.
     * (Client API) The aforementioned --wid parameter can now be set at
       any time, but has no effect if a file is already loaded.
     * (Client API) The list of DVD titles can now be queried.
     * (Client API) There is now a filtered-metadata property, containing
       only the tags allowed by --display-tags.
     * (Client API) There is now support for XEmbed --wid targets, such as
       a GtkSocket's gtk_socket_get_id().
     * (Client API) There is now a file-format property with a symbolic
       name for the file format. In some cases this might be a comma
       separated list of various different extensions due to libavformat
       idiosyncrasies.
     * (Client API) There is now a mouse command for generating mouse
       events over the video window.
     * (Client API) There is now a partially-seekable property that
       indicates whether a file is only considered seekable because of the
       stream cache, but would not be seekable otherwise (e.g. realtime
       stream, or HTTP with no resume support). Small relative seeks may
       be fine, but larger seeks will likely fail.
     * (Client API) There is now an MPV_EVENT_QUEUE_OVERFLOW event that is
       posted whenever events have to be dropped because the queue is
       full. No further events are posted until the
       MPV_EVENT_QUEUE_OVERFLOW is consumed to avoid duplicated posting.
     * (Client API) There is now a helper mpv_wait_async_requests()
       function that blocks until all known async requests have completed.
       (bug #1542)
     * (Client API) There is now a detected-hwdec property that returns
       the detected hardware decoder when one is successfully opened. This
       probably only returns a valid value after playback has started.
     * (Client API) There are now audio_add, audio_remove and audio_reload
       counterparts to the equivalent sub_ commands for handling external
       audio files.

Log message:
Bump DISTNAME.